Harmony Technology PLT7100G Tablet PC User Manual 132423

Shenzhen Harmony Technology Co., Ltd Tablet PC 132423

User Manual

eeesssaaaeeelllPPPdddaaaeeerrreeessseeehhhtttsssnnnoooiiitttcccuuurrrtttsssnnniiirrrooofffeeesssuuudddnnnaaaeeevvvaaahhhaaadddoooooogggkkkoooooollltttaaaeeehhhtttnnnoooiiitttaaarrrtttsssuuulllllliiieeerrrooofffeeebbb ...gggnnniiisssuuuUser Manual FCC ID: 2ACJAPLT7100GShenzhen Harmony Technolugy Co.,Ltd.Block 2, Jiayuan Industrial Zone, Heping Communit high-tech park, No 2 Fuyuan Road, Fuyong, Bao'an, Shenzhen, China
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. 1This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Dear customer,At the first beginning, thank you for choosing our products.Read all the information provided before usage. For your convenience, designed to introduce you thefunctions of the product, the manual will help you acquire more on the introduction and usage for a betteruse.For loss and damage of personal data caused by misoperation of software/ hardware, maintenance or otherunexpected conditions, we take no responsibilities, nor are responsible for other indirect consequent loss.Meanwhile, misunderstanding to the manual is possible and uncontrollable by us. Herein, for unexpectedloss in using the manual, we take no charge, nor take the charge of third-party claim.Information in the manual is specially designed for current products without prior notice to updating of newfunctions.Copyright reserved. No photocopy or copy is permitted prior to written authorization by us.We hold the final power of interpretation to the manual, guarantees and related data.(Note: We ask your allowance for faults and omission which may exist in making the manual and welcomeyour criticism and correction. For the problems in usage, please contact our service line (please add yourown service line). Thanks for your support and cooperation. )Again we show our thanks for choosing our products. Please keep attention to other products of ourcompany.Notices:Notices:Notices:Notices:1. Keep the product away from high magnetic fields, which may cause damage to it. The equipment is notwaterproof. Please keep it dry.2. Care the machine not to fall down or hit against hard things, otherwise surface damage, data loss or otherhardware damage is likely to be resulted in.3. Not expose the machine in wet condition or rain. Water or damp in the machine may cause equipmentfailure, so far as to unrepairable4. Neither the chemical reagent nor the cleaning reagent is permitted to clean the machine. Surface may bedamaged and paint may be corroded.5. Not to use the machine continuously with earphones under high volume. Adjust it to a suitable securablevolume. For your hearing, control your usage time. Usage under over-high volume may cause permanentinjuretohearing.6. Not turn off the machine during software updating or uploading & downloading. Data loss or programerrors may be resulted.7. Overload power, bending forcefully or extrusion of the lines against weight are not allowed. Heat maycause fire.8. Some films, music or pictures may be preserved with copyright. Unpermitted broadcasting of those isagainst the copyright law.9. Not use the machine at gas station. Nor use the machine near fuel or chemicals.10. Only qualified maintainers is allowed to fit or repair the machine11. Use original accessories. Not use unmatched products12. Save a copy of the important information of the machine or keep a manuscript in case of losing.13. Read the user manual for detailed instruction of securable usage when link with other devices. Not linkwith unmatched products.2
EnviromentEnviromentEnviromentEnviroment friendlyfriendlyfriendlyfriendly disposaldisposaldisposaldisposalYou can help protect the enviroment!Please remember to respect the local regulations:Hand-in the non-working electrical equipments to an appropriate waste disposal.

Navigation menu