Hastech HB180B Bluetooth Keyboard User Manual 15 HB180B UserMan
Shenzhen Hastech industries Co., Ltd Bluetooth Keyboard 15 HB180B UserMan
Hastech >
15_HB180B UserMan
① Caps Lock Indicator: Green light is on.
Bluetooth Indicator: Blue light will flash after pressing the “FN+ ”
keys together. Pair successfully will off.
Home
Search
Previous
track
Mute
Lock
Reduce
brightness
Keyboard
Display
Play/pause
Volume down
Battery power
display
Increase
brightness
Select
Language
Next track
Volume up
ON/OFF
① ②
Bluetooth Keyboard For iPad Pro
User Manual
Package Contents
Specifications
Product Overview
Function Keys
Pairing keyboard method
SPECIAL NOTE:
Power Saving Mode
Charge it
Pairing with iPad Pro
1. Only one device can be actively paired at one time.
2. After pairing for the first time, your device will connect to the
keyboard automatically when opening the keyboard.
3. In case of connection failure, delete the pairing record from
your device, and try the above procedures again.
1.Bluetooth keyboard
2.Micro-USB charging cable
3.User manual
Step 1. Press , the keyboard turns on; Re-press 1.5 seconds to close.
Step 2. Press the “FN+ ” keys together to enter pairing mode.
The blue Bluetooth indicator will start to rapidly flash.
Step 3. On the iPad Pro, select: Settings- General- Bluetooth-On.
Step 4. The iPad Pro will display “Bluetooth 3.0 keyboard” as an
available device.
Step 5. Select “ Bluetooth 3.0 Keyboard ” on the iPad Pro, click on it,
the keyboard will now be paired to iPad Pro and the Bluetooth
indicator will turn off.
The keyboard will enter sleep mode when idle for 30 minutes.
To re-active it, press any key and wait for 3 seconds.
1. Plug the micro end of the USB charging cable into the keyboard.
2. Plug the USB end of the cable into a computer or charging adapter
(not included).
Note: Battery life of keyboard is approximately 90 hours, if the red
charge indicator light begins flashing during use, 4-hour recharge is
recommended.
Caution
When not in use for a prolonged period of time, it is recommended
that you turn off the keyboard to lengthen the battery life.
Warning
1. Keep the keyboard away from sharp objects and liquids.
2. Do not place heavy objects on the keyboard.
3. Avoid extreme hot and cold temperatures.
② Power Indicator: The Green light will flash.
Red light will turn on when the keyboard is charging and turn green
once fully charged.
Battery Low Indicator: Red light will flash when it is time to recharge.
Battery power display Indicator: Press “Fn+ ”, flashing Green.
（Every blinking represents 25% battery. That is to say, flash once,
the remaining battery 25% ; flash twice, the remaining battery 50% . )
Bluetooth Specification
Dimensions
Operating Range
Modulation System
Stand-by time
Charge time
Uninterrupted Work Time
Lithium Battery Capacity
Lithium Battery Life
Key Life
Bluetooth 3.0
304x223x7.7mm
Up to 10 meters
GFSK
90 days
< 4 hours
90 hours
230 mAh
3 years
3 million clicks
Fn
PgUp
PgDn
Home En d
Model:HB180B
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo
conditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.