Harbor Freight Stand For Shrinker And Stretcher Machines Product Manual

: Harbor-Freight Harbor-Freight-Stand-For-Shrinker-And-Stretcher-Machines-Product-Manual-723807 harbor-freight-stand-for-shrinker-and-stretcher-machines-product-manual-723807 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 8

SHRINKER AND STRETCHER

STAND

Model

96008

ASSEMBLY AND OPERATION INSTRUCTIONS

Shrinker-Stretcher not included.

Due to continuing improvements, actual product may differ slightly from the product described herein.

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

Page 2SKU 96008 For technical questions, please call 1-800-444-3353.

SPECIFICATIONS

For Use With SKU 95062 Manual Shrinker Stretcher

Overall Height 41-7/8”

Main Post 3-1/4” x 1-5/8” rectangular stock

Mounting Plate 16-1/2” L x 7-1/2” W x 3/8” Thick

Leg Separation 27-1/8”

Leg Width 26-1/8”

Foot Pads Distance from

Ground 1 Ft.

Net Weight 74.7 Lbs.

Foot pedal operation allows you to keep both hands free for handling the

work piece.

Save This Manual

You will need this manual for the safety warnings and precautions, operating, inspec-

tion, maintenance and cleaning procedures, parts list and assembly diagram. Keep your

invoice with this manual. Write the invoice number on the inside of the front cover. Write

the product’s serial number in the back of the manual near the assembly diagram, or write

month and year of purchase if product has no number. Keep this manual and invoice in a

safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

Keep bystanders, children, and visitors away while operating the Shrinker

Stretcher. Distractions can cause you to lose control. Protect others in the work area

from debris such as chips and sparks. Provide barriers or shields as needed.

Stay alert. Watch what you are doing, and use common sense when assembling

this Stand and when using the Shrinker Stretcher. Do not use while tired or

under the influence of drugs, alcohol, or medication. A moment of inattention

while operating this product may result in serious personal injury.

1.

2.

3.

Page 3SKU 96008 For technical questions, please call 1-800-444-3353.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair.

Keep your hair, clothing, and gloves away from moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

Do not overreach. Keep proper footing and balance at all times. Proper foot-

ing and balance enables better control of the Shrinker Stretcher in unexpected

situations.

Use safety equipment. Always wear eye protection. Nonskid safety shoes, hard

hat must be used for appropriate conditions. Always wear ANSI-approved safety

goggles when using or performing maintenance on this tool.

Do not force the tool. Use the correct tool for your application. The correct

tool will do the job better and safer at the rate for which it is designed. Do not force

the tool and do not use the tool for a purpose for which it is not intended.

Store idle tools out of reach of children and other untrained persons. Tools

are dangerous in the hands of untrained users. Never allow children to play with

or climb on this Stand.

Check for misalignment or binding of moving parts, breakage of parts, and any

other condition that may affect the tool’s operation. If damaged, have the tool

serviced before using. Many accidents are caused by poorly maintained tools.

Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may become hazardous

when used on another tool.

When servicing a tool, use only identical replacement parts. Follow instruc-

tions in the “Inspection, Maintenance, And Cleaning” section of this manual.

Use of unauthorized parts or failure to follow maintenance instructions may create

a risk of electric shock or injury.

Maintain labels and nameplates on the tool. These carry important information.

If unreadable or missing, contact Harbor Freight Tools for a replacement.

Maintain a safe working environment. Make sure there is adequate surrounding

workspace. Do not use this product in a damp or wet location.

Do not use the Shrinker Stretcher Stand as a scaffold, ladder or stool. Only

use this product for its intended use.

Make certain to use the Shrinker Stretcher Stand on a flat, level and solid

surface that will support the weight of the Stand and the weight of the work-

piece.

When assembling or moving a heavy or large work piece, always get assis-

tance from other able individuals.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

Page 4SKU 96008 For technical questions, please call 1-800-444-3353.

Make certain that the work area is large enough so that the Shrinker Stretcher

Stand and the workpiece are clear of any walls, furniture and obstacles.

Only use this Stand with SKU 95062 Manual Shrinker Stretcher.

ASSEMBLY INSTRUCTIONS

Note: For additional information regarding the parts listed in the following pages, refer to

the Assembly Diagram near the end of this manual.

Connect each Wheel (6) to Support (4) with Pin (7) and Cotter Pin (8).

Attach Support (4) and Support Leg (13) to the Stand (1) with Bolts (5) and Lock

Nuts (12). Insert each Bolt (5) through the Support (4), the Stand (1) and through

the Support Leg (13), then thread on Lock Nuts (12).

Secure each Clevis (15) to each Shaft (14) with Pin (9), Cotter Pin (16) and Lock

Pin (17)-see Figure 1.

Lock Pin (17)

Figure 1

Clevis (15)

Pin (9) (hidden from view)

Shaft (14)

Secure each Pedal (3) to Frame (1) with Bolt (10) and Lock Nut (2)-see Figure 2.

Bolt (10)

Pedal (3)

Figure 2

Lock Nut (2)

Spring (11)

Stand (1)

17.

18.

1.

2.

3.

4.

Page 5SKU 96008 For technical questions, please call 1-800-444-3353.

Secure Shaft (14) to Pedal (3) with Pin (9), and Lock Pin (17).

Attach Springs (11) to Pedals (3) and Stand (1) as shown in Figure 2.

Bolt (included with SKU

95062)

Frame (1) table

Figure 3

To connect each Shrinker-Stretcher to the Stand, two Bolts are inserted through the

underside of the Frame (1) table and threaded into the bottom of each Shrinker-

Stretcher-see Figure 3. All four Mounting Bolts are included with SKU 95062.

The Clevis (15) will fit in place of the the Shrinker-Stretcher Handle. A Clevis (15)

will fit in place of each Shrinker-Stretcher Handle. Remove the Handle and insert

the Clevis (15) in its place. Insert Pin (18) and Lock Pin (19) to secure Clevis (15)

in its place-see Figure 4.

Clevis (15)

Secure Clevis (15) in place

with Pin (18) and Lock Pin

(19) - not shown

Figure 4

OPERATION INSTRUCTIONS

Follow all instructions in the Assembly and Operation Manual for SKU 95062.

5.

6.

7.

8.

1.

.

95062 Manual Shrinker

Stretcher

Page 6SKU 96008 For technical questions, please call 1-800-444-3353.

To activate each Shrinker-Stretcher, press down on the Pedal with your foot.

INSPECTION, MAINTENANCE, AND CLEANING

BEFORE EACH USE, inspect the general condition of the tool. Check for loose

screws, misalignment or binding of moving parts, cracked or broken parts, and any

other condition that may affect its safe operation. Do not use damaged equip-

ment.

Clean the Shrinker and Stretcher Stand with warm water and a soft cloth. Do not

use flammable detergents or harsh abrasives as they will damage the Stand.

PARTS LIST

Part Description Q’ty

1 Frame 1

2 Lock Nut M12 2

3 Pedal 2

4 Support 1

5 Bolt M16 2

6 Wheel 2

7 Pin 2

8 Cotter Pin 6

9 Pin 4

10 Bolt M12 2

Part Description Q’ty

11 Spring 2

12 Lock Nut M16 2

13 Support Leg 1

14 Shaft 2

15 Clevis 2

17 Lock Pin 4

18 Pin 2

19 Lock Pin 1

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEM-

BLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER

OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER

THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR

SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER

AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS

SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE

BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS

TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS

OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Note: Some parts are listed and shown for illustration purposes only, and are not available

individually as replacement parts.

2.

1.

2.

Page 7SKU 96008 For technical questions, please call 1-800-444-3353.

PARTS AND ASSEMBLY DIAGRAM

18

19

17

Page 8SKU 96008 For technical questions, please call 1-800-444-3353.

LIMITED 90 DAY WARRANTY

Harbor Freight Tools Co. makes every effort to assure that its products meet high

quality and durability standards, and warrants to the original purchaser that this product

is free from defects in materials and workmanship for the period of 90 days from the date

of purchase. This warranty does not apply to damage due directly or indirectly, to misuse,

abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,

improper installation, normal wear and tear, or to lack of maintenance. We shall in no event

be liable for death, injuries to persons or property, or for incidental, contingent, special

or consequential damages arising from the use of our product. Some states do not allow

the exclusion or limitation of incidental or consequential damages, so the above limitation

of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with

transportation charges prepaid. Proof of purchase date and an explanation of the com-

plaint must accompany the merchandise. If our inspection verifies the defect, we will either

repair or replace the product at our election or we may elect to refund the purchase price

if we cannot readily and quickly provide you with a replacement. We will return repaired

products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning

the product.

This warranty gives you specific legal rights and you may also have other rights

which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353