Harbor Freight Multi Use Transfer Pump Product Manual
2015-05-27
: Harbor-Freight Harbor-Freight-Multi-Use-Transfer-Pump-Product-Manual-723600 harbor-freight-multi-use-transfer-pump-product-manual-723600 harbor-freight pdf
Open the PDF directly: View PDF
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Multi-Use Transfer Pump Item 66418 INSTRUCTIONS AND PRECAUTIONS Specifications Operation Method Hand Pump Dipstick Tubing Size 1/4 IN. D x 47 IN. L Functions Air Pressure Inflation Low Viscosity Fluid Transfer Important Safety Information 1. Wear ANSI-approved safety goggles and heavy-duty work gloves during use. Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1‑800‑444‑3353 as soon as possible. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1‑800‑444‑3353. Manual Revised 11f 2. Keep area clean and well lit. 3. Do not operate when tired or when under the influence of drugs or medication. 4. Do not use your mouth to help siphon flammable liquids. 5. This product is not a toy. Keep away from children. 6. Use as intended only. 7. Inspect before every use; do not use if parts are loose or damaged. 8. Do not smoke in the presence of gasoline or flammable vapors. 9. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. WARNING! After siphoning or transferring gasoline or any flammable material, rinse the pump and hose with detergent to remove flammable fluid and fumes. Note: Refer to the Parts List and Assembly Diagram for the following instructions. Siphoning 1. Insert one end of each of the Orange Hoses (D) into a Connector (A). 2. Insert the Orange Hose ends into the Pump (C) intake and discharge ports and slide the Connectors over the Ports. 3. Put the intake hose (near the pump handle) into the liquid to be pumped. Put the bottom hose into the discharge container. 4. Pump the Handle. Note: The discharge container must be lower than the intake hose. Note: You will have to pump three to four times before the liquid will start to flow. Page 2 Pumping Air 1. Attach a Connector (A) to the Air Pressure Hose (E). 2. Insert the hose into the Pump (C) discharge port. Press firmly into the port. Slide the Connector over the port. 3. Lift up the air chock lever on the Air Pressure Hose, and insert the Inflator Adapter (G) into the chock. Fold back the lever to lock the Adapter. 4. Insert the Adapter into the beach ball or air mattress inflator tube and commence pumping the handle to inflate. Oil/Fuel Transfer 1. Attach the Orange Hoses as instructed in steps 1 and 2 under Siphoning. 2. Squeeze one end of Dipstick Tube (F) into the Tapered Adapter (B) until snug. Insert the free end of the tube into the engine dipstick port and while rotating the tube in either a clockwise or counterclockwise direction, feed the tube in until it bottoms up in the engine sump. 3. Attach the tapered end of the Adapter (B) into the end of Orange Hose of the Intake Port. 4. Put the Hose connected to the discharge port in the target container. 5. Pump the handle to discharge the oil into the container. Note: The end of discharge hose must be located below engine sump. For technical questions, please call 1-800-444-3353. SKU 66418 Record Serial Number Here: Maintenance 1. Before and after each use, inspect the tubes for possible cracks, tears or loose fittings. Replace and/or tighten as needed. 2. Occasionally lubricate the plunger by lifting it to its highest position, placing a few drops of lubricating oil at the plunger base and pumping it a few times. Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. 3. Store in a cool location, away from heat and out of reach of children. Parts List and Assembly Diagram Part A B C D Description Connectors Tapered Adapter Pump Orange Hoses Qty 2 1 1 2 Part E F G Description Qty Air Pressure Hose Dipstick Tube Inflator Adapter 1 1 1 F Intake Port E D C A Discharge Port SKU 66418 For technical questions, please call 1-800-444-3353. B G Page 3 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/ OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:bed3eaf0-b47d-b146-98fe-552d32ea4ed7 Document ID : xmp.did:3D7798AB3B2068118C14E4D2231AA53B Original Document ID : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:3A7798AB3B2068118C14E4D2231AA53B Derived From Document ID : xmp.did:FF7F1174072068118083938105DA3C8D Derived From Original Document ID: adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:7EA511693D20681180839C64BA4E4F1D, xmp.iid:7FA511693D20681180839C64BA4E4F1D, xmp.iid:FA7F1174072068118083938105DA3C8D, xmp.iid:FB7F1174072068118083938105DA3C8D, xmp.iid:FC7F1174072068118083938105DA3C8D, xmp.iid:FD7F1174072068118083938105DA3C8D, xmp.iid:FE7F1174072068118083938105DA3C8D, xmp.iid:FF7F1174072068118083938105DA3C8D, xmp.iid:00801174072068118083938105DA3C8D, xmp.iid:CC8D1DA6122068118083938105DA3C8D, xmp.iid:780470B31820681180839D99F3060A4F, xmp.iid:790470B31820681180839D99F3060A4F, xmp.iid:7A0470B31820681180839D99F3060A4F, xmp.iid:FA8CAC432720681180839D99F3060A4F, xmp.iid:FB8CAC432720681180839D99F3060A4F, xmp.iid:A253E29F3A2068118C14FB08BA0B5CAA, xmp.iid:1D6E37B72B2068118083C56F976E2725, xmp.iid:07801174072068118C1498963D996E8F, xmp.iid:08801174072068118C1498963D996E8F, xmp.iid:20217B9C1D2068118C1498963D996E8F, xmp.iid:23217B9C1D2068118C1498963D996E8F, xmp.iid:3A7798AB3B2068118C14E4D2231AA53B, xmp.iid:3D7798AB3B2068118C14E4D2231AA53B, xmp.iid:100590E71D2068118C14E67FD4FA58F1, xmp.iid:130590E71D2068118C14E67FD4FA58F1, xmp.iid:160590E71D2068118C14E67FD4FA58F1, xmp.iid:B8C318FF1E2068118C14E67FD4FA58F1 History When : 2010:09:29 16:09:49-07:00, 2010:09:29 16:09:49-07:00, 2010:12:20 14:55:43-08:00, 2010:12:20 14:55:43-08:00, 2010:12:20 14:59:50-08:00, 2010:12:20 15:07:13-08:00, 2010:12:20 15:07:23-08:00, 2010:12:20 15:07:23-08:00, 2010:12:20 15:09:32-08:00, 2010:12:20 15:09:32-08:00, 2010:12:22 10:18:45-08:00, 2010:12:22 10:18:52-08:00, 2010:12:22 10:18:52-08:00, 2010:12:22 12:01:07-08:00, 2010:12:22 12:01:07-08:00, 2011:01:04 14:25:20-08:00, 2011:03:22 13:18:55-07:00, 2011:04:08 15:05:59-07:00, 2011:04:08 15:05:59-07:00, 2011:04:08 15:17:01-07:00, 2011:04:08 15:17:28-07:00, 2011:04:11 14:45:10-07:00, 2011:04:11 14:45:10-07:00, 2011:06:01 10:54:25-07:00, 2011:06:01 10:58:14-07:00, 2011:06:01 11:01:57-07:00, 2011:06:01 11:02:14-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2011:06:01 11:02:31-07:00 Modify Date : 2011:06:01 11:02:32-07:00 Metadata Date : 2011:06:01 11:02:32-07:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Doc Change Count : 4211 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 4 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools