Hasbro Far East 71091 Lazer Tag Communicator User Manual id 71091 LT TeamTalk

Download:
Mirror Download [FCC.gov]
Document ID	414385
Application ID	zDB+ltlhocobsX1bep1tKQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	53.03kB (662888 bits)
Date Submitted	2004-04-15 00:00:00
Date Available	2004-04-14 00:00:00
Creation Date	2004-02-07 13:55:33
Producing Software	Adobe PDF Library 5.0
Document Lastmod	2004-04-14 10:23:57
Document Title	id_71091_LT_TeamTalk
Document Creator	Adobe InDesign 2.0.1

AGES 8+
TO USE
CHANNEL SELECTOR
1. Dial the “On/Off/Volume Dial” to turn the
TEAM COMM Headset 2 Player System “On.”
Once turned on, you will see the “LED On/Off
LED
Indicator” light up to indicate there is power to
the system.
2. Next, select which channel (1-3) your team
will communicate on by turning the “Channel
Selector.” Confer with your teammates when
making the selection. You will only be able to TALK
talk with your teammates if all of your Main BUTTON
Units are on the same channel. Conversely, you
may eavesdrop on your opponents by changing
the channel to theirs.
3. When you are ready to talk to one of your
teammates, press and hold down the “Talk”
ON/OFF/VOLUME
button. You must continue to hold down the
DIAL
button while talking, and release it once you
are finished.
4. To adjust the volume of your headset, dial up or
down on the “On/Off/Volume Dial.”
FCC STATEMENT
CAUTION: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
71091
®
™*
Team Comm™* Headset
2 Player System
Thank you for purchasing the Lazer Tag® Team Comm™* Headset 2 Player
System! Step into LAZER TAG – Where Video Game Action Comes to Life!™* Use
the TEAM COMM Headsets to complete the ultimate LAZER TAG system. Attach
the headset to your HUD™* (HEADS UP DISPLAY) Unit or directly to your ear
and clip or hook the main unit to your belt for on-the-run team communication!
Strategize with your team, and spy on the other team by listening in on their
channel. The 900 MHz frequency ranges up to approximately 200 ft.† so you can
communicate faster and further away!
Please be sure to read and follow all instructions carefully before using this product.
Includes 1 Green Set, 1 Orange Set and Instruction Booklet.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Lazer Tag is a trademark of Shoot the Moon
Products and used with permission.
Energizer, Energizer MAX and other marks are
trademarks of Eveready Battery Company, Inc.
®* and/or ™* & © 2004 Hasbro. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office.
70191
P/N 6361270000
Where Technology Comes to Play!™*
����� ��� ������ ����� ��� ���� ��
Questions? Call 1-800-327-8264
Tiger®* recommends
ENERGIZER batteries for
optimum performance.
Each Main Unit requires 1 x “9V” or 6LR61 size
battery (not included). Alkaline battery recommended.
Phillips/cross head screwdriver (not included) needed
to insert battery.
† Range may vary based on terrain and weather conditions.
MAIN UNIT AND EARPIECE
TO INSERT BATTERIES
CHANNEL SELECTOR
ON
VO
OF
OF
Using a Phillips/cross head screwdriver,
loosen the screw in the battery
compartment cover (screw stays attached
to cover). Remove cover. Insert 1 x “9V”/
6LR61 alkaline battery. Replace cover and
tighten screw.
BELT LOOP
BELT CLIP
TALK BUTTON
CAUTION: TO AVOID BATTERY
LEAKAGE
EARPIECE
1. Be sure to insert the batteries correctly and always follow the toy and
battery manufacturers’ instructions;
2. Do not mix old and new batteries or alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium) batteries;
LED ON/OFF
INDICATOR
MIC
ON/OFF/VOLUME
DIAL
3. Always remove weak or dead batteries from the product.
Connect the cable on the Main Unit to the cable on the Earpiece.
IMPORTANT: BATTERY INFORMATION
The TEAM COMM Headset 2 Player System can be used in two different ways: attach the
headset directly to your ear or attach the headset to the HUD™* (HEADS UP DISPLAY) Unit.
Then, clip or loop the Main Unit directly to your belt.
Please retain this information for future reference.
Batteries should be replaced by an adult.
CAUTION:
1. Always follow the instructions carefully. Use only batteries specified
and be sure to insert item correctly by matching the + and – polarity
markings.
2. Do not mix old batteries and new batteries or standard (carbon-zinc)
with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical
interference, move it away from other electrical equipment. Reset
(switching off and back on again or removing and re-inserting
batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types
of battery. Always remove from the product before recharging.
Recharge batteries under adult supervision. DO NOT RECHARGE
OTHER TYPES OF BATTERIES.
TO ATTACH THE TEAM COMM HEADSET 2 PLAYER SYSTEM TO HUD (Heads Up Display):
1. Rotate the TEAM COMM Earpiece
180° clockwise. Snap into the left
side of the HUD (Heads Up Display).
The microphone should be within 2-3
inches of your mouth.
2. Clip or loop the Main Unit directly
to your belt.
TO WEAR TEAM COMM HEADSET 2 PLAYER SYSTEM (WITHOUT HUD):
1. Put on the TEAM COMM Headset so
that the earpiece fits comfortably
over your left ear, and adjust the
microphone so that it is within 2-3
inches from your mouth.
2. Clip or loop the Main Unit directly to
your belt.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:04:14 10:23:57+08:00
Create Date                     : 2004:02:07 13:55:33Z
Creator                         : Adobe InDesign 2.0.1
Trapped                         : False
Page Count                      : 2
Creation Date                   : 2004:02:07 13:55:33Z
Mod Date                        : 2004:04:14 10:23:57+08:00
Producer                        : Adobe PDF Library 5.0
Metadata Date                   : 2004:04:14 10:23:57+08:00
Document ID                     : adobe:docid:indd:65db89bb-5aef-11d8-967e-e3c52427ecc0
Version ID                      : 1
Rendition Class                 : proof:pdf
Rendition Of Document ID        : adobe:docid:indd:65db89bb-5aef-11d8-967e-e3c52427ecc0
Rendition Of Version ID         : 1
Rendition Of Rendition Class    : default
Format                          : application/pdf
Title                           :  id_71091_LT_TeamTalk
Has XFA                         : No

EXIF Metadata provided by EXIF.tools