Harman Kardon Avr 330 Users Manual 525 Quick Start Guide
AVR 330 to the manual 43facf68-f489-4dde-8678-39f48e0ab194
2015-01-25
: Harman-Kardon Harman-Kardon-Avr-330-Users-Manual-235856 harman-kardon-avr-330-users-manual-235856 harman-kardon pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
AVR 330 QUICK-START GUIDE Thank you for purchasing a Harman Kardon AVR 330. This Quick-Start Guide will help you with a basic system installation. For detailed information on any step, please refer to the Owner’s Manual pages referenced in this guide. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 330, as well as for the important safety information it contains. CENTER SPEAKER (Green) FRONT LEFT SPEAKER FRONT RIGHT SPEAKER (Red) (White) Figure 1 – Speaker Placement SURROUND RIGHT SPEAKER The colors shown for each speaker correspond to the matching output terminal connection on the back of the AVR 330 (see page 7). (Gray) SUBWOOFER (Purple) Connections Color Guide Audio Connections Left Right SURROUND LEFT SPEAKER Front Center Surround Subwoofer Surround Back (Blue) SURROUND BACK LEFT SPEAKER (Brown) SURROUND BACK RIGHT SPEAKER (Tan) Digital Audio Connections Coax Optical Video Connections Step 1. Place your speakers in the listening room (see page 17). Composite S-Video Match the colored jacks on the AVR 330 to the appropriate jacks on your source equipment or speakers. The colors are standardized, but not all equipment or connectors use them. SPEAKER PLACEMENT AVR 330 QUICK-START GUIDE LINE IN/SUB/LFE SUBWOOFER + _ FRONT RIGHT SPEAKER + _ FRONT LEFT SPEAKER + _ + SURROUND BACK RIGHT SPEAKER _ SURROUND BACK LEFT SPEAKER + _ SURROUND RIGHT SPEAKER + _ SURROUND LEFT SPEAKER + _ CENTER SPEAKER Figure 2 – Speaker Connections Step 2. Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver and black (–) to black (–) (see page 15). Step 3. Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer. You may adjust the settings on the subwoofer later as needed (see page 15). Figure 3 – How To Use the Binding-Post Speaker Terminal FM Antenna AM Antenna CD PLAYER L R Optical Coax AUDIO RECORDER Figure 4 – Audio Connections REC/IN Dashed lines (– – – –) indicate coax and optical digital audio connections. Choose either type (but not both) for each digital audio source. PLAY/OUT Step 4. Connect AM and FM antennas (Fig. 4) (see page 15). Step 5. Connect source components, as shown in Figures 4 and 5, and the Device Connection Options chart on the back of this guide (see pages 15–16). AUDIO connections: Right channel (red) on source to right (red) on AVR, and left channel (white) on source to left (white) on AVR. DIGITAL AUDIO connections, if available: Choose either coax (orange) to coax (orange) OR optical to optical for each device. The Coax 1 input defaults to the DVD player, but may be reassigned. Assign the other digital inputs and outputs as appropriate for your equipment (see Step 7). VIDEO connections: Choose component (Y/Pb/Pr – green/blue/ red), composite (yellow) or S-Video (4-pin) for each video source. Connect the component, composite and S-Video Monitor outputs to your Video Monitor (TV). Switch your TV set’s input to match the type of video used for the currently selected source. Step 6. Plug all components into AC power outlets. The outlets on the back of the AVR 330 should be used only for low-current products, such as CD or DVD players, and the total should not exceed 100 watts. Basic Receiver Configuration Step 7. Select digital inputs: If your DVD is connected to Coax 1, no adjustment is needed. For any other digital-device connections, use the front-panel Digital Select button and the arrow buttons to select an optical or coax digital input (see pages 18 and 26). Step 8. Select a surround mode: Press the Surround Mode button on the front panel to select Dolby ® Pro Logic ® II – Movie. (You may select other modes later as you become familiar with the AVR 330; see pages 19–20 and 26–29.) Step 9. Configure speakers: No action is needed if you have five “small” satellite-type speakers and a subwoofer. Otherwise, press the Speaker button and then the Set and arrow buttons to select the correct speaker choices for your system (see pages 20–22). TM to set output levels: Set the Balance to 12 Step 10. Use o’clock, and the Volume to –10dB. Sit in the listening position and hold the remote in front of you at shoulder level, pointing at the AVR 330. Press the SPL button for 3 seconds, and release it when the LED flashes amber. Press “5” or “7” to indicate the number of speakers (not including the subwoofer). Hold the remote steady until the process is completed (see pages 23–24). Step 11. Your system is configured – sit back and enjoy! SPEAKER AND AUDIO CONNECTIONS R TV or Projector VIDEO Video S-Video Cable box or Satellite Receiver Set-Top Box (Video 3) Component Video Y In/Rec Pb Pr L OUT R Video Optical Coax S-Video IN Out/Play Component Video L R Video S-Video Figure 5 – Video Connections Y Dashed lines (– – – –) indicate coax and optical digital audio connections. Choose either type (but not both) for each digital audio source. Dotted lines (••••) indicate component, composite or S-Video connections. Component video is the preferred connection when available, but you may use any of the three types (but not more than one). When component, composite and S-Video sources are connected to the AVR you must also connect all outputs from the AVR to your TV. Pb Optical Pr Coax DVD PLAYER Device Connection Options: Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4, Coax 3 and Optical 3 inputs are on the front panel of the receiver. Device Input Name Audio Input Connections Audio Output Connections Video Connections CD Player CD CD L/R Inputs, Optical Digital 1 or 2, or Coaxial Digital 1 or 2 Not required Not required DVD Player DVD Coaxial Digital 1 or 2, Optical Digital 1 or 2, or DVD L/R Inputs Not required DVD Component, Composite or S-Video VCR Video 1 Video 1 L/R Inputs Video 1 L/R Outputs Video 1 Composite or S-Video Input and Output Cable Box or Satellite Receiver Video 3 Video 3 L/R Inputs, Optical Digital 3*, or Coaxial Digital 3* Inputs Not required Video 3 Composite or S-Video Input Audio Recorder Tape Tape L/R Inputs, Optical Digital 1/2** or Coaxial Digital 1/2** Inputs Tape L/R Outputs, Digital Optical** or Coaxial Outputs** Not required TV or Projector Not applicable Not required Not required Monitor-Out Component, Composite and/or S-Video * Check with your cable company to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections if it is not. ** Digital audio recorders only. ® ® Power for the Digital Revolution. VIDEO CONNECTIONS 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2003 Harman International Industries, Incorporated Part No. CQE1A200Z VCR (Video 1) L
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2003:07:25 15:26:23-04:00 Modify Date : 2003:07:25 15:26:23-04:00 Page Count : 4 Creation Date : 2003:07:25 19:26:23Z Mod Date : 2003:07:25 19:26:23Z Producer : Acrobat Distiller 5.0.5 for Macintosh Author : Lin, Siong Metadata Date : 2003:07:25 19:26:23Z Creator : Lin, Siong Title : AVR 525 Quick Start GuideEXIF Metadata provided by EXIF.tools