Harsper HP-420M PDP Monitor User Manual 0416 Maple NTSC Eng

Harsper Co., Ltd. PDP Monitor 0416 Maple NTSC Eng

Contents

User Manual 1 of 3

NTSC
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for Compliance could void the user’s authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables.
Contents1OWNER'S MANUALImportant Safety Information ................................................................................................................ 2Overview Of Your New PDP .................................................................................................................. 8OSD Button ........................................................................................................................................................ 8OSD Key Function .............................................................................................................................................. 8Connecting To External Equipment .................................................................................................................. 9RS-232C Configurations .................................................................................................................................... 10Accessories ............................................................................................................................................ 12Features Of The Remote Control .......................................................................................................... 13Loading The Batteries ........................................................................................................................................ 14Reception Range Of Remote Control .............................................................................................................. 14Monitor Installation ................................................................................................................................15Wall Mount (optional) Installation ...................................................................................................................... 15Table Stand (optional) Installation ...................................................................................................................... 19Speaker Installation ............................................................................................................................................ 21Optional Extras ........................................................................................................................................ 25Watching TV ............................................................................................................................................ 26To watch TV (When the Interface board is installed) ...................................................................................... 26Watching VCR ........................................................................................................................................ 27To watch VCR (When the Interface board is installed) .................................................................................... 27Watching DVD (Interlace) ...................................................................................................................... 28How to connect (When the Interface board is installed) .................................................................................. 28How to use (When the Interface board is installed) .......................................................................................... 28Watching DVD (Progressive) ................................................................................................................ 29How to use (When the Interface board is installed) .......................................................................................... 29Connecting The PC .............................................................................................................................. 30Displayable Monitor Specification ........................................................................................................ 31OSD Structure .......................................................................................................................................... 32PICTURE (TV&VIDEO) ............................................................................................................................ 33PICTURE (PC) .......................................................................................................................................... 35SOUND (TV&VIDEO+PC) ...................................................................................................................... 37MISC (TV&VIDEO+PC) .......................................................................................................................... 38TIME ........................................................................................................................................................ 40TV SET-UP .............................................................................................................................................. 41PIP (PC) .................................................................................................................................................... 42Hot Key Function By Remote Control .................................................................................................. 43Specification ............................................................................................................................................ 46Troubleshooting ...................................................................................................................................... 48Waranty Card .......................................................................................................................................... 49
Important Safety Information2OWNER'S MANUALCAUTION- TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD.- DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.- SHOCK HAZARD DO NOT OPEN.CAUTIONThese servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operatinginstructions unless you are qualified to do so.CAUTIONThe stand intended for use only with This PDP TV. Use withother apparatus is capable of resulting in Instability causingpossible injury .Always be careful when using your Monitor. To reduce the risk of fire, electrical shock,and other injuries, keep these safety precautions in mind when installing, using, andmaintaining your machine.- Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.- This is Class B product. In a domestic environment this product may cause radio interference in which case theuser may be required to take adequate measures.- To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.WARNINGThis device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in home environment as well as in acommercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and,if not installed and used in accordance with the instruction, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures :- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Changes or modification not expressly approved by the party responsible for compliance could void the user's authority tooperate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.FCC NOTICERead all safety and operatinginstructions before operatingyour Monitor.Keep the safety and operatinginstructions for future reference.Heed all warnings on the Monitorand in the operating instructions.CAUTION : TO REDUCE THE RISK OFELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK),NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.This symbol is intended to alert the user to the presence of important operating and maintenance(servicing instructions in the literature accompanying the appliance.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN

Navigation menu