Harbor Freight Single Action Strut Spring Compressor Product Manual

Manual for the 43753 Single Action Strut Spring Compressor 43753 Single Action Strut Spring Compressor

2015-05-27

: Harbor-Freight Harbor-Freight-Single-Action-Strut-Spring-Compressor-Product-Manual-723666 harbor-freight-single-action-strut-spring-compressor-product-manual-723666 harbor-freight pdf

Open the PDF directly: View PDF PDF.
Page Count: 8

Scroll down to view the document on your mobile browser.
Strut Spring CompressorItem 43753Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.Visit our website at: http://www.harborfreight.comCopyright© 2000 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.For technical questions or replacement parts, please call 1-800-444-3353.Manual revised 11b
Page 2 For technical questions, please call 1-800-444-3353. SKU 43753SpecicationsCapacity 7″ Coil Spring DiameterMaximum Opening 8″Lead Screw Torque 15 ft-lb minimumCompressor Type MacPherson Struts OnlySave This ManualYou will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.Important Safety InformationIn this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.NOTICE is used to address practices not related to personal injury.CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.Safety Warnings WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury. Save all warnings and instructions for future reference.1. Tighten and release evenly and slowly. Only use hand tools to tighten/release. Do not use any air, electric, or impact tools with this tool. Only operate this tool with a 3/4″ socket and ratchet, 3/4″ combination wrench, or other applicable hand tools. Power, air, or electric tools may compress the spring too quickly, leading to injury.2. Use provided pins to secure spring in place before use.3. Set compressed spring in safe area. Be careful when spring is compressed. Do not drop or jar spring. Doing so might result in the spring forcefully ying free, causing personal injury or damage.4. Do not use on springs larger than 7″ diameter.

Navigation menu