Harman Becker Automotive Systems A041 Car Infotainment System User Manual

Harman Becker Automotive Systems Car Infotainment System

user manual

MMI Navigation System plusOperating ManualAudiVorsprung durch TechnikMMI Navigation System plus Englisch 06.2012MMI Navigation System plusOperating ManualEnglisch 06.2012131.566.3MH.201315663MH20 www.audi.com2 Titel oder Name, Abteilung, Datum
© 2012 AUDI AGAUDI AG works continuously to develop andfurther improve all models. You will appreci-ate that we must therefore reserve the rightto alter any part of the vehicle and its equip-ment or technical specifications at any time.No legal commitment can therefore be im-plied by the information, illustrations or de-scriptions in this Manual.No part of this publication may be reprinted,reproduced or translated without the writtenpermission of AUDI AG. All rights under thelaws of copyright are expressly reserved byAUDI AG. Subject to alteration and amend-ment. Printed in Germany.Date of publication: 20.04.2012For the sake of the environmentThis paper was bleached without use ofchlorine.2 Titel oder Name, Abteilung, Datum
ForewordThank you for choosing the MMI Navigation System plus.Your new Audi is designed with the latest technology, enabling you to control allon-board electronic systems and other settings centrally via the MMI.We recommend that you read this Operating Manual carefully so that you quick-ly become familiar with all the available functions of the MMI and can take fulladvantage of them in everyday use.Please note that this Operating Manual is intended to supplement the informa-tion in the Owner's Manual for your vehicle, so it should only be used in conjunc-tion with the current edition of the Owner's Manual.We wish you safe and enjoyable motoring with your Audi.AUDI AG1315663MH202 Titel oder Name, Abteilung, Datum statements FCC part 15.19 and 15.21: "This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation." "Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment." This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
2 Table of ContentsNotes about this OperatingManual . . . . . . . . . . . . . . . . . . . . . . . . 4Controls . . . . . . . . . . . . . . . . . . . . . . . 5Overview . . . . . . . . . . . . . . . . . . . . . . 5Controls and displays at a glance . . . . 5Notes on traffic safety . . . . . . . . . . . . . 5Cleaning and care . . . . . . . . . . . . . . . . . 6Notes on software licences . . . . . . . . . 6MMI control console . . . . . . . . . . 7Switching the MMI system on/off . . . . 7Adjusting the volume . . . . . . . . . . . . . 7How to use the controls . . . . . . . . . . . . 7MMI touch . . . . . . . . . . . . . . . . . . . . . . 8Speller for letters/numbers . . . . . . . . 9Menus and symbols . . . . . . . . . . . . . . . 10Multi-function steering wheel 12How to use the controls . . . . . . . . . . . . 12Using the telephone . . . . . . . . . . . . . . 13Navigation . . . . . . . . . . . . . . . . . . . . . . 14Listening to the radio . . . . . . . . . . . . . . 15Playing media . . . . . . . . . . . . . . . . . . . . 15Speech dialogue system . . . . . . 17How to use the speech dialoguesystem . . . . . . . . . . . . . . . . . . . . . . . . . 16Notes on the overviews of commands 18Global commands . . . . . . . . . . . . . . . . 18Telephone . . . . . . . . . . . . . . . . . . . . . . . 18Navigation . . . . . . . . . . . . . . . . . . . . . . 19Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 21Media . . . . . . . . . . . . . . . . . . . . . . . . . . 21Media drives/connections . . . . 22Introduction . . . . . . . . . . . . . . . . . . . . . 22Notes . . . . . . . . . . . . . . . . . . . . . . . . . . 22Jukebox . . . . . . . . . . . . . . . . . . . . . . . . . 23DVD drive . . . . . . . . . . . . . . . . . . . . . . . 24SD card readers . . . . . . . . . . . . . . . . . . 24Bluetooth audio players . . . . . . . . . . . . 25Audi music interface . . . . . . . . . . . . . . 25Supported media and file formats . . . 27Troubleshooting . . . . . . . . . . . . . . . . . . 28System settings . . . . . . . . . . . . . . . 29Setting the time/date . . . . . . . . . . . . . 29Adjusting the sound . . . . . . . . . . . . . . . 29Adjusting the system volume . . . . . . . 30Restarting the MMI system (Reset) . . 31Speed display on driving schoolvehicles . . . . . . . . . . . . . . . . . . . . . . . . . 31Other settings . . . . . . . . . . . . . . . . . . . 31Communication . . . . . . . . . . . . . . . 33Telephone . . . . . . . . . . . . . . . . . . . . . 33Introduction . . . . . . . . . . . . . . . . . . . . . 33Bonding a mobile phone . . . . . . . . . . . 33Calling up the telephone . . . . . . . . . . . 35Dialling a telephone number . . . . . . . . 35Answering/ignoring telephone calls . . 36During a telephone call . . . . . . . . . . . . 37Storing a telephone number . . . . . . . . 37Other settings . . . . . . . . . . . . . . . . . . . 38Audi Phone Box . . . . . . . . . . . . . . . . . . 39Directory . . . . . . . . . . . . . . . . . . . . . . 41Calling up the directory . . . . . . . . . . . . 41Storing a contact . . . . . . . . . . . . . . . . . 41Using a contact . . . . . . . . . . . . . . . . . . 42Editing/deleting a contact . . . . . . . . . . 43Importing/exporting contacts . . . . . . 43Other settings . . . . . . . . . . . . . . . . . . . 44Navigation . . . . . . . . . . . . . . . . . . . . . 45Navigation . . . . . . . . . . . . . . . . . . . . . 45Calling up the navigation menu . . . . . 45Entering a destination . . . . . . . . . . . . . 45Starting/stopping route guidance . . . . 48How to use the map . . . . . . . . . . . . . . . 49Calling up traffic information . . . . . . . 50Other settings . . . . . . . . . . . . . . . . . . . 50Entertainment . . . . . . . . . . . . . . . . 54Listening to the radio . . . . . . . . . 54Calling up the radio . . . . . . . . . . . . . . . 54Radio functions . . . . . . . . . . . . . . . . . . 542 Titel oder Name, Abteilung, Datum
3Table of ContentsControlsCommunicationNavigationEntertainmentOther settings . . . . . . . . . . . . . . . . . . . 55Troubleshooting . . . . . . . . . . . . . . . . . . 57Playing media . . . . . . . . . . . . . . . . . 58Calling up the media menu . . . . . . . . . 58Media centre . . . . . . . . . . . . . . . . . . . . 59Other settings . . . . . . . . . . . . . . . . . . . 60Index . . . . . . . . . . . . . . . . . . . . . . . . . . 622 Titel oder Name, Abteilung, Datum
4 Notes about this Operating ManualThis Operating Manual contains important in-formation, tips, suggestions and warnings.Please ensure that this Operating Manual isalways kept in the vehicle. It should always beavailable to anyone else driving the vehicle,i.e. anyone renting, borrowing or buying thevehicle from you.Some sections of this Operating Manual donot apply to all vehicles. If this is the case, atext at the start of the section indicates whichvehicles it applies to, e.g. “Applies to vehicles:with phone pre-installation”. This optional orvehicle-specific equipment is also markedwith an asterisk “*”.Illustrations are intended as a general guide,and may vary from the equipment fitted inyour vehicle in some details.At the beginning of this Operating Manual,you will find a table of contents showing allthe items described in this manual in the or-der in which they appear. An alphabetical in-dex is included at the end of the OperatingManual.All references to positions such as “left”,“right”, “front” or “rear” are given as seen fac-ing in the direction of travel.Optional or vehicle-specific equipment.The section is continued on the followingpage.Registered trademarks are marked ®.However, the absence of this symbol doesnot constitute a waiver of the rights con-cerning any proprietary name.ð Refers to a “WARNING” within the samesection. If the WARNING symbol is followedby a page number the warning text referred tois included in a different section.WARNINGTexts with this symbol contain safety infor-mation. They warn you of serious dangers,possibly involving accident or injury.*®CAUTIONTexts with this symbol draw your attentionto a possible risk of damage to your vehi-cle.For the sake of the environmentTexts with this symbol refer to points rele-vant to the protection of the environment.NoteTexts with this symbol contain additionalinformation of a more general nature.2 Titel oder Name, Abteilung, Datum
5OverviewControlsCommunicationNavigationEntertainmentOverviewControls and displays at a glanceThe Multi Media Interface (MMI) combines different communication, navigation* and entertain-ment systems in your Audi.Fig. 1 MMI controls and displaysYou can operate your MMI system via the MMIcontrol console, the multi-function steeringwheel* or the speech dialogue system*ð Fig. 1:Multi-function steering wheel . 12Driver information system . . . . 12MMI displayButton for folding the MMI dis-play in and outON/OFF button . . . . . . . . . . . . . . 7Buttons for calling up menus di-rectly . . . . . . . . . . . . . . . . . . . . . . 7MMI control console . . . . . . . . . 7Note–Please note that only the MMI and itscomponents are described in this Operat-ing Manual. For more information about1234567your vehicle's equipment and features,please refer to your Owner's Manual.–This manual describes the equipmentavailable for the vehicle at the time ofgoing to print. Some of the equipmentdescribed here will not be available untila later date, or may only be available incertain markets.–The arrangement of the system compo-nents on right-hand drive models* maybe slightly different from the layoutshown in ð Fig. 1. However, the symbolsused to identify the controls are thesame.Notes on traffic safetyYou should only perform important functions,e.g. enter a destination, while the vehicle isstationary. Please always be prepared to stop 2 Titel oder Name, Abteilung, Datum
6 Overviewoperating the system in the interest of yoursafety and that of other road users.WARNING–Today's driving conditions require yourfull attention. As the driver, you have fullresponsibility for the safety of the vehi-cle and other road users. For this reason,only operate the MMI system when thetraffic conditions allow you to do so safe-ly and when you can maintain propercontrol of your vehicle - risk of accident.–The volume of the audio sources (radio,CD player, etc.) should only be set at alevel which enables you to hear distantpolice and emergency vehicles clearly –failure to do so could result in an acci-dent.–Please observe the laws regulating theuse of telephones in vehicles.Cleaning and careFor information on the care and cleaning ofthe infotainment system's controls and dis-plays, please refer to the Cleaning and carechapter of your car's Owner's Manual.Notes on softwarelicencesFor information on the MMI system's softwareand its licence conditions, select: MENU but-ton > control button Setup MMI > Version in-formation > section Software info; or go towww.audi.com/softwareinfo.2 Titel oder Name, Abteilung, Datum
7MMI control consoleControlsCommunicationNavigationEntertainmentMMI control consoleSwitching the MMIsystem on/offThe MMI system is switched on/off automati-cally when the ignition is switched on/off. Inaddition it can be switched on/off manually.–To switch on manually: Briefly press theON/OFF button 5 ð page 5, Fig. 1.–To switch off manually: Press and hold theON/OFF button until the MMI is switchedoff. The MMI system will not be switched onautomatically when the ignition is switchedon if it was turned off manually the lasttime it was operated.When the system is switched on, the last se-lected menu will be displayed, and the last se-lected audio source will be played.The MMI system remains in operative modefor approximately ten minutes after the igni-tion is switched off. If you do not press anybutton or the rotary pushbutton on the MMIcontrol console within this period, the MMIsystem will be switched off automatically.Note–If the engine is switched off and the bat-tery charge level is low, the MMI systemwill be switched off automatically.–You can also switch on the MMI systemmanually by pressing the MENU buttonor one of the buttons for calling up me-nus directly 6 ð page 5, Fig. 1.Adjusting the volumeUsing the ON/OFF button, you can adjust thevolume of an audio source or system message(e.g. during a speech dialogue) directly whileit is being played.–Volume up/down: Turn the ON/OFF buttonclockwise or anti-clockwise.–Mute: Briefly press the ON/OFF button.–Unmute: Briefly press the ON/OFF button orturn the ON/OFF button clockwise.NoteWhen you switch on the MMI system, veryhigh/very low volume levels are automati-cally reduced/increased to a preset level.How to use thecontrolsYou can easily call up the various functions ofthe MMI system with its intuitive and stand-ardised control layout.Fig. 2 How to use the controlsSelecting and confirming a function►A To select a function: Turn the rotarypushbutton to the desired function.►B To confirm the function: Press the rotarypushbutton.Calling up a function in a corner of thedisplay►Press the control button C that corre-sponds to the corner of the display. For in-stance, the top right control button corre-sponds with the top right corner of the dis-play. 2 Titel oder Name, Abteilung, Datum
8 MMI control consoleCalling up the main menu►Press the MENU button. The MMI menus(e.g. Radio) are displayed.Calling up a menu directly►Press the corresponding button 6ð page 5, Fig. 1 towards the menu you wishto open (e.g. RADIO or MEDIA ).Returning to the previous function level►Press the BACK button.MMI touchThe MMI touch pad is located on the surfaceof the rotary pushbutton.Fig. 3 Entering a navigation destinationFig. 4 Display when MMI touch is activeWhen you can operate the system using theMMI touch pad, the MMI screen shows thesymbol A ð Fig. 4 and the ring on the outsideof the touch pad on the rotary pushbuttonlights up.Entering letters, numbers and symbols–Write the character on the touch pad usingyour finger. When the system recognises thecharacter, it will show it on the MMI display1 ð Fig. 3 and read it out loud.–To select a different character: Turn the ro-tary pushbutton clockwise or anti-clockwiseand press it 2.–To enter a space: Move your finger from leftto right across the touch pad.–To delete a character: Move your finger fromright to left across the touch pad.–To end the entry: Press the rotary pushbut-ton.In navigation* mode you can stop enteringcharacters (e.g. for a destination) and jump di-rectly to the selection list (of e.g. the townsfound) by pressing the rotary pushbutton.Finding a contact in the directory–To jump to a particular initial letter in thelist: Write the desired letter on the touchpad with your finger.–To narrow your search: Write further letterson the touch pad with your finger.You can select the function Find contact if youwant to stop entering letters for the contact;you can then jump directly to the selection listof the contacts found by pressing the rotarypushbutton.Moving the map/adjusting the soundfocus–To move the crosshairs on the map: Pressthe rotary pushbutton. The crosshairs willappear on the map. To move the crosshairs,move your finger in the desired direction onthe touch pad.–Alternatively: Put your finger on the corre-sponding area at the edge of the touch pad.–To move the crosshairs of the sound focus:Move your finger in the desired direction onthe touch pad.Browsing through album covers/selectingan album cover–To browse through the album covers: Moveyour finger to the left or right on the touchpad.–To select an album cover: Press the rotarypushbutton. 2 Titel oder Name, Abteilung, Datum
9MMI control consoleControlsCommunicationNavigationEntertainmentOperating the DVD main menu–To select a menu option: Move your fingerup/down or to the left/right on the touchpad.–To confirm your selection: Press the rotarypushbutton.Speller for letters/numbersApplies to vehicles: with phone pre-installation or navigation systemFig. 5 Speller–To enter a letter/number: Turn the rotarypushbutton and use the pointer 1 ð Fig. 5to select the desired letter/number. The se-lected character will appear larger in the se-lection ring 2. Press the rotary pushbuttonto confirm the letter/number. Your entrywill appear in the entry field 13 . When youhave entered all characters, select and con-firm OK 5.–To delete a letter/number: Using the rotarypushbutton, turn the pointer to  9 andpress the rotary pushbutton. To delete allcharacters in the entry field, select  andpress and hold the rotary pushbutton untilall characters have been deleted.–To enter a special character: Press the con-trol button for 0-9 7 ð Fig. 5 and enter thedesired special character (such as a hyphenor full stop) using the speller for numbers.–Input help: In some cases (such as the navi-gation function) certain letters are not avail-able for selection if they are an illogical op-tion. This means that you can only selectthose letters that are offered as a logicalpossibility for this entry.Overview of the symbols in the spellerThe symbols of the speller for letters/num-bers are explained in the following table: Symbol / marking Explanation1Pointer The selected character is highlighted in white and appears largerin the selection ring.2Selection ring The character selected with the pointer appears larger.3To enter a space in the entry field.4To move the cursor in the entry field forwards and backwards.5OK To confirm the entry. 2 Titel oder Name, Abteilung, Datum
10 MMI control console Symbol / marking Explanation6To switch from lower case to upper case letters and vice versa.70-9/A-Z To switch the speller from letters to numbers and vice versa.8List To display a list of suggestions.9/Delete To delete the character to the left of the cursor.10 No. of entries The number of list entries found is displayed.11 List of suggestions E.g. while entering a destination, a list of large towns first andthen other towns in alphabetical order is displayed.12 Cursor The position that is currently being edited is marked.13 Entry field The current entry is displayed.Menus and symbolsFig. 6 Menus and symbols Symbol / marking Explanation1Selected option Selected function2Arrowup/down Further available functions3Mute Audio source muted ð page 74TMC Reception of TMC traffic information5Copying procedure Copying of audio/video files to the jukebox6Time Time setting ð page 297Bluetooth* Bluetooth activated on the MMI ð page 388TP Reception of traffic announcements ð table on page 569Import process Import/update of contacts in the directory/call list10 Bluetooth* Bluetooth device connected ð page 25 / ð page 3311 Signal strength indica-torReception strength of mobile phone network of a connected mo-bile phone ð page 33 2 Titel oder Name, Abteilung, Datum
11MMI control consoleControlsCommunicationNavigationEntertainment Symbol / marking Explanation12 Entry field Entries that can be changed using the speller for letters/num-bers ð page 913 Selection list Settings for the selected function that can be called up by press-ing the rotary pushbutton14 Arrow Submenu with additional functions that can be called up bypressing the rotary pushbutton15 Heading Selected menu (e.g. Telephone)2 Titel oder Name, Abteilung, Datum
12 Multi-function steering wheelMulti-function steeringwheelHow to use thecontrolsApplies to vehicles: with multi-function steering wheelYou can use the multi-function steering wheelto operate a number of MMI functions, adjustthe volume and switch the speech dialoguesystem on/off.Fig. 7 Driver information systemFig. 8 Controls on the multi-function steering wheelImportant: The ignition and the MMI systemmust be switched on ð page 7.1 How to use the driver informationsystemThe driver information system shows informa-tion B in several display tabs A. The driverinformation system can be operated using themulti-function steering wheel:–To switch between tabs: Press the left/rightside of the   button.–To select a function: Scroll the left thumb-wheel to the desired function.–To confirm your selection: Press the leftthumbwheel.–To scroll through lists rapidly: Scroll theleft thumbwheel quickly.–To open/leave a submenu: Press the  but-ton.The equipment installed on your vehicle de-termines which of the following tabs are avail-able:–1st tab: Information on car, assist systems–2nd tab1): Warning/indicator lamps, drivermessages, speed warning–3rd tab: Radio/media ð page 15–4th tab: Telephone* ð page 13–5th tab: Navigation* ð page 142 Steering wheel button–To call up the assigned function: Press the button on the multi-function steeringwheel.–To change the assigned function: On theMMI, select MENU button > Car > controlbutton Car systems* > Vehicle settings >Steering wheel button.3 Adjusting the volumeYou can adjust the volume of an audio sourceor system message (e.g. during a speech dia-logue) directly while it is being played.–Volume up/down: Scroll the right thumb-wheel up/down.–Mute: Press the right thumbwheel.–Unmute: Scroll the right thumbwheel up orpress the right thumbwheel.4 Switching the speech dialogue systemon/off–To switch on: Briefly press the  button onthe multi-function steering wheel. Give aspoken command after the beep signal.–To switch off: Press and hold the  buttonfor several seconds. Or: Say the commandCANCEL.1) The second tab is only visible if one or more warning/indicator lamps or driver messages are displayed or ifthe relevant system is switched on.2 Titel oder Name, Abteilung, Datum
13Multi-function steering wheelControlsCommunicationNavigationEntertainmentFor more information about the speech dia-logue system, refer to ð page 17.5 Navigation cue during active routeguidance*–To have the last navigation cue repeated:Press the  button.–To adjust the volume of the navigationcues: Scroll the right thumbwheel up/downwhile a navigation cue is being played.Using the telephoneOverviewApplies to vehicles: with multi-function steering wheeland phone pre-installationFig. 9 DirectoryImportant: A mobile phone must be connec-ted to the MMI ð page 33, and the tele-phone display tab must be displayedð page 12.The following options are available when youpress the  button:–To call a directory contact: Select Directory.Select and confirm a contact.–To call a contact in the call list: Select Calllist. Select and confirm a contact.Directory contacts: Only directory contacts forwhich a telephone number is stored are dis-played in the driver information system. Ifseveral telephone numbers are stored for onecontact, the list of stored telephone numbersis displayed first when the contact is selected.For more information on the symbols dis-played, refer to ð page 41, Fig. 33.Call list: The call lists contain all received,placed and missed calls ð page 35, Fig. 26.Note–The functions of the telephone can beoperated using the multi-function steer-ing wheel only if the telephone equip-ment was installed at the factory.–The functions of the telephone dependon your mobile phone and whether theyare supported by your mobile networkservice provider.Incoming callApplies to vehicles: with multi-function steering wheeland phone pre-installation►To answer a call: Press the left thumbwheelwhen there is an incoming call.►To ignore a call: Select and confirm Ignorewhen there is an incoming call.►To end a call: Select and confirm End call.Caller information: Depending on whetherthe caller is stored in the directory and wheth-er the telephone number is transmitted withthe call, the name, the telephone number orUnknown will appear on the display of thedriver information system.During a callApplies to vehicles: with multi-function steering wheeland phone pre-installation–To make a further call: Select Hold >  but-ton > Directory or Call list > entry in list.–To answer a further call when you are talk-ing on the phone and have another call onhold: Select Replace. The current call will bereplaced by the incoming call.Other functions are:Microphone off: If you select and confirm thisoption, the caller will no longer be able tohear you; you will still be able to hear the call-er.Hold/Resume: You can put a call on hold andretrieve it from the hold queue later.Switch: You can switch between two phonecalls (one of them will be on hold at any giventime). Select End call to end whichever call is 2 Titel oder Name, Abteilung, Datum
14 Multi-function steering wheelactive. The call on hold will remain in the holdqueue and can be retrieved by selecting Re-sume.Conference: Up to five callers and one calleron hold can take part in a conference (depend-ing on the network service). To set up a fur-ther call, select Hold to place all the membersof an existing conference on hold. You canthen press the  button to place another callto a contact in the directory or the call list. Se-lect Resume if you want to retrieve all partici-pants in an existing conference from the holdqueue.NoteThe option Call waiting must be activatedon your mobile phone for you to be madeaware of incoming calls during a conversa-tion. The call options depend on your mo-bile network service provider. For more in-formation, contact your service provider.NavigationOverviewApplies to vehicles: with multi-function steering wheeland navigation systemImportant: A destination or tour plan musthave been entered ð page 45, the routeguidance function must have been startedð page 48, and the navigation display tabmust be open ð page 12.The following options are available when youpress the  button:–To display the navigation screen whenroute guidance is active: Select Route guid-ance.–To display the compass when route guid-ance is not active: Select Compass.–To cancel the active route guidance: SelectStop route guidance.–To switch off the navigation cues: SelectVoice guidance off.–To start route guidance to the stored homeaddress: If applicable, select Stop routeguidance, and then select Home address.Display when route guidance is activeApplies to vehicles: with navigation systemFig. 10 Display when a lane change is requiredFig. 11 Display when a turn-off is requiredAfter you have entered a destination or a tourand have started route guidance, the naviga-tion display tab is opened in the driver infor-mation system:Distance to turn-offTotal distance to destination/next stopoverEstimated time of arrivalName of motorway, major roador street you are driving on. Ifthe symbol  is displayed infront of the street name, you arebeing directed to turn into thestreet.Arrow indicating direction of up-coming turn-offLane recommendationIf an arrow is displayed, a bargraph will also appear. The few-er bars are displayed, the short-er the distance to the turn-offpoint.If route guidance has not been started, a com-pass is shown in the navigation display tab. 12345672 Titel oder Name, Abteilung, Datum
15Multi-function steering wheelControlsCommunicationNavigationEntertainmentWARNINGThe route calculated by the navigation sys-tem is a recommendation of how best toreach a destination. Pay attention to trafficlights, no-stopping signs, lane change re-strictions, one-way streets, etc.NoteAn exclamation mark “!” in front of thestreet name indicates that the navigationdata of the MMI system do not contain allthe information on this street or streetsection. Pay attention to traffic rules suchas one-way streets or pedestrian zones.Listening to the radioApplies to vehicles: with multi-function steering wheelFig. 12 Radio menuImportant: The radio/media display tab mustbe displayed ð page 12.►To tune to a station from the station list:Select and confirm a radio station.The following options are available when youpress the  button:–To tune to a station from the memory list:Select and confirm Memory and then selectand confirm a radio station.–To set the waveband: Select and confirmthe waveband.–To call up media via the overview of sour-ces: Select and confirm an audio source.Playing mediaApplies to vehicles: with multi-function steering wheelImportant: A media drive must contain audiofiles ð page 22, and the media display tabmust be displayed ð page 12.►To play an audio file: Select and confirm atrack.►To pause/resume playback: Press the rightthumbwheel. To continue playback, pressthe right thumbwheel again.The following options are available when youpress the  button:–To select a source: Select and confirm asource, e.g. Audi music interface.–To call up the radio via the overview ofsources: Select and confirm a waveband.NoteThe MMI media drives do not supportDRM-protected files; these files aremarked with the symbol .2 Titel oder Name, Abteilung, Datum
16 Speech dialogue systemFig. 13 Overview of commands2 Titel oder Name, Abteilung, Datum
17Speech dialogue systemControlsCommunicationNavigationEntertainmentSpeech dialoguesystemHow to use the speechdialogue systemApplies to vehicles: with speech dialogue systemYou can operate many infotainment func-tions conveniently by voice.Fig. 14 Talk button and right thumbwheelImportant: The ignition and the MMI systemmust be switched on ð page 7, you must notbe talking on the phone, and the parking aidmust not be active.►To switch on: Briefly press the  button 1ð Fig. 14 on the multi-function steeringwheel* and give a spoken command afterthe beep signal.►To switch off: Press and hold the  buttonfor several seconds. Or: Say the commandCANCEL.Input helpThe system guides you through the input rou-tine with cues and messages.–Input help messages on screen: After thespeech dialogue system is switched on, theMMI display will show a selection of possi-ble commands.–Spoken input help cues: To have the systemplay the commands currently possible,switch on the speech dialogue system andsay Help.How to help the system understand youSpeak clearly in a normal volume. Speak loud-er if you are driving fast.Speak in a normal tone without long pauses.Avoid speaking when the speech dialogue sys-tem is saying a cue.Close doors, windows and sun roof* to reducebackground noise. Make sure that passengersare not talking when you say a command.Keep the air outlets of the air distribution sys-tem pointed away from the microphone,which is fitted in the vicinity of the front inte-rior lights in the headliner.The system should only be operated by thedriver, since the handsfree microphone is di-rected towards the driver.Other settingsPress the Setup MMI control button to accessthe main menu if you would like to changeother settings, e.g. for the individual speechtraining to adapt the system to your voice,the Command display or the volume of thenavigation cues ð page 31.WARNING–Please direct your full attention to theroad at all times! As the driver, you havefull responsibility for the safety of thevehicle and other road users. For this rea-son, you should only use the functions ina manner that allows you to maintaincontrol of the vehicle in all situations -accident risk!–The speech dialogue system must not beused in cases of emergency, since thevoice changes in stressful situations. Thiscould result in a failed or delayed tele-phone connection. Always dial emergen-cy numbers manually!Note–You can interrupt a spoken cue from thespeech dialogue system any time bypressing the  button; you can now en-ter a new command.–The speech dialogue system can be can-celled and deactivated by pressing any 2 Titel oder Name, Abteilung, Datum
18 Speech dialogue systemone of the buttons on the MMI controlconsole (except the rotary pushbutton).–The dialogue is paused when an incom-ing telephone call is received; you cancontinue the dialogue by ignoring thecall. If you answer the call, the dialoguewill be cancelled.–No navigation cues* or traffic announce-ments are given when a dialogue is run-ning.–The command display can be switchedon/off in the main menu via the SetupMMI control button.–You can select an entry from a list bothvia the speech dialogue system and us-ing the rotary pushbutton.Notes on the overviewsof commandsThe following overviews show you the com-mands that you can give to operate the MMIvia the speech dialogue system.Alternative commands are separated by thesymbol “|”; for example you can say: Tele-phone | (or) Navigation | (or) Radio.Commands that belong together and shouldbe spoken as a sequence are marked with thesymbol “>”; for example you can say: Enteraddress > (and subsequently) Enter country.Global commandsApplies to vehicles: with speech dialogue systemYou can give global commands any time, irre-spective of the menu currently selected.Function Say:Calling up the menu Telephone | Directory | Navigation | Radio | MediaHaving the system play the possi-ble commandsHelp | Help speech Dialogue System | Help Telephone | HelpNavigation | Help Map | Help Radio | Help MediaTelephone functions Call (XY), e.g. Call John Smith |Enter number | Redial | DirectoryNavigation functions Navigate to (XY), e.g. Navigate to John Smith |Enter address | Stop route guidance | MapSelecting an entry from a list Line (XY)Scrolling through a list Next page | Previous pageSwitching off the speech dialoguesystemCancelTelephoneApplies to vehicles: with speech dialogue system and phone pre-installationImportant: A mobile phone must be connec-ted to the MMI ð page 33, and the Tele-phone menu must be open ð page 35.2 Titel oder Name, Abteilung, Datum
19Speech dialogue systemControlsCommunicationNavigationEntertainmentFunction Say:Calling a contact from the direc-toryCall (XY), e.g. Call John SmithDialling a specific number storedfor a contactCall (XY) business | private | land line | mobile,e.g. Call John Smith privateDialling a phone number when anaddress card is openCall | Call business number | Call private number | Call landline | Call mobile business numberDisplaying call list Call listCalling the last number dialled RedialDialling a telephone number Enter number > phone number in blocks of individual digitswhen requested, e.g. 0744 12 345 67 > DialCorrecting an entered phonenumberDelete number | CorrectionDisplaying contact information Directory > desired contact when requested, e.g. John SmithListening to voice mail messages Call mailboxNoteIf you have a mobile phone that transmitsfirst names and surnames separately, youcan select directory contacts both by en-tering the full name (“first name, sur-name” and “surname, first name”) and bysaying only the first name or surname.NavigationApplies to vehicles: with speech dialogue system and navigation systemImportant: The Navigation must be openð page 45.You can say the following commands to entera destination:Function Say:Calling up a navigation list Last destinations | Favourites | Home addressEntering an address with assis-tance from the systemEnter address > follow the directions given by the systemEntering an address directly Enter address > name of town, street and house number,e.g. “London, Edgware Road 132”.Individual commands for enteringa destinationEnter address > Country | Town | Post code | Street | HousenumberEntering a town centre as the des-tinationEnter address > town when requested > Centre > Start routeguidanceNavigating to a contact Navigate to (XY), e.g. Navigate to John SmithNavigating to a specific addressstored for a contactNavigate to (XY) business address | Private address,e.g. Navigate to John Smith business addressStarting route guidance when anaddress card is openNavigate | Navigate to private address | Navigate to busi-ness addressChanging the address while routeguidance is activeEnter address > desired address when requested > confirmnew destination when requested 2 Titel oder Name, Abteilung, Datum
20 Speech dialogue systemFunction Say:Adding a stopover while routeguidance is activeEnter address > desired address when requested > No > con-firm address as new stopover when requestedStarting route guidance afterentering a destinationStart route guidanceCancelling the active route guid-anceStop route guidanceCalculating three alternativeroutesCalculate alternative routesThe following special destinationscan be set directly as the destina-tionNext Audi Service | Next railway station | Next airport |Next hotel | Next hospital | Next parking space | Next serv-ice area | Next restaurant | Next petrol stationChanging the search area forentering a special destinationSpecial destination > Change search area >In immediate vicinity | In vicinity of route | In vicinity ofdestination | In vicinity of stopover | In new town | Nation-wide | In new countryEntering a special destinationin the selected search area withassistance from the systemEnter special destination > Audi Service | Railway station |Airport | Hotel | Hospital | Parking space | Service area |Restaurant | Petrol stationEntering a special destinationin the selected search area directlyEnter special destination > special destination and searcharea, e.g. “Find petrol station in immediate vicinity”You can say the following commands to makeadditional navigation settings:Function Say:General map options Map | Day map | Night map | Additional info off | Intersec-tion map on/offMap type 2D driving position map | 2D north position map | 3D driv-ing position map | Destination map | Overview mapAutomatic map zoom Automatic zoom | Automatic zoom offDisplaying the route list Route listDisplaying remaining distance/timeduring active route guidanceDestination infoSwitching the navigation cues on/off during active route guidanceVoice guidance on | Voice guidance offDynamic traffic avoidance Dynamic traffic avoidance on | Dynamic traffic avoidanceoffRoute criteria Fast route | Eco route | Short routeExcluding the next sectionof the routeExclude routeExcluding a certain section of therouteExclude route for (XY) km 2 Titel oder Name, Abteilung, Datum
21Speech dialogue systemControlsCommunicationNavigationEntertainmentNote–Depending on the selected menu lan-guage and the country you are in, youmay have to spell destinations to enterthem for route guidance.–You can also switch on the speech dia-logue system and say a command whenroute guidance is active and a navigationcue is being played.–Navigation cues are not played during arunning dialogue.RadioApplies to vehicles: with speech dialogue systemImportant: The Radio menu must be openð page 54.Function Say:Selecting a waveband FM | AM | DAB*Tuning to a station from the sta-tion listStation (XY) | Ensemble (XY)a) | Station list > Line (XY)Tuning to a station from thememory listMemory list > Line (XY)Setting the frequency Frequency (XY)Switching the traffic announce-ments on/offTraffic programme on | Traffic programme offa) Applies for the DAB* waveband.MediaApplies to vehicles: with speech dialogue systemImportant: The Media must be openð page 58.Function Say:Selecting a source directly Jukebox | CD | SD card | Audi music interface | Bluetooth |DVDTo select an audio/video* filefrom the jukebox:Video | Playlists | Artist | Album | Tracks | Genres | AlbumbrowserSelecting an audio/video* filefrom an iPod® (source: Audi mu-sic interface)Video* | Playlists | Artist | Album | Tracks | Podcasts | Genres| Composers | AudiobooksNavigating in a structure of fold-ers/listFolder up | Line (XY)2 Titel oder Name, Abteilung, Datum
22 Media drives/connectionsMedia drives/connectionsIntroductionThe MMI system includes various media drivesand connections. For example, you can playaudio/video* files from the jukebox or connecta portable player to the Audi music interfaceand operate it via the MMI.NotesGeneral notesMedia and format limitations: The MMI sys-tem (including the SD card reader and theconnection for the USB mass storage device*)has been tested for use with many of theproducts and media currently available on themarket. However, there may be some devices/media and audio/video* files that are not sup-ported or cannot be played, or the functionali-ty may be limited under certain circumstan-ces.Copyright: Please note that audio/video* filesare copyright-protected.The MMI media drives do not support DRM-protected files; these files are marked withthe symbol .Data storage: Never store important data onSD cards, the jukebox, CDs/DVDs or portableplayers. Audi shall not accept any liabilitywhatsoever for the loss of files or data andmedia.Loading times: The more files, folders or play-lists are stored on a storage device, the longerit will take to load the audio files/video* files.We recommend using a storage device whichcontains only audio/video* files. If you wantto reduce the time it takes to load the audio/video* files, you can create subfolders (e.g. foran artist or album). The loading time will beextended additionally if you are importing da-ta.Additional information: Additional informa-tion stored on audio files (e.g. artists, tracks,album covers) will be displayed automaticallywhen the files are played. If this informationis not stored on the relevant medium, theMMI system will use Gracenote®. Neverthe-less, additional information may not be dis-played in some cases.Restricted functionality: If you experience re-stricted functionality, reset the Media set-tings to the factory defaults ð page 31.For information on the characteristics of thesupported media and file formats, please re-fer to ð page 27.CD/DVD modeCD/DVD and format limitations: In view ofthe variety of CDs/DVDs and the difference inmemory capacities, the functionality may berestricted in the case of some storage devices.Under certain circumstances, audio CDs/videoDVDs that are copy-protected or CDs/DVDsthat do not comply with the standard audioformat, and multisession CDs cannot beplayed at all, or the functionality may be limi-ted. We recommend always finalising theburning process when creating multisessionCDs. Multisession is not supported for DVDs.Handling CDs/DVDs and the DVD drive: Toensure perfect, high-quality playback andavoid read error messages or damage to themedia drive, always store unused CDs/DVDs ina suitable case and do not expose them to di-rect sunlight. Do not use:–Damaged, dirty or scratched CDs/DVDs–Single CDs/DVDs (diameter 8 cm / 3 inches)–Non-circular CDs/DVDs (shape CDs)–CDs/DVDs with stickers–Protective rings–Cleaning disksThermal cut-out: In the case of extremely hotor cold outside temperatures, it is possiblethat the playback of a CD/DVD will temporari-ly not function. A thermostat switch is instal-led to protect the CD/DVD and the reading la-ser. 2 Titel oder Name, Abteilung, Datum
23Media drives/connectionsControlsCommunicationNavigationEntertainmentLaser devices: Laser devices are divided intothe safety classes 1 to 4, as specified by DINIEC 76 (CO) 6/VDE 0837. The optical readersinstalled in your vehicle are classified as safe-ty class 1. Lasers used in devices that fall intothis category are very weak and well screened,so there is no danger if used correctly.Device cover: Never remove the device cover.The device has no components that can beserviced by the owner.JukeboxAudio/video files on a CD/DVD-ROM, on a USBmass storage device or on an SD card can becopied onto the jukebox.►Select: MEDIA button > control buttonSettings > Fill/delete jukebox.The used/free space in the jukebox memory(max. 10 GB) and the number of stored tracksare shown on the MMI display.Filling the jukebox–To select files/folders: Select Copy data tojukebox > source > files/folders. To selectall files/folders, press the control button forAll. Or: Select and confirm a folder, andpress and hold the rotary pushbutton forseveral seconds. All files in the folder will beselected for copying.–To start the copying procedure: Press thecontrol button for Copy. The status of thecopying procedure will be shown on the MMIdisplay, and the corresponding symbol willappear in the status line.–To hide the copying procedure: Select andconfirm Continue copying in background.The copying procedure will be hidden.–To cancel the copying procedure: Select andconfirm Cancel copying procedure. Or: Re-move the source you are importing filesfrom. Files that have already been copiedwill remain stored.During the copying procedure, the audio filesare automatically sorted according to the cat-egories in the media centre based on the addi-tional information stored for the filesð page 59. Video files are copied into theVideos category in the media centre.Deleting the jukeboxImportant: The jukebox must contain audio/video files.–To select files/folders: Select Delete datafrom jukebox > structure of folders in juke-box > files/folders. To select all files/fold-ers, press the control button for All. Or: Se-lect and confirm a folder, and press and holdthe rotary pushbutton for several seconds.All files in the folder will be selected for de-letion.–To delete files/folders: Select the controlbutton for Start deletion > Yes, delete files.The status of the deletion process will beshown on the MMI display. During the dele-tion process the playback of the jukebox isinterrupted; it is started again automaticallyonce the deletion process has been comple-ted.The jukebox is started and operated via theMMI ð page 58.CAUTIONOnly copy audio/video files while the en-gine is running; otherwise the vehicle bat-tery will be discharged.Note–For legal reasons it is not possible tocopy tracks from audio CDs onto thejukebox.–Files that have already been copied arerecognised and greyed out automatical-ly; they will not be copied again.–It is not possible to copy and play audio/video files in the DVD drive at the sametime.–For legal reasons there is no export func-tion for the jukebox.–Files or tracks that do not include storedadditional information are listed as un-known. We recommend marking the au-dio files with the corresponding addi-tional information (e.g. ID3 tags). 2 Titel oder Name, Abteilung, Datum
24 Media drives/connections–When handing over your vehicle e.g. to anew buyer, reset the jukebox to the fac-tory settings ð page 31.DVD driveThe DVD drive is located in the glove box.Fig. 15 DVD drive–To load a CD/DVD: Insert the CD/DVD (textfacing upwards) into the DVD slot 2ð Fig. 15, holding it straight.–To eject a CD/DVD: Press button 1.After it has been ejected, the CD/DVD will bepulled back into the DVD drive automaticallyafter about ten seconds if it is not removedfrom the DVD slot.The DVD drive is started and operated via theMMI ð page 58.CAUTION–Never use any force to push a CD/DVD in-to the drive. The CD/DVD will be drawninto the slot automatically.–Do not insert any CDs/DVDs with stickersinto the media drive. The stickers couldbecome detached from the CD/DVD anddamage the drive.NoteIt is possible that the playback of the CD/DVD may stutter if it contains audio/videofiles with a high data rate.SD card readersThe SD card readers are located in the glovebox.Fig. 16 Inserting SD card–To insert an SD card: Insert the SD card(printed side facing up, contact surface fac-ing down) into the slot of the card reader 1ð Fig. 16. The cut-away corner of the SDcard should be at the front right. Then pushthe SD card into the slot until you feel it en-gage.–To remove the SD card: Briefly press the SDcard to release it.The SD card reader is started and operated viathe MMI ð page 58.CAUTIONOnly use one-piece SD cards. If you useadapter cards (more than one piece), theSD card can become detached from theadapter (e.g. caused by jolting, etc). Partscould then get stuck in the drive, impairingthe functionality of the system.Note–We recommend using SD cards with per-formance category 4 or higher to accessthe audio files as quickly as possible.–Store the SD cards in a suitable case toprotect them from dirt and dust and toavoid damage.2 Titel oder Name, Abteilung, Datum
25Media drives/connectionsControlsCommunicationNavigationEntertainmentBluetooth audioplayersApplies to vehicles: with phone pre-installationBluetooth audio players (e.g. mobile phoneswith integrated audio players) can be connec-ted to the MMI system via Bluetooth.Important: The vehicle must be stationary,and the Bluetooth function of your portableplayer and the Audio player of the MMI sys-tem must be switched on ð page 38.–To bond a Bluetooth audio player: SelectMEDIA button > control button Source >Bluetooth audio player > Connect new BTaudio player. The available Bluetooth audioplayers are displayed. Select and confirmthe desired Bluetooth audio player and thenselect and confirm the Audio player profile.A 4-digit PIN code will appear on the dis-play. Select and confirm Yes and enter thisPIN code on the Bluetooth audio player.–To enter any 4 to 16-digit PIN code, selectand confirm No when the PIN code is dis-played and enter your own personal PINcode on the MMI and then on the Bluetoothaudio player.–Fast bonding (secure simple pairing): Ifyour Bluetooth audio player supports thisfunction, a 6-digit PIN code will be shownon your audio player and on the MMI displaysimultaneously. Confirm this PIN code onthe Bluetooth audio player and on the MMI.Depending on the device you are using, themedia are started and operated using theportable player or the MMI systemð page 58.Note–Pay attention to any connection querieson your Bluetooth audio player.–You have to enter the PIN code once on-ly. Any Bluetooth devices that have al-ready been bonded to the MMI systemonce are connected automatically whenthey are within range.–You can bond several Bluetooth audioplayers to the MMI system; however onlyone connection is active at a time.–The system supports the Bluetooth pro-tocols A2DP and AVRCP (1.0/1.3).–Which media functions are supporteddepends on the Bluetooth audio playeryou are using.–For more information on which devicesare supported, please go online (e.g.www.audi.com/mp3 or www.audi.com/bluetooth) or contact an Audi dealer.Audi music interfaceIntroductionYou can connect your portable player (e.g.MP3 player) to the Audi music interface usingspecial adapter cables*. The adapter cables*are available from Audi dealers or specialistretailers.Fig. 17 Adapter cableA iPod® adapter cable*/iPod® adapter cableplus*B Stereo adapter cable with 3.5 mm jackplug*C Mini USB adapter cable*D Micro USB adapter cable*E USB adapter cable*F AV adapter cable*CAUTIONHandle the adapter cable with care. Makesure the cable does not become pinched ortrapped.2 Titel oder Name, Abteilung, Datum
26 Media drives/connectionsSetupThe Audi music interface is located in the cen-tre console beneath the centre armrest.Fig. 18 Connecting a portable player–To connect an adapter cable: Connect theadapter cable* 3 ð Fig. 18 to the interfaceon the Audi music interface 1 before con-necting the portable player 5 (e.g. iPod®).–To disconnect the adapter cable from theAudi music interface: With the release tab2 pressed, pull the connector off the Audimusic interface.–To disconnect the iPod® adapter cable(plus)* from the iPod®: With the releasetabs 4 pressed, pull the iPod® connectorout of the iPod®.Depending on the device you are using, themedia are started and operated using theportable player or the MMI systemð page 58.CAUTION–To avoid damaging the connection,please take care when detaching the con-nector from the Audi music interface.–Very high or very low temperatures (acommon occurrence in a car's interior)can cause damage to portable playersand/or impair their performance. Pleasedo not leave your portable player in thevehicle in case of extreme temperatures.Note–Do not use USB extension cables oradapters as these impair the functionali-ty.–It cannot be guaranteed that portableplayers which do not meet the specifica-tion USB 2.0 will function via the MMI.–USB hubs are not supported.–The iPod®/iPhone®/iPad® battery ischarged via the iPod® adapter cable(plus)* when the device is connected tothe Audi music interface and the ignitionis switched on.–Use only the iPod® adapter cable (plus)*with red/blue markings to connect aniPod®/iPhone®/iPad®.–Some iPod® versions (e.g. iPod shuffle®)cannot be connected with the iPod®adapter cable (plus)*. You can connectthese devices using the optional adaptercable with 3.5 mm jack plug*.–Some of the iPod®'s control functionsare not supported, such as rating tracks,Cover Flow or adding tracks to “on-the-go” playlists. The iPod® can only displaycovers and play videos if it is connectedvia an iPod® adapter cable plus* (redmarking).–If you would like to play videos, you canalso connect your iPod® with the AVadapter cable*; you will also need an Ap-ple AV cable. Please refer to the iPod®operating instructions for more informa-tion on Apple AV cables.–For more information on the Audi musicinterface and on which devices are sup-ported, please go online (e.g.www.audi.com/mp3 or www.audi.com/bluetooth) or contact an Audi dealer.–iPod®/iPhone®/iPad® malfunctions alsoaffect the operation of the MMI. In thiscase, please reset your iPod®/iPhone®/iPad®.–Please refer to the iPod®/iPhone®/iPad®operating instructions for important in-formation on how to use your iPod®/iPhone®/iPad®. We recommend that youupdate the iPod®/iPhone®/iPad® soft-ware to the latest status.2 Titel oder Name, Abteilung, Datum
27Media drives/connectionsControlsCommunicationNavigationEntertainmentSupported media and file formatsThe following audio/video file specifications are supported by the DVD drive, the jukebox, the SDcard readers and the connection for the USB mass storage device*: Audio files Video filesFile extension .mp3 .wma;.asf.m4a;.m4b;.aac.mpg;.mpeg.avi .mp4;.m4v;.mov.wmvFormat MPEG-1/-2Layer 3WindowsMedia Au-dio 9 and10MPEG-2/-4MPEG-1/-2ISO-MPEG-4;DivX 3, 4and 5;XvidISO-MPEG-4 H.264(MPEG-4AVC)WindowsMediaVideo 9Playlists .M3U; .PLS; .WPL; .M3U8; .ASXFile system SD/SDHC/SDXC/MMC memory cardsUSB mass storage device: exFAT, FAT/FAT32, NTFS file systemUSB mass storage device: max. 4 partitionsDVD drive: ISO9660, Joliet, UDFSpecifica-tionsUp to max. 320 kbit/sec and 48kHz sampling frequencyUp to max. 2000 kbit/sec, 720x576 px. and25 fpsNumberof filesDVD drive: max. 1000 files per directory andmax. 1000 files per playlist;Jukebox (max. 10 GB memory capacity): max. 3000 files can be copied;USB mass storage device and memory cards: max. 1000 files per directory andmax. 1000 files per playlistSupportedmediaSD cards: with a capacity of up to 64 GB;DVD drive: audio CDs (up to 80 minutes), CD-ROMs with a capacity of up to700 MB; DVD±R/RW; standard video DVD and audio DVD compatible with videoDVD;Audi music interface: portable players (e.g. iPod® ð page 25, MTP players, USBmass storage devices belonging to “USB Device Subclass 1 and 6” compatiblewith USB 2.0: USB sticks, USB MP3 players that do not require special driver soft-ware, external USB flash memories and external USB hard drives)Album covers Album covers up to 800x800 px.(GIF, JPG, PNG): depending onavailability the album cover willbe displayed using the corre-sponding medium or Gracenote®. Note–The format Windows Media Audio 9Voice is not supported by the mediadrives.–We recommend a bit rate of at least 160kbit/sec for compressing MP3 files. Inthe case of audio files with variable bitrate, the display of remaining playingtime may differ from the actual figure.–The display of country-specific characters(e.g. for ID3 tag information) dependson the language set on the system; itcannot be ensured that these charactersare displayed correctly. 2 Titel oder Name, Abteilung, Datum
28 Media drives/connections–The manufacturer will provide you withinformation on the “USB Device Sub-class” of a USB memory device.–Some functions of MTP players such asvideo playback and the rating of tracksare not supported.TroubleshootingSubject AdviceAudi music interface/Bluetoothaudio player*: The portableplayer/Bluetooth audio player isnot supported.Please observe the notes on the Audi music interfaceð page 25/Bluetooth audio player* ð page 25. For informationon which devices are supported, please see the Audi mobile de-vice database (www.audi.com/bluetooth).Audi music interface: Whenstarting playback via the adapt-er cable with 3.5 mm jack plug*or AV adapter cable*, the vol-ume is too high/low.Set the volume of the portable player to about 70 percent ofmaximum (Input level) ð page 60.Audi music interface: Problemsduring audio playback via aniPod®/iPhone®/iPad®.The Audio player function is switched on. Switch the functionoff ð page 38 when you are not using a Bluetooth audioplayer*.Audi music interface: Interfer-ence audible when plugging inor unplugging the adapter cablewith 3.5 mm jack plug*/AVadapter cable* or when connect-ing or disconnecting the porta-ble player to the adapter cablewith 3.5 mm jack plug*/AVadapter cable*.Audi music interface is already selected as the source whenconnecting/disconnecting the adapter cable/portable player.Activate the mute function or another audio source (e.g. radioð page 54) before connecting and disconnecting the porta-ble player.Jukebox: The tracks in the im-ported playlist are greyed out.When importing playlists, you must copy all files yourself.Media centre: Imported trackscannot be played or cannot befound.If you cannot find imported tracks via the media centre, thiscould mean that they are not supported and have been moved.To free up some memory space, select the control button forSettings > Fill/delete jukebox > Delete, folder: Unplayablefiles.2 Titel oder Name, Abteilung, Datum
29System settingsControlsCommunicationNavigationEntertainmentSystem settingsSetting the time/dateThe time can be set manually or via GPS*.Fig. 19 Setting the time zone►Select: MENU button > control buttonTime.Time source*manual: All time settings are adjusted man-ually.GPS : The time and date are set via GPS de-pending on the time zone (selected manual-ly). If you take your vehicle into a differenttime zone, the time zone will have to be ad-justed manually on the MMI.TimeThe Time can be set manually. The Timesource* must be set to manual.Time formatWhen this option is set to 24h, for example13:00 will be displayed as the time. When itis set to AM/PM, for example 1:00 PM will bedisplayed.Auto summer time*When the automatic summer time option ison, the time will be set one hour forward orback automatically when summer or wintertime starts.Manual summer timeIf this function is on, an hour is added to theTime set.Time zoneWhen selecting the correct time zone, a list ofcorresponding countries is displayed as an ex-ample.DateThe Date can be set manually. The Timesource must be set to manual.Date formatWhen this option is set to TT.MM, for example31.12. will be displayed as the date. When itis set to MM/TT, for example 12/31 will bedisplayed.Adjusting the soundYou can adjust the sound and volume of theMMI individually.Fig. 20 Sound settingsFig. 21 Adjusting balance/fader►Select: MENU button > Tone.1 SystemsThe volume of the Telephone* and Navigationfunctions*, the Speech dialogue system, theTraffic announcements and the Parking aid*can be adjusted individually ð page 30.2 Titel oder Name, Abteilung, Datum
30 System settings2 Subwoofer1) / 3 Bass / 4 TrebleYou can adjust the Subwoofer*, Bass and Tre-ble settings by turning the rotary pushbutton.New settings apply only to the currently acti-vated audio source, allowing the settings ofeach audio source to be adjusted individually.5 Balance/fader (sound focus)The settings depend on the equipment fittedin your vehicle:–To set the left/right volume ratio: Selectand confirm Balance. Turn the rotary push-button clockwise or anti-clockwise to the de-sired position.–To set the front/rear volume ratio: Selectand confirm Fader. Turn the rotary pushbut-ton clockwise or anti-clockwise to the de-sired position.–To set the volume ratio using MMI touch:Move your finger in the desired direction onthe MMI touch pad.–To set the sound focus*: Select and confirmFocus > all (evenly distributed sound focus)/front/rear (sound focus distributed evenly infront/rear interior of vehicle).6 GALA (speed-dependent volumecontrol)You can adjust the automatic volume adaptionto the interior noise level by turning the rotarypushbutton.Surround2)Turn the rotary pushbutton to adjust the vol-ume of the surround effect.Adjusting the systemvolume►Select: MENU button > Tone > Systems.Telephone*Ring tone: see ð page 38Ring tone volume/Volume of telephone call:The volume of the selected ring tone/the vol-ume of the telephone call can by adjusted byturning the rotary pushbutton.SystemsSpeech dialogue system volume*: Turn therotary pushbutton to adjust the volume of thespoken cues.MMI touch volume: Turn the rotary pushbut-ton to adjust the volume of the spoken cuesfor MMI touch.AnnouncementsTraffic programme: see ð page 55DAB announcements*: see ð page 55Traffic programme volume/Announcementvolume: You can adjust the volume of a trafficannouncement by turning the rotary pushbut-ton.Navigation*Voice guidance: see ð page 52Navigation cues during call: see ð page 52Volume of spoken cues/In-car entertainmentfader: Volume of navigation cues while routeguidance is active. The in-car entertainmentfader is an option that reduces the volume ofthe current audio source when the parking aidis active or a navigation cue is being played.Parking aid*Turn the rotary pushbutton to adjust the vol-ume of the beeps.1) Applies to vehicles with Bang & Olufsen Sound Systemand Audi Sound System (6-channel)2) Applies to vehicles with Bang & Olufsen sound system2 Titel oder Name, Abteilung, Datum
31System settingsControlsCommunicationNavigationEntertainmentRestarting the MMIsystem (Reset)Fig. 22 Combination of buttons for restart–Press and briefly hold the MENU button,the rotary pushbutton and the top right con-trol button ð Fig. 22 simultaneously andthen release the buttons again.Speed display ondriving school vehiclesApplies to vehicles: with equipment for driving schools►Select: MENU button > Car > control but-ton Car systems* > Driver assist > Drivingschool mode.When this function is on, the speed of the ve-hicle and the direction indicated by the turnsignals will appear on the MMI display.When the mode is switched (e.g. to radio),the vehicle speed and indicated direction willappear again on the display after five seconds.Note–The additional speed display is only avail-able for driving school vehicles.–The value indicated in the speedometeris the relevant speed.Other settings►Select: MENU button > control button Set-up MMI.LanguageThe language of texts shown on the MMI dis-play and the driver information system as wellas the language of the navigation cues* andspeech dialogue system* can be altered.The number of languages available dependson the market.Measurement unitsThe following measurement units can be setin the MMI display and the driver informationsystem:–Speed (km/h or mph)–Distance (km or miles)–Temperature (°C or °F)–Consumption (ltr/100 km, mpg (US), mpg(UK) or km/ltr)–Capacity (litres, gallons (UK) or gallons(US))Speech dialogue system*Command display: The display of possiblecommands during a speech dialogue can beswitched on/off.Short dialogue: This option can be switchedon/off; when it is activated, the spoken cuesplayed by the system are abbreviated.Volume settings: Turn the rotary pushbuttonto adjust the volume of the spoken cues.Individual speech training (only possiblewhen the vehicle is stationary): You can usethe individual speech training to adapt thespeech dialogue system to your voice or pro-nunciation so that the speech dialogue systemcan then better recognise what you are saying.The individual speech training prompts you torepeat 20 spoken phrases that consist of cer-tain commands and blocks of digits. If youwould like to delete the stored speech train-ing setup, you can use the function Resetspeech training.Display brightnessYou can adjust the brightness of the MMI dis-play by turning the rotary pushbutton.Factory settingsYou can reset the following functions to thefactory settings: 2 Titel oder Name, Abteilung, Datum
32 System settings–Sound settings–Radio–Media–Jukebox–Directory*–Telephone*–Bluetooth*–Navigation settings*–Navigation memory*–Speech dialogue system*You can select the desired options individuallyor mark Select all entries. Select and confirmRestore factory settings.System updateThe system update function can be used toupdate the MMI software via USB or an SDcard.For further information on the System up-date, please go online (e.g. www.audi.com/bluetooth) or ask an Audi dealer.Version informationThe software version of the MMI and the navi-gation database* are displayed. In addition,you can use the Software info function to dis-play information on the MMI's software and li-cence conditions.2 Titel oder Name, Abteilung, Datum
33TelephoneControlsCommunicationNavigationEntertainmentTelephoneIntroductionApplies to vehicles: with phone pre-installationAfter connecting your mobile phone to theMMI system via Bluetooth, you can operatethe telephone functions conveniently via theMMI.WARNING–According to health organisations, mo-bile phones may interfere with the func-tion of pacemakers. A minimum distanceof 20 cm should be kept between themobile phone aerial and the pacemaker.–Do not carry a mobile phone in yourbreast pocket directly over the pace-maker when the phone is switched on.–If you suspect interference, switch themobile phone off immediately.–The speech dialogue system ð page 17must not be used in cases of emergency,since the voice changes in stressful situa-tions. This could result in a failed or de-layed telephone connection. Always dialemergency numbers manually!–Switch off your mobile phones in allareas where there may be a risk of explo-sion. Remember that these areas maynot always be adequately marked. Suchplaces are filling stations, fuel and chem-ical storage facilities or transportvehicles and other places where fumes,chemicals (e.g. from leaking propane orfuel vapours in vehicles or buildings) orlarge quantities of dust particles (e.g.from flour, wood or metal) could accu-mulate in the air. This warning also ap-plies to all other places where you wouldnormally switch off your engine.–Today's driving conditions require the fullattention of drivers. Please see ð page 5,Notes on traffic safety.CAUTION–Please observe the laws regulating theuse of telephones in vehicles.–You must switch off the telephone inareas where the use of mobile tele-phones is prohibited. Please observe allrelevant caution notices and regulations.Note–The telephone functions will depend onthe mobile network service provider andthe mobile phone used. For further infor-mation, please contact your mobile net-work service provider, see the operatinginstructions for your mobile phone, or goonline (e.g. www.audi.com/bluetooth).–The maximum range of the Bluetoothconnection is limited to the interior ofthe vehicle. The connection can be sus-ceptible to interference with other elec-tronic devices.Bonding a mobilephoneApplies to vehicles: with phone pre-installationFig. 23 Searching for new mobile phonesFig. 24 Device managementRequirements for bonding–The vehicle must be stationary, and the igni-tion must be switched on. 2 Titel oder Name, Abteilung, Datum
34 Telephone–The Bluetooth function and the discoverabil-ity of the MMI system ð page 38 and themobile phone must be activated.–The on-board phone system and the mobilephone you would like to bond must not beconnected actively to any other Bluetoothdevice.Searching for a mobile phone–To find a new mobile phone: Select TELbutton > Connect mobile phone > Find newdevices. Or: Select TEL button > controlbutton Settings > Bluetooth > Device man-agement > Find new devices. The availableBluetooth devices are shown on the MMIdisplay.Bonding a mobile phone–To bond a mobile phone with PIN entry: Se-lect and confirm the mobile phone you wishto use. Select and confirm Handsfree. A PINcode for establishing the connection will ap-pear on the MMI display. Select and confirmYes. When the phone requests it, enter thePIN code shown into your mobile phone. Or:To enter any 4 to 16-digit PIN code, selectand confirm No when the PIN code is dis-played and enter your own personal PINcode on the MMI and then on the mobilephone.–Fast bonding (secure simple pairing): Ifyour mobile phone supports this function, a6-digit PIN code will be shown on your mo-bile phone and on the MMI display simulta-neously. Confirm this PIN code on your mo-bile phone and in the MMI.Please confirm any connection queries on yourmobile phone.After bonding: The signal strength bar 11ð page 10, Fig. 6 and Bluetooth symbol 10will appear in the status line of the MMI dis-play when the mobile phone has successfullybonded. In addition, the contacts on the mo-bile phone are automatically loaded into thedirectory of the MMI. This may take severalminutes, depending on how many contactsare stored on the mobile phone.If there is no memory capacity left for directo-ries and you bond another mobile phone, amessage will appear asking you to replace thecontacts from one of the phones. If you selectthe option Restricted use of telephone, onlythe contacts from the mobile phone or SIMcard and the local MMI memory (public) willbe available ð page 41.Note–You have about 30 seconds to enter thePIN code.–Bluetooth devices only have to be bon-ded once; any devices that have alreadybeen bonded to the MMI system onceare connected automatically when theyare within range and the ignition is on.–You can speed up the automatic connec-tion by authorising MMI bonding on yourmobile phone.–For further information, contact yourmobile network service provider or referto the operating instructions for yourmobile phone.–You can bond several mobile phones tothe MMI system; however only one con-nection is active at a time.–Any Bluetooth device that is already con-nected to the MMI system is disconnec-ted when another device is bonded tothe system.–The Bluetooth connection between thesystem and the mobile phone is auto-matically terminated when you leave thecar.–For further information on using a phonein your car, please go online (e.g.www.audi.com/bluetooth) or ask an Audidealer.2 Titel oder Name, Abteilung, Datum
35TelephoneControlsCommunicationNavigationEntertainmentCalling up thetelephoneApplies to vehicles: with phone pre-installationFig. 25 Telephone functionsImportant: A mobile phone must be connec-ted to the MMI system ð page 33.►Select: TEL button.The MMI display will show the telephonemenu that was last activated. You can call upthe telephone functions by pressing the TELbutton again while the Telephone menu isopen.The following telephone functions are availa-ble ð Fig. 25:Call list ð page 35Directory ð page 41Favourites ð page 38Enter number ð page 36NoteThe telephone functions will depend onthe mobile network service provider andthe mobile phone used. For further infor-mation, contact your mobile network serv-ice provider or refer to the operating in-structions for your mobile phone.Dialling a telephonenumberFrom the directoryApplies to vehicles: with phone pre-installationYou can dial a telephone number directly fromthe directory ð page 41.1234From a listApplies to vehicles: with phone pre-installationFig. 26 Selecting a telephone number from the calllistImportant: A telephone number must be stor-ed in the call list, the favourites or in the di-rectory.►Select: TEL button.Call list–To dial a telephone number: Select and con-firm the desired telephone number in thecall list. Select and confirm Call.Symbols in the call list ð Fig. 26:Numbers dialledMissed callsReceived callsDirectory–To dial a telephone number: Select and con-firm the desired contact in the directory. Theaddress card will appear on the MMI display.Select and confirm the desired telephonenumber.Favourites–To dial a telephone number: Select and con-firm a favourite. Select and confirm Call.NoteYou can also call up the call list by pressingthe control button for Dial in the Tele-phone menu.1232 Titel oder Name, Abteilung, Datum
36 TelephoneVia the spellerApplies to vehicles: with phone pre-installationFig. 27 Entering a telephone number via the spellerfor numbersFig. 28 Entering a telephone number via the spellerfor letters►Select: TEL button > Enter number.–To enter a telephone number using num-bers: Enter a telephone number using thespeller for numbers ð Fig. 27.–To enter a telephone number using letters:Press the control button for A-Z. Enter a ser-ies of letters, e.g. AUDISERVICE using thespeller for letters.–To dial a telephone number: Select and con-firm OK. Or: Press the control button for Di-al. The current audio source is muted whilethe connection is established.If you have entered incorrect digits, select andconfirm . You can delete all characters en-tered at once by turning the speller to  andpressing and holding the rotary pushbutton.NoteYou can enter DTMF tones ("touch-tones")using the speller while you are talking onthe phone.Listening to voice mail messagesApplies to vehicles: with phone pre-installation►Select: TEL button > control button Mail-box.–To enter the mailbox number: Select andconfirm List and select and confirm the de-sired number. Or: Enter the mailbox numberusing the speller. Select and confirm OK.–To dial the mailbox number: Press the con-trol button for Mailbox.Note–This service must be set up and activatedon your mobile network before you canuse it. For more information, contactyour service provider.–The mailbox number depends on yourservice provider.Answering/ignoringtelephone callsApplies to vehicles: with phone pre-installationFig. 29 Incoming callImportant: There must be an incoming call,an active call, or the phone must be establish-ing a connection.–To answer a call: Press the control buttonfor Answer.–To ignore a call: Press the control button forIgnore.–To end a call/cancel the dialling process:Press the control button for End call.To answer a further call: If you are alreadytalking on the phone when someone elsecalls, select Answer to place the current call 2 Titel oder Name, Abteilung, Datum
37TelephoneControlsCommunicationNavigationEntertainmenton hold and to answer the incoming call. Ifyou select Ignore, the incoming call will bedeclined.Caller information: Depending on whetherthe caller is stored in the directory and wheth-er the telephone number is transmitted withthe call, the name, the telephone number orUnknown will appear on the MMI display andon the driver information system.Note–Depending on your mobile phone andservice provider, you may be able to an-swer incoming calls while you are alreadytalking on the phone ð page 37. Theactive telephone call will then be placedon hold automatically.–The audio source is muted automaticallywhen you make or receive telephonecalls.–If the MMI display was switched off, itwill be switched on automatically whenthere is an incoming call.During a telephone callApplies to vehicles: with phone pre-installationImportant: You must be talking on the phone.►Select: Control button Options.–To make a further call: Select Further call >Directory or Call list > entry in list.–To answer a further call when you are talk-ing on the phone and have another call onhold: Select Replace. The current call will bereplaced by the incoming call.Other functions are:Switch microphone off: If you select and con-firm this option, the caller will no longer beable to hear you; you will still be able to hearthe caller.Hold/Resume: You can put a call on hold andretrieve it later from the hold queue. On holdappears on the MMI display, together with theamount of time the call has been on hold.Switch: You can switch between two phonecalls (one of them will be on hold at any giventime). Select End call to end whichever call isactive. The call on hold will remain in the holdqueue and can be continued by pressing thecontrol button for Options and selecting Re-sume.Conference: Up to five callers and one calleron hold can take part in a conference (depend-ing on the network service). To set up a fur-ther call, select Hold to place all the membersof an existing conference on hold. Press theOptions control button. Select and confirmFurther call and choose a telephone numberfrom the Call list or the Directory. Alterna-tively, select Enter number. To add this callerto the existing conference, select Conference.Select Resume if you want to retrieve all par-ticipants in an existing conference from thehold queue. Show conference participants al-lows you to display the participants.Note–The option Call waiting must be activa-ted on your mobile phone for you to bemade aware of incoming calls during aconversation.–The options available during a call mayvary depending on the mobile networkservice provider and the mobile phoneyou are using. For more information,contact your service provider.–The display for the incoming call may re-main for several seconds afterwards; thisdepends on the type of mobile phoneyou are using. Should you use the func-tion Replace or Ignore in the MMI sys-tem during this time, it is possible thatthe active call will be ended.Storing a telephonenumberStoring a new telephone numberApplies to vehicles: with phone pre-installationYou can store a new telephone number as acontact in the directory ð page 41.2 Titel oder Name, Abteilung, Datum
38 TelephoneStoring from the call listApplies to vehicles: with phone pre-installationYou can store telephone numbers from thecall list in the directory.Fig. 30 Storing a telephone number in the directoryImportant: A telephone number must be stor-ed in the call list.►Select: TEL button > Call list > Phone num-ber > Store in directory.–To store a telephone number as a new ad-dress card: Select and confirm New contact.Enter a Surname. Enter additional data ifdesired. Select and confirm Store contact.–To assign a telephone number to an exist-ing address card: Select and confirm a con-tact in the list. Select and confirm Storecontact.Note–The contacts are only stored in the MMIdirectory.–You can edit the directory ð page 41.Storing in the favouritesApplies to vehicles: with phone pre-installationIn addition to the mailbox number, you canstore up to nine contacts in the list of favour-ites.►Select: TEL button > Favourites.–To store a new telephone number as a fa-vourite: Select and confirm Create favourite> New contact. Enter a Surname and furtherdata if required. Enter a Phone number. Se-lect and confirm Store contact.–To store an existing telephone number as afavourite: Select and confirm Create favour-ite > a contact in the list. If applicable, se-lect and confirm the desired telephonenumber.–To delete a stored favourite: Select and con-firm the favourite > Delete.Other settingsApplies to vehicles: with phone pre-installation►Select: TEL button > control button Set-tings.Telephone settingsRing tone settings1): Ring tones are playedwhen you select the function Ring tone. Pressthe rotary pushbutton to store the selectedring tone. For the settings Ring tone volume/Volume of telephone call see ð page 30.Mailbox number: You can enter or edit themailbox number using the speller via the en-try field Number. The mailbox number can bedeleted with the option Delete mailbox num-ber.BluetoothDevice management: All Bluetooth devicesbonded to the MMI system are displayed in alist. The device that is currently connected ismarked with a Bluetooth symbol. To switchbetween the Handsfree profile and the Audioplayer profile while a mobile phone is connec-ted, select the Bluetooth device and changethe profile via the function connect (the vehi-cle must be stationary). Use the function dis-connect to disconnect the active profile. Todelete bonded Bluetooth devices one at atime, select a device and delete it by selectingthe function Delete Bluetooth device. TheFind new devices function searches for allBluetooth devices within range and displaysthem in a list. 1) Depends on the connected mobile phone2 Titel oder Name, Abteilung, Datum
39TelephoneControlsCommunicationNavigationEntertainmentBluetooth: When this function is on, the Blue-tooth symbol 5 ð page 10, Fig. 6 will appearon the MMI display. The Bluetooth discovera-bility of the MMI can be switched on/off usingthe settings visible/invisible. Devices whichhave already been bonded can connect viaBluetooth even when discoverability is deacti-vated. Once you have bonded your mobilephone, you should switch Bluetooth to invisi-ble to prevent the on-board phone systemfrom being discovered by third parties. Youcan switch off the Bluetooth function. It willthen not be possible to establish a Bluetoothconnection.Audio player: In order to be able to use theBluetooth audio player as a source in the Me-dia menu ð page 58, the function must beswitched on. To avoid problems in Telephoneor Media mode, switch the Audio player func-tion off when you are not using the Bluetoothaudio player.MMI name: The Bluetooth name of the MMIsystem (e.g. "AUDI MMI 2613") is displayedand can be changed.Note–You can bond several mobile phones tothe MMI system; however only one con-nection is active at a time.–All bonded Bluetooth devices can be de-leted by resetting the Bluetooth func-tion to the factory settings ð page 31.–When you play audio files via the Blue-tooth audio player, the Bluetooth discov-erability is automatically switched to in-visible.Audi Phone BoxApplies to vehicles: with phone pre-installation and AudiPhone BoxThe Audi Phone Box is located in the centreconsole beneath the centre armrest.Fig. 31 Audi Phone BoxFig. 32 Available charging adapters–To establish a connection: Place your mo-bile phone into the Audi Phone Box with thedisplay facing upwards. A mobile phone thathas already been bonded ð page 33 will au-tomatically be connected to the MMI.–To charge the battery: Connect your mobilephone to the 5 Volt socket A ð Fig. 31 us-ing the USB charging adapter* ð Fig. 32.The following USB charging adapters are cur-rently available:Apple Dock Connector®Sony-Ericsson Fast Port®Mini USB (angled)Mini USB (straight)2 mm Nokia® adapterA mobile phone in the Audi Phone Box sendsand receives call signals and data via the ex-ternal car aerial. An additional aerial amplifierensures good transmission quality. 123452 Titel oder Name, Abteilung, Datum
40 TelephoneWARNINGLoose objects can be flung around in thepassenger compartment in the event ofsudden driving or braking manoeuvres.This could result in serious injuries and al-so cause you to lose control of the vehicle.Always keep the centre armrest closedwhen driving.Note–The Audi Phone Box is not available in allcountries. Your Audi dealer will be ableto provide you with more detailed infor-mation.–To avoid malfunctions, ensure that themobile phone is correctly placed insidethe Audi Phone Box. The mobile phoneshould ideally be placed centrally on thetelephone symbol.–If the mobile phone is placed in the AudiPhone Box in a bag or a protective case,this may interfere with the connection tothe external aerial.–A Bluetooth connection between yourmobile phone and the on-board phonesystem is also necessary when you areusing the Audi Phone Box.–USB charging adapters are availablefrom Audi dealers or specialist retailers.2 Titel oder Name, Abteilung, Datum
41DirectoryControlsCommunicationNavigationEntertainmentDirectoryCalling up the directoryApplies to vehicles: with phone pre-installationAfter a mobile phone has been bonded suc-cessfully, the contacts from the mobile phoneare automatically imported into the directoryof the MMI system.Fig. 33 List of contacts►Select: TEL button > Directory.–To select a contact: Select and confirm acontact in the directory. The address cardwill be displayed.The contacts are displayed in alphabetical or-der; they can be sorted according to firstname/surname ð page 44 and are displayedtogether with a symbol indicating where theyare stored ð Fig. 33:Public MMI directory: These contacts canbe seen and used by any user, irrespectiveof which mobile phone is connected.Private MMI directory: These contacts areonly visible if the corresponding mobilephone is connected.SIM cardMobile phoneYou can bond up to four different mobilephones to the MMI system, allowing you tomanage up to four private directories in addi-tion to the public directory.If there is no memory capacity left for directo-ries and you bond another mobile phone, amessage will appear asking you to replace thecontacts from one of the phones. If you selectthe option Restricted use of telephone, only1234the contacts from the mobile phone or SIMcard and the local MMI memory (public) willbe available.You can open the directory via the Telephone*menu and via the Navigation* menu.Note–Please pay attention to any synchronisa-tion queries on your mobile phone. Youmust confirm any synchronisation quer-ies from the directory before the con-tacts can be loaded from your mobilephone into the MMI directory.–Which contacts are displayed on theMMI depends on the mobile phone youare using. For more information onwhich mobile phones are supported,please go online (e.g. www.audi.com/bluetooth) or contact an Audi dealer.–In certain cases, contacts from a mobilephone may not be transmitted in alpha-betical order. If there are too many en-tries, contacts with certain initial lettersmay not be displayed on the MMI sys-tem.–The contacts in the local MMI memory(public) are visible anytime and aretherefore not protected against accessby other users.Storing a contactApplies to vehicles: with phone pre-installationFig. 34 Creating new contact►Select: TEL button > Directory > New con-tact.2 Titel oder Name, Abteilung, Datum
42 DirectorySurname/First nameEnter the surname and first name using thespeller.Phone numbersYou can store up to five telephone numbersfor each address card. In addition, you can as-sign a type (business or private) and a cate-gory (land line, mobile or fax) to each tele-phone number. You can also select a tele-phone number that you use frequently as pre-ferred number. This number is then displayedfirst when the address card is opened.You can import a telephone number from theCall list into an address card by selecting theoption New number and then pressing thecontrol button for List.Business addresses/Private addressesYou can store a business address and a privateaddress in an address card. To delete the busi-ness or private address, select the functionDelete postal address.The function Create navigation destinationcan be used to create a Navigation destina-tion* from the selected address. The inputmenu will appear on the MMI display so thatyou can add any necessary address details.Structured addresses from a mobile phonethat include details of the country, post code,town and street are imported into the directo-ry directly.Note–The contacts in the local MMI memory(public) are visible anytime and aretherefore not protected against accessby other users.–The new contact you have created is stor-ed in the local memory (private) of thedirectory you are currently using.–Whether addresses can be imported de-pends on your mobile phone.–You can store up to 500 contacts in thelocal memory of each public or privatedirectory.–Contacts that have been edited in theMMI directory cannot be updated auto-matically on the connected mobilephone. We recommend that you editcontacts on a mobile phone directly onthe mobile phone.Using a contactFindingApplies to vehicles: with phone pre-installation►Select: TEL button > Directory.–Select and confirm Find contact. Enter thename using the speller. Or: Select and con-firm the contact via List.The system searches for both the first nameand surname within a name.NoteYou can scroll rapidly through long lists byturning the rotary pushbutton quickly.CallingApplies to vehicles: with phone pre-installationFig. 35 Calling a contact►Select: TEL button > Directory.–Select and confirm the desired contact inthe directory. Select and confirm the desiredtelephone number. Or: Select the telephonenumber you would like to call and press thecontrol button for Call.2 Titel oder Name, Abteilung, Datum
43DirectoryControlsCommunicationNavigationEntertainmentNavigatingApplies to vehicles: with phone pre-installation and navi-gation systemFig. 36 Selecting a destination►Select: TEL button > Directory.–Select and confirm the desired contact inthe directory. Select and confirm the desireddestination. Or: Select the destination youwould like to navigate to and press the con-trol button for Navigate to. To start navigat-ing, select and confirm Start route guid-ance.Editing/deleting acontactApplies to vehicles: with phone pre-installationYou can edit/delete contacts in the local MMImemory (private/public) any time.►Select: TEL button > Directory > contactfrom directory.Visible to allYou can mark a contact so it is Visible to all. The contact will then be stored in the localMMI memory (public) and can be accessed byall directory users.Read contactThe MMI system automatically creates a nametag for each contact in the directory, whichyou can have the system read to you.Copy contactTo edit a contact, select and confirm Copycontact. A copy of the contact will be stored inthe local MMI memory (private).You can now change the details in the entryfields using the speller ð page 41.Delete contactYou can delete only the contacts in the localMMI memory (private/public).NoteContacts that have been edited in the MMIdirectory cannot be updated automaticallyon the connected mobile phone. We rec-ommend that you edit contacts on a mo-bile phone directly on the mobile phone.Importing/exportingcontactsApplies to vehicles: with phone pre-installationYou can import or export contacts in thevCard format (.vcf) into or from the directory.Important: An SD card must be inserted in theSD card reader ð page 24, or a USB mass stor-age device must be connected to the Audi mu-sic interface ð page 25.►Select: TEL button > Directory > controlbutton Settings.–To import contacts from a storage device:Select and confirm Import contacts > SDcard or USB storage device > desired con-tacts > Import.–To export contacts to a storage device: Se-lect and confirm Export contacts > SD cardor USB storage device > desired contacts >Export.–To select all contacts at once for import/ex-port: Select and confirm Import contacts/Export contacts > SD card or USB storagedevice > control button All > Import/Ex-port.Note–The imported contacts are stored in thelocal memory of the directory you are us-ing.–You can import up to 500 contacts. Youcan call up the memory capacity of thedirectory any time ð page 44.2 Titel oder Name, Abteilung, Datum
44 Directory–Never store important data on SD cardsor USB mass storage devices. Audi shallnot accept any liability whatsoever forthe loss of data or media.Other settingsApplies to vehicles: with phone pre-installation►Select: TEL button > Directory > controlbutton Settings.Memory capacityThe Memory capacity of the directory will bedisplayed.You can manage up to 10500 contacts withthe directory. Up to 2000 contacts can be loa-ded from your mobile phone into each privatedirectory. Additionally, you can create up to500 contacts in the local MMI memory (pri-vate), as well as 500 in the local MMI memory(public).Sort orderYou can sort the contacts in your directory al-phabetically according to the surname or firstname.Public contactsYou can choose to activate or deactivate thedisplay of public contacts. Select yes to showall contacts in the local MMI memory (public);if you select no they are hidden if a mobilephone is connected to the MMI.Download phone bookTo update the contacts in the MMI, you candownload the contacts from your mobilephone manually. Depending on the mobilephone you are using, the Bluetooth connec-tion may have to be disconnected and re-es-tablished before you can update the contacts.Delete contactsYou can delete all contacts in the local memo-ry at once by selecting the option Delete allcontacts. Select Delete private contacts todelete all contacts stored in the local memory(private). The contacts in the local memory(public) can be deleted by selecting Deletepublic contacts.2 Titel oder Name, Abteilung, Datum
45NavigationControlsCommunicationNavigationEntertainmentNavigationCalling up thenavigation menuApplies to vehicles: with navigation systemThe navigation system guides you directly toyour destination, avoiding traffic obstruc-tions and using alternative routes if desired.►Select: NAV button.After calling up the navigation, the menu thatwas last open will be displayed.–To switch between the map and the desti-nation entry screen: Press the NAV buttonagain.WARNING–Today's driving conditions require the fullattention of drivers. Please see ð page 5,Notes on traffic safety.–Pay attention to traffic rules when driv-ing.–The route calculated by the navigationsystem is a recommendation of how bestto reach a destination. Pay attention totraffic lights, no stopping signs, lanechange restrictions, one-way streets, etc.CAUTION–Should the navigation directions contra-dict the current traffic regulations, youmust always follow the traffic regula-tions.–The volume should only be set at a levelwhich enables you to hear distant policeand emergency vehicles clearly - failureto do so could result in an accident.Note–Snow or other obstructions on the GPSaerial or interference caused by trees orlarge buildings could affect the receptionof the satellite signals and make posi-tioning difficult. GPS reception and vehi-cle positioning can also be adversely af-fected by deactivation or a malfunctionof several satellites.–Street and town names can change;therefore the names stored on the MMIcan in exceptional cases be differentfrom the actual names.–For information on updating the naviga-tion data, please contact your Audi deal-er.Entering a destinationEntering an addressApplies to vehicles: with navigation systemFig. 37 Enter destination►Select: NAV button > control button Dest.> Address.–To change the country: Select and confirmCountry and enter a country.–To enter a destination via the town/postcode: Select and confirm Town/post code.Enter a town or a post code. Now you can se-lect the town from the list and confirm it.Select and confirm additional details for thedestination such as the Street, House num-ber, Special destination in town or Centre.Start the route guidance function.–To enter a destination via the street: Selectand confirm Street. Select a town from thelist and confirm it. Enter a street. Select andconfirm additional details for the destina-tion such as the House number or an Inter-section. Start the route guidance function.Help entering an address: While you are en-tering an address, suggestions based on yourprevious entries are made in the entry field forthe town. You can set the suggested town asthe destination by pressing the control buttonfor List. Further towns matching your entry 2 Titel oder Name, Abteilung, Datum
46 Navigationare listed below the entry field (large townsfirst and then other towns in alphabetical or-der). In addition, the total number of townsfound is displayed 1 ð Fig. 37.Setting a destination from the mapApplies to vehicles: with navigation systemA point on the map can be set as the destina-tion or stored in the directory.Fig. 38 Setting a destination from the mapFig. 39 Setting map position as destination–To call up the map: Press the NAV buttonrepeatedly until the map appears.–To set a convenient map scale (in order tobe able to move the crosshairs faster): Turnthe rotary pushbutton clockwise/anti-clock-wise.–To move the crosshairs: Press the rotarypushbutton. Move the crosshairs onto thedestination using MMI touch ð page 8.–To use the destination for route guidance:Press the BACK button. Select symbol 1 inthe legend menu. Select and confirm Startroute guidance.Additional information on the point selectedwith the crosshairs: If you use the crosshairsto select a location on the map, any existinginformation on this location (e.g. address ortraffic information) will be displayed 2.Stacked map content: If several special desti-nations are located close to each other, theirsymbols are stacked on the map 3.Entering a special destinationApplies to vehicles: with navigation systemFig. 40 Entering a special destination►Select: NAV button > control button Desti-nation > Special destinations.–To change the search area: Select Searcharea. Now you can select a search area fromthe list and confirm it.–To find the name of a special destination inthe selected search area: Select Find entry.Enter the name of the special destination.–To find a special destination in a certaincategory: Select Select category. Select andconfirm a category, for example Airport.–To find a special destination in the selectedsearch area: Select and confirm a categorydirectly (fast access 1 ð Fig. 40). You cannow select and confirm a special destina-tion.The following search categories are available:In immediate vicinity: You can select specialdestinations from different categories. Thespecial destinations are displayed in a list,starting with destinations in the immediatevicinity and going up to destinations within aradius of 200 km.In vicinity of route: Special destinationsalong the route can only be selected when theroute guidance function is active. The special 2 Titel oder Name, Abteilung, Datum
47NavigationControlsCommunicationNavigationEntertainmentdestination is located directly on or in the im-mediate vicinity of your route.In vicinity of destination: You can select spe-cial destinations from different categories; forexample, you can look for a hotel at the desti-nation.In new town: Enter the name of the town inthe speller. You can select special destinationsfrom different categories. This function can beused to find special destinations in a town ir-respective of the destination.Nationwide: You can either find the specialdestination by entering the name or by select-ing it from different categories. A special des-tination can be found irrespective of your cur-rent position and your destination. You canuse this function, for example, to navigate toan airport in the country currently selected.In new country: Enter the name of the coun-try in the speller. A special destination can befound irrespective of your current position anddestination. You can use this function to findspecial destinations that you already know ina new country.Note–The distances to special destinations areshown as the crow flies from your cur-rent location (arrow not filled in). The ac-tual driving distance between your cur-rent position and the special destinationis updated automatically (filled in ar-row).–Sometimes there are destination entriesin the list that cannot be displayed com-pletely because they are too long. If youselect one of these entries with the rota-ry pushbutton, detailed information onthe selected entry will be displayed auto-matically after a few seconds.Setting a favourite/home address as thedestinationApplies to vehicles: with navigation systemUsing the favourites makes it easier to enterdestinations that you use often.Important: A favourite or home address mustbe stored ð page 50.►Select: NAV button > control button Desti-nation > Favourites.►Select and confirm a favourite/your homeaddress. Start the route guidance function.Loading the last destinationApplies to vehicles: with navigation systemThe last destinations are stored automatical-ly and can be loaded again directly as a newdestination.►Select: NAV button > control button Desti-nation > Last destinations.►Select a last destination from the list andconfirm it. Start the route guidance func-tion.NoteYou can delete the list of last destinationsð page 52.Setting a destination from the directoryApplies to vehicles: with navigation systemYou can navigate directly to entries in the di-rectory.Important: The directory must contain con-tacts with private/business addresses storedas destinations ð page 41.►Select: NAV button > control button Desti-nation > Directory.►Select and confirm a private/business ad-dress and start route guidance.2 Titel oder Name, Abteilung, Datum
48 NavigationEntering a destination via thecoordinatesApplies to vehicles: with navigation system►Select: NAV button > control button Desti-nation > Address > Coordinates.►Select and confirm the Latitude and Longi-tude coordinates. Start the route guidancefunction.Entering a stopover/tour planApplies to vehicles: with navigation systemYou can enter up to nine stopovers directly inthe tour plan or using the various ways of en-tering destinations.Fig. 41 Tour planImportant: You must have entered a destina-tion ð page 45.►Select: NAV button > control button Tour.–To enter a destination as a stopover: Selectand confirm the symbol for entering a stop-over 2 ð Fig. 41. Enter a destinationð page 45. Select and confirm Set as stop-over in the Destination details menu.–To change a tour plan: Press the controlbutton for Tour. Select and confirm the des-tination/stopover and then select Change,Move, Delete or Start tour plan from here.–To store a tour plan: Press the control but-ton for Tour. Select and confirm Tour mem-ory and then Store tour plan. Enter a name.–To load/delete a tour plan: Press the controlbutton for Tour. Select and confirm Tourmemory and then Load tour plan/Deletetour plan.The following information is displayed in thelegend menu of the tour plan ð Fig. 41:Location of the vehicleSymbol for entering a stopoverStopover enteredDestinationStarting/stoppingroute guidanceApplies to vehicles: with navigation system–To enter a new destination and start routeguidance: Select NAV button > control but-ton Destination > enter destination > Startroute guidance.–To restart/stop the last route guidance: Se-lect NAV button > control button Destina-tion > Start/Cancel.When you enter a new destination, the follow-ing additional functions are available in theDestination details menu ð page 46, Fig. 39:Calculate alternative routes: Three suggestedroutes are calculated for the destination cur-rently entered. The legend menu will show in-formation on the alternative route, such asthe distance to the destination and the calcu-lated arrival time.Enter special destination in town: With thisoption you can look for e.g. tourist attractionsor public buildings (hospital, cinema, recrea-tion areas, etc.) in the vicinity of the town en-tered. The special destination can be set di-rectly as the destination.Select centre: The navigation system calcu-lates a route leading to the centre of the se-lected town/district.Destination on map: The destination is shownon the map.12342 Titel oder Name, Abteilung, Datum
49NavigationControlsCommunicationNavigationEntertainmentHow to use the mapApplies to vehicles: with navigation systemFig. 42 Map with crosshairs switched offFig. 43 Map with crosshairs switched on–To call up the map: Press the NAV buttonrepeatedly until the map appears.–To switch on the crosshairs: Press the rotarypushbutton while the map is being dis-played.–To switch off the crosshairs: Press theBACK button.Crosshairs switched off:Orientation: The map is displayed eitherfrom the north position or from the driv-ing position.Scale: Turn the rotary pushbutton clock-wise/anti-clockwise to zoom in or out.Distance to destination/stopoverCalculated time of arrival at destination/stopoverSpeed display1)Altitude displayLocation of the vehicle1234567Display of upcoming turn-offAdditional information ð page 52Crosshairs switched on:Additional information on the point selec-ted with the crosshairs: If you use thecrosshairs to select a point on the map,any existing information on this location,e.g. the address, will be displayed.Display of position coordinates of thecrosshairs (longitude/latitude)Moving along the route: This function canbe used while route guidance is activated.Turn the rotary pushbutton clockwise/an-ti-clockwise to move the map along thecurrent route.Destination details menu: If available, de-tails on the point selected with the cross-hairs are displayed (e.g. address). Thepoint on the map selected with the cross-hairs can be set as a destination or stop-over, stored in the directory and called upon the telephone.Calculating alternative routesð page 53Map contents such as traffic information,favourite destinations or restaurants891011121314151) Applies to vehicles without camera-based speed limitdisplay only.2 Titel oder Name, Abteilung, Datum
50 NavigationCalling up trafficinformationApplies to vehicles: with navigation systemWhen the traffic avoidance function is activa-ted, the MMI system uses the traffic informa-tion to guide you around traffic obstructionswhenever possible.Fig. 44 Calling up traffic informationFig. 45 Displaying traffic information on the mapImportant: The traffic avoidance functionmust be switched on ð page 51.►Select: NAV button > control button Traf-fic.–To call up the detail view for traffic infor-mation: Select a piece of traffic informationfrom the list and confirm it.–To call up the next piece of traffic informa-tion: Press the rotary pushbutton.–To call up traffic information on the map:Select and confirm Show on map.–To display the next piece of traffic informa-tion on the map: Press the rotary pushbut-ton.1 Traffic information on your routeAn immediately upcoming traffic obstructioncomes up in the first position and is displayedwith a red warning symbol. Any other trafficobstructions which are relevant for your routeare sorted by distance to your current loca-tion. Traffic obstructions that you have avoi-ded on your route are marked with the sym-bol .2 Other traffic informationTraffic obstructions that are not relevant foryour route are shown with a greyed-out warn-ing symbol. They are sorted according to roadcategory (motorways, major roads, otherroads), country and road number.NoteUrgent traffic information, such as a cartravelling in the wrong direction on themotorway, is displayed automatically. Tohide the traffic information, simply pressthe BACK button or the rotary pushbut-ton.Other settingsStoring a favourite/home addressApplies to vehicles: with navigation systemThe favourites you store are automaticallydisplayed as a contact in the directory.►Select: NAV button > control button Desti-nation > Favourites.–To store a favourite: Select Create favour-ite. Select and confirm a favourite with thefunctions displayed.–To store your home address: Select Homeaddress. Select and confirm the home ad-dress with the functions displayed.Other functions are:–Call: Select and confirm a favourite/yourhome address. Select and confirm Call.–Change: Select and confirm a favourite/yourhome address. Select and confirm Assignnew favourite/Reassign home address.–Show on map: Select and confirm a favour-ite/your home address. Select and confirmDestination on map.2 Titel oder Name, Abteilung, Datum
51NavigationControlsCommunicationNavigationEntertainment–Delete: Select and confirm a favourite/yourhome address. Select and confirm Delete fa-vourite/home address.Storing a destination in the directoryApplies to vehicles: with navigation systemTwo addresses (private/business) can be stor-ed as a destination for each contact in the di-rectory.►Select: NAV button > control button Desti-nation > enter destination > Store in direc-tory.–To store a destination as a new addresscard: Select New contact. Enter a name. En-ter additional data if desired. Select andconfirm Store contact.–To assign a destination to an existing ad-dress card: Select and confirm an addresscard. Select and confirm Store contact. If adestination is already stored in an existingaddress card, the old destination will beoverwritten automatically.Show as favourite: If you would like to beable to access the destination quickly, you canadd it to the list of favourites when this func-tion is switched on  ð page 47.General settingsApplies to vehicles: with navigation system►Select: NAV button > control button Set-tings.Route criteriaDyn. traffic avoidance: When the dynamictraffic avoidance function is on, the route isautomatically optimised using the currenttraffic information. If the MMI system doesnot display a detour route although the dy-namic traffic avoidance function is on and atraffic jam has been reported on the plannedroute, this is because the estimated time re-quired for the detour is longer than the esti-mated time required for remaining on theroute with the traffic jam.Route type: You can select a short, fast oreconomical (eco) route.Motorway/Vignette/Toll road/Tunnel/Ferry/Motorail: If you do not want the navigationsystem to include motorways, vignette/tollroads, tunnels, ferries or motorail transitroutes in the route calculation, you can set theoption avoid.Closed certain times: Select avoid to excluderoads that are closed at certain times of theday (e.g. pedestrian zones) from the route cal-culation. When auto is selected, the MMI sys-tem will determine whether the restrictedroad can be included in the route calculationbased on the entries stored in the navigationdata.Seasonally restricted: Select avoid to excluderoads that are closed during certain seasons(e.g. mountain passes) from the route calcula-tion. When auto is selected, the MMI systemwill determine whether the seasonally restric-ted road can be included in the route calcula-tion based on the entries stored in the naviga-tion data.Map coloursday/night: The map is displayed with a light/dark background colour.auto: When the lights are on, the mapscheme will switch from day to night.Map typedestination: The map indicates the destina-tion and is set to face north.2D driv. pos./2D north pos.: The map depictsthe vehicle's current location and is set to facethe direction of travel or north.3D driv. pos.: When this function is activated,the current vehicle position is displayed in athree-dimensional map, and the map is set toface the direction of travel. If the map scale ismore than 100 km, the map is set to facenorth.overview: The entire route from the vehicleposition to the final destination is displayed 2 Titel oder Name, Abteilung, Datum
52 Navigationon the map. The map scale varies according tothe length of the route. The map is set to facenorth.Map contentThe display of map contents such as traffic in-formation, favourite destinations or restau-rants can be switched on  and off.Additional infoImportant: The route guidance function musthave been started ð page 48.Route info: During route guidance, the nextthree manoeuvres together with the calcula-ted distances and arrival times are displayed9 ð page 49, Fig. 42. In addition, the streetyou are currently on, upcoming turn-offs, traf-fic information or special destinations on thecurrent route are displayed. The next upcom-ing turn-off is shown in the bottom line.Overview map: The entire route from the ve-hicle position to the final destination is dis-played in the additional info.off: No additional info is shown.Intersection mapWhen this option is on, a detail view of the in-tersection is displayed temporarily in the ad-ditional info when there is an upcoming turn-off.Auto zoomon: The map scale is selected automaticallyaccording to the category of the road you areon (motorway, major road, other road). Whenthere is an upcoming turn-off, the map displaywill automatically zoom in for a better view ofthe details. This will be indicated in the map'slegend menu 2 ð page 49, Fig. 42.Intersection: When route guidance is activeand there are upcoming turn-offs, the mapdisplay will temporarily switch to a more de-tailed scale so that the road layout can beidentified more easily.off: The map scale you have set will remainunaltered.Petrol station msgWhen the fuel gauge is below the reservezone, a message will appear when this func-tion is on. Confirm this message, and a list ofpetrol stations in the vicinity will be displayed.When you select one of the petrol stations,the route to this station will be calculatedbased on the current position of your car.Speed displayYou can switch the display of the maximumspeed limit on motorways, dual carriagewaysand other major roads on and off if it is storedin the navigation data.Voice guidanceVoice guidance: The navigation cues can beplayed in complete or compact form. You canuse the traffic option to have the system playonly those announcements on traffic obstruc-tions that are relevant for your route. Selectoff if you do not want the system to play anynavigation cues.Navigation cues during call: You can switchthe navigation cues while you are on thephone on  or off.Delete favouritesYou can delete stored favourites individuallyor all at once.Delete last destinationsThe destinations that were last entered arestored automatically. You can delete them in-dividually or all at once.Presentation modeUse the Presentation mode to plan and dis-play a route effectively by displaying map con-tents or route criteria. You can enter yourstart location manually (Set start location) if,for example, you would like to calculate aroute starting from a different position thanthe current position of the vehicle. Start thePresentation mode to simulate a route guid-ance.2 Titel oder Name, Abteilung, Datum
53NavigationControlsCommunicationNavigationEntertainmentTour settingsApplies to vehicles: with navigation system►Select: NAV button > control button Tour.Calculate alternative routesUp to three suggested routes and their char-acteristics are displayed in the map's legendmenu.The route which was calculated on the basis ofyour criteria is highlighted. In addition thedistance to the destination and the estimatedtime of arrival will be displayed. You can usethe rotary pushbutton to select the possiblealternative routes.You can use the Via function to determine thecourse of the alternative route yourself.Route listThe route list is only visible when the routeguidance function is active; it contains infor-mation on the route, street names and thelength of the route sections.Exclude routeWhen route guidance is activated, a section ofthe calculated route that you have set will beavoided if possible. The navigation system willcalculate an alternative route.The blocking of the route that you have en-tered applies only to the current route guid-ance; if required, the route section to be avoi-ded must be re-entered.If you exclude a route section, this section willbe hatched in red and white on the map.Information on countryWith this option you can view the speed limitsfor towns and country roads in the countryyou have selected. This information is dis-played automatically when you cross a border.2 Titel oder Name, Abteilung, Datum
54 Listening to the radioListening to the radioCalling up the radioThe radio supports the wavebands DAB* (digi-tal radio), FM and AM.Fig. 46 FM station list►Select: RADIO button.After calling up the radio, the menu that waslast open will be displayed.–To display the station list: Press the RADIObutton again. The stations which are cur-rently within reception range are displayedin the station list ð Fig. 46 and can be selec-ted.–To tune to a station from the station list:Select and confirm a station from the sta-tion list (FM: max. 200 stations; AM: max.200 stations; DAB*: max. 250 stations).–To store a station: Select a station from thestation list ð Fig. 46 and confirm it. Pressand hold the rotary pushbutton until Storestation name here appears in the memorylist. Select and confirm the desired memoryposition.–To tune to a stored station: Press controlbutton Memory. Now you can select a sta-tion from the memory list and confirm it.–To set the waveband: Press the control but-ton for Waveband. Select and confirm thedesired waveband. The current wavebandwill then appear in the display header. Or:Press the RADIO button repeatedly untilthe desired waveband appears.Note–If you leave the range of DAB* reception,radio stations of the selected ensemble1)ð page 56 are marked with a crossed-out signal reception signal. The symboldisappears as soon as the radio stationcan be received again.–The DAB waveband* also supports thetransmission standards DAB+ and DMBAudio. Please not that these transmis-sion standards are not available in allcountries.Radio functionsFig. 47 FM waveband functionsFig. 48 DAB waveband functions►Select: RADIO button > control buttonFunctions.Depending on the waveband setting, you canselect the following functions:1 Storing a stationThe selected station will appear at the nextfree position in the memory list 8 ð Fig. 48.1) Applies for the DAB waveband* when the station sort-ing setting is set to ensemble.2 Titel oder Name, Abteilung, Datum
55Listening to the radioControlsCommunicationNavigationEntertainmentSelect and confirm the desired memory posi-tion.2 Displaying the radio text (FM, DAB*)Additional information as a supplement tothe normal programme is displayed.3 Tuning to previous/next stationThe system will select the previous  or next available frequency. Or: Move the ON/OFFbutton to the left/right ( / ).4 Setting the frequency manually (FM,AM)The frequency bar will appear. Select and con-firm the desired station frequency.5 Freezing/releasing station names(FM)*The current name of the selected station willbe frozen in the memory list and marked withthe symbol A ð page 54, Fig. 46. Changingstation names are not displayed. To releasethe station name, select and confirm Freezestation names again.6 Displaying the slide show (DAB*)Additional information as a supplement tothe normal programme (such as images fromthe studio, current photographs of artists orcovers of music albums) is shown if available.7 Displaying the programme guide (EPG)(DAB*)If available, an overview of the radio stationswithin reception range and the current andfollowing radio programmes will be shown.Select and confirm a radio programme. De-tailed information on the radio programmewill now be displayed.8 Info boxDepending on whether it is available, informa-tion on the selected station (e.g. stationname, ensemble, type of programme etc.) willbe shown.9 Memory listThe memory list can contain up to 50 stationsfrom all wavebands.–To store a station: Select control buttonMemory > station name store. The selectedstation will appear at the next free positionin the memory list. Select and confirm thedesired memory position.–To tune to a stored station: Press controlbutton Memory. Now you can select a sta-tion from the memory list and confirm it.–To move a stored station: Press control but-ton Memory. Select and the station in thememory list and then select station namemove. Select and confirm the desired mem-ory position.Other settings►Select: RADIO button > control button Set-tings.Depending on the waveband setting (FM, AMor DAB*), you can select the following func-tions:Sound settingsRefer to ð page 29.Announcements*Traffic programme (TP): Traffic announce-ments can be received via FM and played bythe system irrespective of the selected wave-band. The function DAB and FM can be usedto have the system play traffic announce-ments from both wavebands while the DAB*waveband is selected. If, for example, no traf-fic announcements are available from the se-lected DAB* station, these are received in theFM waveband. The display of the TP symbol 8ð page 10, Fig. 6 shows you whether the traf-fic programme is switched on ð table onpage 56.DAB announcements: When the DAB an-nouncements are on, information on the se-lected station (e.g. news or weather informa-tion) is played. 2 Titel oder Name, Abteilung, Datum
56 Listening to the radioVolume of announcements: see ð page 30.TP symbol MeaningDisplayed The traffic programme func-tion is switched on and trafficannouncements will cut in.Greyed out The traffic programme func-tion is switched on, but trafficannouncements cannot be re-ceived.Not dis-playedThe traffic programme func-tion is switched off.Alternative frequency (FM, DAB*)on: The tuner attempts to switch to an alter-native frequency of the current station whenthe reception quality becomes weaker. Whenthe reception is lost in the DAB* waveband,the system will automatically switch to an al-ternative station in the FM waveband, if thereis one available.off: The tuner will not switch to alternativefrequencies in the FM waveband. The currentfrequency will be maintained, and in some ca-ses may no longer be received. The Alternativefrequency function is automatically switchedon again when the station is changed. Whenthe DAB waveband is set, the tuner will notswitch to alternative stations in the FM wave-band.Switch regional stations (FM)Important: The Alternative frequency functionmust be switched on.Some FM stations split up their transmissionand provide different regions with regionalprogrammes with differing content. When thefunction is on , the system switches to al-ternative region-specific frequencies.L band (DAB*)There are two wavebands for the digital radio:Band III and L band. Ensembles in the bandIII usually have a larger range extending intoseveral regions. They can be received at alltimes. In some regions DAB is broadcast inthe L band. When this option is on, stationsfrom the L band will also be received.Station sorting (FM)A-Z: The stations are displayed in the stationlist in alphabetical order. Radio stations withvariable station names are displayed after thealphabetical list; radio stations without sta-tion names appear at the end of the list.ID: The stations in the station list are sortedaccording to the station's ID (e.g. all BBC ra-dio stations are sorted together). Radio sta-tions without station names are displayed atthe end of the list.Station sorting (DAB*)A-Z: The stations are displayed in the stationlist in alphabetical order.Ensemble: Ensembles comprise various radiostations of a specific area (e.g. a town or re-gion); they are listed together as an ensemblein the station list. To open/close the list of ra-dio stations in an ensemble, select and con-firm the ensemble. Available sub-pro-grammes* (additional services provided byDAB* radio stations) are listed beneath the ra-dio station (indented).Station information (DAB*)When this function is switched on , detailedprogramme information on the selected radiostation is displayed in the station list.Reduced displayWhen this function is switched on  and thestation or memory list is open, information onthe selected station (e.g. the station name,artist, track, DAB slide show, radio text/DABslide show availability) is shown after approx.ten seconds.Delete stored stationsImportant: A station must be stored in thememory list ð page 54.You can delete stored stations individually orall at once. 2 Titel oder Name, Abteilung, Datum
57Listening to the radioControlsCommunicationNavigationEntertainmentNoteIf the Traffic programme or DAB an-nouncements* function is switched on,playback is interrupted for announce-ments. You can cancel an announcementwhile it is being played by briefly pressingthe ON/OFF button.TroubleshootingSubject AdviceA station with poor reception is no lon-ger listed in the station list after switch-ing to another station.You can store the station in advance and call it up viathe memory list ð page 54.2 Titel oder Name, Abteilung, Datum
58 Playing mediaPlaying mediaCalling up the mediamenuYou can start and operate various mediadrives via the MMI control console.Fig. 49 Possible sourcesFig. 50 PlaylistImportant: A media drive must contain audio/video files ð page 22.►Select: MEDIA button.After calling up the media, the display willshow an overview of the sources, or the filewill be played that was playing last.–To select a source: Press the control buttonfor Source. Select a source from the list andconfirm it. Or: Press the MEDIA button re-peatedly until the desired source appears.–To play an audio/video file: Select controlbutton Media centre > category (e.g. Ar-tists) > folder > track/title. Depending onavailability, the playlist will show the track/title 1 ð Fig. 50, artist 2, playback time3 and album cover 4.–To access the next level up in the structureof folders: Press the BACK button. Or: Se-lect and confirm Go up.–To access the top level in the structure offolders: Press the MEDIA button.–To select the previous/next track/title/chapter: Move the ON/OFF button to theleft/right briefly ( / ).–To fast forward/rewind an audio/video file:Move and hold the ON/OFF button to theleft/right ( / ) until the desired play-ing position has been reached.–To pause/resume playback: Briefly press theON/OFF button.–To show the playlist: Press the control but-ton for Now playing.Possible sources are ð Fig. 49:Jukebox ð page 23SD card reader ð page 24DVD drive ð page 24Audi music interface (e.g. iPod®, USB orexternal audio/video input*) ð page 25Bluetooth audio player* ð page 25Note–You can scroll rapidly through long fold-er/track lists by turning the rotary push-button quickly. The scroll speed dependson the number of folders/tracks.–If the Traffic programme (TP) or DABannouncements* function is switchedon, playback is interrupted for announce-ments ð page 55. You can cancel an an-nouncement while it is being played bybriefly pressing the ON/OFF button.–For safety reasons, the video picture isnot available while the vehicle is moving.While you are driving, only the sound isplayed.–Video playback via an iPod®/iPhone®/iPad® will not continue automaticallywhen you switch on the engine after itwas switched off completely.123452 Titel oder Name, Abteilung, Datum
59Playing mediaControlsCommunicationNavigationEntertainmentMedia centreIn the media centre several categories for se-lecting audio/video files are available.Fig. 51 SD card categories (level 1)Fig. 52 SD card categories (level 2)►Select: MEDIA button > control button Me-dia centre.Depending on the active source, you can se-lect audio/video files from the following cate-gories and copy them into the playlistð page 58, Fig. 50:1 TracksAll available tracks are displayed. Select andconfirm a track.2 ArtistsAll available artists are displayed. Select andconfirm an artist, an album and then a track.3 AlbumsAll available albums are displayed. Select andconfirm an album and then a track.4 Album browserAll available album covers are displayed. Se-lect and confirm an album cover from theoverview. The first track of the selected albumwill be played.5 FoldersThe folder structure or the track/chapter listof the selected source will be displayed. Se-lect a folder (if applicable) and select and con-firm a track.6 PlaylistsAll available playlists are displayed. Select andconfirm a playlist and then a track.7 MoreThe second level of the media centre is dis-played.8 BackThe first level of the media centre is dis-played.9 GenresAll available genres are displayed. Select andconfirm a genre (e.g. Pop), an artist, an albumand then a track.10 Find musicEnter a search term (artist, album or track)using the speller. Select and confirm OK, andthen select and confirm an audio file.11 VideosAll available video files are displayed. Select avideo file from the list and confirm it.RepeatImportant: A category (e.g. Albums) must beselected.Press the control button for Repeat to narrowdown the playlist. If you would like to copye.g. all tracks of a selected genre into theplaylist, select a category (e.g. Genres) > de-sired genre (e.g. Pop) > control button Re-peat.2 Titel oder Name, Abteilung, Datum
60 Playing mediaNote–Only the categories supported by themedium used are available. For example,CD/DVD-ROM tracks cannot be selectedvia categories such as Artists, Albums orGenres. When you are using an iPod®(source: Audi music interface), the cate-gories Podcasts, Audiobooks and Com-posers are available additionally.–For safety reasons, the video picture isnot available while the vehicle is moving.While you are driving, only the sound isplayed.–Video playback via an iPod®/iPhone®/iPad® will not continue automaticallywhen you switch on the engine after itwas switched off completely.–On some video DVDs it is not possible toselect e.g. the audio track, subtitles ortrack/chapter while they are beingplayed.–If you synchronise an iPod/iPhone/iPadwith "cloud" services (iCloud), the play-lists may not be displayed correctly onthe MMI. Use the Apple device's localmedia library.Other settingsImportant: A source must be selected.►Select: MEDIA button > control buttonSettings.Depending on the active source and the stor-age device used, you can select the followingsettings:Sound settingsRefer to ð page 29.Input levelImportant: A portable player must be connec-ted via an adapter cable with 3.5 mm jackplug*/AV adapter cable*/iPod® adapter cable(plus)* ð page 26.The volume of the portable player will beadapted to the MMI system. We recommendsetting the volume of the portable player toabout 70 percent of the maximum volume.Random playbackWhen the function is switched on , all thefiles in the playlist will be played and shown inrandom order.Repeat trackWhen the function is switched on , the cur-rent track in the playlist will be repeated.Video picture settingsImportant: A portable player must be connec-ted via an iPod® adapter cable plus*/AVadapter cable* ð page 26Picture format: The picture format can be ad-justed automatically. The width of the picturewill vary depending on the film format. Alter-natively you can select the formats 4:3 and16:9. The zoom function can be used to ex-pand the picture to the full MMI screen; selectoriginal if you would like to view the picture inthe stored format. You can set the cinema-scope option to display the picture in the for-mat 47:20.AV standard: PAL, NTSC or auto can be set asthe standard for an externally connected play-er. The same standard must also be set on theplayer. If you select the wrong AV standard,the following problems can occur: no pictureor a poor picture or no colour picture.Brightness: The brightness can be increased/reduced.Contrast: The picture contrast can be in-creased/reduced.Colour: The colour intensity can be increased/reduced.Reduced displayWhen this function is switched on  and theplaylist is open, information on the selectedtrack (e.g. the artist, album, embedded albumcover*) as well as the total and remainingplaying time will be displayed. When this dis-play is active, you can also select and confirm 2 Titel oder Name, Abteilung, Datum
61Playing mediaControlsCommunicationNavigationEntertainmenta new track or the desired playing position forthe current track by pressing the rotary push-button.Display full screenImportant: A video must be playing, and thevehicle must be stationary.The video picture will expand to the fullscreen. To switch off the full screen display,press the BACK button or any control button.The chapter list will be displayed.Display DVD menuImportant: A video DVD must be playing, andthe vehicle must be stationary.The DVD main menu will appear on the MMIdisplay. To select a menu option, move yourfinger on the MMI touch pad and press the ro-tary pushbutton.Audio trackImportant: A video DVD must be playing.The audio track (language and audio format)can be adjusted manually. It depends on thevideo DVD whether different languages andaudio formats are available.SubtitlesImportant: A video DVD must be playing.You can select the subtitle setting manually.It depends on the video DVD whether differ-ent languages are available.Child lockImportant: A video DVD must be playing, andthe password must have been entered (pass-word set at the factory: "1234").You can use the child lock to restrict videoDVD playback. Select and confirm a safety lev-el (e.g. Level 5). Eight safety levels are availa-ble for the child lock function. If you selectchild lock level 5, for example, all DVDs withsafety levels 1-5 can be played. Playback ofDVDs with a higher safety level will beblocked. To cancel all restricted access set-tings select off.Use the function Change password for childlock if you would like to edit the current pass-word.Fill/delete jukeboxRefer to ð page 23.Note–For safety reasons, the video picture isnot available while the vehicle is moving.While you are driving, only the sound isplayed.–If you change the source while the Mediamenu is open, the Repeat track and Ran-dom playback functions are deactivatedautomatically.–The DTS audio format (Digital TheaterSystems) is only supported by the DVDdrive ð page 24.–The child lock safety levels comply withthe US standards of the Motion PictureAssociation of America (MPAA). Pleasenote that DVD classifications may differin European countries.–Not all video DVDs have a child lock fea-ture.–If you enter the wrong child lock pass-word three times in a row, you will not beable to enter a password for approxi-mately one minute. The password canonly be reset by an Audi workshop.2 Titel oder Name, Abteilung, Datum
62 IndexAAdapter cable for Audi music interface . . . 25AddressEntering as a destination . . . . . . 43, 45, 47see also Destination, entering . . . . . . . . 45see also Managing contacts(directory) . . . . . . . . . . . . . . . . . . . . . 41, 43Address cardsee Managing contacts (directory) . 41, 43Album browser . . . . . . . . . . . . . . . . . . . . . . 59Alternative routes, calculating . . . . . . 48, 53AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Announcements (traffic programme) 30, 55Audi music interface . . . . . . . . . . . . . . . . . . 25Connecting/disconnecting adapter cable 26see also Media, playing . . . . . . . . . . . . . . 58Audio/video filesCopying . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Deleting . . . . . . . . . . . . . . . . . . . . . . . . . . 23Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Audio playerSettings . . . . . . . . . . . . . . . . . . . . . . . . . . 38see also Bluetooth . . . . . . . . . . . . . . . . . . 25Audi Phone Box . . . . . . . . . . . . . . . . . . . . . . 39Automatic zoom . . . . . . . . . . . . . . . . . . . . . 51BBalance (sound) . . . . . . . . . . . . . . . . . . . . . 29Bass (sound) . . . . . . . . . . . . . . . . . . . . . . . . 29Battery, charging . . . . . . . . . . . . . . . . 26, 39Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 38Audio player . . . . . . . . . . . . . . . . . . . . . . . 25Bonding mobile phone . . . . . . . . . . . . . . 33see also Media, playing . . . . . . . . . . . . . . 58Business address (storing a contact) . . . . . 41CCall lists . . . . . . . . . . . . . . . . . . . . . . . . . . . 35CallsAnswering/ignoring . . . . . . . . . . . . . . . . . 36Ending . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Holding . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Missed calls (call list) . . . . . . . . . . . . . . . . 35Options during a call . . . . . . . . . . . . . . . . 37see also Telephone . . . . . . . . . . . . . . . . . 33Centre of town, selecting . . . . . . . . . . . . . . 48Charging the battery . . . . . . . . . . . . . 26, 39Cleaning and care . . . . . . . . . . . . . . . . . . . . . 6Commands (speech dialogue system) . . . . 18Compact voice guidance . . . . . . . . . . . . . . . 30Conference calling . . . . . . . . . . . . . . . . . . . 37Connectionssee Media drives . . . . . . . . . . . . . . . . . . . . 22Control buttons . . . . . . . . . . . . . . . . . . . . . . 7ControlsMulti-function steering wheel . . . . . . . . . 12Controls and displaysMMI control console . . . . . . . . . . . . . . . . . 7Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Coordinates . . . . . . . . . . . . . . . . . . . . . . . . . 48Crosshairs, moving . . . . . . . . . . . . . . . . . . . 46DDAB (digital radio) . . . . . . . . . . . . . . . . . . . 54DataCopyright (media drives) . . . . . . . . . . . . . 22Data protection (storing a contact) . . . . . 41Data storage (media drives) . . . . . . . . . . 22Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29DeletingBluetooth devices . . . . . . . . . . . . . . . . . . 38Characters (speller) . . . . . . . . . . . . . . . . . 36Contacts . . . . . . . . . . . . . . . . . . . . . . 43, 44Favourites (navigation) . . . . . . . . . . . . . . 51Favourites (telephone) . . . . . . . . . . . . . . . 38Last destinations . . . . . . . . . . . . . . . . . . . 51Radio station . . . . . . . . . . . . . . . . . . . . . . 55Demo mode (navigation) . . . . . . . . . . . . . . 51Destination details . . . . . . . . . . . . . . . . . . . 48Destination on mapDisplaying . . . . . . . . . . . . . . . . . . . . . . . . . 48Setting as destination . . . . . . . . . . . . . . . 46Destination, entering . . . . . . . . . . . . . . . . . 45Destination, entering (special destination) 46Destination, storing . . . . . . . . . . . . . . . . . . 51Device management (Bluetooth) . . . . . . . . 38Dialling telephone number . . . . . . . . . . . . 36Digital radio (DAB) . . . . . . . . . . . . . . . . . . . 54Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 442 Titel oder Name, Abteilung, Datum
63IndexControlsCommunicationNavigationEntertainmentDisplayNavigation display . . . . . . . . . . . . . . . . . . 49Settings (video) . . . . . . . . . . . . . . . . . . . . 60Speller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9see also Map display . . . . . . . . . . . . 49, 51Driver information system . . . . . . . . . . . . . 12Drivessee Media drives . . . . . . . . . . . . . . . . . . . . 22Driving school mode . . . . . . . . . . . . . . . . . . 31DTMF tones . . . . . . . . . . . . . . . . . . . . . . . . . 36DVD drive . . . . . . . . . . . . . . . . . . . . . . . . . . 24Loading/ejecting . . . . . . . . . . . . . . . . . . . 24Notes (CD/DVD mode) . . . . . . . . . . . . . . . 22see also Media, playing . . . . . . . . . . . . . . 58Dynamic traffic avoidancesee Traffic avoidance . . . . . . . . . . . . . . . . 51Dynamic volume controlsee In-car entertainment fader . . . . . . . . 30EEnding calls . . . . . . . . . . . . . . . . . . . . . . . . . 36Ensemble (station sorting) . . . . . . . . . . . . 55Entering (using the speller) . . . . . . . . . . . . . 9Excluding route . . . . . . . . . . . . . . . . . . . . . . 53Exporting/importing contacts . . . . . . . . . . 43External playersConnecting/disconnecting . . . . . . . . . . . . 26Video picture settings . . . . . . . . . . . . . . . 58FFactory settings . . . . . . . . . . . . . . . . . . . . . 31Fader (sound) . . . . . . . . . . . . . . . . . . . . . . . 29Fast forward (track) . . . . . . . . . . . . . . . . . . 59FavouritesAs destination . . . . . . . . . . . . . . . . . . . . . 47Calling . . . . . . . . . . . . . . . . . . . . . . . 35, 50Deleting . . . . . . . . . . . . . . . . . . . . . . 38, 51Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Storing . . . . . . . . . . . . . . . . . . . . . . . 38, 50File formats . . . . . . . . . . . . . . . . . . . . . . . . 27FilesCopying . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Deleting . . . . . . . . . . . . . . . . . . . . . . . . . . 23FindingBluetooth audio player . . . . . . . . . . . . . . 25Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Mobile phone . . . . . . . . . . . . . . . . . . . . . . 33FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Folder, selecting . . . . . . . . . . . . . . . . . . . . . 58Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 54GGALA (speed-dependent volume control) . 29GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29HHandsfree . . . . . . . . . . . . . . . . . . . . . . . . . . 33Handsfree Profile . . . . . . . . . . . . . . . . . . . . 33Holding calls . . . . . . . . . . . . . . . . . . . . . . . . 37Home address . . . . . . . . . . . . . . . . . . . . . . . 47see also Favourites . . . . . . . . . . . . . . . . . 50How to use the MMIMMI control console . . . . . . . . . . . . . . . . . 7Multi-function steering wheel . . . . . . . . . 12Speech dialogue system . . . . . . . . . . . . . 17IImporting/exporting contacts . . . . . . . . . . 43In-car entertainment fader . . . . . . . . . . . . 30Individual speech training . . . . . . . . . . . . . 31Info box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Information on country . . . . . . . . . . . . . . . 53Input level . . . . . . . . . . . . . . . . . . . . . . . . . . 60iPod®Connecting/disconnecting . . . . . . . . . . . . 26Input level . . . . . . . . . . . . . . . . . . . . . . . . 60Video picture settings . . . . . . . . . . . . . . . 60see also Media, playing . . . . . . . . . . . . . . 58JJack plugAudi music interface . . . . . . . . . . . . . . . . 25Jukebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Copying files . . . . . . . . . . . . . . . . . . . . . . . 23Deleting files . . . . . . . . . . . . . . . . . . . . . . 23Memory status . . . . . . . . . . . . . . . . . . . . . 23see also Media, playing . . . . . . . . . . . . . . 582 Titel oder Name, Abteilung, Datum
64 IndexLLanguage, setting . . . . . . . . . . . . . . . . . . . . 31Last destinationsDeleting . . . . . . . . . . . . . . . . . . . . . . . . . . 51Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . 47L band (radio) . . . . . . . . . . . . . . . . . . . . . . . 55Letters, entering (using the speller) . . . . . . 9Licence conditions . . . . . . . . . . . . . . . . . . . . 6Loading times (media drives) . . . . . . . . . . . 22MMailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Mailbox number . . . . . . . . . . . . . . . . . . . . 38Managing contacts (directory)Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Favourites . . . . . . . . . . . . . . . . . . . . . . . . . 38Importing/exporting . . . . . . . . . . . . . . . . 43Reading . . . . . . . . . . . . . . . . . . . . . . . . . . 43Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42MapCalling up . . . . . . . . . . . . . . . . . . . . . . . . . 45Entering a destination . . . . . . . . . . . . . . . 46Map display . . . . . . . . . . . . . . . . . . . . . 49, 51Measurement units . . . . . . . . . . . . . . . . . . 31Media centre . . . . . . . . . . . . . . . . . . . . . . . . 59Media drivesAudi music interface . . . . . . . . . . . . . . . . 25Bluetooth audio player . . . . . . . . . . . . . . 25DVD drive . . . . . . . . . . . . . . . . . . . . . . . . . 24File formats . . . . . . . . . . . . . . . . . . . . . . . 27Jukebox . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22SD card reader . . . . . . . . . . . . . . . . . . . . . 24Troubleshooting . . . . . . . . . . . . . . . . . . . . 28Media, playing . . . . . . . . . . . . . . . . . . . . . . 58Multi-function steering wheel . . . . . . . . . 15Other settings . . . . . . . . . . . . . . . . . . . . . 60Speech dialogue system . . . . . . . . . . . . . 21Memory capacity (directory) . . . . . . . . . . . 44Memory list (radio) . . . . . . . . . . . . . . . . . . . 54Memory status (jukebox) . . . . . . . . . . . . . . 23Menu language . . . . . . . . . . . . . . . . . . . . . . 31Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Microphone on/off . . . . . . . . . . . . . . . . . . . 37Missed calls (call list) . . . . . . . . . . . . . . . . . 35MMIControls and displays . . . . . . . . . . . . . . . . . 5How to use the MMI . . . . . . . . . . . . . . . . . . 7Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Switching on/off . . . . . . . . . . . . . . . . . . . . 7Symbols/menus . . . . . . . . . . . . . . . . . . . . 10System update . . . . . . . . . . . . . . . . . . . . . 31MMI touchAdjusting balance/fader . . . . . . . . . . . . . . 8Adjusting sound focus . . . . . . . . . . . . . . . . 8Browsing through album covers . . . . . . . . 8Confirming entry . . . . . . . . . . . . . . . . . . . . 8Deleting entry . . . . . . . . . . . . . . . . . . . . . . 8DVD main menu . . . . . . . . . . . . . . . . . . . . . 8Entering letters/numbers/symbols . . . . . 8Moving map . . . . . . . . . . . . . . . . . . . . . . . . 8Mobile phoneAs audio player (other settings) . . . . . . . 38Bonding . . . . . . . . . . . . . . . . . . . . . . . . . . 33Inserting in Audi Phone Box . . . . . . . . . . 39MP3 player, connecting/disconnecting . .25, 26Multi-function steering wheelHow to use the controls . . . . . . . . . . . . . . 12Listening to the radio . . . . . . . . . . . . . . . . 15Navigation . . . . . . . . . . . . . . . . . . . . . . . . 14Phoning . . . . . . . . . . . . . . . . . . . . . . . . . . 13Playing media . . . . . . . . . . . . . . . . . . . . . . 15Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 12NNavigation . . . . . . . . . . . . . . . . . . . . . . . . . . 45Multi-function steering wheel . . . . . . . . . 14Speech dialogue system . . . . . . . . . . . . . 19see also Route guidance . . . . . . . . . . . . . 45Navigation cue (voice guidance) . . . . . . . . . 51Navigation destinationStoring . . . . . . . . . . . . . . . . . . . . . . . . . . . 51see also Destination, entering . . . . . . . . 45Navigation displayDriver information system . . . . . . . . . . . . 14MMI display . . . . . . . . . . . . . . . . . . . . . . . 49New contactsee Managing contacts (directory) . 41, 43New destinationsee Destination, entering . . . . . . . . . . . . 45Noise compensation (GALA) . . . . . . . . . . . . 292 Titel oder Name, Abteilung, Datum
65IndexControlsCommunicationNavigationEntertainmentNotesCleaning and care of MMI control console 6Data protection (storing a contact) . . . . . 41DVD drive . . . . . . . . . . . . . . . . . . . . . . . . . 22Media drives . . . . . . . . . . . . . . . . . . . . . . . 22Software licences . . . . . . . . . . . . . . . . . . . . 6Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . 5Numbers dialled . . . . . . . . . . . . . . . . . . . . . 35Numbers, entering (using the speller) . . . . 9OOrientationsee Map display . . . . . . . . . . . . . . . . 49, 51PPausesee Pausing/resuming playback . . . . . . . 59Pausing/resuming playback . . . . . . . . 15, 59Petrol station recommendation . . . . . . . . . 51Phone pre-installationsee Telephone . . . . . . . . . . . . . . . . . . . . . 33Picture format . . . . . . . . . . . . . . . . . . . . . . 60Playing position (media) . . . . . . . . . . . . . . . 59Playing possible commands . . . . . . . . . . . . 18Portable player, connecting/disconnect-ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26Presentation mode . . . . . . . . . . . . . . . . . . . 51Private address (storing a contact) . . . . . . 41Programme guide (radio) . . . . . . . . . . . . . . 54Public contacts, displaying . . . . . . . . . . . . . 44RRadio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Multi-function steering wheel . . . . . . . . . 15Other settings . . . . . . . . . . . . . . . . . . . . . 55Speech dialogue system . . . . . . . . . . . . . 21Troubleshooting . . . . . . . . . . . . . . . . . . . . 57Radio stationDeleting . . . . . . . . . . . . . . . . . . . . . . . . . . 55Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Radio text . . . . . . . . . . . . . . . . . . . . . . . . . . 54Random playback . . . . . . . . . . . . . . . . . . . . 60Reduced displayMedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Repeat (audio file) . . . . . . . . . . . . . . . . . . . 60Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Restart (MMI) . . . . . . . . . . . . . . . . . . . . . . . 31Rewind (track) . . . . . . . . . . . . . . . . . . . . . . . 59Ring tone settings . . . . . . . . . . . . . . . 30, 38Rotary pushbutton . . . . . . . . . . . . . . . . . . . . 7Route criteria . . . . . . . . . . . . . . . . . . . . . . . 51Route guidanceIn driver information system . . . . . . . . . 14On display . . . . . . . . . . . . . . . . . . . . . . . . . 49Starting/stopping . . . . . . . . . . . . . . . . . . 48Route list . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Route plansee Tour plan . . . . . . . . . . . . . . . . . . . . . . 48SSafetyWhile navigating . . . . . . . . . . . . . . . . . . . 45While using telephone . . . . . . . . . . . . . . . 33SD card readerInserting/removing SD card . . . . . . . . . . 24see also Media, playing . . . . . . . . . . . . . . 58Search areas (special destinations) . . . . . . 46Secure Simple Pairing . . . . . . . . . . . . . . . . . 33SecurityCopyright/data storage (media drives) . . 22Data protection (storing a contact) . . . . . 41Selecting a waveband (radio) . . . . . . . . . . . 54SettingsDirectory . . . . . . . . . . . . . . . . . . . . . . . . . . 44Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Navigation . . . . . . . . . . . . . . . . . . . . . . . . 50Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55System . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Telephone . . . . . . . . . . . . . . . . . . . . . . . . . 38Setup MMI (system settings) . . . . . . . . . . . 31Short dialogue . . . . . . . . . . . . . . . . . . . . . . 31Showing as favourite (navigation destina-tion) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Slide show (radio) . . . . . . . . . . . . . . . . . . . . 54Software licences . . . . . . . . . . . . . . . . . . . . . 6Software version . . . . . . . . . . . . . . . . . . . . . 31Sound adjustment (Tone) . . . . . . . . . . . . . . 292 Titel oder Name, Abteilung, Datum
66 IndexSource, selecting (media) . . . . . . . . . . . . . . 58Special destination . . . . . . . . . . . . . . . 46, 48Speech dialogue system . . . . . . . . . . . . . . . 17Adapting to pronunciation . . . . . . . . . . . 31Global commands . . . . . . . . . . . . . . . . . . 18Help commands . . . . . . . . . . . . . . . . . . . . 18Input help . . . . . . . . . . . . . . . . . . . . . . . . 17Interrupting a spoken cue . . . . . . . . . . . . 17Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 31Speed display . . . . . . . . . . . . . . . . . . . . . . . 51Speed display on driving school vehicles . . 31Speller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Spoken cuesSettings . . . . . . . . . . . . . . . . . . . . . . 30, 31Speech dialogue system . . . . . . . . . . . . . 17Station (radio)Alternative frequency . . . . . . . . . . . . . . . 55Station information . . . . . . . . . . . . . . . . . 55Station list . . . . . . . . . . . . . . . . . . . . . . . . 54Station sorting . . . . . . . . . . . . . . . . . . . . . 55see also Radio station . . . . . . . . . . . . . . . 54Steering wheel button . . . . . . . . . . . . . . . . 12Stopover . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Stored telephone number, dialling . . . . . . 35Subwoofer (sound) . . . . . . . . . . . . . . . . . . . 29Summer time . . . . . . . . . . . . . . . . . . . . . . . 29Switching between calls . . . . . . . . . . . . . . . 37Switching on/off . . . . . . . . . . . . . . . . . . . . . . 7Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . 10System settings . . . . . . . . . . . . . . . . . . . . . 29System update . . . . . . . . . . . . . . . . . . . . . . 31TTelephone . . . . . . . . . . . . . . . . . . . . . . . . . . 33Multi-function steering wheel . . . . . . . . . 13Options during a call . . . . . . . . . . . . . . . . 37Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 38Speech dialogue system . . . . . . . . . . . . . 18Telephone number, storing . . . . . . . . . . . . 37Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Tone (sound) . . . . . . . . . . . . . . . . . . . . . . . . 29Tour plan . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Tour settings . . . . . . . . . . . . . . . . . . . . . . . . 53TP (traffic programme) . . . . . . . . . . . . . . . . 55TrackFast forward/rewind . . . . . . . . . . . . . . . . 59Pausing/resuming . . . . . . . . . . . . . . . . . . 59Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Track display . . . . . . . . . . . . . . . . . . . . . . . . 60Traffic announcementsSpeech dialogue system . . . . . . . . . . . . . 21Traffic avoidance . . . . . . . . . . . . . . . . . . . . . 51Traffic informationShowing on map . . . . . . . . . . . . . . . . . . . 50Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Traffic programme (TP) . . . . . . . . . . . . . . . 55Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . 5Treble (sound) . . . . . . . . . . . . . . . . . . . . . . . 29TroubleshootingMedia drives . . . . . . . . . . . . . . . . . . . . . . . 28Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57UUnits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Updating MMI software . . . . . . . . . . . . . . . 31VVersion information . . . . . . . . . . . . . . . . . . 31Video picture settings . . . . . . . . . . . . . . . . 60VolumeAdjusting using multi-function steeringwheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Adjusting using ON/OFF button . . . . . . . . 7In-car entertainment fader . . . . . . . . . . . 30Input level . . . . . . . . . . . . . . . . . . . . . . . . 60Media volume . . . . . . . . . . . . . . . . . . . . . . . 7Parking aid . . . . . . . . . . . . . . . . . . . . . . . . 30System volume . . . . . . . . . . . . . . . . . . . . . 30WWavebandsee Selecting a waveband (radio) . . . . . . 54ZZoom (automatic) . . . . . . . . . . . . . . . . . . . . 51Zoom (scale)see Map display . . . . . . . . . . . . . . . . 49, 512 Titel oder Name, Abteilung, Datum

Navigation menu