Harman Becker Automotive Systems MULF2 Bluetooth Handsfree Carkit User Manual 08

Harman Becker Automotive Systems Bluetooth Handsfree Carkit 08

08 user manual

Harman/Becker reserves the copyright to this document. It must not be copied, communicated or made available to third parties without the written authorisation of Harman/Becker Department EDH Date Name Drawn MULF2 Check Certification Rel. QME Page Harman/Becker Installation instruction 1 01 21.03.06 Schneid Automotive Systems of 55Rev. Change / Note Date Name File Installation Printed. 21.03.06 MULF2 Certification Installation instruction
Harman/Becker reserves the copyright to this document. It must not be copied, communicated or made available to third parties without the written authorisation of Harman/Becker Page 2 - EDHRevision 01 vom 21.03.06 of Installation instruction_MULF2.doc 5 Printed: 21.03.06 Inhaltsverzeichnis 1 Abstract ........................................................................................................................... 3 1.1 Revision index............................................................................................................ 3 1.2 Applicable documents................................................................................................ 3 1.3 Abbreviations ............................................................................................................. 4 1.4 Purpose of the document........................................................................................... 5 2 General............................................................................................................................. 5 3 Power supply................................................................................................................... 5 4 Antenna............................................................................................................................ 5 5 FCC note.......................................................................................................................... 5
MULF2 Certification Installation instruction Harman/Becker reserves the copyright to this document. It must not be copied, communicated or made available to third parties without the written authorisation of Harman/Becker Page 3 - EDHRevision 01 vom 21.03.06 of Installation instruction_MULF2.doc 5 Printed: 21.03.06 1 Abstract 1.1 Revision index No. State Version Change Description Changed pages Autor 1 ready 1.0 All Schneider 1.2 Applicable documents Ref. State Version Document Description Autor
MULF2 Certification Installation instruction Harman/Becker reserves the copyright to this document. It must not be copied, communicated or made available to third parties without the written authorisation of Harman/Becker Page 4 - EDHRevision 01 vom 21.03.06 of Installation instruction_MULF2.doc 5 Printed: 21.03.06 1.3 Abbreviations Document Description BT Bluetooth EC Echo cancellation NR Noise reduction
MULF2 Certification Installation instruction Harman/Becker reserves the copyright to this document. It must not be copied, communicated or made available to third parties without the written authorisation of Harman/Becker Page 5 - EDHRevision 01 vom 21.03.06 of Installation instruction_MULF2.doc 5 Printed: 21.03.06 1.4 Purpose of the document Installation instruction for the MULF2. 2 General The MULF2 is not sold direct to the customer. The MULF2 will be delivered directly to the car manufacturer. MULF2 is manufactured for BMW AG. BMW AG is responsible for the correct installation of the MULF2. This document is a guide for the correct installation of the MULF2. 3 Power supply Normal operation voltage of the MULF2 is 9V – 16V. The nominal supply current of the MULF2 is 180 mA at 14V. The MULF2 may only be operated on a fused power supply. The recommended fuse is a 10A Type. 4 Antenna The MULF2 has an external antenna connector. The connector is a FAKRA type. Only the following antenna should be connected to the MULF2: • 6 928 461 (BMW part number) This antenna has a gain of 2,1 dBi. It is possible, to connect the antenna via a coax cable. 5 FCC note In the user manual should be the following text: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu