Harman BDS580 Blu-RAY DISC SYSTEM User Manual BDS 580 280 MANUAL
Harman International Industries, Inc Blu-RAY DISC SYSTEM BDS 580 280 MANUAL
Harman >
User Manual
BDS280/BDS580
Blu‐rayDiscSystem
Quick‐StartGuide
BDS
ThankyouforchoosingaHarmanKardonproduct!
Thisquick‐startguidecontainsalltheinformationyouneedto
connectandsetupyournewBDSBlu‐rayDiscsystem.
Toconserveournationalresources,yourBDSsystemdoesnot
includeaprintedowner’smanual.Anowner’smanualcontaining
completeinformationaboutoperatingallofyournewsystem’s
featuresisavailableonourwebsite.Gotowww.harmankardon.com
anddownloadtheBDSBlu‐rayDiscSystemOwner’sManual.
Connections
ConnecttheSpeakers
CAUTION:BeforemakinganyconnectionstotheBDSsystem,
ensurethatthesystem’sACcordisunpluggedfromthesystemand
theACoutlet.Makingspeakerconnectionswiththesystem
pluggedinandturnedoncoulddamageyourspeakers.
YourBDSsystemhascolorcodedspeakerterminals:
BDS280
whiteleftchannel(+)
redrightchannel(+)
black(‐)onbothchannels
BDS580
whitefrontleft(+)
redfrontright(+)
bluesurroundleft(+)
graysurroundright(+)
greencenter(+)
black(‐)onbothchannels
Mostspeakersuseredtodenotethe(+)terminalandblackforthe(‐)
terminal.Besuretoconnecteachspeakeridentically:(+)onthe
speakerto(+)onBDSand(‐)onthespeakerto(‐)onBDS.Miswiring
oneormorespeakersresultsinthinsound,weakbass,andapoor
stereoimage.
BDS
Connectthesubwoofer
ConnecttheFMradioantenna
ConnectaTVorvideodisplay
NOTE:IfyourTVsupportsHDMIAudioReturnChannel(ARC)andyouaccess
digitalchannelsfromyourTV’sbuilt‐intuneroryouhaveothersources
alreadyconnecteddirectlytoyourTV,youcanfeedtheirsoundtotheBDS
systemviatheHDMIMonitorOutconnector’sAudioReturnChannel,and
theywillnotrequireadditionalconnectionstothesystem.
Connecttoyourwiredhomenetwork
Note:ifyouhaveawirelesshomenetwork,skipthisstepfornow.
YouwillusetheBDSsettingsmenustoconnecttoitonceyou’ve
completedwiredconnections.
BDS
ConnectinganHDMIsourcedevice
BDS
Connectingacomponentvideosourcedevice
[Insertnewdiagramshowingtoconnectcomponent
sourcestotheTVandthenuseARC]
Connectinganopticaldigitalaudiosourcedevice
Connectingacoaxialdigitalaudiosourcedevice
Connectingananalogaudiosourcedevice
ConnectingtoACpower
BDSSystemRearPanel
BDS
SettinguptheBDS
Installthebatteriesintheremotecontrol
Turnonthesystem
Setthesystem’smainpowerswitchtothe“ON”position.
BDSSystemRearPanel
TosetupyourBDSsystem,youwillusetheremotecontrolto
navigatethroughtheon‐screenmenusandtomakeselectionsfrom
them.
Usethecursorup/downbuttonstonavigatethroughthemenu
list.Whenanitemishighlighted,awhiteborderwillappear
aroundit.
Toselectahighlighteditem,presstheOKbutton.Thescreen
willchangedependingonyourselection.
Toreturntothepreviousscreen,presstheBackbutton.
BDS
InitialSetup
WhenyouturnyourBDSsystemonforthefirsttime,theon‐screen
menuwilldisplaytheInitialSetupscreens.Thefirstscreenallows
youtosetthelanguageyouwantBDSmenustouse.
HighlightyourchoiceandpresstheOKbutton,thentheInitialSetup
introductionscreenwillappear.
PresstheOKbutton,andtheInitialSetupTVresolutionscreenwillappear.
HighlightyourchoiceandpresstheOKbutton.Next,theInitialSetupaspect‐
ratioscreenwillappear.
16:9Fullisthebestchoiceformostdisplays.Highlightyourchoiceandpress
theOKbutton.Next,theInitialSetupspeakerpackagescreenwillappear.
ThissettingenablesprocessingintheBDSsystemthatwillmaximizeyour
system’saudioperformance.IfyouareusingaHarmanKardonspeaker
packagewithyourBDSsystem,selectit’smodelnumberfromthelist.If
you’renotusingaHarmanKardonspeakerpackage,select“Other.”
ConfiguringBDSforyourspeakersystem
BeforeyouuseyourBDS,youneedtoconfigureittoworkwithyour
particularspeakersystem.HarmanKardon’sEzSet/EQsystemuses
thesuppliedEzSet/EQmicrophonetoperformthisimportantstep
automatically.Beforebeginning,besureyouhavecorrectly
connectedyourspeakerstotheBDSsystem.IMPORTANT:Pressthe
remotecontrol“Disc”buttonbeforeperformingtheEzSet/EQ
procedure.TheEzSet/EQprocedureisonlyavailablewhentheDisc
inputisselected.
1.PlugthesuppliedEzSet/EQmicrophoneintotheBDS’sfrontpanel
headphoneconnector.
Microphoneinput
2.Placethemicrophoneatearheightinyourmainlisteningposition.
3.Presstheremotecontrol’sHomebutton.Thesystem’sHome
MenuscreenwillappearontheTV.
BDS
4.UsethecursorandOKbuttonstohighlightandselectSettings.
TheGeneralSettingsmenuwillappear.
5.UsethedowncursorbuttontoselectSoundandpressOK.Next,
usethedowncursortoselectEzSet/EQandpressOK.
6.Remainsilentwhilethetestnoiseplaysthroughthespeakers.As
thetestnoisecirculatesamongthespeakers,thescreenwillshow
whichspeakerisbeingtested.
7.Whenthetestingprocessiscomplete,the“Testing…”messageon
thescreenwillchangeto“Alltestsdone!”
8.PresstheBackbuttontoexittheEzSet/EQtestprocedure.
NOTE:Ifthetestfails,the“Testing…”messageonthescreenwill
changeto“EzSet/EQfailed.Makesureallspeakersareconnected
andtheroomisquietlythentryagain.”PresstheBackbutton,make
sureallspeakersarecorrectlyconnectedandperformthetestagain
fromstep5.Makesuretheroomremainssilentduringthetest.
UsingtheBDS
PresstheremotecontrolHomebuttontodisplaytheHomeMenu
screen:
Theavailablesourcesareshowninagrid.Ifadischasbeeninserted
intothesystem’sbuilt‐indiscslot,itwillbeavailableinthetopleft.
IfyouhaveinsertedaUSBdeviceintothesystem’sUSBport,it’s
contentcanbeaccessedbytheMusic,Photo,andVideosourceson
thetoprow.
NOTE:Digitalandanalogaudiosourcesconnectedtothereceiver’s
rear‐panelopticaldigital,coaxialdigital,andanaloginputswillnot
appearonthelistbutcanbeselectedusingtheAuxinputsource.
Toselectasourcefromthegrid,usethecursorup/down/left/right
buttonstohighlightthedesiredsource,thenpresstheOKbutton.
NOTE:Therearetwopagesofavailablesources.Toaccessmore
sources,pressthecursordownbuttonwhilehighlightinganyofthe
bottomrowsourceicons.
SomesourcesarealsodirectlyaccessiblebytheSourceSelector
sectionoftheremotecontrol.
ForcompleteinformationaboutusingallofyourBDSsystem’s
features,downloadtheBDS280/BDS580Blu‐rayDiscSystem
Owner’sManualfromwww.harmankardon.com.
BDS
FOR ALL PRODUCTS:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install this apparatus in accordance with the
manufacturer’s instructions.
8. Do not install this apparatus near any heat
sources such as radiators, heat registers,
stoves or other apparatus (including
amplijers that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third grounding
prong. The wide blade or the third prong
is provided for your safety. If the provided
plug does not jt into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked
on or pinched, particularly at plugs,
convenience receptacles and the point
where they exit from the apparatus.
11. Use only attachments/accessories
specijed by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket or table specijed by the
manufacturer or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to Pualijed service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
or the apparatus has been exposed to rain
or moisture, does not operate normally or
has been dropped.
15. Do not expose this apparatus to dripping
or splashing, and ensure that no objects
jlled with liquids, such as vases, are
placed on the apparatus.
16. To disconnect this apparatus from the AC
mains completely, disconnect the power-
supply cord plug from the AC receptacle.
17. The mains plug of the power-supply cord
shall remain readily operable.
18. Do not expose batteries to excessive heat
such as sunshine, jre or the like.
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THE LIGHTNING FLASH WITH AN
ARROWHEAD SYMBOL, WITHIN AN
EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF
UNINSULATED “DANGEROUS VOLTAGE”
WITHIN THE PRODUCT’S ENCLOSURE THAT
MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK
TO PERSONS.
THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE
(SERVICING INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE PRODUCT.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION
FCC AND IC STATEMENT FOR
USERS (USA AND CANADA
ONLY)
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions (1 This device may not cause harmful
interference, and (2 this device must accept any
interference received, including interference that
may cause undesired operation.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
q Reorient or relocate the receiving antenna.
q Increase the separation between the equipment
and receiver.
q Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
q Consult the dealer or an experienced radio/TV
technician for help.
Caution: Changes or modijcations not expressly
approved by HARMAN could void the user’s
authority to operate the equipment.
FOR PRODUCTS THAT TRANSMIT RF
ENERGY:
FCC AND IC INFORMATION FOR USERS
This device complies with Part 15 of the FCC
rules and Industry Canada license-exempt RSS
210. Operation is subject to the following two
conditions: (1 This device may not cause harmful
interference and (2 this device must accept any
interference received, including interference that
may cause undesired operation.
FCC/IC Radiation Exposure Statement
This equipment complies with FCC/IC RSS-
102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should
be installed and operated with minimum distance
20cm between the radiator & your body.
FOR PRODUCTS WITH RADIO
RECEIVERS THAT CAN USE
AN EXTERNAL ANTENNA (USA
ONLY):
CATV (CABLE TV) OR ANTENNA
GROUNDING
If an outside antenna or cable system is connected
to this product, be certain that it is grounded so as
to provide some protection against voltage surges
and static charges. Section 810 of the National
Electrical Code (NEC, ANSI/NFPA No. 70-1984,
provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection
to grounding electrodes and requirements of the
grounding electrode.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (cable
TV system installer’s attention to article 820-40
of the NEC, which provides guidelines for proper
grounding and, in particular, specijes that the
cable ground shall be connected to the grounding
system of the building, as close to the point of
cable entry as possible.
IMPORTANT SAFETY INSTRUCTIONS
FOR CD/DVD/BLU-RAY DISC™
PLAYERS:
CAUTION: This product uses a laser system. To
prevent direct exposure to the laser beam, do not
open the cabinet enclosure or defeat any of the
safety mechanisms provided for your protection.
DO NOT STARE INTO THE LASER BEAM. To
ensure proper use of this product, please read
the owner’s manual carefully and retain it for
future use. Should the unit require maintenance
or repair, please contact your local JBL service
center. Refer servicing to qualijed personnel only.
FOR ALL EU COUNTRIES:
FOR PRODUCTS THAT INCLUDE AUDIO
OUT
Prevention of hearing loss
CAUTION: Permanent hearing loss may occur
if earphones or headphones are used at high
volume for prolonged periods of time.
For France, the products have been tested to
comply with the Sound Pressure Level requirement
laid down in the applicable NF EN50332-1:2000
and/or EN50332-2:2003 standards as required
by French Article L.5232-1.
Note: To prevent possible hearing damage, do not
listen at high volume levels for long periods.
WEEE NOTICE
The Directive on Waste Electrical and Electronic
Equipment (WEEE, which entered into force as
European law on 13th February 2003, resulted
in a major change in the treatment of electrical
equipment at end-of-life.
The purpose of this Directive is, as a jrst priority,
the prevention of WEEE, and in addition, to
promote the reuse, recycling and other forms of
recovery of such wastes so as to reduce disposal.
The WEEE logo on the product or on its box
indicating collection for electrical and electronic
equipment consists of the crossed-out wheeled
bin, as shown below.
This product must not be disposed of or dumped
with your other household waste. You are liable
to dispose of all your electronic or electrical
waste equipment by relocating over to the
specijed collection point for recycling of such
hazardous waste. Isolated collection and proper
recovery of your electronic and electrical waste
equipment at the time of disposal will allow us
to help conserving natural resources. Moreover,
proper recycling of the electronic and electrical
waste equipment will ensure safety of human
health and environment. For more information
about electronic and electrical waste equipment
disposal, recovery, and collection points, please
contact your local city center, household waste
disposal service, shop from where you purchased
the equipment, or manufacturer of the equipment.
ROHS COMPLIANCE
This product is in compliance with Directive
2011/65/EU of the European Parliament and
of the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in
electrical and electronic equipment.
FOR PRODUCTS THAT INCLUDE
BATTERIES
EU Batteries Directive 2006/66/EC
A new battery directive 2006/66/EC on Battery
and Accumulator replacing directive entered
into force on the 26th September 2008. The
directive applies to all types of batteries and
accumulators (AA, AAA, button cells, lead acid,
rechargeable packs including those incorporated
into appliances except for military, medical and
power tool applications.
The directive sets out rules for collection,
treatment, recycling and disposal of batteries, and
aims to prohibit certain hazardous substances
and to improve environmental performance of
batteries and all operators in the supply chain.
Instructions for Users on Removal,
Recycling and Disposal of Used Batteries
To remove the batteries from your equipment
or remote control, reverse the procedure
described in the owner’s manual for inserting
batteries.
For products with a built-in battery that lasts for
the lifetime of the product, removal may not be
possible for the user. In this case, recycling or
recovery centers handle the dismantling of the
product and the removal of the battery. If, for any
reason, it becomes necessary to replace such
a battery, this procedure must be performed by
authorized service centers.
In the European Union and other locations, it is
illegal to dispose of any battery with household
trash. All batteries must be disposed of in an
environmentally sound manner. Contact your
local waste-management ofjcials for information
regarding the environmentally sound collection,
recycling and disposal of used batteries.
WARNING: Danger of explosion if battery is
incorrectly replaced. To reduce risk of jre or
burns, don’t disassemble, crush, puncture,
short external contacts, expose to temperature
above 60¦C (140¦F, or dispose of in jre or water.
Replace only with specijed batteries.
The symbol indicating ‘separate collection’ for all
batteries and accumulators shall be the crossed-
out wheeled bin shown below:
In case of batteries, accumulators and button
cells containing more than 0.0005 % mercury,
more than 0.002 % cadmium or more than
0.004 % lead, shall be marked with the chemical
symbol for the metal concerned: Hg, Cd or Pb
respectively. Please Refer to the below symbol:
FOR ALL PRODUCTS EXCEPT THOSE
WITH WIRELESS OPERATION:
HARMAN International hereby declares that
this equipment is in compliance with the EMC
2004/108/EC Directive, LVD 2006/95/EC Directive,
ErP 2009/125/EC Directive and RoHS 2011/65/
EU Directive. The declaration of conformity may be
consulted in the support section of our Web site,
accessible from www.jbl.com.
FOR ALL PRODUCTS WITH WIRELESS
OPERATION:
HARMAN International hereby declares that this
equipment is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC, ErP 2009/125/EC
Directive and RoHS 2011/65/EU Directive The
declaration of conformity may be consulted in the
support section of our Web site, accessible from
www.jbl.com.
www.jbl.com
© 2012 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Blu-ray Disc is a trademark of the Blu-ray Disc Association.
Features, specijcations and appearance are subject to change without notice.
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
IMPORTANT SAFETY INSTRUCTIONS
ThisequipmentcomplieswithFCC'sandIC'sRFradiationexposurelimitssetforthforan
uncontrolledenvironment.Theantenna(s)usedforthistransmittermustbeinstalledand
operatedtoprovideaseparationdistanceofatleast20cmfromallpersonsandmustnotbe
collocatedoroperatinginconjunctionwithanyotherantennaortransmitter.Installersmust
ensurethat20cmseparationdistancewillbemaintainedbetweenthedevice(excludingits
handset)andusers.