Harman Kardon 950 0321 001 Users Manual

8095db67-f38b-42bf-8.. 8095db67-f38b-42bf-8c5b-04df4169f804

950-0321-001 to the manual 8095db67-f38b-42bf-8c5b-04df4169f804

2015-01-25

: Harman-Kardon Harman-Kardon-950-0321-001-Users-Manual-235758 harman-kardon-950-0321-001-users-manual-235758 harman-kardon pdf

Open the PDF directly: View PDF .
Page Count: 38

BDS

Integrated home theater system

Owner’s Manual

ENGLISH

BDS

Table of Contents

INTRODUCTION 3

VERIFY LINE VOLTAGE BEFORE USING 3

UNPACKING 3

INSTALLATION LOCATION 3

CLEANING 3

MOVING THE RECEIVER 3

SYSTEM COMPONENTS 4

SUPPLIED ACCESSORIES 4

RECEIVER FRONTPANEL CONTROLS 5

RECEIVER REARPANEL CONNECTIONS 6

SUBWOOFER CONTROLS AND CONNECTIONS 7

REMOTE CONTROL FUNCTIONS 8

PLACING THE SPEAKERS

BDS 800, BDS 700, BDS 400 AND BDS 300 SYSTEMS 10

PLACING THE SPEAKERS BDS 600 SYSTEM 11

MOUNTING OPTIONS FOR SATELLITE AND CENTER SPEAKERS 11

CONNECTIONS 14

PREPARING THE REMOTE CONTROL 18

SETTING UP THE RECEIVER 19

USING THE RECEIVER 23

USING THE DISC PLAYER 24

LISTENING TO YOUR IPOD/IPHONE 26

USING THE RADIO 26

LISTENING TO AUDIO SOURCES 27

PLAYING FILES FROM USB DEVICES AND CD DATA DISCS 27

USING PLAYLISTS 29

TROUBLESHOOTING 30

AUX COMPONENT REMOTECONTROL CODE LIST 31

SPECIFICATIONS 36

BDS

ENGLISH

Verify Line Voltage Before Using, Unpacking, Installation Location,

Cleaning, Moving the Receiver and Introduction

Introduction

Please register your product on our Web site at www.harmankardon.com.

Note: You’ll need the product’s serial number. At the same time, you can choose to be

notified about our new products and/or special promotions.

Thank You for Choosing Harman Kardon® Products!

In the years since harman kardon engineers invented the high-fidelity receiver, we have

taken to heart this philosophy: Bringing the joy of home entertainment to as many people

as possible, adding performance and ease-of-use features that enhance the experience. The

BDS series of home entertainment systems offers a complete home entertainment solution

with a wealth of listening and viewing options in one sleek receiver. Each BDS series system

also includes a 5.1-channel, 2.1-channel or soundbar loudspeaker system, a system remote

control and all the cables and accessories you need to enjoy movies and music in your own

home, when you use them with your television or video display.

To get the maximum enjoyment from your new BDS system, we urge you to read this manual

thoroughly and refer back to it as you become more familiar with your new system’s features

and their operation.

If you have any questions about this product, its installation or its operation, please contact

your retailer or custom installer, or visit the Harman Kardon Web site at

www.harmankardon.com.

Verify Line Voltage Before Using

Your BDS receiver has been designed for use with 110 – 240-volt, 50Hz/60Hz AC current. Your

subwoofer has been designed for use with either 120-volt, 60Hz or 220 – 240-volt, 50/60Hz

AC current, depending on where your system was sold. The receiver includes a detachable IEC

power cable designed for use in the region where the system is sold.

Connection to a line voltage other than that for which the units are intended can create

a safety and fire hazard and may damage the units. If you have any questions about the

voltage requirements for your specific model or about the line voltage in your area, contact

your dealer before plugging the unit into a wall outlet.

Unpacking

The carton and shipping materials used to protect your new receiver during shipment were

specially designed to cushion it from shock and vibration. We suggest that you save the

carton and packing materials for use in shipping if you move or if the unit ever needs repair.

To minimize the size of the carton in storage, you may wish to flatten it. You can do it by

carefully slitting the tape seams on the carton’s bottom and collapsing it. You can store

cardboard inserts in the same manner. Packing materials that cannot be collapsed should be

saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and other

sections of the shipping-protection materials are recyclable. Please respect the environment

and discard those materials at a local recycling center.

Remove the protective plastic film from the front-panel lens. Leaving the film in place will

affect the performance of your remote control.

Installation Location

To ensure proper operation and to avoid the potential for safety hazards, place the unit

on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and

any mounting hardware can support the weight of the product.

Provide proper space both above and below the unit for ventilation. If this product will

be installed in a cabinet or other enclosed area, make certain that there is sufficient air

movement within the area. Under some circumstances, a fan may be required.

Do not place the unit directly on a carpeted surface.

Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct

sunlight or heating equipment.

Avoid moist or humid locations.

Do not obstruct the ventilation slots on the top and sides of the unit or place objects

directly over or next to them.

Do not place the

receiver directly on top of a product that generates excessive heat.

Due to the heat generated by the

receiver and other components in your system, there is

the remote possibility that the rubber padding on the bottom of the unit’s feet may leave

marks on certain wood or wood-veneer materials. Use caution when placing the unit

on soft woods or other materials that heat or heavy objects may damage. Some surface

finishes may be particularly sensitive to absorbing such marks, due to a variety of factors

beyond harman kardon control, including the nature of the finish, cleaning materials

used, normal heat and vibration caused by the use of the product, or other factors. Your

warranty will not cover this type of damage to furniture, so exercise caution in choosing

an installation location for the component and in performing normal maintenance

practices.

Your new

harman kardon Blu-ray Disc™ player requires a broadband Internet connection

for BD-Live™ interactivity.

Cleaning

receiver

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only after

unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy water,

then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth. NEVER use

benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use

abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide

near the unit.

Speakers and Subwoofer

When needed, use a soft cloth to remove any fingerprints or dust from the enclosures or

grilles. NOTE: Do not use any cleaning products or polishes on the enclosures or grilles.

Moving the Receiver

Before moving the receiver, disconnect any interconnection cords to other components, and

disconnect the unit from its AC outlet.

NOTE: The built-in Blu-ray Disc/DVD player in your BDS receiver is designed and

manufactured for compatibility with region management information that is encoded on

most Blu-ray Disc recordings and DVD recordings:

BDS receivers sold in the USA

are designed only for playback of discs with Blu-

Ray Disc Region Code A and DVD Region Code 1 information, or for discs that do not

contain any region code information.

BDS receivers sold in Europe

are designed only for playback of discs with Blu-ray

Disc Region Code B and DVD Region Code 2 information, or for discs that do not

contain region code information.

If there is a Region Code on a disc other than the one your BDS player is designed for, it

will not play in your BDS receiver.

BDS

System Components and Supplied Accessories

System Components

Your BDS system includes the following components:

BDS 800 System

1 x BDS 5 5.1-channel Blu-ray Disc receiver

4 x SAT-TS60 satellite speakers

1 x SAT-TS60 center speaker

1 x HKTS200SUB powered subwoofer

BDS 700 System

1 x BDS 5 5.1-channel Blu-ray Disc receiver

4 x SAT-TS7 satellite speakers

1 x CEN-TS7 center speaker

1 x HKTS200SUB powered subwoofer

BDS 600 System

1 x BDS 5 5.1-channel Blu-ray Disc receiver

1 x SB10 soundbar speaker

1 x HKTS210SUB powered subwoofer

BDS 400 System

1 x BDS 2 2.1-channel Blu-ray Disc receiver

2 x SAT-TS60 satellite speakers

1 x HKTS200SUB powered subwoofer

BDS 300 System

1 x BDS 2 2.1-channel Blu-ray Disc receiver

2 x SAT-TS11 satellite speakers

1 x HKTS200SUB powered subwoofer

Supplied Accessories

If any of these items are missing, please contact harman kardon Customer Service via www.

harmankardon.com.

System remote

control

System remote

control

System remote

control

HDMI™ cable

FM wire antenna

Satellite speaker wall-mount brackets

(four with BDS 800 system, two with

BDS 400 system)

Metal stop plates and screws for

satellite speaker wall-mount brackets

(four with BDS 800 system, two with

BDS 400 system)

Center speaker wall-mount bracket

(BDS 800 system only)

Center speaker wall-mount bracket

(BDS 700 system only)

Two 5-meter (16.4-foot) speaker cables – red and

white color bands

Two 5-meter (16.4-foot) speaker cables – red and

white color bands

One 4-meter (13.1-foot) speaker cable for

center speaker – green color band (BDS 800

system only)

One 4-meter (13.1-foot) speaker cable for

center speaker – green color band (BDS 700

system only)

Two 10-meter (32.8-foot) speaker cables for rear satellites –

gray and blue color bands (BDS 800 system only)

Two 10-meter (32.8-foot) speaker cables for rear satellites –

gray and blue color bands (BDS 700 system only)

One mono RCA audio cable for connection to the

subwoofer – purple connectors

One mono RCA audio cable for connection to the

subwoofer – purple connectors

One mono RCA audio cable for connection to the

subwoofer – purple connectors

Satellite speaker wall-mount brackets

and hardware (four with BDS 700

system, two with BDS 300 system)

Three speaker cables

Two soundbar wall-mount

brackets

Two rubber feet

BDS 800, BDS 400 Systems

BDS 700, BDS 300 Systems

BDS 600 System

BDS

ENGLISH

Receiver Front-Panel Controls

Disc Slot: Insert a compatible disc into the slot. The BDS receiver’s disc player will accept

5-inch (12cm) and 3-inch (8cm) discs.

Information Display: Various messages appear on this display in response to commands

and to show the audio/video that is playing, the settings or other aspects of the BDS receiver’s

status as described throughout this manual.

Eject Button (on top of unit): Press this button to eject a disc from the BDS receiver’s

built-in disc player. Before pressing this button, make sure no objects are blocking the

disc-slot opening. NOTE: If you do not remove the ejected disc within 90 seconds, it will

automatically re-load back into the disc player for protection.

Standby Button (on top of unit): This button toggles the receiver between the On and

Standby modes.

Power Indicator: This LED surrounds the Standby button. When the BDS receiver is

plugged into AC power, the LED turns amber to indicate that the receiver is in Standby mode

(ready to be turned on). When you turn the BDS receiver on (by the Standby button or the

remote control’s Power button), the LED turns white.

Headphone Jack: Insert the 3.5mm stereo mini connector from a set of headphones into

this jack. NOTE: When a plug is inserted into the Headphone jack, the BDS receiver’s speaker

outputs automatically mute; the HDMI audio output remains active.

Volume Control: Rotate the disc clockwise to raise the volume; rotate counterclockwise

to lower the volume. The volume level will appear on the Information Display and on the

on-screen menu.

IMPORTANT: Do not turn the receiver’s Volume control up to or past the point where the audio

from the speakers becomes distorted. Doing so can damage the speakers.

USB 2.0 Port: Gently insert a flash drive or HDD disk drive with a USB Standard-A cable to

this port.

IMPORTANT: Do not connect a PC or other USB host/controller to this port, or

you may damage both the BDS receiver and the other device.

Orient the device’s plug so it fits all the way into the BDS receiver’s USB connector. You may

insert or remove the device at any time – there is no installation or ejection procedure.

Receiver Front-Panel Controls

Disc Slot Information Display

Headphone Jack

Volume Control

Eject Button (on top panel) Standby Button (on top panel)

USB Port

BDS

Receiver Rear-Panel Connections

NOTE: See the Connections section, on page 14, for detailed information about making

connections.

AC Power Connector: After you have made and verified all other connections, plug the

supplied AC power cord into this input and into an unswitched AC outlet.

Main Power Switch: This mechanical switch turns the BDS receiver’s power supply on or

off. After you have made and verified all connections (see the Connections section, on page

14), set this switch in the On position. During normal use you will usually leave this switch set

to On; it cannot be turned on or off using the remote control. To conserve energy when you’re

not going to be using the receiver for an extended period of time, set this switch to Off.

Speaker Connectors: Use the speaker wires supplied with the speakers to connect the

satellite and center speakers to the proper terminals.

The

BDS 5 receiver (shown) has connections for five speakers: front left, front right,

surround left, surround right and center.

The

BDS 2 receiver (not shown) has connections for two speakers: front left and front

right.

See Connections, on page 14, for more information.

Subwoofer Output: Use the supplied mono RCA audio cable (with the purple connectors)

to connect this jack to the subwoofer’s Line-Level In LFE jack. See Connecting the Subwoofer,

on page 16, for more details about making connections.

BD-Live Connector: To be able to use the BD-Live feature, connect this port to your local

area network (LAN) using a Cat. 5/Cat. 5e/RJ-45 network cable. See BD-Live Interactivity, on

page 26, for details.

Optical Digital Inputs: Connect the optical digital output of an audio-only source

component here. The signal may be a Dolby® Digital bitstream, a DTS® bitstream or a

standard PCM digital-audio bitstream.

NOTE: Use only one type of digital connection for each source component.

Coaxial Digital Input: Connect the coaxial digital output of an audio-only source

component here. The signal may be a Dolby Digital bitstream, a DTS bitstream or a standard

PCM digital-audio bitstream.

NOTE: Use only one type of digital connection for each source component.

HDMI Output (HDMI ver. 1.3a): Connect the BDS receiver’s HDMI output to your TV’s

HDMI input. Since the HDMI cable transmits both video and audio to the TV, we recommend

that you set the receiver’s HDMI audio output to Off in the receiver’s Audio menu to take full

advantage of your BDS system’s superior audio performance. See Audio Settings, on page 21,

for more information.

IMPORTANT: Your BDS receiver is in compliance with HDCP (High-Definition Copy Protection).

Your TV must also be HDCP-compliant to be used with the BDS receiver’s HDMI output. For

best results, we do not recommend HDMI connections in excess of ten feet (about 3 meters)

without a repeater. If your TV has a DVI input, you may use an optional HDMI-to-DVI cable or

adapter for the video connection to the TV. (The DVI connection is video-only.)

Analog Audio Inputs 1 and 2: Use these inputs to connect to an audio-only source

component (such as a tape deck). Do not connect a turntable to these jacks without a phono

preamp.

The Bridge IIIP Connector: Connect The Bridge IIIP iPod/iPhone dock (available

separately) to this terminal.

FM Antenna Connector: Connect the supplied FM antenna to this terminal.

Receiver Rear-Panel Connections

Main Power Switch Speaker Connectors (BDS 5 Shown)

AC Power Connector

BD-Live Connector HDMI Output FM Antenna Connector

Cooling Fan Air Exhaust Optical Digital

Inputs

Analog Audio

Inputs

The Bridge IIIP Connector

Subwoofer Output Coaxial Digital Input

BDS

PL0004-01001

ENGLISH

Subwoofer Controls and Connections

Phase Switch: This switch determines whether the subwoofer driver’s piston-like action

moves in and out in phase with the satellite speakers. If the subwoofer were to play out of

phase with the satellite speakers, the sound waves produced by the subwoofer could be

cancelled out, reducing bass performance and sonic impact. This phenomenon depends in

part on the relative placement of all the speakers in the room.

Although in most cases the Phase switch should be left in the “Normal” position, there is no

absolutely correct setting for it. When the subwoofer is properly in phase with the satellite

speakers, the sound will be clearer and have maximum impact. It will make percussive

sounds like drums, piano and plucked strings sound more lifelike. The best way to set the

Phase switch is to listen to music that you are familiar with and set the switch in the position

that gives drums and other percussive sounds maximum impact.

Bass-Boost Switch: Set this switch to “On” to enhance the subwoofer’s low-frequency

performance. Set this switch to “Off” for normal low-frequency performance.

Power-On Mode Switch: When this switch is set in the “Auto” position and when the

Power switch is set to “On,” the subwoofer will automatically turn itself on when it receives

an audio signal. It will enter the Standby mode if it receives no audio signal for 20 minutes.

When the Power-On Mode switch is set in the “On” position, the subwoofer will remain on

whether or not it is receiving an audio signal.

An LED on the subwoofer’s top panel indicates whether the subwoofer is in the On or Standby

mode:

When the LED glows

white, the subwoofer is turned on.

When the LED is not lit up, the subwoofer is in Standby mode.

When the Main Power Switch is set to Off, the LED will not light up, no matter what setting

the Power-On Mode switch is in.

Subwoofer Level Control: Use this control to adjust the subwoofer’s volume. Turn

clockwise to increase the volume; turn counterclockwise to decrease the volume.

External Trigger Input Connector: NOTE: This connector is NOT used with the

BDS receiver. If you connect the subwoofer to a different component that has a voltage

trigger output connection, connect the External Trigger Input to the trigger output of the

other compatible component. Whenever the subwoofer detects a trigger signal between 3V

and 30V (AC or DC), the subwoofer’s amplifier will turn on. The subwoofer’s amplifier will

turn off after the trigger signal ceases, even when the Power-On Mode switch is in the “Auto”

position.

Line-Level In LFE Connector: Use the supplied mono RCA audio cable (with the purple

connectors) to connect the Line-Level In LFE connector to the BDS receiver’s Subwoofer

output.

Line-Level In L/R Connectors: NOTE: These connectors are NOT used with the

BDS receiver. If you connect the subwoofer to a different unit that does not have a dedicated,

low-pass-filtered subwoofer output, use these connectors.

If the unit has a separate subwoofer output, use the supplied mono RCA audio cable to

connect the unit’s subwoofer output to either one of the subwoofer’s Line-Level In L/R

connectors.

If your unit does not have a separate subwoofer output, use two Y-adapters (not

supplied). Connect one adapter’s single end to the unit’s preamp output for that

channel. Connect one of this adapter’s dual ends to the main amp input for that channel,

and connect the adapter’s other dual end to one of the subwoofer’s Line-Level In L/R

connectors. Repeat this process with the other Y-adapter, preamp channel, main amp

input and subwoofer’s Line-Level In L/R connector.

Main Power Switch: Set this switch in the On position to turn the subwoofer on. The

subwoofer will then either be on or in Standby mode, depending on the setting of the

subwoofer’s Power-On Mode switch.

Power Cord: After you have made and verified all subwoofer and speaker connections

described in this manual, plug the Power cord into an active, unswitched electrical outlet for

proper operation of the subwoofer. DO NOT plug this cord into the accessory outlets found in

some audio components.

Subwoofer Controls and Connections

Phase Switch

Bass-Boost Switch

Power-On Mode Switch

Subwoofer Level Control

External Trigger Input Connector

Line-Level In LFE Connector

Line-Level In L/R Connector

Power Switch

Power Cord

BDS

Remote Control Functions Eject Button: Press this button to eject a disc from the BDS receiver’s built-in disc player.

Before pressing this button, make sure no objects are blocking the disc slot opening.

Power Button: Pressing this button toggles the BDS receiver between the On and Standby

modes.

TV Power Button: After you program the remote control, pressing this button turns the

TV’s power on and off. See Programming the Remote, on page 18.

Disc Button: Pressing this button selects the BDS receiver’s built-in disc player as the

system’s active audio and video source and plays a disc that has been inserted into the player.

Pressing this button also puts the remote control into the disc player control mode. See Using

the Disc Player, on page 24, for details. NOTE: Pressing this button when the BDS receiver is in

the Standby mode will switch it on.

Radio Button: Pressing this button selects the BDS receiver’s built-in FM radio as the

system’s active audio source. Pressing this button also puts the remote control into the

control mode for the radio. See Using the Radio, on page 26, for details. NOTE: Pressing this

button when the BDS receiver is in the Standby mode will switch it on.

iPod Button: Pressing this button selects an iPod inserted in a connected The Bridge IIIP

dock (available separately) as the system’s active audio source. Pressing this button also puts

the remote control into the control mode for the iPod. See Listening to Your iPod/iPhone, on

page 26, for details. NOTE: Pressing this button when the BDS receiver is in the Standby mode

will switch it on.

Aux Button: Pressing this button selects the receiver’s active rear-panel audio input as the

system’s active audio source. Repeatedly pressing the button cycles through all of the rear-

panel audio inputs. See Listening to Audio Sources, on page 27, for details.

Pressing this button also places the remote into the auxiliary-component control mode,

enabling the remote to use any pre-programmed and/or learned functions. See Listening to

Audio Sources, on page 27, for details. NOTE: Pressing this button when the BDS receiver is in

the Standby mode will switch it on.

Settings Button: Pressing this button displays the BDS receiver’s Settings menu. See

Settings Menus, on page 20, for details.

Repeat Button: When the BDS is playing a Blu-ray Disc recording or DVD, pressing this

button cycles through the following repeat modes: Chapter, Title, All, Off. When the BDS is

playing a CD or listening to media stored on an iPod or USB device, this button cycles through

the following repeat modes: Track, All, Off.

A-B Button: Pressing this button activates the A-B repeat mode. The first press sets the “A”

repeat point; the second press sets the “B” repeat point and begins repeating the section of

the program between the two points. Pressing the A-B button while the A-B repeat mode is

active cancels the A-B repeat mode. This feature works both for the built-in disc player and

for content from a USB device. NOTE: This feature is disc-dependent. Some discs do not allow

A-B repeat.

Display Button: When playing Blu-ray Disc and DVD recordings, pressing this button

activates a bar display containing information about the currently-playing disc or program.

The button does not function when the BDS is playing material from an iPod, a USB device, an

auxiliary source or the radio.

Numeric Buttons: Use these buttons to enter numbers for various items.

Clear Button: This button clears an incorrect entry made using the Numeric buttons.

Remote Control Functions

Power Button

Radio Button

Disc Button

Settings Button

Eject Button

Repeat Button

Clear Button

Home Button

Surround Button

OK Button

Exit Button

Top Menu Button

Search/

Slow Reverse Button

Volume Up/Down Buttons

Previous/Step Button

Stop Button

Mute Button

Program (Red)Button

Bookmark (Green) Button

TV Power Button

iPod Button

Aux Button

Display Button

Numeric Buttons

A-B Button

Find Button

Options Button

Cursor Controls

Pop-Up Menu Button

Search/

Slow Forward Button

Channel Up/

Down Buttons

Next/Step Button

Play Button

Pause Button

Zoom (Blue) Button

Thumbnail (Yellow) Button

BDS

ENGLISH

Remote Control Functions

Find Button: Pressing this button during disc playback activates the search function,

allowing you to jump to a specific location on the disc. You can find a location by title, chapter

or time. NOTE: This feature is disc-dependent. Some discs do not allow finding locations by

title.

Home Button: Pressing this button returns the on-screen display to the Home screen from

whatever screen is active when the button is pressed.

Surround Button: Pressing this button cycles through all of the surround-sound modes

that are available for the active program. Each press of the Surround button will change to

the next mode in line. A pop-up display will appear, showing the modes as you cycle through

them. NOTE: Not all surround modes will be available for all programs. See Surround-Sound

Modes, on page 24, for more information.

Options Button: Pressing this button displays any available options for the item that

is active at the time the button is pressed. When listening to an Aux source, pressing the

Options button lets you adjust the audio delay to eliminate “lip sync” errors between the

sound and picture when watching video programs with sound playing through one of the

receiver’s rear-panel audio inputs. See Listening to Audio Sources, on page 27, for details.

Cursor Controls: Use these buttons to navigate through items on the on-screen menu.

OK Button: Press this button to select the highlighted item on the on-screen menu.

Exit Button: Pressing this button exits the current on-screen menu and displays the

previous screen.

Top Menu Button: Displays the top menu of the Blu-ray Disc recording or DVD that is

playing. NOTE: This feature is disc-dependent. Not all DVDs have top menus. If the DVD has no

top menu, pressing the Top Menu button may display the disc menu, depending on how the

disc’s menu system was authored. See Using the Disc Player, on page 24, for details.

Pop-Up Button: Pressing this button while playing a Blu-ray Disc recording or DVD displays

its disc menu. NOTE: This feature is disc-dependent. Not all DVDs have pop-up menus. If the

DVD has no pop-up menu, pressing the Pop-Up button may display the disc menu, depending

on how the disc’s menu system was authored.

Previous/Step Button: Press this button once to skip to the beginning of a track or, when

viewing photos, to the previous photo. Press the button twice to skip to the beginning of

the previous track. Press the button repeatedly to go back through the previous chapters or

tracks. When video content is playing on Blu-ray Disc recordings and DVDs, press the Pause

button first; afterwards, each subsequent press of the Previous/Step button reverses the

video one frame.

Next/Step Button: Press this button once to skip to the beginning of the next track or,

when viewing photos, to the next photo. Press the button repeatedly to advance through

the next chapters or tracks. When video content is playing, press the Pause button first;

afterwards, each subsequent press of the Next/Step button advances the video one frame.

Search/Slow Reverse Button: Press this button to reverse through a disc track. For Blu-

ray Disc recordings and DVDs, each press cycles through 2x, 4x, 8x, 16x and 32x reverse speed.

Pressing the button while a Blu-ray Disc recording or DVD is paused will reverse through the

chapter in slow motion. Each press cycles through 1/2, 1/4, 1/8 and 1/16 normal speed.

Search/Slow Forward Button: Press this button to fast-forward through the current disc

track. For Blu-ray Disc recordings and DVDs, each press cycles through 2x, 4x, 8x, 16x and 32x

normal speed. Pressing the button while a Blu-ray Disc recording or DVD is paused will play

through the chapter in slow motion. Each press cycles through 1/2, 1/4, 1/8 and 1/16 normal

speed.

Stop Button: Press this button to stop playback at the current point. (Pressing the Play

button will resume playback from this point.) Press the Stop button twice to stop playback

fully. NOTE: Some settings and functions will be available only when the player is fully

stopped.

Play Button: Press this button to play a disc that has been loaded into the player’s disc

drawer or a music file that has been highlighted on the on-screen menu. Pressing this button

when viewing photos begins a slide show of all photos in the current folder.

Pause Button: Press this button to pause a disc or music file that is playing. Pressing the

button while a Blu-ray Disc recording or DVD is playing will freeze-frame on the current video

frame. Pressing the button while the disc is paused will resume play. Pressing this button

while viewing photos freezes the current photo on the screen.

Volume +/– Buttons: Press these buttons to increase or decrease the volume of the

BDS receiver’s speaker outputs. NOTE: The Volume +/– buttons do not change the volume of

the HDMI audio outputs.

IMPORTANT: Do not turn the Volume buttons up to or past the point where the

audio from the speakers becomes distorted. Doing so can damage the speakers.

Mute Button: Press this button to mute the sound from the BDS receiver’s speaker outputs.

Press the button again to un-mute the sound. NOTE: The Mute button does not mute the

HDMI audio outputs.

Channel +/– Buttons: When Radio is the source selected on the remote control, the

Channel +/– buttons select the next higher or lower preset station.

Bookmark (Green) Button: Press this button to activate the Bookmark function. See

Bookmark Function, on page 25, for more information.

Thumbnail (Yellow) Button: Press this button while playing a photo slide show to

display thumbnail images of all photos in the slide show.

Program (Red) Button: Press this button to create a programmed playback list for the

currently-playing disc. See Programmed Play, on page 25, for more information.

Zoom (Blue) Button: Press the Zoom button to zoom in on or recede from a video image

or slide. Use the Navigation buttons to zoom in on different sections of the image. NOTE: This

function is disc-dependent for Blu-ray Disc recordings and DVDs. Not all discs can be zoomed

in on.

Red, Green, Yellow and Blue Buttons: When the BDS is playing a Blu-ray Disc

recording, these buttons can activate features and menus that may vary from disc to disc.

Refer to the menu instructions for each particular disc for more information. NOTE: These Blu-

ray Disc functions may override the Bookmark, Thumbnail, Program and Zoom functions.

BDS

Placing the Speakers (BDS 800, BDS 700, BDS 400 and

BDS 300 Systems)

Placing the Front Left and Front Right Speakers

Front Right

Speaker

Front Left

Speaker

Place the front speakers the same distance from each other as they are from the listening

position. Place them at about the same height from the floor as the listener’s ears will be. You

can also angle them toward the listener.

Placing the Center Speaker (BDS 800 and BDS 700 systems only)

0 – 2ft

(0 – 61cm)

Front Right

Speaker

Center

Speaker

Front Left

Speaker

Place the center speaker directly above or below the center of the TV screen. Its center should

be no more than 2 feet (61cm) above or below the tweeters of the front left and front right

speakers. If you have a CRT television, it may be convenient to set the center speaker on top

of the television set.

Placing the Subwoofer

Front Right

Speaker

Subwoofer

Front Left

Speaker

Since our ears do not hear directional sound at the low frequencies where the subwoofer

operates, it will perform well from just about any location in your room. However, the best

bass reproduction is likely to be heard if you place the subwoofer in a corner along the same

wall as the front left and right speakers.

You can experiment with subwoofer placement by temporarily placing the subwoofer in

the listening position and playing music with strong bass content. Move around to various

locations in the room while the system is playing, and listen until you find the location where

the bass performance is best. Place the subwoofer in that location.

Placing the Surround Speakers (BDS 800 and BDS 700 systems only)

5 – 6 ft

(1.5m – 1.8m)

Surround Left

Speaker

Surround Right

Speaker

Front Right

Speaker

Center Speaker

Surround Right

Speaker

Subwoofer

Front Left

Speaker

Surround Left

Speaker

You should place the two surround speakers slightly behind the listening position, facing

each other, 5 – 6 feet (1.5m – 1.8m) from the floor. An alternate location would be on a wall

behind the listening position, facing forward. The surround speakers should not call attention

to themselves while they’re playing. Experiment with their placement until you hear a

diffuse, ambient sound from the front left, front right and center speakers.

Placing the Speakers (BDS 800, BDS 700, BDS 400 and BDS 300 Systems)

BDS

ENGLISH

Placing the Speakers (BDS 600 System) and

Mounting Options for Satellite and Center Speakers

Placing the Speakers (BDS 600 System)

Placing the Front Left and Front Right Speakers

If your TV is placed on a table, you can place the soundbar on the table directly in front of the

TV, centered with the TV screen. Attach the supplied rubber feet to the soundbar as shown in

the illustration.

If your TV is located in an entertainment or media center, you can mount the soundbar in a

space directly above or below the TV.

WARNING: Do NOT place the soundbar directly on top of a TV or at the front

edge of a table or cabinet. It could roll forward and injure someone.

Wall-Mounting the Soundbar

If your TV is attached to a wall, you can use the included wall-mount brackets to mount the

soundbar on the wall directly below the TV screen.

Determine the location for the soundbar on the wall. Make sure that the top of the 1.

soundbar will not block your view of the TV screen when it is mounted on the wall.

Mark the locations of the soundbar wall-mount bracket holes on the wall. The holes for 2.

the left and right brackets are spaced 600mm apart. The top and bottom holes for each

bracket are spaced 25mm apart. See the illustration below.

NOTE: To insure that the soundbar will be level, use a carpenter’s level, a laser sight or another

device to insure that the two sets of holes are at exactly the same height.

Attach the two wall-mount brackets to the wall at the locations you marked, using 3.

hardware that is appropriate for the wall’s construction and materials. Note that the

soundbar weighs 8.1 lb (3.67kg). Be sure to use hardware that can support this weight.

After making all of the connections described in the 4. Connections section, on page 14,

attach the soundbar to the brackets by sliding the slots in its rubber bumpers onto the

brackets’ vertical tabs.

Slide Slots in

Rubber Bumpers

onto Tabs on

Brackets

Placing the Subwoofer

Follow the subwoofer placement directions in Placing the Speakers (BDS 800, BDS 700, BDS

400 and BDS 300 Systems), on page 10.

Mounting Options for Satellite and Center Speakers

Shelf Placement

You can place the satellite and center speakers on shelves. BDS 800 and BDS 400 satellite

speakers have built-in bases for shelf placement. If you want, you can remove a base by

pulling it straight off its speaker. Apply even pressure to both sides of the base and smoothly

slide it off the speaker.

Apply Pressure Evenly to Both

Sides of Base Lift Base Straight off Speaker

Wall-Mounting the BDS 800 and BDS 400 Satellite Speakers

IMPORTANT: Read the Connections section, on page 14, before wall-mounting the satellite

speakers. You will need to insert the speaker wires through the wall-mount brackets and

connect the wires to the speakers during the process of installing the brackets.

NOTE: If you are using your own speaker wire, it must be no thicker than the wire supplied

with the speakers. Thicker wire will prevent the wall-mount bracket from sliding onto the

speaker.

Decide on the location for the speaker (see 1. Placing the Speakers (BDS 800, BDS 700, BDS

400 and BDS 300 Systems), on page 10).

Remove the speaker’s base as explained in 2. Shelf Placement, on this page.

Disassemble the wall-mount bracket by pulling the two sections apart.3.

Pull Sections Apart

BDS

Mounting Options for Satellite and Center Speakers

Attach the wall portion of the wall-mount bracket onto the wall using hardware that is 4.

appropriate for the wall’s construction and materials. We recommend first anchoring the

bracket using its keyhole, then attaching it with another anchor through its top opening,

as shown in the illustration. The satellite speakers weigh 3.3 lb (1.5kg). Be sure to use

hardware that can support this weight.

Top Opening

Keyhole Opening

Bottom Opening

NOTE: If you’re running the speaker wire through the wall, you can bring it out directly behind

the bracket location and insert it through the bottom opening in the wall portion of the

bracket, as shown in the illustration. This move will keep the wire completely hidden from

view once the installation is complete.

Insert Wire into

Bottom Opening

Bring Wire Out

Through Here

If you’re not running the speaker wire through the wall, insert it through the wall portion 5.

of the wall-mount bracket as shown in the illustration.

Pass the speaker wire through the speaker portion of the wall-mount bracket as shown 6.

in the illustration.

Bring Wire Out

Through Here

Bring Wire In

Through Here

If you have not already removed the speaker’s base, do so by pulling it straight off the 7.

speaker, as shown in the illustration. Applying even pressure to both sides of the base

will allow it to slide off smoothly.

Apply Pressure Evenly to Both

Sides of Base Lift Base Straight off Speaker

CAUTION: Before making speaker connections, be sure that the BDS receiver is

turned OFF and, preferably, its AC cord is unplugged from the AC outlet.

Connect the speaker wire to the speaker terminals as shown in the illustration:8.

+–

A. Push Down on Cap

to Open Hole

B. Insert Bare Wire

into Open Hole

C. Release Cap

to Secure Wire

Colored Band

to Red Terminal

IMPORTANT: Make sure the (+) and (–) bare wires do not touch each other or the other

terminal. Touching wires can cause a short circuit that can damage your receiver or amplifier.

Slide the speaker portion of the wall-mount bracket onto the speaker as shown in the 9.

illustration below. Fit the grooves on the bracket onto the rails in the speaker, and apply

even pressure on both sides of the bracket so it slides straight onto the speaker.

Push the bracket all the way onto the speaker until it snaps into place.

Pull any slack speaker wire back through the bracket as you slide the bracket onto the

speaker.

Fit Bracket Grooves

onto Speaker Rails

Push Down Evenly on

Both Sides of Bracket

Slide the speaker onto the bracket’s wall section as shown in the illustration. Pull any 10.

slack speaker wire back through the bracket’s wall section.

Slide Speaker

onto Bracket

Fit the metal stop plate into the recess on the bottom of the bracket with the pad facing 11.

the bracket, and fasten it to the bracket using two of the supplied screws. Fastening it

will prevent the speaker from detaching from the bracket and will hold the speaker’s

position as you rotate it on the mount.

Stop Plate

Supplied Screws

BDS

ENGLISH

Mounting Options for Satellite and Center Speakers

Wall-Mounting the BDS 800 Center Speaker

Decide on the location for the speaker (see 1. Placing the Speakers (BDS 800, BDS 700, BDS

400 and BDS 300 Systems), on page 10).

Attach the center-speaker wall-mount bracket to the wall using hardware that is 2.

appropriate for the wall’s construction and materials. Attach the anchors through the

holes shown in the illustration.

Use These Holes to Attach

Bracket to Wall

NOTE: The center speaker weighs 3.2 lb (1.45kg). Be sure to use hardware that can support

this weight.

CAUTION: Before making speaker connections, be sure that your receiver or

amplifier is turned OFF and, preferably, its AC cord is unplugged from the AC

power source.

Connect the speaker wire to the speaker terminals.3.

+–

A. Push Down on Cap

to Open Hole

B. Insert Bare Wire

into Open Hole

C. Release Cap

to Secure Wire

Colored Band

to Red Terminal

Using two of the supplied screws, attach the center speaker to the wall-mount bracket, as 4.

shown in the illustration.

Wall-Mount

Bracket

Supplied Screws

Wall-Mounting the BDS 700 and BDS 300 Satellite Speakers

Remove the black shelf stand from the bottom of the speaker by unscrewing the bolt. 1.

Store the shelf stand and bolt in a safe place in case you need them in the future.

1. Remove Bolt

2. Remove Stand

Determine the locations for the speakers. (See 2. Placing the Speakers (BDS 800, BDS

700, BDS 400 and BDS 300), on page 10, for more information.) If possible, position

the speakers so that the mounting screws (not included; use size #8) can be installed

directly into a wall stud. If that is not possible, use optional wall anchors that are rated

to support at least 25 lb (11.3kg) and are appropriate for the construction and materials

of your wall. The customer is responsible for the proper selection and use of

mounting hardware, available through hardware stores, to wall-mount the

speakers properly and safely.

Bring the speaker cable through the wall-bracket attachment plate, and mount the 3.

attachment plate on the wall in the desired location.

Bring Speaker Cable Through Opening

Thread the speaker cable through the arc-shaped opening on the top of the mounting 4.

bracket, not the screw hole.

Cable to Speaker

Cable from Wall

Plate

Side ViewOverhead View

Bring Speaker Cable Through

Arc-Shaped Opening

Attach the mounting bracket to the wall plate by inserting the tab at the top of the 5.

attachment plate into the slot on top of the bracket and snapping the bracket onto the

attachment plate.

Insert Tab into Slot and Snap

Bracket onto Plate

Feed Cable Through Mount

and out of Opening

Fit the terminal cover onto the bracket as shown in the illustration 6. below, then connect

the speaker leads to the terminals on the underside of the speaker. Remember to observe

the correct polarity. See Connecting the Satellite and Center Speakers (BDS 700 and BDS

300 systems), on page 15, for more information.

Terminal Cover

Mounting Bracket

Side View

Connect Cable Leads to

Speaker Terminals

Fit the terminal cover into the opening on the underside of the speaker so that it is flush 7.

against the speaker and covers the terminals. Insert the supplied long bracket bolt up

through the bottom of the bracket and terminal cover, and screw it into the threaded

insert on the underside of the speaker. The bolt should be snug but not so tight as to

prevent the speaker from pivoting on the bracket.

Fit Terminal Cover into Recess

on Speaker Bottom

Attach Speaker to Bracket

Using Long Bolt

BDS

Mounting Options for Satellite and Center Speakers,

and Connections

You can pivot the wall-mounted speaker from side to side; however, attempting to tilt it up

or down will damage the bracket and possibly the wall, which would not be covered by your

warranty.

Wall-Mounting the BDS 700 Center Speaker

Determine the location for the speaker (see 1. Placing the Speakers (BDS 800, BDS 700, BDS

400 and BDS 300 Systems), on page 10, for more information). If possible, position the

speaker so that one of the mounting screws (not included; use size #10) can be installed

directly into a wall stud. If that is not possible, use optional wall anchors that are rated

to support at least 25 lb (11.3kg) and are appropriate for the construction and materials

of your wall. The customer is responsible for the proper selection and use of

mounting hardware, available through hardware stores, to wall-mount the

speaker properly and safely.

Bring the speaker cable through the wall-bracket attachment plate as shown, and mount 2.

the attachment plate on the wall in the desired location.

Use Mounting Hardware Appropriate for

Wall Construction and Materials

Bring Cable Through Opening

Remove the rubber pads from the foot rests on the bottom of the center speaker and 3.

connect the speaker leads to the terminals on the underside of the speaker. Remember to

observe the correct polarity. See Connecting the Speaker Terminals (BDS 700 and BDS 300

systems), on page 15, for more information.

Connect Cable

Remove Pads

Use the supplied screws to attach the speaker to the wall-mount bracket. The screws 4.

thread into the center foot-rest openings that were exposed when you removed the

rubber pads in the previous step.

Use Supplied Screws to Attach

Speaker to Bracket

Thread Screws into Center Openings

Connections

CAUTION: Before making any connections to the BDS receiver, ensure that the

receiver’s AC cord is unplugged from the receiver and the AC outlet. Making

speaker connections with the receiver plugged in and turned on could damage

the speakers.

Speakers and receivers/amplifiers have corresponding (+) and (–) connection terminals. Your

system’s satellite speakers use red to denote the (+) terminal and black for the (–) terminal.

The

BDS 2 receiver uses white to denote the left channel (+) terminal and red for the

right channel (+) terminal. Black is used to denote the (–) terminal of both channels.

The

BDS 5 receiver uses the following colors to denote the (+) terminals of the various

channels:

Front Left (+): White Surround Left (+): Blue

Front Right (+): Red Surround Right (+): Gray

Center (+): Green

Black is used to denote the (–) terminals of all channels on the BDS 5 receiver.

The speaker wires included with your system have colored bands at both ends of the (+)

conductor; the colors correspond to the receiver’s (+) terminal colors. This system helps you

connect each speaker to the correct receiver or amplifier terminals. In addition to the colored

bands at each end, each speaker wire’s (+) terminal has ribs molded into its insulation to

help identify it.

Be sure to connect each speaker identically: (+) on the speaker to (+) on the receiver or

amplifier, and (–) on the speaker to (–) on the receiver or amplifier. Miswiring one or more

speakers results in thin sound, weak bass and a poor stereo image.

CAUTION: Make sure the (+) and (–) bare wires do not touch each other or the

other terminal. Touching wires can cause a short circuit that can damage your

receiver or amplifier.

Connecting the Satellite and Center Speakers (BDS 800 and BDS 400

systems)

+– +–

+–+– +–

Surround Right*

Front Right

* Speakers included only in BDS 800 system

Front Right Cable

(Red Bands)

Surround Right Cable

(Gray Bands)

Front Left Cable

(White Bands)

Surround Left Cable

(Blue Bands)

BDS Receiver (BDS 5 shown)

Center Cable

(Green Bands)

Surround Left*

Front Left

Center*

BDS

ENGLISH

Connections

Connecting the Satellite and Center Speakers (BDS 700 and BDS 300

systems)

–

–+

–

Surround Right*

Front Right

* Speakers included only in BDS 700 system

Surround

Right Cable

(Gray Bands)

Surround

Left Cable

(Blue Bands)

BDS Receiver (BDS 5 shown)

Surround Left*

Front Left

Front Right Cable

(Red Bands)

Front Left Cable

(White Bands)

Center Cable

(Green Bands)

Center

Connecting the Satellite and Center Speakers (BDS 600 system)

L C R

–+–+–+

Red

Band

BDS Receiver

SB 10 Soundbar

White

Band

Green

Band White

Band

Green

Band

Red

Band

Connecting the Speaker Terminals (BDS 800 and BDS 400 systems)

+–+–

1. 2. 3.

1. 2.

Colored Band

to Red Terminal

Connecting the Speaker Terminals (BDS 700 and BDS 300 systems)

1. 2. 3.

Colored Band

to Red Terminal

Connecting the Speaker Terminals (BDS 600 system)

–+–+

1. 2. 3.

Colored Band

to Red Terminal

Connecting the Receiver Terminals (all systems)

A. Unscrew Cap B. Insert Bare Wire C. Tighten Cap

BDS

Connections

Connecting the Subwoofer (all systems)

Use the supplied mono RCA audio cable (purple connectors) to connect the subwoofer’s Line-

Level LFE In connector to the BDS receiver’s Subwoofer output.

BDS Receiver (BDS 2 shown)

Subwoofer

Mono RCA Cable (included)

To Subwoofer

Output

To Line Level LFE In

IMPORTANT: Do not plug the subwoofer’s AC power cord into an AC outlet at this

time.

Connecting the Radio Antenna

Connect the supplied antenna to the Radio Antenna connection, as shown in the illustration

below. Fully extend the antenna wire and move it to different positions until you get the best

reception of your favorite stations.

Connecting a TV or Video Display

Use the supplied HDMI cable to connect the BDS receiver’s HDMI output to your TV/video

display’s HDMI input. The BDS receiver is HDMI version 1.3a.

NOTE: The HDMI connection will deliver both video and audio to your TV or video display. We

suggest disabling your TV or video display’s audio system to take full advantage of your BDS

system’s superior audio reproduction.

BDS

ENGLISH

Connections

Connecting Audio Sources

Tape Deck

-OR-

To Audio

Output

To Play Output

To Coaxial Output

To Optical

Output

To Optical Output

Cable/Satellite Tuner

Digital Audio Source

Analog Audio Inputs 1 and 2: If you have an audio-only analog source component (such

as a tape deck), connect its left and right analog outputs to the Analog Audio Input 1 or

Analog Audio Input 2 jacks as shown in the illustration.

NOTE: To hear a TV show through your BDS system, you need to connect the audio output of

your TV to the BDS receiver. If your TV has a digital-audio output, you can connect it to one of

the BDS receiver’s digital inputs (see below). If your TV does not have a digital-audio output,

you will need to connect the TV’s analog-audio output to the BDS receiver’s Analog Audio

Input 1 or Analog Audio Input 2 jacks.

Coaxial In and Optical 1/Optical 2 In: If you have an audio-only digital source

component (such as a CD changer or video game), you can connect it to one of these inputs,

as shown in the illustration. When using the Optical 1 and Optical 2 digital connections,

gently push the cable connector through the panel connector’s built-in shutter until it is

firmly seated in the connector.

NOTE: Use only one type of digital connection for each source component.

Connecting to a Local Area Network (LAN)

Use a CAT. 5/RJ45 network cable (not supplied) to connect the BDS receiver’s BD-Live

connector directly to a network router, a network switch, a network modem or an Ethernet

network wall jack that has Internet access.

NOTE: The BDS receiver can not access content on other networked devices. The Network

connection enables only the receiver’s BD-Live features. See BD-Live Interactivity, on page 26,

for details.

Network Modem

Cat. 5/5E

To Internet

Connecting the AC Power

The BDS receiver comes with a detachable AC power cord. This type of cord makes it easier for

you to install and connect all other system wiring to the receiver’s rear panel. The subwoofer

has a non-detachable power cord.

NOTES:

The power requirement for the

BDS receiver is 110V – 240V AC, 50/60Hz, 110W (BDS 5

receiver) or 70W (BDS 2 receiver). The power requirement for the subwoofer is 110V –

120V AC, 60Hz, 200W (USA) or 220V – 240V AC, 50/60Hz, 200W (EU). Connecting to a

power source other than the ones listed may damage the receiver or subwoofer, or cause

abnormal operation.

Before connecting the AC power cords to wall outlets, confirm that you have correctly

made all of the speaker connections, video connections and audio-component

connections.

Connect the female end of the receiver’s detachable power cord to the receiver’s AC Power

Input connector. Plug the other end into a working, unswitched AC outlet. Plug the

subwoofer’s power cord into a working, unswitched AC outlet as well.

PL0004-01001

Receiver

110V – 240V, 50Hz/60Hz

Subwoofer

USA: 120V, 60Hz

EU: 220V – 230V, 50Hz/60Hz

Set the receiver’s and subwoofer’s Main Power switches in the “On” position. The receiver’s

Power indicator will turn amber, indicating that the receiver is in the Standby mode.

The subwoofer’s LED will not light up until it receives a turn-on signal. See

Subwoofer

Controls and Connections, on page 7, for details.

BDS

Preparing the Remote Control

Installing the Batteries

Your BDS system remote control uses 3 AAA batteries (supplied). Insert the batteries as

shown in the illustration, making sure to observe the correct polarity.

––

–

––

1. 2. 3.

Using the Remote

When using the remote, remember to aim it toward the receiver’s front panel. Make sure that

no objects, such as furniture, block the remote’s view of the receiver. Bright lights, fluorescent

lights, and plasma-video displays may interfere with the function of the remote.

The remote has a range of about 20 feet (6.1m), depending on the lighting conditions.

You can use the remote at an angle of up to 30° to either side of the

BDS receiver.

If the remote seems to operate intermittently, or if pressing a button on the remote does not

cause one of the buttons to light up, make sure that the batteries are inserted correctly. If the

remote still operates intermittently, replace all three batteries with new ones.

Programming the Remote

In addition to controlling the BDS receiver, you can program the remote to control one

auxiliary (Aux) component. The remote is also capable of learning codes directly from other

remotes. This ability allows you to combine learned commands with programmed codes,

making the remote capable of controlling more than one Aux component. Typical Aux

components would be your TV, a satellite receiver or a cable receiver.

The remote will control the Aux component(s) only when the Aux source button has been

pressed. Pressing any other source button will put the remote back into the BDS receiver

control mode.

To program the remote to control an Aux component:

Look up the codes for the product type (e.g. TV, cable TV box) and the brand name of your 1.

source in the Aux Component Remote-Control Code List, on page 31.

Turn your auxiliary component on.2.

Press and hold the Aux button for three seconds as it turns red, goes dark and turns 3. red

again. Then release the button.

NOTE: The remote will remain in the programming mode for 20 seconds. You must perform

Step 4 within 20 seconds.

Aim the remote toward the component you just turned on and enter a code number from 4.

Step 1, above. If the component turns off, check that its own remote-control buttons

control the component as expected. If they do, press the Aux button again to save the

code. The button will flash three times and the remote will exit the programming mode.

If any of the buttons do not work as expected, or if the device does not turn off when you 5.

enter the code number, repeat Step 4 with another code number from the list for that

manufacturer.

If you run out of codes, you can search through all of the codes in the remote’s library for 6.

that product type.

Press and hold the Aux button for three seconds. The button will turn a) red, go dark

and turn red again. Then release the button.

For a conventional US TV, enter ”0999”; for a conventional EU TV, enter “1999”; for b)

an HDTV, enter “2999”; for a US cable box, enter “3999”; for an EU cable box, enter

“4999”; for a US satellite tuner, enter “5999”; for an EU satellite tuner, enter “6999.”

Aim the remote control toward the component and press the remote’s Cursor Up c)

button. Each press of the button sends the “Power” signal for one setup code number.

Holding down the Cursor Up button quickly scans through all of the setup code

numbers.

Release the Cursor Up button as soon as the component turns off. If you pass the d)

correct setup code number, you can return to it by pressing the Cursor Down button,

one setup code number at a time, until the component turns back on.

Check that the other remote-control buttons control the component as expected. If e)

they do, press the Aux source selector button again to save the code. The button will

flash three times, and the remote will exit the programming mode.

If the remote does not operate as expected, repeat Steps c – e. Note that some f)

components may not respond to all of the above commands and may support only

some of the commands listed.

To teach individual button codes to the remote:

You can teach codes from other component remotes onto the BDS receiver remote buttons

shown shaded in the following illustration:

DISC

AUX

iPOD

RADIO

SETTINGS

DISPLAY

A - B

REPEAT

EJECT SYSTEM DEVICE

CLEAR

HOME

FIND

OPTIONS

SURROUND

TOP MENU

POP-UP

EXIT

––

VOLUME

CHANNEL

MUTE

THUMBNAIL

ZOOM

BOOKMARK

PROGRAM

= Learning Capable

Place the 1. BDS remote and the remote from which you want it to learn codes head-to-

head about 1 inch (2.5cm) apart, with their IR transmitter windows facing each other.

Press and hold the Settings button on the 2. BDS receiver remote for more than three

seconds. The remote’s Aux button will light up.

Press the button on the 3. BDS receiver remote to which you want to teach the command.

The Learn mode will remain active for 20 seconds after the button is pushed.

Press the button on the other remote that you want to “teach” to the 4. BDS receiver remote.

When the IR code has been received and stored, the Aux button’s LED will flash three

times, and the BDS receiver remote will remain in the learning mode, ready to learn

another code. If no IR code is received within 20 seconds, the Aux LED will flash rapidly

several times, and the remote will exit the learning mode. To resume programming,

return to Step 2.

Repeat Step 3 and Step 4 for each command you want to teach the 5. BDS receiver remote.

NOTE: If the Aux button’s LED goes out at any time, you will need to begin again from

Step 2.

Programming Remote Control “Punch-Through” Commands

After programming the remote to control an auxiliary (Aux) component, you can also

program it so it will control the Aux component’s channel up/down and transport functions

(Play, Pause, etc.) even when the remote is not in the Aux-control mode. For example, if the

BDS

ENGLISH

Preparing the Remote Control

and Setting Up the Receiver

Setting Up the Receiver

NOTE: The menu screens shown in this manual are for illustrative purposes and may differ

somewhat from the actual displays.

To set up your BDS system, you will use the remote to navigate through all of the on-screen

menus and make selections from them.

Use the Cursor Up/Down buttons to navigate through the menu list. When an item is

highlighted, a border will appear around it.

To select a highlighted item, press the OK button. The screen will change depending on

your selection.

To return to the previous screen, press the Exit button.

Setup Wizard

When you turn your BDS receiver on for the first time, the on-screen menu will display the

Setup Wizard.

Setup Wizard Page: 1/5

Welcome to the Harman Kardon BDS Setup

Wizard.

Some simple information is needed to ensure

you get the best experience from your product.

You can adjust these settings later in addition

top making changes to more advanced settings

by pressing the ‘Settings’ button on the

remote.

Before you can use your BDS system, you need to set the language and make a few basic

settings so that the BDS receiver’s video output will work properly with your TV. Press the OK

button and the Wizard’s language screen will appear.

Setup Wizard

Page: 2/5

Please select which language you

would like the BDS menus to appear.

English

Español

Français

Deutsch

Italiano

After setting the language you want the on-screen menus to use, press the OK button, and

the Wizard’s TV-resolution screen will appear.

Setup Wizard Page: 3/5

Please select the highest resolution that your

TV supports. If you are unsure, select ‘Auto’.

Upon making a selection the screen will be

changed to the chosen resolution. You will be

presented with the option to continue with the

new resolution or ‘Cancel’ to return to the

previous resolution. If the screen remains

blank, please wait 15 seconds without

pressing anything and the system will

automatically return to the previous resolution.

Auto

480p/576p

720p

1080i

1080p

After selecting your TV’s highest resolution, press the OK button and the Wizard’s aspect-ratio

screen will appear. NOTE: If you’re unsure of your TV’s highest resolution, select “Auto,” and

BDS will automatically select the optimal resolution for you.

Setup Wizard Page: 4/5

Please select the best aspect ratio

that fits your TV.

16:9 Full

16:9 Normal

4:3 Pan & Scan

4:3 Letterbox

After selecting the aspect ratio that best fits your TV, press the OK button to save your setting,

and then press it again to exit the Setup Wizard.

remote is programmed to operate your TV in the Aux control mode, you can also have the TV’s

channel +/– functions “punch through” and operate even when the remote is in the Disc,

Radio or iPod control modes.

Press and hold the button for the main device the remote will be operating. The button 1.

will light up, go dark and then light up again. Release the button.

Select the type of punch-through programming.2.

For “punch-through” channel control, press the Channel Up button.a)

For “punch-through” transport control, press the Play button.b)

Press the Aux button. The original source button will flash to confirm.3.

You can repeat Step 1 – Step 3 for any of the remote’s source-selector buttons (Aux, Radio

etc.). NOTE: “Punch-through” channel and transport commands will override the existing

commands for those buttons in the source modes you program.

To undo “punch-through” programming, follow the same steps as above, but press the same

source selector button in Step 1 and Step 3.

Using the Remote After it is Programmed

Pressing the remote’s Aux source-selector button will put the remote into the auxiliary-

control mode, and it will control the auxiliary component(s) via the codes you have

programmed into it.

To switch the remote back to the BDS receiver-control mode from the auxiliary-control mode,

press any one of these buttons: Disc, Radio, iPod or Home.

BDS

Setting Up the Receiver

Settings Menus

Pressing the remote’s Settings button displays the receiver’s settings menus, which allow you

to configure the receiver’s various functions. Use the remote’s Cursor Left/Right buttons to

change from one menu to another, use the Cursor Up/Down buttons to navigate through the

lists that appear on the various screens, and use the OK button to select highlighted items.

Press the Exit button at any time to return to the previous screen.

Select to adjust general settings

System

Language

Playback

Parental Control

Network

General Settings

Select to adjust system settings

System

Language

Playback

Parental Control

Network

Front Panel Brightness

Screen Saver

Auto Power Off

System Upgrade

Setup Wizard

100%

Off

More...

General Settings

System: The System option allows you to set the following system features:

Front Panel Brightness: This option sets the brightness of the BDS receiver’s information

display.

Screen Saver: To prevent image burn-in, we recommended activating the Screen Saver

when using the BDS receiver with a CRT or plasma TV.

Auto Power Off: This option sets the amount of time the BDS receiver remains on while

idle until it automatically enters the Standby mode.

System Upgrade: Select this option when you want to install a BDS firmware upgrade for

your BDS receiver that you’ve downloaded from a harman kardon Web site or other harman

kardon source.

Setup Wizard: This option activates the receiver’s Setup Wizard (see Setup Wizard, on page

19).

BD-Live Storage: This option lets you set up how the BDS receiver will handle stored

BD-Live content. You can choose to store the content either in the receiver’s internal memory

or on a USB memory device via the receiver’s USB port. See BD-Live Interactivity, on page 26,

for details.

Restore Defaults: This option restores the receiver to its factory-default setting values.

Note: This procedure deletes all preset FM stations and restores the parental-control

password back to the factory default of 0000.

Language: This setting lets you set the language for the disc player and the disc menus, the

preferred audio language and the preferred subtitle language.

NOTE: If the selected language is not available on the particular disc being played, use the

disc’s menu to set the language from those available on the disc.

Playback: The Playback option allows you to set the following disc playback features:

Show Angle Icon

: This option lets you select whether or not the angle icon will

automatically be displayed when a disc with multiple camera angles is played.

Auto Play

: This option lets you select whether discs will automatically begin playing

when they are loaded into the BDS receiver’s disc player.

Show PIP Icon

: This option lets you select whether or not the picture-in-picture (PIP)

icon will automatically be displayed when a Blu-ray Disc recording with PIP content is

played.

Show Secondary Audio Icon

: This option lets you select whether or not the

Secondary Audio Icon will automatically be displayed when a Blu-ray Disc recording with

secondary audio content is played.

Disc Resume

: This option lets you select whether or not a disc that has been ejected

while playing will resume play from that location when it is re-inserted into the receiver’s

disc player.

DivX® VOD DRM

: This option displays your receiver’s DivX registration information.

Parental Control: This option lets you set the receiver’s parental-control password and the

level of parental control you want active. NOTE: The default password is 0000.

Network: This option allows you to set the following network features:

Information

: This option displays your network’s IP, subnet mask, gateway and DNS

addresses.

Test Connection

: This option tests for a proper network connection to the BDS receiver.

IP Configuration

: This option lets you enter your network settings, either

automatically or manually. Unless your network administrator instructs you otherwise,

you should use the Auto option.

BD-Live Connection

: This option lets you set the receiver’s BD-Live connection

preferences. “Always Allow” allows downloading of BD-Live content whenever a disc with

BD-Live content is played. “Limit” allows downloading only if the disc is officially BD-Live

certified. “Prohibited” does not allow any BD-Live access.

Proxy Setting

: “Enabled” allows you to select and set the Proxy Host and Proxy Port if

your network requires a proxy setting. “Disabled” bypasses any Proxy Host and Proxy Port

settings and prevents their selection. This option is for advanced users only and in most

cases should be left set to “Disabled.”

BDS

ENGLISH

Display Settings

Select to adjust display settings

Video Processing

Aspect Ratio

Resolution

Color Space

Film Mode

HDMI Deep Color

16:9 Full

Auto

RGB

Off

Display Settings

TV: This option allows you to set the following display parameters:

Aspect Ratio

: This option lets you select how you want 4:3 programs displayed on a

16:9 TV, or 16:9 programs displayed on a 4:3 TV. “16:9 Full” stretches 4:3 material to fill

a 16:9 TV screen. “16:9 Normal” displays 4:3 material on a 16:9 TV with black boxes on

either side of the picture, preserving the program’s original visual composition without

distortion. “4:3 Pan & Scan” zooms in on widescreen material to fill a 4:3 screen. “4:3

Letterbox” displays 16:9 material with black bars above and below the picture, preserving

the program’s original visual composition without distortion.

Resolution

: This option lets you select your TV’s highest resolution. “Auto” automatically

selects the best resolution for your TV.

Film Mode

: If your TV can handle a 1080p 24Hz signal (if it is 1080p resolution and has

a video-refresh rate that is a whole-number multiple of 24), set Film Mode to “On” to get

maximum resolution from Blu-ray Disc content mastered at 24 frames per second. If your

display cannot handle a 1080p/24Hz signal, set this option to “Off,” and the BDS receiver

will upconvert 24-frame-per-second film material to the standard video 30Hz refresh

rate.

HDMI Deep Color

: This option allows you to adjust the resolution of color output to

your TV. If your TV accepts Deep Color, this option allows your TV to display an enhanced

color palette.

On: The

BDS receiver outputs 36-bit Deep Color if your TV supports it. If your TV does

not, the receiver will output 30-bit color.

Off: The

BDS receiver does not output Deep Color (color resolution remains at 24 bits).

Video Processing: This option allows you to set the BDS receiver’s internal video

processing.

Video Mode: This setting lets you select a preset video-processing option to optimize the

picture for the current program by adjusting the brightness, contrast, color and sharpness:

Standard: Neutral control settings

Vivid: For video games

Cinema: For movies and many television broadcasts

Custom: This option lets you adjust the picture settings manually. The Brightness,

Saturation (color saturation), Hue, Contrast, Sharpness and CTI settings appear as sliders.

The default setting for each adjustment is 0. Use the Cursor Left/Right buttons to change

each setting’s value.

Audio Settings

Select to adjust Bass & Treble

Tone Controls

Audio Out

Bass

Treble

0dB

Audio Settings

Tone Controls: This option lets you increase or decrease the amount of bass (low

frequencies) and treble (high frequencies) in the sound. The adjustment ranges from –10dB

to +10dB, in 1dB increments.

Audio Output: This option lets you set the following items:

HDMI Audio Out

: In addition to digital video signals, the BDS receiver’s HDMI

connection also carries digital audio signals. Four settings are available:

Auto: This option causes the

receiver’s HDMI output to output the digital-audio format

that best matches the surround-sound decoding capabilities of the component it’s

connected to.

Bitstream Native: This option outputs the program in its native audio format via the

HDMI output.

PCM: This option outputs a two-channel downmix derived from the program’s native

audio format via the HDMI output.

Off:

This option turns the receiver’s HDMI audio output off. We recommend setting this

option to “Off,” so you can take full advantage of the superior audio capability of your

BDS system’s receiver and speakers.

Dynamic Range Control: This setting makes the loud and quiet parts of a movie or music

closer to the same volume (a process known as compression). Compression lets you turn up

the volume so you can hear the quiet parts without the loud parts disturbing others. NOTE:

This feature works only with Dolby Digital programs that have been specially encoded. Three

settings are available:

Off: Never applies compression. Use this setting when the volume may be as loud as you

desire.

On: Always applies compression. Use this setting when you want the volume to be as

quiet as possible without making it difficult to hear spoken dialogue.

Auto: Applies compression based on information encoded in the Dolby Digital bitstream.

The receiver will selectively apply compression only during the most dynamic parts of the

soundtrack.

Setting Up the Receiver

BDS

Setting Up the Receiver

Speaker Settings: This setting allows you to set up the receiver to work properly with the

speakers included in your BDS system. The available configurations are:

2.0: This configuration consists of left and right main speakers but no subwoofer.

Selecting this configuration sends all of the bass to the left and right speakers, so be sure

that they are full-range and can handle deep bass.

2.1: This configuration consists of left and right main speakers, plus a subwoofer.

BDS 400

and BDS 300 systems are factory-set to this configuration.

3.1: This configuration consists of front left, center and front right speakers, plus a

subwoofer. You must manually select this configuration for the BDS 600 system.

5.1: This configuration consists of front left, front right, center, surround left and surround

right speakers, plus a subwoofer. BDS 700 and BDS 800 systems are factory-set to this

configuration.

After you select your system’s configuration, the speaker setup screen will appear (BDS 800

and BDS 700 5.1-channel system screen shown):

L (0.0 dB, 3 ft)

R (0.0 dB, 3 ft)

Tone Controls

Audio Out to TV

Speaker Settings

SUB

Ls Rs

Center

Audio Settings

Setting the speaker distances:

The front left and front right speakers will be highlighted. Press the OK button. The Level 1.

and Distance selection screen will appear.

L (0.0 dB, 3 ft)

R (0.0 dB, 3 ft)

Tone Controls

Audio Out to TV

Speaker Settings

SW1

Ls Rs

Center

Audio Settings

Level

Distance

Press the Cursor Down button to highlight Distance, and press the OK button. The 2.

Distance adjustment bars will appear.

L (0.0 dB, 10 ft)

R (0.0 dB, 8 ft)

Tone Controls

Audio Out to TV

Speaker Settings

SW1

Ls Rs

Audio Settings

Measure the distance from the listening position to each of your system’s speakers, 3.

including the subwoofer. Write down the distances.

Use the left and right arrow buttons to adjust the “L” bar until it shows the distance you 4.

measured to the front left speaker (the arrowheads indicate which speaker is being

adjusted).

Press the Exit button twice to return to the speaker setup screen (the front left and front 5.

right speakers will still be highlighted).

Press the Cursor Down button. The subwoofer will be highlighted. Press the OK button. 6.

The Level and Distance screen will appear.

Repeat Steps 2 – 6 for the subwoofer. If you have a 7. BDS 800, BDS 700 or BDS 600 system,

repeat Steps 2 – 6 again for the center speaker, and if you have a BDS 800 or BDS 700

system, repeat Steps 2 – 6 again for the surround left and surround right speakers.

When you have entered the distances to all of your system’s speakers, press the Exit 8.

button repeatedly until the harman kardon logo screen appears.

NOTE: Leave all the speaker levels set at “0” for now. You will be able to adjust the individual

speaker levels once your system is set up and you’re playing music or films. See Adjusting

Individual Speaker Volumes, on this page.

Information Menu

Select to browse system information

Information

Software Version: BDS V1.04.06

MAC Address: 00 -1B -44 -12 -1D

The Information menu will display the receiver’s software/firmware version number and the

player’s factory-assigned network MAC Address. This screen is for information only and allows

no user adjustments.

BDS

ENGLISH

Using the Receiver

Using the receiver

NOTE: Before using your new BDS system, be sure to set the speaker distances, as explained

in Audio Settings: Speaker Settings, on page 22.

Home Menu

Press the Home button to display the Home Menu screen:

1 / 5 Exit Option

Type:Disc

Size:23684.875M

FS:UDF

Home Menu

Blu-ray Disc

USB

FM Radio

Playlist

Settings

HOME OPTIONS

The available sources are listed on the left.

If a disc has been inserted into the receiver’s built-in disc slot, it will appear on the list as

either “CDDA” (CD), “DVD Video” (DVD) or “Blu-ray Disc.”

NOTE: Audio sources connected to the receiver’s rear-panel digital and line inputs will not

appear on the list.

To select a source from the list, use the remote control’s Cursor Up/Down buttons to highlight

the desired source, then press the OK button to select it. To use the Playlist function, see

Using Playlists, on page 29.

You can also select a source directly by pressing its button (Radio, Aux, etc).

Adjusting Individual Speaker Volumes

You can adjust the volumes of the system’s individual speakers while you’re listening to music

or watching films.

Press the Settings button. The Settings menu will appear. 1.

Select the Audio option. The Audio menu will appear.2.

Select Speaker Settings, then select Configuration, and then select your system’s speaker 3.

configuration. After you select your system’s configuration, the speaker setup screen will

appear (BDS 800 5.1 system screen shown).

L (0.0 dB, 3 ft)

R (0.0 dB, 3 ft)

Tone Controls

Audio Out to TV

Speaker Settings

SUB

Ls Rs

Center

Audio Settings

The front left and front right speakers will be highlighted. To adjust either of them, press 4.

the OK button. To adjust a different speaker, use the cursor buttons to highlight it and

press the OK button. The Level and Distance selection screen will appear.

L (0.0 dB, 3 ft)

R (0.0 dB, 3 ft)

Tone Controls

Audio Out to TV

Speaker Settings

SW1

Ls Rs

Center

Audio Settings

Level

Distance

Make sure that Level is highlighted, and press the OK button. The Volume adjustment 5.

bars will appear.

L (0.0 dB, 10 ft)

R (0.0 dB, 8 ft)

Tone Controls

Audio Out to TV

Speaker Settings

SW1

Ls Rs

Audio Settings

Select the speaker you want to adjust, and use the left and right arrow buttons to adjust 6.

its volume. You can vary the volume from +10dB to –10dB, in 1dB increments.

Press the Exit button twice to return to the speaker setup screen (the front left and front 7.

right speakers will still be highlighted). To adjust the volume of a different speaker, use

the cursor buttons to highlight it and press the OK button. Repeat Steps 5 – 6 for that

speaker.

When you are finished adjusting the volumes of all of your system’s speakers, press the 8.

Exit button repeatedly until the harman kardon logo screen appears.

Notes on Setting Speaker Volumes in 5.1-Channel Systems:

While setting your system’s individual speaker volume levels is ultimately up to your personal

taste, here are some ideas you may find helpful:

For films and video-music programs, your overall goal should be to create an enveloping,

realistic sound field that draws you into the film or music program without drawing your

attention away from the action on the screen.

For multichannel music recordings, some music producers will create a sound field that

places the musicians all around you; others will create a sound field that places the

musicians in front of you, with more subtle ambience in the surround speakers (as you

would experience in a concert hall).

In most 5.1-channel films, the surround channels are not intended to be as loud or as

active as the front channels. Adjusting the surround speakers so they are always as loud

as the front channels could make dialogue difficult to understand and will make some

sound effects sound unrealistically loud.

BDS

Using the Receiver and Using the Disc Player

Notes on Setting Subwoofer Volume:

Sometimes the ideal subwoofer volume setting for music is too loud for films, while the

ideal setting for films is too quiet for music. When setting the subwoofer volume, listen

to both music and films with strong bass content and find a “middle ground” volume

level that works for both.

If your subwoofer always seems too loud or too quiet, you may want to place it in a

different location. Placing the subwoofer in a corner will always tend to increase its bass

output, while placing it away from any walls or corners will always tend to lessen its bass

output.

IMPORTANT: Do not turn the receiver’s volume up to or past the point where the

audio from the speakers becomes distorted. Doing so can damage the speakers.

Surround-Sound Modes

Your BDS receiver can decode and play audio programs in these native audio formats:

Dolby Digital

Dolby Digital Plus

Dolby TrueHD

DTS Digital

DTS-HD High Resolution Audio

DTS-HD Master Audio™

PCM

WMA (DRM-free version only): WMA9, CBR @192kbps, VBR @ 355kbps

MP3: 32kbps – 320kbps bitrates, including variable bitrate encoding

The audio formats available for any particular program depend on the program and on how

you have configured your BDS receiver in the Audio Settings menu:

Available Audio Formats

2.0- and 2.1- Channel

Setup Configuration

3.1-Channel Setup

Configuration

5.1-Channel Setup

Configuration

2.1-Channel

Programs

Dolby Virtual Speaker

Wide (default)/Dolby

Virtual Speaker Reference/

Stereo

Dolby PLII Movie

(default)/Dolby PLII

Music/Dolby Virtual

Speaker Wide/Dolby

Virtual Speaker Reference/

Stereo

Original (default)/

Dolby PLII Movie/

Dolby PLII Music/Dolby

Virtual Speaker Wide/

Dolby Virtual Speaker

Reference/Stereo

3.1-Channel

Programs

Dolby Virtual Speaker

Wide (default)/Dolby

Virtual Speaker Reference/

Stereo

Original (default)/ Dolby

Virtual Speaker Wide/

Dolby Virtual Speaker

Reference

Original (default)/

Dolby PLII Movie/

Dolby PLII Music/Dolby

Virtual Speaker Wide/

Dolby Virtual Speaker

Reference/Stereo

4.1-/5.1-

/6.1- Channel

Programs

Dolby Virtual Speaker

Wide (default)/Dolby

Virtual Speaker Reference/

Stereo

Dolby Virtual Speaker

Wide (default)/Dolby

Virtual Speaker Reference/

Stereo

Original (default)/ Dolby

Virtual Speaker Wide/

Dolby Virtual Speaker

Reference

To switch between the available surround-sound modes for the program currently playing,

press the Surround button. Each press of the Surround button will change to the next

available mode in line. A pop-up display will appear on the TV, showing the modes as you

cycle through them.

Listening Through Headphones

Your BDS receiver’s headphone connection accepts a standard 3.5mm stereo headphone plug.

When you insert the headphone plug into the connector, the receiver’s speaker outputs will

mute; the HDMI audio output will not mute.

When headphones are connected to the receiver’s Headphone connector, pressing the

remote’s Surround button cycles between these two modes:

HARMAN Headphone, which virtualizes a multichannel surround soundtrack down to

two channels. This mode retains the soundtrack’s original directional cues, allowing

you to enjoy an enveloping surround-sound experience on any ordinary pair of stereo

headphones.

Headphone Bypass, which downmixes surround-sound programs into normal stereo.

This mode does not retain any multichannel directional cues that may be in the original

surround-sound program.

Using the Disc Player

Disc Handling Precautions

To keep the disc clean, handle the disc by its edge. Do not touch the surface.

Do not stick paper or tape on the disc. If there is glue (or a similar substance) on the disc,

remove the substance completely before using the disc.

Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it

in a car parked in direct sunlight, as there can be a considerable rise in temperature inside

the car.

After playing, store the disc in its case.

Do not write on the label side with a ballpoint pen or other sharp writing utensils.

Be careful not to drop or bend the disc.

Disc Cleaning Precautions

Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.

Do not use solvents such as benzene, paint thinner, commercially available cleaners or

anti-static spray intended for vinyl LPs.

Regional Coding

BDS receivers sold in the USA are designed only for playback of discs with Blu-Ray Disc region

code A and DVD Region Code 1 information, or for discs that do not contain any region code

information. BDS receivers sold in Europe are designed only for playback of discs with Blu-ray

Disc region code B and DVD Region Code 2 information, or for discs that do not contain region

code information.

If there is a region code on a disc other than the one your BDS receiver is designed for, it will

not play in the receiver’s disc player.

Audio-visual material may consist of copyrighted works, which must not be recorded without

the permission of the owner of the copyright. Please refer to relevant laws covering copyright

protection.

Copy Protection

Your BDS receiver is in compliance with HDCP (High-Definition Copy Protection), and a video

display connected via the HDMI output must also be HDCP-compliant.

The BDS receiver supports Macrovision copy protection. On Blu-ray Disc recordings and DVD

discs that include a copy-protection code, if the contents of the disc are copied using a VCR,

the copy-protection code prevents the videotape copy from playing normally.

BDS

ENGLISH

Supported Disc Formats

The BDS receiver can play the following types of discs (in 5"/12cm and 3"/8cm size):

BD-Video (single-layer or double-layer)

DVD-Video

DVD+R/+RW

DVD-R/-RW

CDDA (CD digital audio)

CD-R/RW

NOTE: The compatibility and performance of dual-layer discs is not guaranteed.

Supported Media Codecs

The BDS receiver can play media recorded in the following audio/video codecs:

MPEG 1, Layer 1

MPEG 2, Layer 2

MPEG 2, Layer 3

H.264

VC-

P3 (from CD-R/RW, DVD+R/+RW, BD-R/RE and USB)

JPEG (from CD-R/RW, DVD+R/+RW, BD-R/RE and USB)

DivX 3.x/4.x/5.x (from CD-R/RW, DVD+R/+RW and USB)

WMA (WMA9, CBR at 192kbps, VBR at 355kbps, DRM-free)

NOTE: Due to differences in the formats of certain discs, some discs may include a mix of

features, some of which are not compatible with the disc player. Similarly, although Blu-ray

Disc recordings and DVDs are capable of a wide range of features, not every disc includes

every capability of its system. For example, although the BDS receiver is compatible with

multi-angle discs, the multi-angle feature is possible only when the disc is specially encoded

for multiple-angle play. To make certain that a specific feature or soundtrack option is

available, please check the options noted on the disc jacket.

The playback capability of recordable discs may vary due to variations in the quality of the

disc and the recorder used to create the disc.

Loading and Playing Discs

Hold the disc horizontally when loading it, and insert it gently into the Disc slot. The disc

loading mechanism will take the disc and slide it into the unit.

Do not load more than one disc into the Disc slot.

Do not load the disc upside down.

After loading a disc into the player, press the Play button to begin playback.

Use the Play, Pause, Stop, Prev/Step, Next/Step, Search Down/Slow and Search Up/

Slow buttons to control disc playback. See Remote Control Functions, on page 8, for more

information about the functions of these buttons.

Playback Features

Repeat: When you are playing a Blu-ray Disc recording or DVD, pressing the Repeat button

cycles through the following repeat modes: Chapter, Title, All, Off. When you are playing a CD,

this button cycles through the following repeat modes: Track, All, Off.

A-B: When playing a Blu-ray Disc recording, DVD or music CD, pressing the A-B button places

the player into the A-B repeat mode. The first press sets the “A” repeat point; the second press

sets the “B” repeat point and begins repeating the section of the disc between the two points.

Pressing the A-B button while the player is in the A-B repeat mode takes the player out of

that mode. NOTE: This feature is disc-dependent. Not all Blu-ray Disc recordings support A-B

repeat.

Find: Pressing the Find button during disc playback activates the search function, allowing

you to jump to a specific location on the disc. You can find a location by title, chapter or time.

See Top Menu Button (below) for more information. NOTE: Not all discs allow searching by

title. On these discs, use the disc menu to change titles.

Options: Pressing the Options button displays any available options for the currently-

playing disc. Blu-ray Disc options include title, chapter, time display, audio options, angle

options and subtitle options. DVD options include title, chapter, time display, playback

modes, audio options and angle options. Audio CD options include track selection, time

display, playback modes, bitrate, instant search and instant replay.

Display Button: When playing Blu-ray Disc recordings and DVDs, pressing the Display

button toggles the information bar on and off.

Playback

Mode

Disc Type

& Encoding

Current

Title

Current

Chapter

Time

Display

Audio

Mode

“Find”

Indicators

Top Menu Button: Pressing this button displays the top menu for the Blu-ray Disc

recording or DVD that is currently playing. NOTE: This feature is disc-dependent. Not all DVDs

have top menus. If the DVD has no top menu, pressing the Top Menu button may display the

disc menu, depending on how the disc’s menu system was authored.

Popup Button: Pressing this button while playing a Blu-ray Disc recording displays the

pop-up menu. (DVDs will display the disc menu.) NOTE: If the Blu-ray Disc recording does not

support a pop-up menu, the disc menu will be displayed.

Bookmark Function: The bookmark function lets you mark up to 12 locations on the disc

currently playing. Press the Bookmark button to mark the current location on the disc. To play

the disc from one of your selected bookmark locations, hold the Bookmark button to display

the bookmark list. Use the Navigation left/right buttons to select the desired bookmark, and

press the OK button to play the disc from that location. NOTE: The bookmark function is disc-

dependent. Not all discs allow bookmark operation.

Programmed Play: This option lets you create a programmed playlist for a disc. The

program function works for CDs, DVDs and some Blu-ray Disc recordings (not all Blu-ray Disc

recordings allow programmed play).

Press the Program button. The Program screen will appea1. r.

Play Clear Stop

Track: 10

Track: 05

-- -- -- --

Page: 1/ Program

CD Track Total: 15

-- -- -- --

CLEAR EXIT

Press the OK button and use the Navigation Up/Down buttons to select the title on the 2.

disc (Blu-ray Disc/DVD) or track (CD) for your first program entry.

Using the Disc Player

BDS

Using the Disc Player, Listening to Your iPod/iPhone and Using the Radio

Press the right Navigation button and use the Navigation Up/Down buttons to select the 3.

chapter for your first program entry (Blu-ray Disc/DVD only).

Repeat Steps 2 – 3 for every entry in your programmed list.4.

When you’re finished programming your list, press the Play button to play the list.5.

The programmed list will remain active until the list has completed playing. Pressing the Stop

button twice or ejecting the disc deletes the programmed list.

BD-Live Interactivity

BD-Live interactivity is available on select Blu-ray Disc recordings. When you select the

BD-Live features from a disc’s menu, you may be able to download additional content or

other information via the Internet (through the Network connection).

If you have difficulty accessing the Internet while using a BD-Live disc, press the Settings

button and navigate to the Network Setup menu. Select “Test Connection.” If the

BDS receiver is able to access the Internet, then the computer server the BD-Live disc is

trying to access may be at fault. Check the disc jacket for more information or contact

the content provider. If the “Test Connection” function fails, contact your Internet service

provider (ISP) to obtain the correct settings for the BDS receiver’s IP Configuration menu. If

the problem persists, contact your ISP for further assistance.

Playing Music CDs

When the BDS is playing a music CD, the top bar shows the current playback mode icon, the

type of disc, the track currently playing, the number of total tracks on the disc and the time

display.

00 : 32 : 37

CDDA

1 / 15

TRACK

Playback

Mode

Disc

Type Current

Track

Total

Tracks

Time

Display

Listening to Your iPod/iPhone

Playing iPod Content

Insert your iPod or iPhone into The Bridge IIIP dock and press the BDS remote control’s iPod

button. If the Home screen is displayed, highlight iPod and press the OK button. The iPod Now

Playing screen will appear on the TV.

NOTE: The BDS receiver will not play video content stored on the iPod or iPhone.

In addition to playing the iPod through the system, pressing the iPod button places the

remote in the iPod control mode. Use the following remote control buttons to browse and

select content on your iPod and to control your iPod during playback:

Cursor and OK Buttons: Use these buttons to navigate and select items from the iPod

menus.

Exit Button: Pressing this button while playing content displays the iPod menu. Pressing

this button while a menu is displayed exits that menu and displays the previous screen.

Previous/Step Button: Press this button once to skip to the beginning of the current

track. Press the button twice to skip to the beginning of the previous track.

Next/Step Button: Press this button to skip to the beginning of the next track.

Search/Slow Reverse Button: Press this button to search backward through the current

track.

Search/Slow Forward Button: Press this button to search forward through the current

track.

Stop Button: Press this button to stop playback.

Play Button: Press this button to play the item appearing on the receiver’s display.

Pause Button: Press this button to pause the item that is playing. Pressing this button

while the iPod is paused will resume play.

Channel +/– Buttons: Pressing the Channel + button moves up ten items in the open

menu. Pressing the Channel – button moves down ten items in the active menu. Use these

buttons to navigate through long menu lists quickly.

Home Button: Pressing the Home button will switch the display to the Home screen while

you continue to hear the iPod content through the BDS system. To display the iPod Now

Playing screen again, press the Exit or Cursor Left button.

Red Button: Pressing the red button will toggle between the following modes: Random

play (albums), Random play (songs), Random off.

Repeat Button: Pressing the Repeat button will cycle the iPod between Repeat Song,

Repeat All, Repeat Off.

Receiver Information Display

When songs are playing, the display’s top line will scroll “Artist <Artist Name>,” “Song

<Song Name>.” The display’s bottom line will show the time according to the iPod time

display. When the iPod is in the menu mode, the receiver’s display will mimic the behavior of

the menu that is active on the iPod screen.

Using the Radio

Press the Radio button on the remote control, or if the Home screen is displayed on the TV,

highlight Radio and press the OK button. The Radio Now Playing screen will appear on the TV.

The top line of the receiver’s information display will show the currently tuned-in FM

frequency; the bottom line of the display will show the RDS information for the currently-

tuned station (if available).

In addition to playing the radio through the system, pressing the Radio button places the

remote in the radio-control mode. Use the following remote-control buttons to control the

receiver’s FM radio:

Cursor Up/Down Buttons: Pressing these buttons increases or decreases the tuned

frequency by 0.05MHz.

BDS

ENGLISH

Using the Radio, Listening to Audio Sources

and Playing Files from USB Devices and CD Data Discs

OK Button: Pressing this button sets the currently tuned-in frequency as a preset station.

See Setting and Recalling Preset Stations, below, for details.

Previous/Step Button and Next/Step Button: Pressing these buttons scans to the

next higher or lower receivable radio station.

Search/Slow Reverse Button and Search/Slow Forward Button: Pressing these

buttons scans to the next higher or lower receivable radio station.

Channel +/– Buttons: Pressing these buttons changes to the next higher or lower preset

station.

Number Buttons: Pressing a number button or a combination of number buttons will

change to the corresponding preset station. See Setting and Recalling Preset Stations, below,

for details.

Home Button: Pressing the Home button will switch the TV to the Home screen while the

radio continues to be heard through the BDS system. To display the Radio Now Playing screen

again, press the Exit or Cursor Left button.

Setting and Recalling Preset Stations

You can set up to 30 preset stations for easy recall.

To set the currently tuned-in station as a preset:

Press and hold the OK button for three seconds. The bottom line of the 1. receiver’s

information display will read “Set Preset _ _,” with the “_ _” characters flashing.

Use the number buttons to enter the preset number you want the current station saved 2.

to. If you do not enter a number within ten seconds, the display line will revert back to

the RDS text readout for the current station.

To listen to a preset station:

Press the Channel + or Channel – button. The radio will tune to the next higher or lower

preset station.

– OR –

Use the number buttons to enter the preset number.

For presets 1 – 9, press the corresponding 1 – 9 button.

For presets 10 and higher, press the “0” button, then use the number buttons to enter the

preset number.

Listening to Audio Sources

Press the Aux button on the remote control. The receiver will switch to the audio input that

was selected last. Subsequent presses of the Aux button will advance through the audio

inputs in the following order: Coaxial Digital, Optical Digital 1, Optical Digital 2, Analog L/R 1

and Analog L/R 2.

The Aux Input Now Playing screen will appear on the TV.

In addition to playing the Aux source through the system, pressing the Aux button places

the remote in the Aux-control mode. If you programmed the remote to control auxiliary

components (either by entering in a code number or teaching commands to the remote), the

remote will now operate according to that programming.

Lip Sync Delay: When playing an Aux source, audio and video processing circuitry may

create a slight delay between the picture and sound. Pressing the Options button lets you

adjust the audio delay to eliminate “lip sync” errors that may occur between the sound and

picture in video programs with sound playing through one of the receiver’s rear-panel audio

inputs. Use the Cursor Up/Down buttons to increase or decrease the audio delay until the

perceived lip-sync errors disappear and the sound and picture are properly synchronized.

Playing Files from USB Devices and CD Data Discs

Your BDS receiver can play MP3 (up to 320kbps bitrate) audio files, display JPEG photos and

show MPEG 1 (layer 1), MPEG 2 (layers 2 and 3), and DivX home theater profile audio/video

files stored on a USB device or a CD data disc.

IMPORTANT: Only media in the FAT32 file system are compatible with your

BDS receiver.

To access files on a device inserted into the receiver’s USB port, press the Home button and

select USB from the source list on the screen.

1 / 4 Exit Option

Type:USB

Size:595.375M

FS:FAT32

Home Menu

USB

FM Radio

Playlist

Settings

HOME OPTIONS

Regardless of the device’s file structure, the screen will first show three individual folders

named “Photo,” “Music” and “Video.” Select the type of media you want to play from these

three folders.

1 / 3 Exit Option

Type:Folder

USB

Photo

Music

Video

HOME OPTIONS

The screen will then show the device’s file structure. Selecting a folder will show all files of

the selected type of media in the folder. If there are files of the selected type in the device’s

root directory, they will also be shown.

To move up one directory level, press the Cursor Left button or select the arrow folder.

BDS

Playing Files from USB Devices and CD Data Discs

Viewing Photos

In the top directory, select “Photo.” Select a folder containing photo files and highlight a

photo file in the folder. A thumbnail of the highlighted photo will appear on the right of the

screen.

01 / 31 Exit Option

Type:JPG

Size:0.241M

Resolution:720x524

USB

Sunset

Connie1

Connie2

Stadium

AB Stand 1

HOME OPTIONS

Use these remote buttons while viewing photos:

Play Button: Press this button to begin a slide show that displays the photos in the current

folder or directory level (starting with the highlighted JPEG) for 15 seconds in the order they

appear in the folder.

Pause Button: Press this button to freeze the current photo on the screen. Press the Play

button to resume the slide show.

Stop Button: Press to end the slide show and return to the directory.

Next/Step and Previous/Step Buttons: Press these buttons to skip to the next or

previous photo file in the slide show or directory.

Cursor Up Button: Pressing this button while a photo is displayed rotates the photo 180°.

Pressing this button while the directory list is displayed highlights the previous item in the

directory.

Cursor Down Button: Pressing this button while a photo is displayed shows a mirror-

image reflection of the photo. Pressing this button while the directory list is displayed

highlights the next item in the directory.

Cursor Left Button: Pressing this button while a photo is displayed rotates the photo 90°

counterclockwise. Pressing this button while the directory list is displayed jumps to the next

higher directory level.

Cursor Right Button: Pressing this button while a photo is displayed rotates the photo 90°

clockwise.

Options Button: Pressing this button while a photo is displayed shows the Options menu,

which gives you the following options:

File: Select a file to view.

Play Mode: View files in their normal order, in random order (until you press the Stop

button) or in shuffle order (the screen displays each image in the folder one time in

random order, then returns to the directory).

Slide Show: Select fast (to display each image for five seconds), middle (to display each

image for 15 seconds) or slow (to display each image for 30 seconds) slide-show speed.

Transition: Select from various types of image-to-image transitions (fade, wipe, etc).

Pressing the Options button when a directory is displayed shows the Playlist Options box. See

Using Playlists, on page 29, for more information.

Thumbnail (yellow) Button: Pressing this button while playing a slide show displays

thumbnail images of all photos in the slide show. Use the Cursor and OK buttons to highlight

and select images to view.

1 / 25 PreviousMove Next

Zoom (blue) Button: Pressing this button during a slide show freezes an image and zooms

in 2x size. Additional presses of the button change the zoom to 3x, 4x, 1/2x, 1/3x and 1/4x

size.

Playing Music Files

In the top directory, select “Music.” Select a folder containing music files and highlight a

music file in the folder. Information about the highlighted file will appear on the right of the

screen.

01 / 10 Exit Option

Type:MP3

Total Time:03:29

Title:Beanwater Junction, Part 1

Artist:Jugalbandi

Album:Night Crazy

Genre:Progressive

USB

Beanwater Part 1

Laydown Delivery (Edit 1)

Madagascar Wombat

Night Crazy

The Lost Transit Center

HOME OPTIONS

Selecting a music file plays the file. If there are other music files in the folder that follow the

selected file, the receiver will play them in the order they appear on the on-screen display.

The following screen will appear while music files play:

Type: MP3

Total Time: 03:29

Title: Beanwater Junction, Part 1

Artist: Jugalbandi

Album: Night Crazy

Genre: Progressive

00 : 02 : 37

1 / 10

If a selected MP3 file has an album cover-art ID3 tag, the art will be displayed on the screen.

BDS

ENGLISH

Playing Files from USB Devices and CD Data Discs

and Using Playlists

Use the Play, Pause, Stop, Prev/Step, Next/Step, Search Down/Slow and Search Up/Slow

buttons to control music-file playback. See Remote Control Functions, on page 8, for more

information about the functions of these buttons.

When the BDS is playing music files from a USB device or CD data disc, the Repeat and

Options functions are slightly different from their functions when the unit is playing Blu-ray

Disc recordings, DVDs and music CDs:

Repeat Button: Pressing this button cycles through the following repeat modes: 1 (song),

All (folder), Off. The active repeat mode is indicated in the screen’s top bar.

Options Button: Pressing this button displays any available options for the song currently

playing:

File: Select a song to play.

Time: Display the track’s elapsed time or the track’s time remaining.

Play Mode: Plays songs in their normal order, in random order (until you press the Stop

button) or in shuffle order (plays each song in the folder one time in random order, then

returns to the directory).

Bitrate: Shows the bitrate of the song currently playing.

Advance: Performs a rapid audible search forward through the song.

Replay: Each press of the OK button jumps back ten seconds during play.

Transition: Select from various types of image-to-image transitions (fade, wipe, etc).

While playing music files from a USB device or data CD, you can also view photos that are on

the same media. Press the Home button while the music file is playing, navigate to a folder

containing photo files, and select a photo file to begin a slide show.

Playing Videos

In the top directory, select “Video.” Select a folder containing video files and highlight a video

file in the active folder.

01 / 7 Exit Option

Type:MPEG

USB

Dodgers Sweep Yanks in ‘63

Koufax’s Perfect Game

Gagne Saves 84th Game

Krik Gibson’s Homer

Bums Champs in 1955

HOME OPTIONS

The video will automatically play. If there are other video files in the folder, the BDS receiver

will play each one in the order they appear on the on-screen menu.

Use the Play, Pause, Stop, Prev/Step, Next/Step, Search Down/Slow and Search Up/Slow

buttons to control music file playback. See Remote Control Functions, on page 8, for more

information about the functions of these buttons.

When the BDS is playing video files from a USB device or CD data disc, the Repeat and Options

functions are slightly different from playing Blu-ray Disc recordings and DVDs:

Repeat Button: Pressing this button cycles through the following repeat modes: 1 (current

video), All (folder), Off.

Options Button: Pressing this button displays any available options for the song currently

playing:

File: Select a file to play.

Title: Select a title to play (if available).

Chapter: Select a chapter to play (if available).

Time: Display the elapsed time or the time remaining.

Play Mode: Plays videos in their normal order, in random order (until you press the Stop

button) or in shuffle order (plays each video in the folder one time in random order, then

returns to the directory).

Audio: Select audio options (if available).

Using Playlists

Because USB devices and CD data discs can contain large numbers of playable files, you can

create a playlist for each disc to help you to access selected files.

To Create a Playlist

NOTE: The procedure is the same for a CD-R playlist and a USB playlist.

Press the Home button. The Home menu will appear.1.

Select CD data disc or USB. The Photo, Music and Video folders will appear.2.

Select the type of file you want to create the playlist for. You can create a playlist for each 3.

type of file.

Search through the directory structure. When you see a file that you want to include 4.

in the playlist for that file type, highlight it and press the Options button. The playlist

options box will appear.

To add the item to the playlist, select “Add to Playlist.”5.

Repeat steps 4 – 5 for all items that you want to add to the playlist.6.

To create a playlist for a different file type, repeat steps 1 – 6; but in step 3, select a different

file type.

To Play a Playlist

Press the Home button. The Home menu will appear.1.

Select Playlist. The Photo/Music/Video screen will appear.2.

Select the file type of the playlist you want to play. The playlist will open.3.

Select the first item in the playlist and press the Play button. The playlist will play.4.

To repeat the playlist, press the Repeat button. You can repeat one item (“1”) or the entire

playlist (“All”).

BDS

Troubleshooting

If your BDS system isn’t performing the way you think it should, check to see if the problem is covered in this section before calling your dealer or contacting a harman kardon representative.

Problem Solution

The receiver won’t power up (the Power indicator is not lit): Check that the

receiver’s Power cord is properly plugged into the receiver’s AC Power Input

connector.

Check that the Power cord is plugged into a working AC outlet. If the outlet is controlled

by a switch, make sure the switch is set in the “On” position.

Check that the

receiver’s Main Power switch (located on the rear panel) is in the “On”

position.

Sound plays through the BDS system speakers, but there is no TV picture: Check the HDMI connection between the

receiver and the TV.

Check that the TV is turned on and is set to the proper input source.

Unplug the HDMI cable from the TV and plug it back in again.

There is no sound coming from just the subwoofer: Check that the subwoofer’s Power cord is plugged into a working AC outlet.

Check that the subwoofer’s Power switch is in the “On” position.

Check that the Subwoofer Level control is not turned all the way down (fully

counterclockwise).

Check that the audio connection between the

receiver and the subwoofer has been properly

made.

Check the

receiver’s Settings: Configuration menu to make sure that the subwoofer volume

has not been set at –10dB.

There is a constant hum in the sound: Check that all input cables are plugged all the way into their connectors.

Check that all cables are at least 10 ft (

3,5m) from fluorescent lights.

Check that all cable connectors are clean. If necessary, wipe them with a cloth slightly

moistened with alcohol.

Set the subwoofer’s Power switch to “Off.” If the hum goes away, there is a ground loop

between the subwoofer and the receiver. Plugging the subwoofer’s Power cord into the

same AC outlet that the receiver is plugged into should eliminate the ground loop.

The disc does not play: Check that the disc is inserted correctly (label side up).

Check that the disc is the correct type: BD-Video (single-layer or double-layer), DVD-Video,

DVD+R/+RW, DVD-R/-RW, CDDA (CD digital audio), CD-R/RW. Other disc types will not play.

Check that the disc surface is clean and not scratched.

There is noise or other interference in the picture while playing a Blu-ray Disc recording or

DVD:

Check that the disc surface is clean and not scratched.

The sound and picture are out of sync when listening to an Aux source: Press the Options button and perform the Lip Sync adjustment to bring the sound and

picture into synchronization.

Cannot tune in radio stations: Check that the FM antenna is correctly connected.

Adjust the antenna’s position. If necessary, use a powered FM antenna or an outdoor FM

antenna.

The receiver does not respond to remote-control commands: Replace all three remote-control batteries with fresh ones, and make sure that they are

installed with the correct polarity.

Hold the remote closer to the

receiver.

Check that the

receiver’s remote sensor is in the line of sight of the remote control.

The remote does not control programmed components (TV or video): Check that you have pressed the remote’s Aux button before trying to operate the

component.

Re-program and/or re-teach the component’s commands into the remote.

The Ø symbol appears on the screen when you press a remote-control button: The selected function is not permitted at the time you press the button.

The receiver does not respond to commands, or it behaves in an erratic way: Unplug the

receiver’s Power cord from the AC outlet, wait 30 seconds, then plug it back in.

You can find additional troubleshooting information in the FAQs link on the Support page at www.harmankardon.com.

BDS

ENGLISH

Aux Component Remote-Control Code List

TV/DVR

Manufacturer Code Numbers

ADMIRAL 0192 0123 1088 1105

AIWA 1110

AKAI 1011 1020 1022 1042 1053 1056

1089 1093

ALBA 1020 1040

ANAM 0122 0112 0109 0106 0045

AOC 0128 0123 0122 0037

APEX 2014 2016

ARC EN CIEL 1017 1019 1024 1056 1059

ARCAM 1017

ARISTONA 1022 1023 1025 1033 1047 1048

1060 1086

ASA 1012 1023 1088 1096 1201

AUDIOVOX 0012

AUTOVOX 1025 1044 1088

BANG & OLUFSEN 1088

BARCO 1202

BASICLINE 1020

BAUR 1075 1076 1077 1102

BEKO 1022

BLAUPUNKT 0084 1011 1075 1076 1077

BRANDT ELECTRONIQUE 1017 1019 1024 1056 1059

BRION VEGA 1023 1088 1203

BROCKSONIC 0206 0205

BUSH 1010 1020 1040 1043 1092

BUSH (UK) 1044

CENTURY 1023 1088

CITIZEN 0132 0128 0123 0045

COMTEL 1032

CONTEC 0045

CONTINENTAL EDISON 1017 1019 1024 1056 1059

CRAIG 0159 0158 0157 0045

CROSLEY 1023 1088

CROWN 0132 0045

CURTIS MATHES 0128 0123 0132

DAEWOO 0132 0128 0127 0119 0116 0114

0111 0108 0106 0105 0102 0087

1022

DANSAI 1022

TV/DVR

Manufacturer Code Numbers

DAYTRON 0132 0128

DECCA 1091 1032

DECCA (UK) 1038

DEGRAAF 1015

DISH NETWORK 2012

DIXI 1022

DUMONT 1201 1199 1096 1088 1023

DUMONT-FINLUX 1044 1012

DYNATECH 0063

DYNATRON 1022 1020

DYNEX 0014

ELECTROHOME 0132 0115

EMERSON 0205 0162 0159 0158 0157 0139

0132 0128 0123 0045 1195 1088

FUJITSU 0041 0042

FUNAI 0045

FUTURETECH 0045

GE 0163 0159 0145 0133 0128 0123

0121 0087 0029

GRUNDIG 0193

HALL MARK 0128

harman kardon 0201

HITACHI 0147 0144 0132 0128 0123

HYTEK 0016

INKEL 0120

JCPENNEY 0145 0132 0128 0123 0115

JENSEN 0019

JVC 0134 0087 0079

KEC 0045

KLH 0006

KTV 0162 0132 0123 0045

LG (GOLDSTAR) 0132 0128 0122 0110 0101 0002

0013 2004

LLOYTRON 0173 0172

LODGENET 0069

LXI 0148 0145 0077

MAGNAVOX 0148 0145 0132 0128 0123 0030

0040 2007 2008 2009 201 2011

MARANTZ 0148 0123 0115

Aux Component Remote-Control Code List

BDS

Aux Component Remote-Control Code List

TV/DVR

Manufacturer Code Numbers

MEMOREX 0128 0069

METZ 0084

MGA 0128 0123 0115

MITSUBISHI 0168 0167 0160 0128 0123 0115

0077

MTC 0176 0175

MOTOROLA 2005

NATIONAL 0182 0181 0180 0179 0177 0148

NEC 0125 0123 0121 0115 0010

OLEVIA 0007

OPTONICA 0077

ORION 0211 0210 0209 0208 0207

PANASONIC 0169 0148 0087

PHILCO 0148 0132 0128 0123 0115 0045

PHILIPS 0148 0145 0132 0128 0123 0036

0035 0034 0033

PIONEER 0128 0123 0024

POLAROID 0003 0004 0005 0006 0043

PORTLAND 0132 0128

PROSCAN 0133

PROTON 0165 0132 0128 0122 0059 0008

QUASAR 0087 0032

RADIO SHACK 0197 0196 0180 0132 0128 0045

RCA 0163 0161 0145 0133 0128 0123

0115 0021 2001 2012

REALISTIC 0196 0167 0045

RUNCO 0153 0152 0044 0046

SAMPO 0128 0123 0059

SAMSUNG 0145 0132 0128 0124 0022 0020

2003

SANYO 0054 0026

SCOTT 0132 0128 0045

SEARS 0145 0132 0128

SHARP 0132 0128 0077

SIEMENS 0084

SIGNATURE 0069

SONY 0212 0194 0136 0130 0117 0031

0028

SOUNDESIGN 0128 0045

SYLVANIA 0148 0145 0128 0123 0025

SYMPHONIC 0184

TV/DVR

Manufacturer Code Numbers

TANDY 0077

TATUNG 0063 2018

TECHNICS 0181

TECHWOOD 0128

TEKNIKA 0132 0128 0123 0115 0069 0045

TELERENT 0069

TERA 0156

THOMSON 0191 0190

TIVO 0051 0052 2020 2021

TMK 0128

TOSHIBA 0202 0129 0063

TOTEVISION 0132

VIDEO CONCEPTS 0160

VIDTECH 0128

VIEWSONIC 0011 0038 0039 0047

VIZIO 0001 0002

WARDS 0148 0132 0128 0069

WESTINGHOUSE 0017 0018 0023

YAMAHA 0128 0123

YORK 0128

ZENITH 0090 0069 2002 2008 2019

BDS

ENGLISH

Cable Tuners

Manufacturer Code Numbers

ABC 3011 3001

ALLEGRO 3111

AMERICAST 3212

ARCHER 3112

BELCOR 3113

BT CABLE 4007

CABLE STAR 3113 3033

CABLETIME 4008 4011 4012 4016

CITIZEN 3111

CLYDE CABLEVISION 4017

COMCAST 3007 4014

DESCAT CANAL 4010

DIGI LINK 3114

EAGLE 3186

EASTERN 3070 3066

EMERSON 3112

FILMNET 4018 4020

FOXTEL 4019

FRANCE TELECOM 4013 4021

G.I. 3097 3096 3017 3011 3001

GC ELECTRONICS 3113

GEC 4017

GEMINI 3060 3032

GENERAL 3210

GENERAL INSTRUMENT 3210

HANLIN 3208 3175 3117 3101 3100 3099

3056

HITACHI 3188 3001

JASCO 3111

JERROLD 3210 3188 3162 3097 3096 3073

3017 3011 3002 3001 4001 4022

LINSAY 3118

MACOM 3191

MAGNAVOX 3068 3019 3017

MOVIE TIME 3039 3035

NSC 3190 3035

OAK 3220 3197

Cable Tuners

Manufacturer Code Numbers

PACE 3179

PANASONIC 3214 3189 3177 3176 3053

PANTHER 3114

PHILIPS 3090 3085 3020 3019 3013 4023

PIONEER 3216 3215 3209 3171 3119 3041

3001 4002

RADIO SHACK 3213 3112 3111

RCA 3214 3053

RECOTON 3116

REGAL 3208 3101 3100 3099 3056

REMBRANT 3032

SAGEM 4028

SAMSUNG 3003 3186 3072 4002 4003 4024

SATBOX 4004

SCIENTIFIC ATLANTA 3222 3221 3203 3183 4005 4006

4025 4026

SEAM 3121

SIGNATURE 3188 3001

SPRUCER 3189 3177 3081 3053

STARCOM 3163 3011 3002

STARGATE 3120

TANDY 3024

TELECAPATION 3028

TELESERVICE 4011

TEXSCAN 3036

TFC 3122

TIVO 3029 3030 4029 4030

TOCOM 3205 3170

TUDI 4027

UNITED CABLE 3011 4001

UNIVERSAL 3113 3042 3039 3034 3033

VIDEOWAY 3211 3124

VIEWSTAR 3190 3089 3086 3053 3025 3019

VISIOPASS 4009

WESTMINSTER CABLE 4007

ZENITH 3219 3211 3125 3065

Aux Component Remote-Control Code List

BDS

Aux Component Remote-Control Code List

Satellite Tuners

Manufacturer Code Numbers

AIWA 6041

AKAI 6033

ALBA 6001 6011

AMSTRAD 6032

ANKARO 6021

ASTRO 6076 6077 6078 6079 6080 6081

6082 6083

BARCOM 6021

BIRDVIEW 5025

BLAUPUNKT 6038 6090

BUSH 6006 6048

BUSH (UK) 6053

CANAL 6013

CANAL DIGITAL 6013

CANAL PLUS (CANAL +) 6013

CHANNEL MASTER 5061 5025 5021 5020

CHAPARRAL 5051 5016 5015

CITOH 5060

DIRECTV 5009 5010 5014 6002 6003 6005

DISH NETWORK 5064

DRAKE 5081 5013 5018 5017 5013

DX ANTENNA 5083 5079 5052 5031

ECHOSTAR 5085 5084 5078 5077 5063 5053

5052 5097 5095 5064 6047

ELECTRO HOME 5092

FERGUSON 6006 6011 6024 6045 6048 6052

FINLUX 6009 6010

FOXTEL 6016

FTE 6080

FUBA 6014 6021 6047

FUJITSU 5034 5029 5024

GENERAL INSTRUMENT 5074 5068 5054 5003 5065 5023

2011 5003

GOODMANS 6011

GRUNDIG 6015 6038 6053 6067 6090

HITACHI 5055 5004 6006 6011

HOUSTON TRACKER 5063

HUGHES 5089 5037 5005 5006

Satellite Tuners

Manufacturer Code Numbers

HUMAX 6007

ITT 6067

ITT-NOKIA 6067

JANIEL 5066

JERROLD 5084 5068 5054

KATHREIN 6001 6033 6080 6090

KOSMOS 6080

KYOTO GMI ATLANTA 6043

LEGEND 5053

LEMON 6074

LOEWE 6075

LORENZEN 6061 6063 6064 6065 6074

MACOM 5071 5070 5069 5065 5017

MAGNAVOX 5073 5061

MARANTZ 6033

MASPRO 6006 6053

MEMOREX 5053

METZ 6090

MINERVA 6090

MITSUBISHI 5007 6090

MOTOROLA 5012 5019

MULTISTAR 6080

NEC 6030 6036 6046 6073

NETA P562 6040

NEXTWAVE 5023

NOKIA 6067

NORSAT 5073 6046

OPTIMUS 5066

OTTO VERSAND 6090

PACE 5087 5028 6024 6048 6053 6063

6064 6067

PACE MSS SERIES 6067

PANASONIC 5069 5066 5057 5053 6024 6031

PANSAT 5020

PERSONAL CABLE 5018

PHILIPS 5075 6019 6021 6024 6032 6033

6053

PICO 5007

BDS

ENGLISH

Satellite Tuners

Manufacturer Code Numbers

PREMIERE 6008

PRESIDENT 5004 5081

QUADRAL 6066 6067 6068 6069 6070 6071

QUELLE 6090

RADIOLA 6053

RADIX 6047

RCA 5090 5065 5039 5001 5058 5058

REALISTIC 5080 5049

SAMSUNG 5042 5022 5026 6027 6032 6080

SAT 6027

SATELLITE SERVICE 5088 5035

SCIENTIFIC ATLANTA 5039 5056

SCHNEIDER 6053

SIEMENS 6038 6090

SKY 6006

SKY MASTER 6033

SKYLAB 6021

SONY 5005 5062

Satellite Tuners

Manufacturer Code Numbers

STAR CHOICE DBS 5059

STARCAST 5047

SUPER GUIDE 5023 5027

TECHNISAT 6047

TEECOM 5009 5093 5091 5090 5033 5030

TELECOM 6041

TELEFUNKEN 6083

THORN-FERGUSON 6023 6045 6048 6052 6053 6063

TOPPFIELD 6011

TOSHIBA 5070 5062 5061 5060 5026 5002

UNIDEN 5080 5079 5066 5003 5089 5083

5054 5051 5050 5049 5048 5032

VIASAT 6012

VORTEC 6032 6042

WISI 6004 6022 6026 6027 6047

ZEHNDER 6027 6080

ZENITH 5088 5019 5094 5087 5085 5084

Specifications

BDS

Specifications

BDS 5 receiver (BDS 800, BDS 700, BDS 600 systems)

BDS 2 receiver (BDS 400, BDS 300 systems)

Audio Section

Continuous average power, stereo mode (BDS 5, BDS 2): 65 watts per channel, 20Hz – 20kHz, @ <0.1% THD, both channels driven into 6 ohms

Multichannel power (BDS 5 only): 65 watts per channel, 20Hz – 20kHz, @ <0.1% THD, into 6 ohms

Input sensitivity/impedance (line inputs): 250mV/46k ohms

Signal-to-noise ratio (IHF-A): –90dB

Frequency response @ 1W (±0.5dB): 20Hz – 20kHz

Slew rate: 40V/μsec

FM Tuner Section

Frequency range: 87.5MHz – 108.0MHz (US and EU)

Usable sensitivity IHF: >14dBf

Signal-to-noise ratio (mono/stereo): –60dB/–55dB

Distortion (mono/stereo): 0.3%/0.5%

Stereo separation: –45dB @ 1kHz

Image rejection: –70dB

IF rejection: –80dB

Disc Player Section

Supported disc formats: 5-inch (12cm) or 3-inch (8cm) BD-Video (single-layer or double-layer), DVD-Video, DVD+R/+RW, DVD-R/-RW,

CDDA (CD digital audio), CD-R/RW discs

Region code (BD/DVD): A/1 (USA); B/2 (EU)

Audio formats: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS Digital, DTS-HD High Resolution Audio, DTS-HD Master Audio,

PCM, WMA (DRM-free version only): WMA9, CBR @ 192kbps, VBR @ 355kbps; MP3: 32kbps – 320kbps bitrates,

including variable-bitrate encoding

Still-image format: JPEG

Video signal system: NTSC (USA) or PAL (EU)

Frequency response: 20Hz – 20kHz ±0.5dB

Signal-to-noise ratio: –90dB (A-weighted)

Dynamic range: 90dB (16-bit)

THD @ 1kHz (DVD/CD): 0.1%

Wow & flutter: Below measurable limits

Video Section

Television format: NTSC or PAL (selectable)

HDMI version: 1.3a, with 30/36-bit Deep Color

General

Power requirement: 110 – 240V AC, 50/60Hz

Power consumption: 110W maximum (BDS 5), 70W maximum (BDS 2); <1W standby

Dimensions (H x W x D): 102mm x 401mm x 260mm (4" x 15-25/32" x 10-1/4")

Weight: 6.5kg (14.3 lb) (BDS 5); 6.4kg (14 lb) (BDS 2)

Depth measurement does not include terminal connections. Height measurement includes feet and chassis.

BDS

ENGLISH

Specifications

SAT-TS60 Satellites

(BDS 800 and BDS 400 systems)

CEN-TS60 Center

(BDS 800 system)

Midrange transducer: Two x 3" (75mm) flat-panel drivers, video-shielded Two x 3" (75mm) flat-panel drivers, video-shielded

High-frequency transducer: 1" (25mm) CMMD® Lite dome, video-shielded 1" (25mm) CMMD Lite dome, video-shielded

Recommended power: 10 – 120 watts 10 – 150 watts

Impedance: 8 ohms 8 ohms

Sensitivity: 86dB (2.83V/1m) 83dB (2.83V/1m)

Connector type: Push-spring terminal Push-spring terminal

Enclosure type: Sealed Sealed

Dimensions (H x W x D): 299mm x 110mm x 88mm

(11-25/32" x 4-11/32" x 3-15/32")

(Height measurement includes removable stands)

110mm x 272mm x 88mm

(4-11/32" x 10-11/16" x 3-15/32")

Weight: 1.5kg (3.3 lb) 1.5kg (3.3 lb)

SAT-TS11 Satellites

(BDS 300 system)

CEN-TS11 Center

(BDS 700 system)

SAT-TS7 Satellites

(BDS 700 system)

Midrange transducer: Two x 3" (75mm) cones, video-shielded Two x 3" (75mm) cones, video-shielded 3" (75mm) cone, video-shielded

High-frequency transducer: 3/4" (19mm) dome, video-shielded 3/4" (19mm) dome, video-shielded 1/2" (13mm) dome, video-shielded

Recommended power: 10 – 120 watts 10 – 120 watts 10 – 80 watts

Impedance: 8 ohms 8 ohms 8 ohms

Sensitivity: 86dB (2.83V/1m) 86dB (2.83V/1m) 86dB (2.83V/1m)

Connector type: Push-spring terminal Push-spring terminal Push-spring terminal

Enclosure type: Sealed Sealed Sealed

Dimensions (H x W x D): 243mm x 100mm x 92mm

(9-9/16" x 3-15/16" x 3-5/8")

102mm x 241mm x 92mm

(4" x 9-1/2" x 3-5/8")

167mm x 100mm x 92mm

(6-5/8" x 3-15/16" x 3-5/8")

Weight: 1.0kg (2.2 lb) 1.0kg (2.2 lb) 0.6kg (1.3 lb)

SB 10 Soundbar

(BDS 600 system)

Low-frequency transducer

Left:

Right:

Center:

3" (76mm) paper cone, video-shielded

Two 3" (76mm) paper cones, video-shielded

High-frequency transducer

Left:

Right:

Center:

3/4" (19mm) silk dome, video-shielded

Recommended power

Left and Right:

Center:

60 watts (each)

100 watts

Impedance: 8 ohms

Sensitivity: 84dB (2.83V/1m) (each channel)

Connector type: Push-spring terminal

Enclosure type: Sealed

Dimensions (H x W x D): 110mm x 920mm x 89mm

(4-5/16" x 36-1/4" x 3-1/2")

Weight: 3.67kg (8.1 lb)

HKTS200SUB and HKTS210SUB

Subwoofer (all systems)

Low-frequency transducer: 8" (200mm) down-firing cone

Amplifier power: 200 watts

Frequency response: 45Hz – 200Hz (–6dB)

Controls: Volume, phase, bass boost

Connections: LFE input, left and right RCA line-level inputs

Enclosure type: Sealed

Power requirement: 120V, 60Hz (USA)

220V – 240V, 50/60Hz (EU)

Power consumption: <1W (standby); 200W (maximum)

Dimensions (H x W x D): 353mm x 267mm x 267mm

(13-29/32" x 10-1/2" x 10-1/2")

(Height measurement includes feet)

Weight: 9.0kg (19.8 lb)

www.harmankardon.com

Harman Consumer, Inc.

8500 Balboa Boulevard, Northridge, CA 91329 USA

516.255.4545 (USA only)

Made in P.R.C.

Features, specifications and appearance are subject to change without notice.

harman kardon and CMMD (patent nos. 6,327,372 and 6,404,897) are trademarks of HARMAN International Industries, Incorporated,

registered in the United States and/or other countries. Blu-ray Disc and BD-Live are trademarks of the Blu-ray Disc Association. DivX®, DivX

Certified® and associated logos are registered trademarks of DivX, Inc., and are used under license. ABOUT DIVX VIDEO: DivX® is a digital-

video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information

and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in

order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu.

Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Manufactured under license from

Dolby Laboratories. Dolby is a trademark of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;

5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks,

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. iPod and iPhone

not included. Java, Java Powered and the Java Steaming Coffee Cup logo are trademarks or registered trademarks of Sun Microsystems,

Inc., or its subsidiaries in the United States and other countries. Microsoft, Windows and Windows Media are registered trademarks of

Microsoft Corporation in the United States and/or other countries. WMA (Windows Media Audio) is a proprietary file format developed by

Microsoft. This item incorporates copy-protection technology that is protected by U.S. patents and other intellectual-property rights of Rovi

Corporation. Reverse engineering and disassembly are prohibited.

Part No. 950-0321-001

Harman Kardon 950 0321 001 Users Manual

8095db67-f38b-42bf-8.. 8095db67-f38b-42bf-8c5b-04df4169f804

950-0321-001 to the manual 8095db67-f38b-42bf-8c5b-04df4169f804

Navigation menu

Versions of this User Manual:

Views

Navigation