Harman REVELB8SUB Transmitter box User Manual B8 T UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3521223
Application ID	aLLRpshf52kKNS7VwQOWuQ==
Document Description	Users Manual-1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	379.74kB (4746714 bits)
Date Submitted	2017-08-22 00:00:00
Date Available	2017-08-23 00:00:00
Creation Date	2017-08-17 08:48:54
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2017-08-17 08:57:05
Document Title	(B8-T) UserMan.pdf
Document Creator	Adobe InDesign CC 2017 (Macintosh)
Document Author:	A316134

Revel B8 Wireless Subwoofer
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
15. Do not expose this apparatus to dripping or splashing and ensure that no
objects lled with liquids, such as vases, are placed on the apparatus.
16. The mains plug is used as disconnect device, the disconnect device shall
remain readily operable.
17. WARNING: Apparatus shall be connected to a MAINS socket outlet with a
protective earthing connection.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specied by
the manufacturer or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufcient magnitude to constitute a risk of electric
shock to persons.
Warning: To reduce the risk of electric shock, do not
remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to qualied personnel.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.
WARNING: To reduce the risk of re or electric shock, do not
expose this apparatus to rain or moisture. Operating Temperature
35˚C.
14. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, or the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.
TABLE OF CONTENTS
Congratulations and Thank You for purchasing your new RevelÂŽ B8 Wireless Subwoofer.
About RevelÂŽ............................................................................ 2
Please take the time to read the following installation and setup information in order to
optimize the performance of your wireless subwoofer.
Introduction .............................................................................. 3
Subwoofer and Transmitter Controls ....................................... 3
Placing The Subwoofer ............................................................ 4
Connecting The Subwoofer...................................................... 5
Operating Your Subwoofer....................................................... 6
Specications ........................................................................... 7
ABOUT REVELÂŽ
Since 1996, RevelÂŽ has stood at the forefront of loudspeaker design and performance.
Backed by Harman International’s world leading research and design facilities, Revel®
loudspeakers benet from cutting-edge resources such as:
• Multiple large anechoic chambers which allow for precise testing and
measurements.
• A multi-channel listening lab for double-blind, position independent listening
tests.
• A laser interferometer that enables detailed driver and cabinet analysis.
• Finite element analysis, utilized for advanced loudspeaker modeling.
• A stereo lithography apparatus, which rapidly “builds” tooled parts.
Revel B8 Wireless Subwoofer
Owner’s Manual
INTRODUCTION
INCLUDED ITEMS
THANK YOU FOR CHOOSING THIS REVEL PRODUCT!
Wireless Subwoofer
Transmitter Module
Your new Revel B8 200-watt powered wireless subwoofer incorporates an 8" (200mm)
down-ring cone transducer and a built-in, high-performance, 200-watt amplier that
delivers the powerful, dynamic and accurate low-frequency performance that makes your
lm soundtracks and music come alive. The subwoofer receives its audio signal from
the transmitter module via wireless technology, so you can place it anywhere in your
room without having to run an audio cable. And to maximize connection flexibility, the
subwoofer also features wired connections.
Transmitter Power Supply
We’re confident that this Revel subwoofer will provide every note of enjoyment that you
expect – and that when you think about purchasing additional audio equipment, you will
once again choose Revel products.
Power Supply AC Cord
(varies with region)
This owner’s manual contains all the information you need to set up, connect and adjust
your new subwoofer. For more in-depth information, go to our Web site:
www.revelspeakers.com.
LFE Cable
Trigger Cable
SUBWOOFER REAR-PANEL CONTROLS
Phase Switch
Bass Boost Switch
Power On
Mode Switch
Subwoofer
Level Control
TRANSMITTER UNIT
REAR-PANEL CONNECTIONS
AND CONTROLS
Input Mode Switch
External Trigger Input
DC 5V
Line-Level LFE In Connector
Line-Level L/R In Connector
WIRELESS
CODE
R INPUT L
Wireless Code Switch
Power
Connector
Power Switch
Revel B8 Wireless Subwoofer
Owner’s Manual
Power Cord
Wireless
Code
Switch
Input
Connectors
SUBWOOFER UNIT
TRANSMITTER UNIT
Phase switch: This switch determines whether the subwoofer transducer’s piston-like
action moves in and out in phase with the satellite speakers. If the subwoofer were to
play out of phase with the satellite speakers, the sound waves from the satellites could
cancel out some of the subwoofer’s sound waves, reducing bass performance and sonic
impact. This phenomenon depends in part on the placement of all the speakers in the
room. In most cases, the Phase switch should be left in the “Normal” position. However,
it does no harm to experiment, and you can leave the Phase switch in the position that
maximizes bass response and impact.
Power connector: Plug the transmitter power supply into this connector and into a
working AC outlet.
Bass Boost switch: Set this switch to “On” to enhance the subwoofer’s low-frequency
performance. Set this switch to “Off” for normal low-frequency performance.
Input connectors: Connect the supplied LFE cable from your receiver’s or processor’s
subwoofer output to either of the transmitter unit's Input connectors.
Power On Mode switch: When this switch is set in the “Auto” position and when
the Power switch is set to “On,” the subwoofer will automatically turn itself on when it
receives an audio signal and will enter the standby mode after it has received no audio
signal for about 15 minutes. When this switch is set in the “On” position, the subwoofer
will remain on whether or not it is receiving an audio signal. An LED on the subwoofer’s
top panel indicates whether the subwoofer is in the on or standby state:
• When the LED glows white, the subwoofer is turned on.
• When the LED is not illuminated, the subwoofer is in the standby mode. When the
Power switch is set to “Off,” the LED will not be illuminated, no matter what setting
the Power On Mode switch is in.
Subwoofer Level control: Use this control to adjust the subwoofer’s volume. Turn
clockwise to increase the volume; turn counterclockwise to decrease the volume.
Input Mode switch: When this switch is in the “Normal” setting, the input signal from
the Line-Level L/R In connectors is active. When this switch is in the “LFE” setting, the
input signal from the Line-Level LFE In connector is active.
External Trigger Input connector: Use the mini plug of the supplied combination LFE
and trigger cable to connect the External Trigger Input connector to the trigger output
of another compatible component. Whenever the subwoofer detects a trigger signal
between 3V and 30V (AC or DC), its amplier will turn on. The amplier will turn off after
the trigger signal ceases, even when the Power On Mode switch is in the “Auto” position.
Line-Level LFE In connector: The signal from this connector bypasses the subwoofer’s
internal low-pass crossover. When you’re connecting the subwoofer to the dedicated
subwoofer output of a receiver/processor that has its own low-pass crossover network,
use the Line-Level LFE In connector. You must also set the subwoofer’s Input Mode switch
in the “LFE” position.
Line-Level L/R In connectors: The signals from these connectors pass through the
subwoofer’s internal low-pass crossover. When you’re connecting the subwoofer to the
preamp or subwoofer outputs of a receiver/processor that does not have its own low-pass
crossover network, use both Line-Level L/R In connectors. You must also set the Input
Mode switch in the “Normal” position. If your receiver/processor has only one subwoofer
output, you can use either the L or R connector.
Wireless Code switch: This switch selects between four different channels for the
wireless subwoofer signal.
Wireless Code switch: This switch selects between four different channels for the
wireless signal.
IMPORTANT: Be sure to set the transmitter unit’s Wireless Code switch to the
same channel that you set the subwoofer’s Wireless Code switch. See Wireless
Code Settings, on page 7, for more information.
PLACING THE SUBWOOFER
The performance of a subwoofer is directly related to its placement in the listening room
and its physical position relative to the other speakers in the system.
While it is true that in general our ears do not hear directional sounds at the low
frequencies where subwoofers operate, when installing a subwoofer within the limited
confines of a room, the reflections, standing waves and absorptions generated within the
room will strongly influence the performance of any subwoofer system. As a result, the
specic location of the subwoofer in the room does become important to the amount and
quality of bass that is produced.
For example, placing the subwoofer next to a wall generally will increase the amount of
bass in the room; placing it in a corner (1) generally will maximize amount of bass in the
room. However, corner placement can also increase the destructive effect of standing
waves on bass performance. This effect can vary depending on the listening position –
some listening positions may yield very good results while others may have far too much
(or too little) bass at certain frequencies.
In many rooms, placing the subwoofer along the same plane as the left and right speakers
(2) can produce the best integration between the sound of the subwoofer and that of
the left and right speakers. In some rooms, the best performance could even result from
placing the subwoofer behind the listening position (3).
We strongly recommend that you experiment with placement before choosing a nal
location for your subwoofer. One way you can determine the best location for the
subwoofer is by temporarily placing it in the listening position and playing music with
strong bass content. Move around to various locations in the room while the system is
playing (putting your ears where the subwoofer would be placed), and listen until you nd
the location where the bass performance is best. Place the subwoofer in that location.
1.
TV
Front Left
Speaker
2.
Center
Speaker
Front Right
Speaker
IMPORTANT: Be sure to set the subwoofer’s Wireless Code switch to the same
channel that you set the transmitter module's Wireless Code switch. See Wireless
Code Switches, on page 7, for more information.
Power switch: Set this switch in the “On” position to turn the subwoofer on. The
subwoofer will then be either on or in the standby mode, depending on the setting of the
Power On Mode switch.
Power Cord (non-detachable): After you have made and veried all the connections
described in this manual, plug this cord into an active, unswitched electrical outlet for
proper operation of the subwoofer. DO NOT plug this cord into the accessory outlets
found in some audio components.
Surround Left
Speaker
Surround Right
Speaker
3.
Revel B8 Wireless Subwoofer
Owner’s Manual
CONNECTING THE SUBWOOFER
CONNECTING THE SUBWOOFER TO A RECEIVER OR PREAMP/
PROCESSOR WITH A DEDICATED SUBWOOFER OUTPUT
WIRELESS:
DC 5V
WIRELESS
CODE
Power
Supply
AC Cord
R INPUT L
Use either
connector
Power
Supply
LFE Cable
(supplied)
SUBWOOFER/
LFE OUT
Set Input Mode
Switch to “LFE”
1. Connect the supplied LFE cable from your receiver’s or processor’s subwoofer output to
either of the transmitter unit’s Input connectors.
If your receiver/processor does not have a dedicated subwoofer output but does have
a set of preamp-level (volume-controlled) line outputs, use a stereo audio cable (not
supplied) to connect them to both of the transmitter unit’s Input connectors
2. Connect the transmitter power supply to the Power connector, and into a working AC
outlet,
3. Set the Wireless Code switches on the transmitter unit and subwoofer to the same
position.
WIRED:
As an alternative to wireless operation, you can connect the subwoofer conventionally,
using the supplied audio cable.
NOTE: You can use both the wireless and the wired methods to connect the subwoofer to
two different sources. However, if you play both sources at the same time the subwoofer
will play bass from them both.
LFE Cable (supplied)
Use this installation method for receivers and preamps/processors that have a dedicated
subwoofer output.
Use the supplied LFE cable to connect the subwoofer’s Line-Level LFE In connector to
the dedicated subwoofer output (or LFE output) of your audio/video receiver or preamp/
processor. Set the subwoofer’s Input Mode switch in the “LFE” position.
Configure your receiver or preamp/processor’s setup menu for “Subwoofer On.” After
you have made and verified all connections, plug the subwoofer’s AC Power Cord into a
working AC outlet.
Revel B8 Wireless Subwoofer
Owner’s Manual
CONNECTING THE SUBWOOFER TO A RECEIVER OR PREAMP/
PROCESSOR WITH LINE OUTPUTS
CONNECTING THE SUBWOOFER TO A TRIGGER VOLTAGE SOURCE
Trigger Cable
(supplied)
Set Input Mode
Switch to “Normal”
LINE-LEVEL
OUTPUTS
Stereo RCA Cable (not supplied)
The subwoofer will automatically turn on if it receives a trigger voltage at its External
Trigger Input connector and will enter the Standby mode when the voltage ceases.
Use this installation method for receivers and preamp/processors that do not have a
dedicated subwoofer output but do have preamp-level (volume-controlled) line outputs.
If your preamp/processor or another audio/video component has a trigger-voltage
connection that supplies between 3V and 30V (AC or DC), connect it to the subwoofer’s
External Trigger Input connector. If the component’s trigger-voltage connection has a
3.5mm mini jack, you can use the supplied Trigger cable to make the connection.
Connect one end of a stereo RCA cable (not supplied) to the receiver’s or preamp’s line
outputs and the other end to the subwoofer’s Line-Level L/R In connectors. Set the
subwoofer’s Input Mode switch in the “Normal” position.
NOTE: Do not connect the subwoofer’s External Trigger input connector to a remote
control output (IR Out) of your home cinema system or surround receiver. Doing so could
lead to malfunction.
After you have made and verified all connections, plug the subwoofer’s AC Power Cord
into a working AC outlet.
OPERATING YOUR SUBWOOFER
TURNING THE SUBWOOFER ON AND OFF
Set the subwoofer’s Power switch to the “On” position.
If you set the Power On Mode switch to “Auto,” the subwoofer will automatically turn
itself on when it receives an audio signal, and it will go into the standby mode after it has
received no audio signal for 15 minutes. The subwoofer’s LED will glow white when the
subwoofer is on and will not be illuminated when the subwoofer is in the standby mode.
If you set the Power On Mode switch to “On,” the subwoofer will remain on at all times.
The subwoofer’s LED will glow white.
If you connect the subwoofer’s External Trigger Input connector to a trigger-voltage
source, the subwoofer will turn on whenever a trigger voltage is present and will enter
the standby mode after the trigger voltage ceases, regardless of the position of the Power
On Mode switch.
If you will be away from home for an extended period of time, or if you will not be using
the subwoofer for an extended period, switch the Power switch to the “Off” position.
Revel B8 Wireless Subwoofer
Owner’s Manual
WIRELESS OPERATION
When the wireless transmitter receives an audio signal from the source, it will
immediately turn on and the status LED will change to flashing green or solid green:
Green (flashing): Transmitter is on but has not established a link with the wireless
subwoofer
Green (solid): Transmitter is on and has already established a link with the wireless
subwoofer.
Red: Standby (no signal detected, transmitter off)
The transmitter will automatically enter the Standby mode after no audio signal is
detected from the source for approximately 10 minutes.
SPECIFICATIONS
Low-frequency transducer:
8" (200mm) down-ring cone
Amplier power:
200 watts (continuous), 400 watts (peak)
Frequency response:
45Hz – 200Hz (–6dB)
Controls:
Volume, phase, bass boost
Connections:
LFE (RCA-type); left and right line-level
(RCA-type)
Enclosure type:
Sealed
WIRELESS CODE SETTINGS
External trigger input voltage:
3 – 30 volts, AC or DC
The Wireless Code selectors on the transmitter unit and subwoofer must be set to the
same position for the system to function correctly.
Subwoofer power requirement:
120V, 60Hz (USA); 220V – 240V,
50/60Hz (EU)
Subwoofer power consumption:
<0.5W (standby); 243W (maximum, 120V);
261W (maximum, 230V)
Subwoofer dimensions (H x W x D):
13-29/32" x 10-1/2" x 10-1/2"
(353mm x 267mm x 267mm)
Subwoofer weight:
19.8 lb (9kg)
SUBWOOFER ADJUSTMENTS: VOLUME
Transmitter power requirement:
100 – 240V AC, 50/60Hz
Use the Subwoofer Level Control to set the subwoofer’s volume. Turn the knob clockwise
to increase the subwoofer’s volume; turn the knob counterclockwise to decrease the
subwoofer’s volume.
Transmitter power consumption:
<0.5W
Transmitter unit dimensions
(H x W x D):
1-3/8" x 5" x 3-1/2"
(35mm x 127mm x 89mm)
Transmitter unit weight:
0.26 lb (117g)
In the unlikely event that there is interference when operating the system, or if you have
more than one Revel B8 operating, you may change the channel at which the system
operates. Set the Wireless Code selectors on one subwoofer’s transmitter module and
subwoofer to one of the other three positions.
You can also set up a maximum of two subwoofers to receive audio from the a single
transmitter by setting the Wireless Code selectors on the transmitter and both of the
subwoofers to the same position.
Notes on Setting Subwoofer Volume:
Sometimes the ideal subwoofer volume setting for music is too loud for lms, while the
ideal setting for lms is too quiet for music. When setting the subwoofer volume, listen
to both music and films with strong bass content and find a “middle ground” volume level
that works for both.
If your subwoofer always seems too loud or too quiet, you may want to place it in a
different location. See Placing the Subwoofer, on page 4, for more information.
SUBWOOFER ADJUSTMENTS: PHASE
The Phase switch determines whether the subwoofer’s piston-like action moves in and
out in phase with the satellite speakers. If the subwoofer were to play out of phase with
the satellite speakers, the sound waves from the satellites could cancel out sound waves
from the subwoofer, reducing bass performance and sonic impact. This phenomenon
depends in part on the placement of all the speakers in the room.
Although in most cases the Phase switch should be left in the “Normal” position, there
is no absolutely correct setting for the Phase switch. When the subwoofer is properly in
phase with the satellite speakers, the audio will be clearer, have maximum impact and
make percussive sounds like drums, piano and plucked strings sound more lifelike. The
best way to set the Phase switch is to listen to music that you know well and set the
switch in the position that gives drums and other percussive sounds maximum impact.
SUBWOOFER ADJUSTMENTS: BASS BOOST
When set to the “On” position, the Bass Boost switch enhances low-frequency
performance, resulting in bass with more impact, which you may prefer while watching
movies or listening to music. There is no harm in experimenting with this control. Setting
the switch to the “Off” position will return normal low-frequency performance to your
system.
Revel B8 Wireless Subwoofer
Owner’s Manual
LIMITED WARRANTY
Revel loudspeakers are warranted against defects. The duration of a warranty depends on the laws in the country in which it was purchased.
Your local Revel retailer can help you determine the duration and coverage of your warranty.
For more information please visit: REVELSPEAKERS.COM
Please visit REVELSPEAKERS.COM for additional language support on the user manual.
Veuillez visiter REVELSPEAKERS.COM pour obtenir le mode d’emploi en d’autres langues.
Para obter o manual do usuĂĄrio em outros idiomas, acesse REVELSPEAKERS.COM
Ga naar REVELSPEAKERS.COM voor de handleiding in andere talen.
GĂĽ til REVELSPEAKERS.COM for bruksanvisning pĂĽ flere sprĂĽk.
͏ͻ͵ͲͬͪͶͼͺͯͫͽͯͼͻΉͮ͸͹͸͵ͷͲͼͯ͵Άͷ΅ͯͬͯͺͻͲͲͺͽʹ͸ͬ͸ͮͻͼͬͪ͹͸͵Άͱ͸ͬͪͼͯ͵ΉͷͪͮͺͽͭͲͿΉͱ΅ʹͪͿ ͹͸ͻͯͼͲͼͯͻͪͳͼ3&7&-41&",&34$0.
別の言語に対応したユーザーマニュアルを読むには、REVELSPEAKERS.COMにアクセスしてください。
ຫဧၴ໕඗໏࿝ఝዽᆓਜ਼࿎࿌ხဴၔREVELSPEAKERS.COM࿝໏ጸၨዻཊགྷ࿼
请访问 REVELSPEAKERS.COM 以获取其他语言版本的用户手册。
Visita REVELSPEAKERS.COM para obtener el manual de usuario de soporte en idiomas adicionales.
Weitere Sprachfassungen der Bedienungsanleitung findest Du unter REVELSPEAKERS.COM.
Si prega di visitare REVELSPEAKERS.COM per i manuali di istruzioni in altre lingue.
Jos tarvitset ylimääräistä kieleen liittyvää tukea käyttÜohjeesta, käy osoitteessa REVELSPEAKERS.COM.
GĂĽ ind pĂĽ REVELSPEAKERS.COM for at se betjeningsvejledningen pĂĽ flere sprog.
Gü till REVELSPEAKERS.COM fÜr mer information om sprük i användarmanualen.
Revel B8 Wireless Subwoofer
Owner’s Manual
  
Revel
 
     

      !"# $%&$'
(   )!* + # ! ,$$ + '-$$
! ./
(
   06
777 89: 0 ';'%,$   < )( )
( =  )-;>
?@ 
' 
+ A  @. A.
BFFG HHJKMQXYF9JYZ[Q)\YH]^\_[MH ) `; a,&-b &&-9'$9c$
! /<@
- 
     
  / < + A
d 
d      < @
<   @      
6f.     g9h) (  
  <    +    i$'$ 
$$$$$$9jk$$$$$$$  gjh 9 A 
a# 9  m 9 + n 9   ))b  gkh 9   a> 9
i$'$ m 9 i$'' n 9 i$'i  ))b)
мȞġĈҳˀΙĀǩ؆Ӎߒʔ
ĈҳˀΙͱʻً
ˌɫǩ؆
ϝԶˌɫ
ŕťž 2D
á°˝
*I
⏠
%F
ԣ͍Ჱ
%T 8+
Ġ⅑Ԓᐸ 2$$
Ġ⅑ȕ᧠⓬
2$&'
Ǘɢ‫ذ‬
ߩ‫ݨ‬Ǘɢ‫ذ‬뼷Ǘɢ‫ذ‬ĘĀǗŔতɫ쨞ă̞ಗ̖ǭǗ
Ŕতɫ쨟뼷ʭˌȠȱΪˈϞ
ᅢɆ
ʋ඀뼷ǚ‫ذ‬뼷Ӻ‫ذ‬Dž
̖ǭǗŔত
ˌɫ
Ȼ‫ؤ‬،뼷̝ٛԟ뼷ęՏǗ̚Ǘ̗뼷Ǘ۷૜ǝ
ઐɍ
ǗϞ뼷ĸdžΒ뼷̞̔Dž
ǕȩϜ֪֘5,6Ā‫ܪ‬ǭৠ̑
1쨰ȩФ˽ĈҳˀΙć˽ˌɫǨĈߴΙࠒնġĀߒʔߴć)$6‫ܪ‬ǭĀՃʔđ́ŗĪ뼶
:쨰ȩФ˽ĈҳˀΙχɹć˽ˌɫĀԚĂߴΙࠒնġĀߒʔɸś)$6‫ܪ‬ǭĀՃʔđ́뼶
ćġϾĉΦդŠŚ‫ؗ‬ʭܽߊĀǗŔǗǯмȞĘȜߩĈrց̝̹ůʿr '2W2 ฼̸뼶
ࠦްġĀ̽ϹͳȩмȞĀȢ˩ց̝̹ůŭՃ뼶
HARMAN International, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
Š 2017 HARMAN International, Incorporated. All rights reserved.
Revel and the Revel logo are trademarks of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries.
Features, specications and appearance are subject to change without notice.
For questions, assistance or additional information concerning any of our products,
call us at: (516) 594-0300 or (888) 691-4171. For technical support, submit your detailed inquiry
Part No. 950-0549-001
www.revelspeakers.com
RSS standard(s).
IC Caution:
User should also be advised that:
(i) The device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems; (ii) the
maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz and
5470 - 5725 MHz shall comply with the e.i.r.p. limit: and
(iii) The maximum antenna gain permitted for devices in the band 5725 - 5825 MHz shall
comply with the e.i.r.p. limits specified for point-to-point and non point-to-point
operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250 - 5350 MHz and 5650 - 5850 MHz and that
these radars could cause interference and/or damage to LE-LAN devices.
For Wi-Fi 5G device
FCC Caution:
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85
GHz bands. These radar stations can cause interference with and/or damage this device.
No configuration controls are provided for this wireless equipment allowing any change in
the frequency of operations outside the FCC grant of authorization for US operation
according to Part 15.407 of the FCC rules.
Use Restriction Attention in France, operation is limited to indoor use within the band
5150-5350 MHz.
Exposure of humans to RF fields (RSS-102)
The computers employ low gain integral antennas that do not emit RF field in excess of
Health Canada limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s Web site at http://www.hc-sc.gc.ca/
The radiated energy from the antennas connected to the wireless adapters conforms to
the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR
tests are conducted using recommended operating positions accepted by the FCC/ RSS
with the device transmitting at its highest certified power level in all tested frequency
band without distance attaching away from the body. Non-compliance with the above
restrictions may result in violation of FCC RF exposure guidelines.
EN 50332-2:2013
EN 50332-1:2013
14/02/2014
2013/56/EU
2013/56/EU
01/07/2015
2014/30/EU
2014/35/EU
2012/27/EU
www.revelspeakers.com
2014/53/EU
2012/27/EU
Le prĂŠsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisĂŠe aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioĂŠlectrique subi, mĂŞme si le brouillage est susceptible d'en compromettre le fonctionnement.
Pour les appareils 5G Wi- Fi
Les utilisateurs devraient aussi ĂŞtre avisĂŠs que
(i) Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rĂŠservĂŠs uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable
aux systems de satellites mobiles utilisant les mĂŞmes canaux;
(ii) Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5
350 MHz et 5 470-5 725 MHz doit se conformer Ă  la limite de p.i.r.e.
(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825
MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point
et non point Ă  point, selon le cas.De plus, les utilisateurs de radars de haute puissance
sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5
250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourrai ent causer du brouillage
et/ou des dommages aux dispositifs LAN-EL.
Conformité des appareils de radiocommunication aux limitesd’expositionhumaine aux radiofréquences (CNR-102)
L’ordinateur utilise des antennesintégrales à faible gain qui n’émettent pas un champ
ĂŠlectromagnĂŠtiquesupĂŠrieur aux normesimposĂŠes par SantĂŠ Canada pour la population.
Consultez le Code de sécurité 6 sur le site Internet de Santé Canada à l’adressesuivante :
http://www.hc-sc.gc.ca/ L’énergieémise par les antennesreliées aux cartes sans filrespecte
la limited’exposition aux radiofréquencestellequedéfinie par Industrie Canada dans la
Utilisez Restriction Attention en France , l'opĂŠration est limitĂŠe Ă  une utilisation
intĂŠrieure dans la bande 5150-5350 MHz.
clause 4.1 du document CNR-102, version 5. Tests DAS sonteffectuĂŠs en utilisant les
positions recommandĂŠes par la FCC/CNR avec le tĂŠlĂŠphoneĂŠmet Ă  la puissance
certifiĂŠemaximaledanstoutes les bandes de frĂŠquencestestĂŠes sans distance attacher loin
du corps.Non-respect des restrictions ci-dessuspeutentraĂŽnerune violation des directives
de la FCC/CNR.
EN 50332-2:2013
EN 50332-1:2013
14/02/2014
01/07/2015
2013/56/EU
2013/56/EU
AVERTISSEMENT : Ne pas ingĂŠrer BATTERIE, BURN RISQUE CHIMIQUE [La tĂŠlĂŠcommande fournie
avec] Ce produit contient une pile pièce / bouton. Si la pile pièce / bouton est avalÊ, il peut
causer des brĂťlures internes graves en seulement 2 heures et peut conduire Ă  la mort. Gardez
piles neuves et usagĂŠes de portĂŠe des enfants. Si vous pensez que les batteries pourraient avoir
ĂŠtĂŠ avalĂŠ ou placĂŠ Ă  l'intĂŠrieur d'une partie du corps, consulter immĂŠdiatement un mĂŠdecin.
2014/53/EU
2012/27/EU
2014/30/EU
2012/27/EU
2014/35/EU
www.revelspeakers.com
EN 50332-1:2013
EN 50332-2:2013
14/02/2014
2013/56/EU
01/07/2015
2013/56/EU
2014/30/EU
2014/35/EU
2012/27/EU
2012/27/EU
www.revelspeakers.com
2014/53/EU

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : A316134
Create Date                     : 2017:08:17 08:48:54+08:00
Modify Date                     : 2017:08:17 08:57:05+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2017:08:17 08:57:05+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:267a6d69-5694-42fc-a9cb-b85f785f688a
Original Document ID            : xmp.did:B4650C242036116881D6EAE18300923D
Document ID                     : xmp.id:91513bfa-1893-417d-a68c-c23d345eb276
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:880d7fba-423a-421c-919d-e5cb6083a5c2
Derived From Document ID        : xmp.did:907bdd3e-3698-4683-a228-5ee500cbe1db
Derived From Original Document ID: xmp.did:B4650C242036116881D6EAE18300923D
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:07:05 11:16:41-07:00
Format                          : application/pdf
Title                           : (B8-T) UserMan.pdf
Creator                         : A316134
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Trapped                         : False
Slug Family                     : Arial
Slug Version                    : 5.06
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Monotype Typography
Slug Font Kind                  : OpenType - TT
Slug Checksum                   : 1252007918
Slug Post Script Name           : ArialMT
Slug Font Sense 12 Checksum     : 1252007918
Page Count                      : 28

EXIF Metadata provided by EXIF.tools