Harman MD51W JBL PlayUp Portable Wireless Speaker for Nokia User Manual TempConfidential Nokia MD 51W MUNAL

Download:
Mirror Download [FCC.gov]
Document ID	1770860
Application ID	SAYEap+i28aar2USlsZvfA==
Document Description	TempConfidential_Nokia_MD-51W_MUNAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.97kB (299679 bits)
Date Submitted	2012-08-21 00:00:00
Date Available	2012-10-06 00:00:00
Creation Date	2012-07-10 09:59:42
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2012-07-11 09:59:44
Document Title	TempConfidential_Nokia_MD-51W_MUNAL
Document Creator	AH Formatter V5.3 R1 (5,3,2011,0425) for Windows
Document Author:	mode

JBL PlayUp Portable Wireless Speaker for Nokia MD-51W
Issue 1
2
Contents
Contents
About your speaker
About Bluetooth connectivity
Get started
Keys and parts
Charge the battery
Switch the speaker on
Pair your device
Pair and connect
Pair the speaker using NFC
Pair the speaker manually
Clear the pairings
Listen to music
Play music
Connect to another device on the go
Support
Product and safety information
© 2012 Nokia. All rights reserved.
About your speaker
About your speaker
With the Nokia MD-51W wireless speaker, you can listen to music in high-quality audio
from your phone or other compatible device, such as a music player. A single speaker
fills your room with music. You can connect to another device on the go without
stopping the music. You can also use a standard audio cable (3.5 mm) to connect your
device to the audio connector in the speaker. The product comes with an audio cable
stored in the speaker.
Read this user guide carefully before using the product. Also, read the user guide for
the device that you connect to the product.
Warning:
This product may contain small parts. Keep them out of the reach of small children.
The surface of this product is nickel-free.
About Bluetooth connectivity
You can use Bluetooth to make a wireless connection to other compatible devices,
such as mobile phones.
Devices do not need to be in direct line-of-sight, but they must be within 10 metres
(33 feet) of each other. The connection may be affected by obstructions such as walls
or other electronic devices.
© 2012 Nokia. All rights reserved.
4
Get started
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the
following profiles: A2DP and AVRCP. Check with the manufacturers of other devices
to determine their compatibility with this device.
Get started
Keys and parts
10
11
Cable storage cover
Battery cover
Power key
Charger connector
Audio connector (3.5 mm)
Volume up key
Battery status indicator
Volume down key
NFC area
Power and Bluetooth status indicator
Bluetooth key
Parts of the product are magnetic. Metallic materials may be attracted to the product.
Do not place credit cards or other magnetic storage media near the product, because
info stored on them may be erased.
The surface of this product is nickel-free.
© 2012 Nokia. All rights reserved.
Get started
Charge the battery
Before using the speaker, you must install and charge the battery. To install the
battery, open up the cable storage cover and the battery cover, line the battery
contacts and insert the battery.
When the battery charge of the speaker is low, the battery status indicator flashes
red. When the battery is charging, the light stays on.
Plug the charger into a wall outlet.
Connect the charger cable to the charger connector on the speaker.
When the battery is full, first disconnect the charger from the speaker, then from
the wall outlet.
You can also use a compatible USB cable to charge the battery. Charging over USB
can take longer to charge. If you connect the speaker using a non-powered hub,
charging may not work. Your speaker charges more quickly when connected to a wall
outlet.
To charge over USB, you can only use the USB connection on the speaker.
To remove the battery, open the battery cover, and gently remove the battery.
Check the battery charge
When the speaker is on, press the power key quickly to check the battery charge. The
battery status indicator lights show the battery status. A green light shows there is
enough battery charge. If the light is yellow, you may need to recharge the battery
soon. If the light is red and flashes, recharge the battery.
© 2012 Nokia. All rights reserved.
6
Pair your device
Switch the speaker on
Press and hold the power key until you hear the speaker start up.
If you've never paired the speaker with a device, or you've cleared the pairings, the
speaker goes into pairing mode automatically, and the Bluetooth status indicator
starts to flash slowly.
If you've already paired the speaker with one or more devices, the speaker connects
to the last device it was used with.
If the speaker is not connected to a device within 30 minutes, the speaker goes into
standby mode, and the Bluetooth status indicator light turns white.
Pair your device
Pair and connect
Before using your speaker with a phone or other compatible device for the first time,
you must pair and connect it to the device.
You can only connect the speaker to one device at a time, but you can connect to
another device on the go.
When the speaker is paired, the Bluetooth status indicator light is blue.
If the connected device goes out of Bluetooth range, the speaker tries to reconnect
for 3 minutes. When the device comes back into range, the speaker reconnects
automatically.
You can also use a standard audio cable (3.5 mm) to connect your device to the audio
connector in the speaker. When you connect your speaker and device using a wired
connection, Bluetooth is switched off automatically, and the Bluetooth indicator light
turns white.
Pair the speaker using NFC
With Near Field Communication (NFC), you can easily pair and connect your speaker
to your phone or other compatible device.
If your phone supports NFC, switch NFC on, and touch the NFC area of the speaker
with the NFC area of your phone. The speaker connects to your device automatically.
Some devices may ask for confirmation on connection. For details on NFC, see your
phone user guide.
© 2012 Nokia. All rights reserved.
Pair your device
Before using NFC, unlock the phone screen and enable its NFC function.
If your phone doesn't support NFC, pair the speaker manually.
To end a Bluetooth connection, tap the speaker.
Pair the speaker manually
You can pair your speaker manually with Bluetooth.
Switch on your speaker and phone or other compatible device.
If you've previously paired your speaker with another device, press and hold for
2 seconds.
Within 3 minutes, switch Bluetooth on in your phone, and search for Bluetooth
devices.
Select the speaker from the list of found devices.
If asked, enter the passcode 0000.
Clear the pairings
You can clear the paired devices list on your speaker.
Switch the speaker off, then press and hold
The white and red indicator lights alternate.
and the power key for 5 seconds.
After you've cleared the pairings, you must pair the speaker before you can use it
again. When you switch on the speaker, pairing mode goes on automatically.
© 2012 Nokia. All rights reserved.
8
Listen to music
Listen to music
Play music
Connect a phone or other compatible device to your speaker, and play your favourite
music.
Adjust the speaker volume
To increase the volume, press the volume up key. To decrease it, press the volume
down key.
Tip: You can adjust the volume from both the speaker and your phone, if your phone
has this feature.
Warning:
Continuous exposure to high volume may damage your hearing. Listen to music at a
moderate level.
Connect to another device on the go
Take turns with your friends in playing your music. You can change the connected
device on the go, without pausing the music.
While playing music from your connected device, press and hold for 2 seconds.
© 2012 Nokia. All rights reserved.
Support
Pair and connect to another device. The music continues playing until pairing is
complete.
Play music on the device just connected.
Support
When you want to learn more about how to use your device, or if you're unsure how
your device should work, read the user guide thoroughly.
If you have an issue, restore the original factory settings.
If your issue remains unsolved, contact Nokia for repair options.
Product and safety information
Take care of your device
Handle your device, battery, charger and accessories with care. The following suggestions help you protect your warranty
coverage.
•
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode
electronic circuits. If your device gets wet, remove the battery, and allow the device to dry.
•
Do not attempt to open the device.
•
Unauthorised modifications may damage the device and violate regulations governing radio devices.
•
Do not drop, knock, or shake the device.
•
Only use a soft, clean, dry cloth to clean the surface of the device.
•
Switch off the device and remove the battery from time to time for optimum performance.
Recycle
Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way
you help prevent uncontrolled waste disposal and promote the recycling of materials. Check how to recycle your Nokia
products at www.nokia.com/recycling.
Crossed-out wheeled-bin symbol
The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and
electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This
requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. For more
environmental information, see the product Eco profile at www.nokia.com/ecoprofile.
Batteries and chargers
Battery and charger info
Your device is intended for use with a BL-4F rechargeable battery. Nokia may make additional battery models available for
this device. Always use original Nokia batteries.
© 2012 Nokia. All rights reserved.
10
Product and safety information
This device is intended for use when supplied with power from the following chargers: AC-3. The exact Nokia charger model
number may vary depending on the plug type, identified by E, X, AR, U, A, C, K, B, or N.
Battery safety
Always switch the device off and unplug the charger before removing the battery. When you unplug a charger or an accessory,
hold and pull the plug, not the cord.
When your charger is not in use, unplug it from the electrical plug and the device. Do not leave a fully charged battery
connected to a charger, as overcharging may shorten the battery’s lifetime. If left unused, a fully charged battery will lose
its charge over time.
Always keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime
of the battery. A device with a hot or cold battery may not work temporarily.
Accidental short-circuiting can happen when a metallic object touches the metal strips on the battery, for example, if you
carry a spare battery in your pocket. Short-circuiting may damage the battery or the connecting object.
Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Recycle when
possible. Do not dispose as household waste.
Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. If a battery leaks, do not let battery liquid
touch skin or eyes. If this happens, immediately flush the affected areas with water, or seek medical help.
Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other
liquids. Batteries may explode if damaged.
Use the battery and charger for their intended purposes only. Improper use, or use of unapproved batteries or incompatible
chargers may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. If you believe
the battery or charger is damaged, take it to a service centre for inspection before continuing to use it. Never use a damaged
battery or charger. Only use the charger indoors.
Additional safety information
Implanted medical devices
Manufacturers of medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a wireless
device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential
interference with the medical device. Persons who have such devices should:
•
Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device.
•
Switch the wireless device off if there is any reason to suspect that interference is taking place.
•
Follow the manufacturer directions for the implanted medical device.
If you have any questions about using your wireless device with an implanted medical device, consult your health care
provider.
© 2012 Nokia. All rights reserved.
11
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-303
product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity can be found at
http://www.nokia.com/global/declaration/declaration-ofconformity.
© 2012 Nokia. All rights reserved.
Nokia, Nokia Connecting People, and the Nokia Original
Accessories logo are trademarks or registered trademarks
of Nokia Corporation.
Reproduction, transfer, distribution, or storage of part or
all of the contents in this document in any form without the
prior written permission of Nokia is prohibited. Nokia
operates a policy of continuous development. Nokia
reserves the right to make changes and improvements to
any of the products described in this document without
prior notice.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Nokia is
under license.
To the maximum extent permitted by applicable law, under
no circumstances shall Nokia or any of its licensors be
responsible for any loss of data or income or any special,
incidental, consequential or indirect damages howsoever
caused.
The contents of this document are provided "as is". Except
as required by applicable law, no warranties of any kind,
either express or implied, including, but not limited to, the
implied warranties of merchantability and fitness for a
particular purpose, are made in relation to the accuracy,
reliability or contents of this document. Nokia reserves the
right to revise this document or withdraw it at any time
without prior notice.
The availability of products may vary by region. For more
info, contact your Nokia dealer. This device may contain
commodities, technology or software subject to export
laws and regulations from the US and other countries.
Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
This device complies with part 15 of the FCC rules and
Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation. Your
device may cause TV or radio interference (for example,
when using a device in close proximity to receiving
equipment). If you require assistance, contact your local
service facility. Any changes or modifications not expressly
approved by Nokia could void the user's authority to
operate this equipment.
NOTE: FCC Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna
or transmitter.
/Issue 1 EN

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Annotate, Fill forms, Extract, Print high-res
Author                          : mode
Create Date                     : 2012:07:10 09:59:42+03:00
Modify Date                     : 2012:07:11 09:59:44+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : mode
Title                           : 
Creator Tool                    : AH Formatter V5.3 R1 (5,3,2011,0425) for Windows
Metadata Date                   : 2012:07:10 10:05:34+03:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:a5c108a4-8003-44a1-874f-84399f45d5f5
Instance ID                     : uuid:0d0608d9-68f1-44a9-beb9-26977c573cc1
Page Mode                       : UseOutlines
Page Count                      : 11

EXIF Metadata provided by EXIF.tools