Harman Becker Automotive Systems BEB019 Bluetooth hands free car kit User Manual

Harman Becker Automotive Systems Bluetooth hands free car kit

Contents

User Manual

200Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG
CommunicationAll of the possibilities available for mobilecommunication with your family, friend, businesspartners or service providers are summarised inthis chapter.201Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG
Telephone*OverviewPrincipleOnce the mobile phone has been logged in tothe vehicle, it can be operated via iDrive, thebuttons on the steering wheel and by voice con‐trol. A logged-in mobile phone is detected au‐tomatically with the ignition switched on as soonas it is in the vehicle.If the telephone is logged on in the rear*, threemore mobile phones can be logged on.Using the telephone while the vehicle isbeing drivenOnly make inputs when traffic activity permits.As the driver, do not make telephone calls withthe mobile phone in your hand while the vehicleis being driven; use the hands-free speakingsystem. The car's occupants and other roadusers could otherwise be put at risk.◀Snap-in adapter*The snap-in adapter enables:▷Storage of the mobile phone.▷Charging of the battery.▷Connection to the external aerial of the ve‐hicle.This ensures better network reception anduniform reproduction quality.Suitable mobile phonesAsk your Service Centre which mobile phoneswith a Bluetooth interface are supported by themobile phone preparation. For more informa‐tion, please visit www.bmw.com/bluetooth.These suitable mobile phones have a certainsoftware version that supports the functions ofthe vehicle described below.Malfunctions could occur with other types ofmobile phone.Do not operate a mobile phone that has beendetected by the vehicle using the keypad of themobile phone, as otherwise malfunctions canoccur.Logging mobile phone on/offRequirements▷Suitable mobile phone.▷Mobile phone operational.▷ Bluetooth in the vehicle, see page 203, andmobile phone activated.▷Bluetooth presettings are necessary on themobile phone, e.g. connection without con‐firmation or visibility, see Operating Instruc‐tions of the mobile phone.▷Specified number with at least 4 positions asBluetooth passkey, e.g. 1234. Only requiredfor a one-off registration.▷Ignition switched on.Connecting and logging inLogging on mobile phoneOnly log in the mobile phone with the ve‐hicle stationary, as otherwise your lack of atten‐tion can endanger the occupants of your vehicleand other road users.◀Run the login completely at either the front orrear control display.1. "Telephone"2. "Bluetooth"3. "Add new device"Seite 202202Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone
The Bluetooth name of the vehicle is dis‐played.4. Performing other operations on the mobilephone, see Operating Instructions of themobile phone: e.g. finding/connecting Blue‐tooth device or new device.The Bluetooth name of the vehicle is shownon the display of the mobile phone.5. Select the Bluetooth name of the vehicle onthe display of the mobile phone.Request via iDrive or mobile phone to enterthe same Bluetooth passkey.6. Enter and confirm passkey.If the login was successful, the mobile phoneappears in the first position in the list of mobilephones.If login was not successful: what to do if, seepage 204.After logging in for the first time▷The mobile phone is detectable/connectedin the vehicle after a maximum of 2 minutesif the engine is running or the ignition isswitched on.▷After detection, phone book entries aretransferred from the SIM card and/or mobilephone to the vehicle, depending on the mo‐bile phone.▷Three mobile phones can be logged in.▷On some mobile phones, certain settingsmight be necessary, e.g. authorisation or se‐cure connection, see Operating Instructionsof the mobile phone.Activating/deactivating BluetoothconnectionBluetooth use is not permitted everywhere.Comply with relevant local laws.1. "Telephone"2. Call up "Options".3. "Bluetooth"Connecting a certain mobile phoneIf more than one mobile phone is detected by thevehicle, the mobile phone furthest up the list isconnected. If another mobile phone is to be con‐nected, this can be selected.1. "Telephone"2. "Bluetooth"All logged-in mobile phones are listed.3. Select the mobile phone to be connected.Seite 203203Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
Logging off a mobile phone1. "Telephone"2. "Bluetooth"All logged-in mobile phones are listed.3. Highlight the mobile phone to be logged out.4. Call up "Options".5. "Remove device from list"What to do if...Not all phone book entries are displayed?▷The transfer of the phone book entries is notyet concluded; observe the display in thestatus field.▷If might be that only the phone book entriesof the SIM card* or of the mobile phone aretransferred.▷It might be that phone book entries with spe‐cial characters cannot be displayed.The mobile phone could not be logged on?▷Is the mobile phone supported? Informationfrom your Service Centre.▷Do the Bluetooth passkeys on the mobilephone and vehicle match? Enter the samepasskey on the mobile phone and via iDrive.▷Duration for passkey input longer than30 seconds? Repeat the login.▷Too many Bluetooth devices connected tothe mobile phone? If necessary, delete themobile phone connection with other devi‐ces.▷Is the mobile phone no longer reacting?Switch the mobile phone off and on again.▷Repeat the login.▷If all the points in the list have been checkedand the mobile phone can still not be loggedin, contact the BMW Hotline.ControlsIncoming callReceiving a callIf the number of the caller is stored in the tele‐phone book and is transferred from the network,the name of the contact is displayed.Accepting a callVia button on the steering wheelPress the button.Via instrument cluster"Accept"Via iDrive"Accept"Rejecting a callVia instrument cluster"Reject"Via iDrive"Reject"Seite 204204Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone
Ending a callVia button on the steering wheelPress the button.Via instrument cluster"Hang up"Via iDrive1. "Telephone"2. "Active calls"3. Select the active call.Entering phone numbersDialling a number1. "Telephone"2. "Dial number"3. Select the digits individually.4. Select the symbol.Calls with a number of participantsGeneralIt is possible to switch between calls and mergetwo calls to set up a conference. The functionsmust be supported by the mobile phone andservice provider.Accepting a call during another callIt might be necessary for the service provider toenable this function and the mobile phone setaccordingly.If there is a second call during an ongoing call,you hear a call waiting signal.1. "Accept"The call is accepted and the existing call is held.Setting up a second callSet up another call during a call.1. "Telephone"2. "Active calls"3. "Hold"The current call is held.4. Dial a new phone number or select from alist.Switching between two calls,alternatingActive call: indicated by a red telephone hand‐set.Held call: indicated by a green telephone hand‐set.To switch to the held call, select this.Setting up a conferenceTwo calls can be merged to set up a telephoneconference.1. Setting up two calls.Seite 205205Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
2. "Conference call"On termination, both calls are always termina‐ted.Phone bookDisplaysThe telephone book accesses the contacts, seepage 223, and shows all the contacts where atelephone number is entered. The entries canbe selected and a call set up.1. "Telephone"2. "Phone book"All contacts with telephone number are dis‐played. A symbol indicates the storage locationof the contacts.Calling a contact1. Select the desired contact.In the case of contacts with a telephonenumber, a connection is established imme‐diately.In the case of contacts with a number of tel‐ephone numbers:2. Select the desired phone number.The connection is established.Editing contactsChanging the entries in the "Contacts", seepage 223, menu. If a contact is changed, thechanges are not saved on the mobile phone. Acopy of the entry is saved in the vehicle.1. Highlight the contact.2. Call up "Options".3. "Edit entry"The contact can be edited.RediallingGeneralThe eight phone numbers last dialled are stored.Dialling numbers via the instrumentclusterPossible if no call is currently active.1. Press the button on the steeringwheel.2. Select the desired phone number.The connection is established.Dialling numbers via iDrive1. "Telephone"2. "Last number redial"3. Select the desired entry.The connection is established.Deleting an individual entry or all entries1. Highlight the entry.2. Call up "Options".3. "Delete entry" or "Delete list"Seite 206206Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone
Saving an entry in Contacts1. Highlight the entry.2. Call up "Options".3. "Save as new contact" or "Add to existingcontact"4. Select the type of number: "Home","Work" or "Mobile".5. If necessary, complete the entries.6. If applicable, "Save as new contact".Incoming callsDisplaying callsThe last 20 incoming calls are displayed.1. "Telephone"2. "Received calls"Calling a number from the listSelect an entry.The connection is established.Deleting an individual entry or allentries1. Highlight the entry.2. Call up "Options".3. "Delete entry" or "Delete list"Saving an entry in Contacts1. Highlight the entry.2. Call up "Options".3. "Save as new contact" or "Add to existingcontact"4. Select the type of number: "Home","Work" or "Mobile"5. If necessary, complete the entries.6. If applicable, "Save as new contact".MessagesGeneralDisplay of various messages:▷SMS.The display of SMSs depends on whetherdata transfer into the vehicle is supported bythe mobile phone. It is possible that SMSsare not supported by the service provider ormust be enabled separately. The first time amobile phone logs on, transmission of theSMS can take a few minutes.▷Messages from My Info in the BMW AssistPortal.▷Messages from BMW Assist informationservice.▷Emails from BMW Online.Displaying messages1. "Telephone"2. "Messages"3. Select the desired message.A symbol indicates the type of message:Symbol Message type SMS My Info Message from information service,see page 226SMSCalling the sender of an SMS1. Select the desired message.2. Call up "Options".3. "Call sender"Seite 207207Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
Saving the sender in Contacts1. Highlight the desired message.2. Call up "Options".3. "Save as new contact" or "Add to existingcontact"MyInfoReplyingSend a predefined reply.1. Select the desired message.2. Call up "Options".3. "Answer"Starting route guidance1. Select the message that contains the de‐sired destination.2. Call up "Options".3. "Start guidance" or "Insert as stagedestination"Dialling the number in the message1. Select the message that contains the de‐sired number.2. Call up "Options".3. "Call"Message from information serviceIncorporating an address into routeguidance1. Select the message.2. "Start guidance" or "Insert as stagedestination"3. If necessary, start the route guidance.Dialling a phone number1. Select the message.2. "Call"Saving an address1. Select the message.2. Call up "Options".3. "Save contact in car"Deleting messages1. Select the message to be deleted.2. Call up "Options".3. "Delete message" or "Delete all messages"Emails from BMW Online*Emails from the BMW Online portal can be dis‐played. This requires registration at BMW On‐line, see page 228.1. "Telephone"2. "Messages"3. Call up "Options".4. "E-mail (BMW Online)"If this text is not displayed, register at BMWOnline.Hands-free systemGeneralCalls taken via the hands-free system can becontinued via the mobile phone and vice versa.From mobile phone to the hands-freesystemCalls that were started outside the Bluetoothrange of the vehicle can be continued via thehands-free system when the ignition is switchedon.Depending in the mobile phone, there is an au‐tomatic switch to the hands-free mode.If there is no automatic switchover, proceed ac‐cording to what appears on the display of theSeite 208208Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone
mobile phone, see also operating instructionsfor the mobile phone.From the hands-free system to themobile phoneCalls taken via the hands-free system can alsobe continued via the mobile phone, dependingon the mobile phone.Proceed according to what appears on the dis‐play of the mobile phone, see also operating in‐structions for the mobile phone.Depending on the mobile phone, if there is poorreception in the mobile communications net‐work it can occur that there are automaticswitchovers from the hands-free system to themobile phone.Snap-in adapter*Installed positionIn the centre armrest.Inserting the snap-in adapterPress the button and take out the cover.Insert the snap-in adapter at the front, arrow 1and press downwards, arrow 2, until it snaps intoplace.Inserting the mobile phone1. Depending on the mobile phone, removethe protective cap from the aerial connectorof the mobile phone.2. With the keys upwards, push the mobilephone towards the electrical connectionsand press downwards until it snaps intoplace.Removing the mobile phonePress the button and pick up the mobile phone.Seite 209209Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
Telephone in the rear*OverviewGeneralThe telephone in the rear consists of a handsetand a snap-in adapter.This enables telephony via a SIM card in thesame way as with a mobile phone, with the ad‐vantage of not having to use the hands-free sys‐tem of the vehicle.The snap-in adapter must be logged in to thevehicle. There is then the possibility in the frontseats to make phone calls via the hands-freesystem and in the rear only via the handset.Calls can be transferred from the handset to thehands-free system and vice versa.Options for useAs a substitute for the connectedmobile phoneThe snap-in adapter is logged in to the vehicle,see page 221. This means that a call can bemade both in the hands-free mode and in theprivate mode. Requirement: SIM card, seepage 211, is inserted or SAP connection, seepage 210, is active.Parallel use of the mobile phone andhandsetThe mobile phone remains logged in to the ve‐hicle. In addition, the snap-in adapter and hand‐set are used. This autonomous installationmeans that a call can only be made in the privatemode. Calls via the mobile phone are only pos‐sible in the hands-free mode. Requirement: SIMcard, see page 211, is inserted or SAP connec‐tion, see page 210, is active.TWIN cardsIf so-called TWIN cards (with the same phonenumber) are used as SIM cards in the snap-inadapter and mobile phone, attention must bepaid to ensuring that the device not being usedis switched off. Otherwise perfect functioning ofthe telephone in the rear is not ensured.SIM Access Profile (SAP)GeneralThe SIM Access Profile can be used to connectyour mobile phone with the handset via thesnap-in adapter.PrincipleSAP means that the snap-in adapter uses Blue‐tooth to access SIM card of the mobile phonewith Bluetooth capability.The calls and the connection to the external aer‐ial run via the snap-in adapter. Radiation withinthe vehicle is suppressed.If the mobile phone is connected to the vehicleand downloading the internal phone book en‐tries of the mobile phone is supported, the in‐ternal phone book can be displayed on the hand‐set and on the Control Display.Requirement▷Mobile phone with SAP capability. Overviewof compatible models at www.bmw.com/bluetooth.de.▷Mobile phone switched on with activatedBluetooth interface.▷No SIM card is inserted in the snap-inadapter.Connecting the mobile phone via SAP1. Press the button on the snap-inadapter for approx. 6 seconds.The LED above the button flashes, alternat‐ing green and orange.2. Select "Connect" on the handset.3. The 16-digit SAP PIN is displayed on thehandset.4. Enter the displayed PIN in the mobile phone.Seite 210210Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone in the rear
Breaking the connection▷Disable the SAP connection on the mobilephone. If the Bluetooth interface is not dis‐abled, the connection is automatically re‐stored after approx. 10 seconds.▷Switch off the handset.▷Switch off the ignition for longer than 3 mi‐nutes.▷Take the mobile phone to a distance approx.10 metre away from the vehicle.Handset and snap-in adapterSnap-in adapter and handset in the centre arm‐rest in the rear.RemovingPull the handset upwards.Inserting1. Snap the handset into place at the top, ar‐row 1.2. Press the handset downwards, arrow 2.Inserting/removing the SIM cardInserting:1. Press the SIM card slot downwards, arrow 1.2. Push the SIM card into the slot until it snapsinto place, arrow 2.3. Close the slot.Removing:1. Press the SIM card slot downwards, arrow 1.2. Press the upper edge downwards.Removing/installing the snap-inadapterSeite 211211Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
Removing:1. Press the button, arrow 1.2. Pull the snap-in adapter upwards and for‐wards, arrow 2.Installing:1. Snap into place at the lower end.2. Press downwards until it snaps into place,arrow 1.OperationBasic principlesConnect button Press the button. Select the displayed orhighlighted phone number, accept the call.On/off/exit button Press the button. Press longer: switches onand off.Press briefly: terminates a call.Information regarding switching on/offIf the handset is switched off and on again whilethe vehicle is being driven, the Bluetooth con‐nection in the control display must be restored.Requirement for standby indicator▷The SIM card is inserted in the snap-inadapter or a mobile phone is connected viathe SIM Access Profile.▷The handset is switched on.▷The PIN has been entered or the PIN query,see page 220, has been suppressed.▷Entering the PIN is also possible on the con‐trol display if the snap-in adapter is connec‐ted to the vehicle.▷Network reception is ensured.▷The PIN has been entered or the PIN queryhas been suppressed.The standby indicator and name of the networkoperator are displayed.Display buttonsThe current functions of these buttons areshown in the bottom line of the display.Press the button: selects the function.Press the arrow buttons: browses in menus.Press the left/right arrow buttons: sets the callvolume during a call.Text inputPress a numerical key (1 to 9) repeatedly untilthe desired character is displayed. If the nextletter is entered with the same key as the currentletter, wait briefly until the cursor is displayedagain.Insert blanks using the 0 key.Seite 212212Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone in the rear
Switch between upper and lower case with the# key.Insert special characters using the 1 key.Switch to number mode by pressing and holdingthe # key.Initiating a callVia numerical keys1. Enter the complete phone number with areacode/national dialling code.2. "Delete" last digit is deleted.3. "Dial" or press the connect button.Via repeat diallingThe last ten phone numbers dialled are auto‐matically stored.1. Press the button.The phone number last dialled is displayed.2. Use the arrow buttons to select the phonenumber.3. Press the connect button.Via telephone book1. "Ph.book"2. Enter the first letters of the name or browsewith the arrow buttons.3. Use the arrow buttons to select an entry.4. Press the connect button.Via SMS1. "Menu"2. "Text messag."3. "Ok"4. "Inbox" or "Outbox"5. "Ok"6. Select an entry.7. "Ok"8. "Call"9. "Ok"Via the call list1. "Menu"2. "Last calls"3. "Missed calls" or "Received calls"4. "Ok"5. Dial a phone number.6. "Call number" or press the connect button.Incoming callAccepting a callIf the number of the caller is stored in the tele‐phone book and is transferred from the network,the name of the telephone book entry is dis‐played.▷Press the button or "Answer".▷With call acceptance, see page 219, activa‐ted, take the handset from its cradle.Rejecting a callPress the button or "End call".Call ForwardPrincipleIncoming calls are diverted to another telephonenumber.A password might be required to set this up.Other information from the service provider, seepage 222.Calling up the menu1. "Menu"2. "Settings"3. "Ok"4. "Call forward"5. "Ok"Diverting callsIn the "Call forward" menu:1. "Voice calls"2. "Ok"Seite 213213Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
3. "Forward all calls", "If busy", "If not avail." or"If no answer"4. "Ok"5. "Deactivate" or "Activate"6. Enter the phone number for the diversion.7. "Ok"Diverting fax and data inputsIn the "Call forward" menu:1. "Fax calls" or "Data calls"2. "Deactivate" or "Activate"3. Enter the phone number for the diversion.4. "Ok"Checking the statusSelect call forwarding.1. "Status"2. "Ok"3. The status is displayed.Disabling all diversionsIn the "Call forward" menu:1. "Deactivate"2. "Ok"Phone bookSelect the storage locationIf the mobile phone supports the Phone BookAccess Profile (PBAP) and the function is active,the internal memory of the telephone book isselected as the storage location. The function"Memory place" is then not available.Select the SIM card or snap-in adapter as stor‐age location.1. "Menu"2. "Ph.book"3. "Ok"4. "Memory place"5. "Ok"6. "SIM" or "GSM-SIA" or "Both"7. "Ok"Setting the display1. "Menu"2. "Ph.book"3. "Ok"4. "Private Ph.book"5. "Ok"Available memory1. "Menu"2. "Ph.book"3. "Ok"4. "Memory place"5. "Ok"6. "Status"7. "Ok"New entrySave phone numbers in the international format.Press the asterisk key until + is shown on thedisplay.1. "Menu"2. "Ph.book"3. "Ok"4. "New entry"5. "Ok"6. Enter the name.7. "Ok"8. Enter the complete phone number.9. "Ok"Entry from call listsSave phone numbers from call lists in the tele‐phone book.1. "Menu"2. "Last calls"3. "Ok"4. "Numbers dialled", "Missed calls" or"Received calls"Seite 214214Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone in the rear
5. "Ok"6. Select an entry.7. "Store number"8. "Ok"9. Enter the name and number and confirmeach with "Ok".Entry from SMS1. "Menu"2. "Text messag."3. "Ok"4. "Inbox" or "Outbox"5. "Ok"6. Select SMS and confirm with "Ok".7. "Options"8. "Extract number"9. "Ok"Editing an entry1. "Menu"2. "Ph.book"3. "Ok"4. "Find entry"5. "Ok"6. Select SMS and confirm with "Ok".7. "Edit"8. "Ok"9. Edit the name and number and confirm with"Ok".Deleting an entry1. "Menu"2. "Ph.book"3. "Ok"4. "Find entry"5. "Ok"6. Select an entry.7. "Ok"8. "Delete"9. "Yes"Show details1. "Menu"2. "Ph.book"3. "Ok"4. "Find entry"5. "Ok"6. Select an entry.7. "Ok"8. "Details"SMSReading SMSsPrincipleSMSs are text messages that can be receivedand sent.Received SMSs are stored automatically.Observe the memory status, see page 217, onthe SIM card.If necessary, delete stored SMSs so that you canreceive new SMSs.Setting the SMS Service CentreThe phone number of the Service Centre isstored.1. "Menu"2. "Text messag."3. "Ok"4. "Settings"5. "Ok"6. "Servicecentre"7. "Ok"8. Check the phone number.9. "Ok"Reading SMSs1. "Menu"2. "Text messag."3. "Ok"4. "Inbox"Seite 215215Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
5. Select SMS.6. "Ok"Replying to an SMS1. "Options"2. "Reply"3. Enter text, see page 212.4. "Options"5. "Send"Deleting an SMS1. "Menu"2. "Text messag."3. "Ok"4. "Inbox" or "Outbox"5. Select an entry and confirm with "Ok".6. "Options"7. "Delete"8. "Ok"9. "Yes"Writing an SMSCreating and sending an SMS1. "Menu"2. "Text messag."3. "Ok"4. "Text messag."5. Create an SMS, see page 212.6. "Send"7. "Ok"8. Enter the phone number or use "Findentry" to open the telephone book and se‐lect an entry.9. Confirm with "Ok" and select "Send".Creating a templateTemplates are stored SMSs with frequentlyused texts.1. "Menu"2. "Text messag."3. "Ok"4. "Text messag."5. Enter text, see page 212.6. "Options"7. "Insert symbol" or "Insert template"8. "Ok"9. Select the symbol or a template and confirmwith "Ok".Editing templates1. "Menu"2. "Text messag."3. "Ok"4. "Templates"5. "Ok"6. Select the template and confirm with "Ok".7. Edit the text of the template.8. "Options"9. Select "Send" or "Store".Saving created SMSsCreated SMSs can be stored for further use onthe SIM card.1. "Menu"2. "Text messag."3. "Ok"4. "Text messag."5. Enter text, see page 212.6. "Options"7. "Store"8. "Ok"Saving automaticallySave sent SMSs automatically.1. "Menu"2. "Text messag."3. "Ok"4. "Settings"5. "Ok"Seite 216216Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone in the rear
6. "Store text msg"7. "Ok"Forwarding an SMS1. "Menu"2. "Text messag."3. "Ok"4. Select "Inbox" or "Outbox".5. Select SMS and confirm with "Ok".6. "Options"7. Select "Forward" and change text if re‐quired.8. "Options"9. Select "Send" and confirm with "Ok".SMS optionsQuery memory status Symbol indicates that there is no morememory capacity available for SMSs.Delete, see page 216, stored text messages.1. "Menu"2. "Text messag."3. "Ok"4. "Settings"5. "Ok"6. "Memory capacity"7. "Ok"The number of occupied and free memoryslots is displayed.Automatic status reportShow free memory when sending an SMS.1. "Menu"2. "Text messag."3. "Ok"4. "Settings"5. "Ok"6. "Status report"7. "Ok"Transfer durationDuration of attempts to send an SMS.1. "Menu"2. "Text messag."3. "Ok"4. "Settings"5. "Ok"6. "Validity"7. Select a period of time.8. "Ok"LanguageSet the language for the SMS.1. "Menu"2. "Text messag."3. "Ok"4. "New text msg"5. "Ok"6. "Input language"7. "Ok"8. Select the language.9. "Ok"Calls with a number of participantsCall waitingIf there is a second call during an ongoing call,you hear a call waiting signal.Choose between "Answer" or "Reject".Initiating another call1. "Options"2. "Hold"3. "Back"4. Select an entry from the telephone book ordial the phone number of the subscriber.Switching between two calls,alternating1. "Options"2. "Switch"Seite 217217Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
Telephone conferenceMerge two calls to set up a conference.1. "Options"2. "Conference"Terminating a callCurrent call by means of "End call"All calls:1. "Options"2. "End call"Second call with alternating:1. "Options"2. "Switch"3. "End call"Conference call:1. "Options"2. "Conf. participants"3. Select the call.4. "End active call"SettingsTelephoneCalling up the menu1. "Menu"2. "Settings"3. "Ok"Transferring your own phone numberDisplay the phone number at the called party.Other information from the service provider, seepage 222.In the "Settings" menu:1. "Call options"2. "Ok"3. "Transmit caller ID"4. "Ok"5. "Activate", "Deactivate" or "Network-depend."Setting call waitingAcoustic signal for a call during another call.In the "Settings" menu:1. "Call options"2. "Ok"3. "Call waiting"4. "Ok"5. "Activate" or "Deactivate"6. "Ok"Selecting the menu languageOptions: German, English, French, Italian, Span‐ish, Portuguese or Chinese.In the "Settings" menu:1. "Telephone"2. "Ok"3. "Language"4. "Ok"5. "Menu language" or "Input language"6. "Ok"7. Select the language.8. "Ok"Resetting the languageSet the English language.1. Press the button.2. Press the button on the right below the dis‐play.3. Press the arrow button downwards threetimes.4. Press the right-hand arrow once.5. Press the arrow button downwards once.6. Press the right-hand arrow once.7. Press the arrow button downwards threetimes.8. Press the right-hand arrow once.9. Select the language and confirm with "Ok".Seite 218218Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone in the rear
Deleting the call list1. "Menu"2. "Last calls"3. "Ok"4. "Delete"5. "Ok"6. Select "All calls" or select an entry.7. "Ok"8. "Yes"Call acceptance on lifting handsetThe call is accepted when you lift the handsetfrom the cradle.In the "Settings" menu:1. "Call options"2. "Ok"3. "Answer on eject"4. "Ok"Ring tone volumeIn the "Settings" menu:1. "Telephone"2. "Ok"3. "Ring tone vol. SIA"4. "Ok"5. Make the setting.6. "Ok"Brightness and lighting durationMake the setting for the display.In the "Settings" menu:1. "Telephone"2. "Ok"3. "Brightness" or "Backlight durat."4. Make the settings.5. "Ok"Key lockLocks the keypad automatically if no key hasbeen pressed for a certain time.Protection against inadvertent operation of thekeys.In the "Settings" menu:1. "Telephone"2. "Ok"3. "Autom. keylock"4. "Ok"Cancelling the key lockFollow the instructions on the display of thehandset.Restoring the factory settingsOverview of factory settings, see page 221.The handset is reset to default values. This doesnot affect the SIM card and network settings.In the "Settings" menu:1. "Telephone"2. "Ok"3. "Default settings"4. "Ok"5. "Yes"Network selectionPrincipleOn older SIM cards, it might be necessary to en‐able roaming.Roaming enables you to log into other tele‐phone networks abroad. Other information fromthe service provider, see page 222.Automatic or manual network selectionWith automatic network selection, the handsetlogs into an available network.With manual network selection, an available net‐work can be selected. If the handset is loggedinto another network, a triangle is shown on thedisplay.To set the type of network selection:1. "Menu"2. "Settings"Seite 219219Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
3. "Ok"4. "Network selection"5. "Ok"6. "Automatic" or "Manual"7. "Ok"Manual network selection1. "Menu"2. "Settings"3. "Netw. select."4. "Select network"5. Select a network.6. "Ok"Authorisation and securityEnabling/disabling the PIN querySuppressing the PIN queryIf the PIN query is disabled, your SIM cardis not protected against misuse.◀1. "Menu"2. "Settings"3. "Ok"4. "Security"5. "Ok"6. "PIN query" Confirm with "Ok".7. "Activate" or "Deactivate"8. "Ok"9. Enter the PIN and confirm with "Ok".Changing the PINIf the PIN query is activated.1. "Menu"2. "Settings"3. "Ok"4. "Security"5. "Ok"6. "Change PIN"7. "Ok"8. Enter the current PIN and confirm with"Ok".9. Enter the new PIN twice and confirm with"Ok".Unblocking SIM cardIf the incorrect PIN is entered three times, theSIM card is blocked."Please enter PUK:" is shown on the display.The PIN Unblocking Key (PUK) or Super PIN isrequired. This can only be entered on the hand‐set.Other information from the service provider,see page 222.After entering the PUK, assign a new PIN, seepage 220.Barring callsPrincipleThese functions are protected with a passwordagainst unauthorised use. Other informationfrom the service provider, see page 222.Calling up the menu1. "Menu"2. "Settings"3. "Ok"4. "Security"5. "Ok"6. "Call barring"7. "Ok"Outgoing callsOutgoing calls can be suppressed:▷All except for emergency call.▷All international calls.▷All international calls except home country.1. "Call barring"2. "Ok"3. "All calls", "International calls" or "Int. exc.homectry"4. "Ok"Seite 220220Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone in the rear
5. "Activate", "Deactivate" or "Status"6. Enter your password.7. "Ok"Incoming callsIncoming calls can be suppressed:▷All calls.▷All international calls.1. "Incoming calls"2. "Ok"3. "All calls", "Int'l calls"4. "Ok"5. Enter your password.6. "Ok"Cancelling all barrings1. "Menu"2. "Settings"3. "Ok"4. "Security"5. "Ok"6. "Call barring"7. "Ok"8. "Deactivate all"9. Enter the password and confirm with "Ok".Factory settingsIf you reset the handset to the factory settings,the following settings are made.Setting Factory settingPhone book The telephone book isdeletedDisplay of the tele‐phone bookBothSaving text mes‐sages automaticallySwitched offTransfer duration oftext messagesMaximumSetting Factory settingStatus report for textmessagesSwitched offKey lock Switched offBrightness 3Lighting duration 3Language EnglishBluetooth name GSM SIA BMWCall acceptance forhandsetSwitched onPrivate telephonebookSwitched offRing tone volume 4Logging in the snap-inadapter*PrinciplePair the snap-in adapter with the vehicle. Thetelephone book is shown on the display and thehands-free system at the front can be used.Requirement▷The snap-in adapter is inserted in the centrearmrest.▷The ignition is switched on.▷The SIM card is inserted in the snap-inadapter or the SIM Access Profile (SAP) isactive.▷The Bluetooth passkey, see page 222, onthe back of the snap-in adapter is known.Logging the snap-in adapter in to thevehicleActivate the Bluetooth connection, seepage 203, in the vehicle. Up to four devices, in‐cluding the handset, can be connected.1. In the main menu, select the entry"Telephone".Seite 221221Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
2. "Bluetooth". All logged-in mobile phonesare listed.3. Call up "Options".4. "Bluetooth"5. Press the button on the handset forapprox. 3 seconds.The LED above the button lights up green.Logging in the handsetPrincipleTo be able to use the handset, it must be con‐nected to the snap-in adapter. The handset isalready connected at the factory. The connec‐tion is set up automatically each time the hand‐set is switched on.Requirement▷The snap-in adapter is inserted in the centrearmrest.▷The ignition is switched on.▷The SIM card is inserted in the snap-inadapter.▷The Bluetooth passkey, see page 222, onthe back of the snap-in adapter is known.Connecting the handset1. Press the button for approx. 9 sec‐onds.The LED above the button lights up orange.2. Switch on the handset.3. "GSM-SIA"4. "Ok"5. GSM SIA BMW6. "Ok"7. Enter the Bluetooth passkey.8. "Ok"9. The connection to the snap-in adapter is es‐tablished.Bluetooth passkeyThe Bluetooth passkey is locatedon the back of the snap-inadapter.To read the passkey, remove thesnap-in adapter, see page 211.The number behind the PIN line is the Bluetoothpasskey and can be changed to a desired PIN.Changing the Bluetooth passkey1. "Menu"2. "Settings"3. "Bluetooth"4. "Ok"5. "Change Passkey"6. "Ok"7. Enter a new password.8. "Ok"Resetting the Bluetooth passkey anddeleting all pairingsPress the button for approx. 12 sec‐onds. The LED above the button lightsup red.Service providerThese functions depend on your service pro‐vider and contract.If you have any other questions, contact theservice provider directly.Seite 222222Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGTelephone in the rear
ContactsGeneralContacts can be created and edited. The con‐tacts from the mobile phone* and the BMW On‐line address book* are also displayed. The ad‐dresses can be used as navigation destinationsand the phone numbers dialled directly.New contact1. "Contacts"2. "New contact"3. If the input fields are still filled with the pre‐vious inputs, select "Clear fields".4. To complete the input fields: select the sym‐bol beside the input field.5. Enter text, see page 22.6. For navigation system Entering an address.Only addresses that are present in the car'snavigation data can be entered. This en‐sures that route guidance is possible for alladdresses.7. If necessary, "Save".8. "Save contact in car"Defining a contact as home addressA contact can be stored as your home address.In "My contacts", this is in the first position.1. Create a new contact.2. Call up "Options".3. "Save as home address"My contactsGeneralList of all contacts from the vehicle, the mobilephone and the BMW Online address book*.Displaying contacts1. "My contacts"All contacts are listed in alphabetical order. Withmore than 30 contacts, the A-Z search is of‐fered, see page 22.A symbol indicates the storage location of thecontacts:Seite 223223Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
Symbol Storage locationNo symbol In the vehicle, address notchecked as destination In the vehicle, address checked asdestination*. Mobile phone* BMW Online address book*Showing detailed viewSelect the desired contact.All completed fields of the contact are displayed.Displaying contacts from BMW Online*To display contacts from BMW Online, at thelogin, see page 228, to BMW Online the func‐tion "Login automatically" must be enabled.Displaying additional information fromBMW Online*Display of additional information for a contact ifpresent at BMW Online.1. Select the desired contact.2. Call up "Options".3. "Info available BMW Online"Selecting a contact as navigationdestination*1. "My contacts"2. Select the desired contact.3. Select the desired address.In the case of contacts from the mobile phoneand BMW Online address book*, the addressmight have to be matched to the navigation datain the vehicle. If that is the case:Correct the address.Checking address as destination*An address that is to be adopted into the routeguidance must match the navigation data con‐tained in the vehicle. Here, the address can bechecked.1. Select the desired contact and highlight theaddress.2. Call up "Options".3. "Check as destination"4. If necessary, correct and save the address.If the address is corrected and stored, a copy iscreated in the vehicle. The address is notchanged on the mobile phone or at BMW On‐line*.Dialling phone number*1. "My contacts"2. Select the desired contact.3. Select the desired phone number.The connection is established.Editing contacts1. "My contacts"2. Select the desired contact.3. "Edit contact"4. Change entries.5. Tilt the controller to the left.6. "Yes"If a contact that comes from the mobile phone*or BMW Online* is edited, the changes are notstored on the mobile phone or at BMW Online*.A copy of the entry is stored in the vehicle andonly the copy is displayed.Deleting contactsOnly contacts stored in the vehicle are deleted.The contacts from the mobile phone* or BMWOnline* cannot be deleted.Seite 224224Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGContacts
1. "My contacts"2. Highlight the contact.3. Call up "Options".4. "Delete contact" or "Delete all contacts"Exporting/importing contactsContacts can be exported and imported via Per‐sonal Profile, see page 31.Seite 225225Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
BMW ServicesBMW Assist*GeneralBMW Assist provides certain services, e.g. aninformation service.The exact offering is country-specific. YourService Centre will be glad to answer any ques‐tions you might have.BMW Assist can also be used via the Internet,where other services are available:www.bmw.comDuring a connection to BMW Assist, it might bethat no telephone connection can be estab‐lished via the mobile phone. If the mobile phoneis to be used, log it out from the vehicle.BMW TeleServices*GeneralBMW TeleServices supports communicationwith the Service Centre.▷Data regarding the service requirement ofthe vehicle can be transferred directly toBMW Service. This enables BMW Service toprepare for the necessary work in advance.The workshop stay is shortened.▷In the event of a breakdown, data regardingthe condition of the vehicle can be transfer‐red to Roadside Assistance. It might be thatmalfunctions can be remedied directly.▷The offering is country-specific.▷Connection charges can be incurred.▷Services can be limited abroad.Requirements▷BMW Assist is activated. If BMW Assist isnot enabled, the selected mobile communi‐cations network must support CircuitSwitched Data, CSD, phone number trans‐fer must be enabled and a mobile phonerecommended by BMW for TeleServicesmust be connected to the vehicle.▷In the case of a mobile phone with UMTScapability: data transfer is switched to solelyGSM data transfer.▷The SIM card is enabled for free servicenumbers.▷There is mobile radio communications re‐ception.▷Engine is running.Information service*GeneralInformation regarding e.g. hotels, emergencychemists etc., phone numbers and addressescan be sent to the vehicle and called directly oradopted as destinations into the navigation sys‐tem*.Starting the information service1. "BMW Services"2. "Info plus"3. "Start service"A voice connection to the BMW informationservice is established. Phone numbers and ad‐dresses can be transferred as messages.Call up the message via the message list, seepage 207.Seite 226226Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGBMW Services
Breakdown recoveryOverviewIt is possible to make contact with Roadside As‐sistance* of the BMW Group if you require helpin the event of a breakdown.Starting Roadside AssistanceEquipment without BMW Assist orBMW TeleServices1. "BMW Services"2. "BMW Mobile Care"The number of Roadside Assistance is dis‐played. If a mobile phone* is logged on, aconnection to BMW Roadside Assistance isestablished.Equipment with BMW Assist or BMWTeleServices1. "BMW Services"2. "BMW Mobile Care"3. "Start service"BMW TeleServices Diagnosis*BMW TeleServices Diagnosis enables transferof detailed vehicle data that are necessary fordiagnosis of the vehicle via mobile telephony.These data are transferred automatically.After transfer of the data, a voice connection toRoadside Assistance is established.BMW TeleServices Help*BMW TeleServices Help enables a more de‐tailed diagnosis of the vehicle by Roadside As‐sistance per mobile telephony.Following the request by Roadside Assistanceand after breaking the voice connection, the Tel‐eServices Help can be started.Starting BMW TeleServices Help1. Park the vehicle safely.2. Apply the parking brake.3. Engine running.4. "Teleservice Help"After completion of the TeleServices Help, avoice connection to Roadside Assistance is es‐tablished.Activating BMW Assist*GeneralIf you have a valid BMW Assist contract and theservices are not displayed, these might have tobe activated.Activating1. Ensure that the vehicle is able to determineits location. As a rule, this is possible out‐doors under a clear sky.2. Switch on the ignition.3. "Activate Assist"The activation can take a few minutes. If you callup another menu, the activation continues to runin the background.Seite 227227Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
BMW Online*OverviewBMW Online is an online portal that provides youwith certain in-car services, e.g. information onweather forecasts, current news, share prices,access to e-mails and a personal address book.Licensing termsThis product contains NetFront Browser soft‐ware of ACCESS Co., Ltd. Copyright (c) 2007ACCESS Co., Ltd. All rights reserved.NetFront is a trade mark or registered trade markof ACCESS Co., Ltd. in Japanese version and inother countries.This software is based in part on the work of theIndependent JPEG Group.Requirements▷You have registered for BMW Online withyour Service Centre.▷A mobile communications network must beavailable.▷For certain services, e.g. information on cur‐rent location, the vehicle must be able to de‐termine your current location.▷The correct date is set, see page 77, on thecontrol display.Starting BMW Online1. "BMW Services"2. "BMW Online"3. If applicable, "OK".The BMW Online start page is displayed.Using BMW OnlineTo select and display content:▷Turn the controller to highlight an element.▷Press the controller to display an element.Calling up the home page1. Call up "Options".2. "Start page"Reloading a page1. Call up "Options".2. "Reload"Cancel1. Call up "Options".2. "Cancel loading"LoginTo display contacts of BMW Online or other per‐sonal data, a login is required.1. "BMW Services"2. "BMW Online"3. Call up "Options".4. "User login"Seite 228228Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGBMW Services
5. "User name:"6. Enter your user name and select "OK".7. "Password"8. Enter your password.9. "OK"Automatic loginThe login takes place automatically when BMWOnline is called up."Login automatically"Logging off1. "BMW Services"2. "BMW Online"3. Call up "Options".4. "User logoff"Internet*Calling up the Internet1. "BMW Services"2. "Internet"3. If applicable, "OK".The home page is displayed. It is possible thatthe Internet sites are not displayed in the sameway as on a PC. Flash or Java applications mightbe displayed incorrectly.Licensing termsThis product contains NetFront Browser soft‐ware of ACCESS Co., Ltd. Copyright (c) 2007ACCESS Co., Ltd. All rights reserved.NetFront is a trade mark or registered trade markof ACCESS Co., Ltd. in Japanese version and inother countries.This software is based in part on the work of theIndependent JPEG Group.Operating the InternetMenu barA menu bar for operation is displayed. To acti‐vate the menu bar, tilt the controller to the leftuntil the cursor is located in the menu bar.Symbol Function Activate mouse pointer Call up home page Refresh, reload Cancel Back Enter URL Bookmarks/favourites Zoom Close the browserNavigating with the mouse pointer1. Select the symbol.2. Navigate to page with mouse pointer.▷To move the mouse pointer: tilt control‐ler in the corresponding direction.▷To move the mouse pointer diagonally:tilt controller in the corresponding direc‐tion and turn the controller.Seite 229229Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
▷To select an element: move the mousepointer onto the element and press thecontroller.▷To scroll: turn the controller.Status displayA symbol in the top left on the screen indicatesthe following status:Symbol Meaning No connection possible Data transfer/connection Secure connectionEntering Internet addresses1. Select the symbol.2. Enter the address and select "OK".Bookmarks/favouritesAdding bookmarksThe currently displayed page is stored as abookmark.1. Select the symbol.2. "Add to bookmarks"Select bookmark1. Select the symbol.2. Select the desired bookmark.Deleting bookmarks1. Select the symbol.2. Highlight the bookmark to be deleted.3. Call up "Options".4. "Delete bookmark" or "Delete allbookmarks"Specifying a bookmark as home page1. Select the symbol.2. Highlight the desired bookmark.3. Call up "Options".4. "Set as start page"SettingsSuppressing cookies1. Call up "Options".2. "Suppress cookies"Suppressing pop-ups1. Call up "Options".2. "Suppress pop-ups"Suppressing security warnings1. Call up "Options".2. "Suppress HTTPS pop-ups"Seite 230230Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGBMW Services
BMW TeleServices*Activating BMW TeleServicesBMW TeleServices must have been enabled inthe vehicle before they can be used. This is usu‐ally already done by your BMW Service partner."BMW TeleServices"HotlineOverviewContact the BMW Hotline for information cov‐ering every aspect of the vehicle.Calling the hotlineEquipment without BMW Assist orBMW TeleServices1. "BMW Services"2. "Hotline"The telephone number of the hotline is dis‐played. If a mobile phone* is logged on, a con‐nection to the hotline is established.Equipment with BMW Assist or BMWTeleServices1. "BMW Services"2. "Hotline"3. "Start service"TeleServices Call*OverviewSends information to your Service Partner indi‐cating that a service appointment is to beagreed. The TeleServices data are transferred.Your Service Partner will establish contact withyou.Starting a TeleServices Call1. "BMW Services"2. "Teleservice Call"3. "Start service"Automatic TeleServices call*The TeleServices data on the service require‐ment for the vehicle are transmitted to yourService Partner automatically when a service isdue. The partner will make contact and a serviceappointment can be agreed.Checking when the your service partner was no‐tified:1. "Vehicle information"2. "Vehicle status"3. "Options"Seite 231231Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview
4. "Last Teleservice Call"Service partners*Address and contact data of the BMW Servicepartner.Displaying BMW Service partners1. "BMW Services"2. "Your BMW Dealer"Data transfer*The status of the data transfer is displayed.1. "BMW Services"2. "Data transfer"Service status*Display available servicesDisplay of all services available in the vehicle.1. "BMW Services"2. "Service status"3. "Available services"Activating BMW AssistIf you have a valid Assist contract and the serv‐ices are not displayed, these might have to beactivated."Activate Assist"Updating BMW AssistThe Assist offering can be changed or extended.In this case, update the services."Update Assist"Enabling BMW TeleServicesBMW TeleServices might have to be enabled inthe vehicle."Activate TeleServices"Updating BMW TeleServicesThe BMW TeleServices offering can bechanged or extended. In this case, update theservices."Update TeleServices"Deactivating BMW TeleServicesIf BMW TeleServices are disabled, it is still pos‐sible to set up a voice connection to RoadsideAssistance."Deactivate TeleServices"Seite 232232Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AGBMW Services
Extended BMW Online servicesGeneralThe extended BMW Online services providesscope for exchanges of information and datawith the vehicle via BMW Online.The following section lists the functions of theextended BMW Online services.Navigation▷ Importing trips, see page 155.▷ Information on points of interest from BMWOnline, see page 151.▷ Displaying current traffic regulations andcountry information, see page 160.CD/Multimedia▷ Updating album information, see page 180.Personal Profile▷ Exporting/importing a user profile, seepage 32.BMW Online and Internet▷ BMW Online, see page 228.▷ Internet, see page 229.Seite 233233Online Version für Sach Nr. 01 41 2 602 033 - © 03 09 510 BMW AG Reference Mobility Communication Entertainment Navigation Driving hints Controls Overview

Navigation menu