Harbor Freight Multi Load Can Crusher Product Manual

: Harbor-Freight Harbor-Freight-Multi-Load-Can-Crusher-Product-Manual-724026 harbor-freight-multi-load-can-crusher-product-manual-724026 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 6

CAN CRUSHER

Model

95678

ASSEMBLY AND OPERATION INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

Page 2SKU 95678 For technical questions, please call 1-800-444-3353.

SPECIFICATIONS

Overall dimensions - Handle

up: 11-3/4”L X 4-3/4”W

X 17-3/4” H

Maximum Can Holder quantity:

6 cans

Maximum can size: 16 OZ

Wire Basket dimensions:

5-1/8”L X 11-3/8”H X

3-5/16”W

Handle construction: High

impact ABS plastic

Frame construction: Heavy

duty welded sheet steel

Wire Basket construction: Zinc

chrome plated steel Crusher Arm length: 15”

NOTE: This Can Crusher is of heavy duty steel construction and the chrome plated Wire

Basket holds up to six cans for fast crushing action. The 15” long arm gives quick,

easy leverage. Crushed cans drop out of the bottom for fast storage.

Save This Manual

You will need this manual for the safety warnings and precautions, assembly, oper-

ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.

Keep your invoice with this manual. Write the invoice number on the inside of the front

cover. Write the product’s serial number in the back of the manual near the assembly dia-

gram, or write month and year of purchase if product has no number. Keep this manual

and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

PERSONAL SAFETY

Stay alert. Watch what you are doing, and use common sense when operat-

ing.

Dress properly. Loose clothes, jewelry, or long hair can be caught in moving

parts.

Do not overreach. Keep proper footing and balance at all times. Proper footing

and balance enables better control.

1.

2.

3.

Page 3SKU 95678 For technical questions, please call 1-800-444-3353.

Always wear eye protection and work gloves. Always wear ANSI-approved safety

goggles and work gloves when using or performing maintenance on this tool.

TOOL USE AND CARE

Do not force the tool. Do not force this Can Crusher and do not use it for a pur-

pose for which it is not intended.

Maintain tools with care. Tag damaged tools “Do not use” until repaired.

Check for misalignment or binding of moving parts, breakage of parts, and

any other condition that may affect the Can Crusher’s operation. If damaged,

have it serviced before using. Many accidents are caused by poorly maintained

tools.

SERVICE

Tool service must be performed only by qualified repair personnel. Service or

maintenance performed by unqualified personnel could result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instruc-

tions in the “Inspection, Maintenance, And Cleaning” section of this manual.

Use of unauthorized parts or failure to follow maintenance instructions may create

a risk of injury.

SPECIFIC SAFETY RULES

Maintain labels and nameplates on the tool. These carry important information.

If unreadable or missing, contact Harbor Freight Tools for a replacement.

Maintain a safe working environment. Make sure there is adequate space to

operate the Can Crusher.

Wear work gloves when using this Can Crusher to prevent pinching hands

and fingers.

Mount the Can Crusher high enough to prevent small children from using or

playing with this tool. The moving parts can pinch. Children should not be allowed

to use this Can Crusher without adult supervision.

4.

1.

2.

3.

1.

2.

1.

2.

3.

4.

Page 4SKU 95678 For technical questions, please call 1-800-444-3353.

UNPACKING

When unpacking, check to make sure that the item is intact and undamaged. If any

parts are missing or broken, please call Harbor Freight Tools at the number shown on the

cover of this manual as soon as possible.

ASSEMBLY INSTRUCTIONS

Note: This Can Crusher comes assembled. For additional information, refer to the Parts

Diagram near the end of this manual.

MOUNTING INSTRUCTIONS

Remove Can Crusher from its container and mount on a solid surface high enough

to prevent small children from using it.

Remove the Steel Wire Basket (14) by squeezing it together where it joins the Can

Crusher Frame (2). A small amount of pressure will allow the rod ends to release

from their slots and the Steel Wire Basket can be set aside while mounting the Can

Crusher.

Use a pencil to mark where mounting screws will be located.

Preferred method of mounting: Find a vertical stud behind wallboard and fasten

a support board (not included) approximately the same size as the Bottom Plate

(1) to the stud. Secure it with nails (not included), or screws (not included) and

mount the Can Crusher to the support board (not included) using four wood screws

(not included). Always be careful not to nail or screw into hidden electrical wires

or cables.

Alternate method of mounting: Use dry-wall anchors (not included), one in

each corner, and screws (not included) to securely mount the Bottom Plate (1) to

drywall.

Replace the Steel Wire Basket (14) by lining up the rod ends with the holes on the

Can Crusher Frame (2), squeezing the Basket slightly and slipping the rod ends

into the holes.

Usage

The Basket holds up to six cans. The 15” long arm gives quick, easy leverage.

Crushed cans drop out of the bottom of Can Crusher.

INSPECTION, MAINTENANCE, AND CLEANING

BEFORE EACH USE, inspect the general condition of the tool. Check for loose

screws, misalignment or binding of moving parts, cracked or broken parts, and any

1.

2.

3.

4.

5.

6.

1.

Page 5SKU 95678 For technical questions, please call 1-800-444-3353.

other condition that may affect its safe operation. Do not use damaged equip-

ment.

MAINTENANCE CHART

Maintenance Type Before

Use

After

Use Weekly Monthly Every 6

Months Yearly

Inspect Can Crusher for

damage

(see #1, above)

X

Wipe off with clean, moist

cloth X

TROUBLESHOOTING

Problem Possible Causes Probable Solutions

Can Crusher Handle

is hard to move.

Loose Pin, loose rubber bushings,

or loose screws.

1. Check all Screws making sure

nothing is hindering the motion of

the Handle.

1.

PARTS LIST

Part Description Q’ty

1 Bottom Plate 1

2 Can Crusher Frame 1

3 Handle 1

4 Hasp 4

5 Hasp 2

6 Handle Connecting Rod 1

7 Crushing Block 1

Part Description Q’ty

8 Pin 1

9 Screw 1

10 Rubber Bushing 2

11 Threaded Pin 1

12 Joint Pin 1

13 Hose Clamp 1

14 Steel Wire Basket 1

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEM-

BLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER

OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER

THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR

SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER

AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS

SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE

BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS

TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS

OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 6SKU 95678 For technical questions, please call 1-800-444-3353.

ASSEMBLY DIAGRAM

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available

individually as replacement parts.