Healthrider HRTL09990 User Manual Manuals And Guides L0902611

HEALTH RIDER Treadmill Manual L0902611 HEALTH RIDER Treadmill Owner's Manual, HEALTH RIDER Treadmill installation guides

HRTL09990 L0902611

User Manual: Healthrider HRTL09990 HRTL09990 HEALTHRIDER HEALTHRIDER - Manuals and Guides View the owners manual for your HEALTHRIDER HEALTHRIDER #HRTL09990. Home:Fitness Equipment Parts:Health Rider Parts:Health Rider HEALTHRIDER Manual

Open the PDF directly: View PDF .
Page Count: 30

Download
Open PDF In Browser	View PDF

Model No. HRTL09990
Serial No.
Write the serial number in the space
above for future reference.

Serial Number Decal

QUESTIONS?
As a manufacturer, we are
committed to providing corn=
plete customer satisfaction. If
you have questions, or if there
are missing parts, we will guarantee complete satisfaction
through direct assistance from
our factory.

UAL

TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our customer hot line
will provide immediate assistance, free of charge.
CUSTOMER HOT LINE:

1-800-999-3756
Mon.-Fri.,

6 a.m.-6 p.m. MST

CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual for future reference.

www.healthrider.com
new products,
prizes,
fitness tips, and much more!

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS .................................................................
BEFORE YOU BEGIN .......................................................................
ASSEMBLY ...............................................................................
OPERATION AND ADJUSTMENT
.............................................................
HOW TO FOLD AND MOVE THE TREADMILL ..................................................
TROUBLE-SHOOTING AND MAINTENANCE
...................................................
CONDITIONING GUIDELINES ...............................................................
PART LIST ...............................................................................
HOW TO ORDER REPLACEMENT PARTS .....................................................
LIMITED WARRANTY ...............................................................

3
5
6
7
21
22
24
26
27
Back Cover

Note: An EXPLODED DRAWING is attached in the center of this manual. Please save the EXPLODED DRAWING
for future reference.

iMPORTANT PRECAUTIONS
WARNING: Toreduce
the.skofburns,
fire,e ect.c
shock,
orinjury
topersons,
read
the
following

important precautions and information before operating

1. It is the responsibility
of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill

only as described in this

manual.

3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
.

The treadmill should not be used by persons
weighing more than 250 pounds. Never allow
more than one person on the treadmill at a
time.

8. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose clothing that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women. Always wearath/eric shoes. Never use the treadmil/ with bare
feet, wearing only stockings,
9.

or in sandals.

When connecting the power cord (see page
7), plug the power cord into a surge protector
(not included) and plug the surge protector
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit.

10. Use only a UL-listed surge protector, rated at
15 amps, with a 14-gauge cord of five feet or
less in length. Do not use an extension cord.

the treadmill.

11. Keep the power cord and the surge protector
away from heated surfaces.
12. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the treadmill is not working properly.)
13. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
14. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
15. Do not use the hand weights at speeds higher
than a walk. Using hand weights and not holding the handrails may compromise your ability
to maintain your balance. Exercises using
hand weights should be attempted only by experienced users.
16. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the location of the on/off switch.)
17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO MOVE
THE TREADMILL on page 21 .) You must be
able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
18.When folding or moving the treadmill, make
sure that the storage latch is fully closed.
19. Inspect and tighten all parts of the treadmill
every three months.
20. Never drop or insert any object into any
opening.

20.
DAN G E R: Always

the
power

unplug
cord immediately after use, before cleaning
the treadmill, and before performing the
maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative.
Servicing

other than the procedures in this manual
should be performed by an authorized service representative only.
21. The treadmill is intended for in-home use
only. Do not use the treadmill in any
commercial, rental, or institutional setting.

_ WARNING: Before
beginning
thisoranyexercise
program,
coosu,
yourphysician.
This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using, iCON assumes no responsibility
for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE iNSTRUCTiONS
The decals shown below have been placed on your treadmill, if a decal is missing, or if it is not legible,
please call our Customer Service Department toll-free at 1=800=999=3756 to order a free replacement decal.
Apply the decal in the location shown. Note: The large decal is shown at 38% of actual size.

| • Keep hands and
| feet clear of this area_--| while operating or

BEFORE YOU BEGIN
Congratulations for purchasing the SOFTSTRIDER
S300F Mtreadmill by HealthRider% The SOFTSTRIDER
S300i offers an impressive array of features to help
you achieve your fitness goals in the convenience of
your home. From the advanced console to the cushioned walking belt, the SOFTSTRIDER S300i is designed to make each workout more effective and enjoyable. And when you're not exercising, the SOFTSTRIDER S300i can be folded away, taking less than
half the floor space of conventional treadmills.
For your benefit, read this manual carefully before
using the SOFTSTRIDER S300i treadmill. If you

have additional questions, please call our Customer
Service Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please note the product model number and serial number before calling. The model number is HRTL09990.
The serial number can be found on a decal attached to
the treadmill (see the front cover of this manual for the
location).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Hand Weights
Book Holder
Chest Pulse Sensor

Console

Water Bottle

Handrail
Key/Clip
Lock Knob_
RIGHT SIDE

On/Off
Switch

Walking Belt

Circuit
Breaker
Foot Rail

BACK

Cushioned

Power
Cord

Walking Platform
Rear Roller
Adjustment Bolts

*For information about the optional chest
pulse sensor, see page 20.
1-Water bottle is not included.
5

ASSEMBLY
Assembly requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until the treadmill is assembled. No tools are required.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or
the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or
on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
,

With the help of a second person, carefully raise the
Uprights (103) until the Wheels (99) are resting on the
floor as shown.

2. Next, make sure that the Lock Knob Sleeve (68) is fully
inserted into the left Upright (103).
Remove the Lock Knob (67) from the Lock Pin (72). Make
sure that the Lock Pin Collar (70) and the Spring (69) are
on the Lock Pin. Insert the Lock Pin into the left Upright
(103) and tighten the Lock Knob onto it.
69
72
67

3. Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill
to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the
TROUBLE-SHOOTING AND MAINTENANCE section on pages 22 and 23.

GROUNDING
THE PERFORMANT

iNSTRUCTiONS

LUBE TM WALKING BELT

of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge
protector, and plug the surge protector into an ap=
propriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.

Your treadmill features a walking belt coated with
PERFORMANT LUBE TM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking platform. Such substances will deteriorate the walking
belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD

DANGER:

mproper
connection

of the equipment-grounding
conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productDif
it Will
not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illustrated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2=pole receptacle outlet box
covers are not grounded. Contact a qualified elec=
trician to determine if the outlet box cover is
grounded before using an adapter.

Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances
being turned on or off.
To decrease the pos=
1
sibility of your tread=
j Grounded Outlet Box
mill being damaged,
always use a surge
protector (not included) with your
treadmill.

Grounding Pin

"_unding
Surge protectors are
sold at most hardware

Treadmill Power

\Grounded

Plug
Outlet

stores and department
stores. Use only a ULlisted surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.
This product must be
grounded. If it should
malfunction or break

Surge Protector

down, grounding provides a path of least resistance for electric current to reduce the risk
7

DIAGRAM OF THE CONSOLE

BIOLOGIC

...............................................

Note: If there is a thin
sheet of clear plastic
on the face of the
console, remove it.

FEATURES OF THE CONSOLE
The treadmill console offers an impressive selection of
features to help you get the most from your exercise.
When the console is in the manual mode, the speed
and incline of the treadmill can be changed with a
touch of a button. As you exercise, the four displays
will show your workout time, the number of calories
you have burned, the distance you have walked, the
incline level of the treadmill, and the speed of the walking belt. If you purchase an optional handgrip pulse
sensor or chest pulse sensor, the console will also
show your heart rate.
The console also offers four preset workout programs.
Each program automatically controls the speed and incline of the treadmill as it guides you through an effective workout. The included hand weights can be used for
upper body exercise as well. If you purchase the optional chest pulse sensor, the console's two pulse programs can also be used. Each program controls the
speed and incline of the treadmill to keep your heart rate
within a preset range during your workouts.
The console also features advanced iFit.com technol-

ogy. IFit.com technology is like having a personal
trainer right in your home. Using the included audio
cable, you can connect the treadmill to your home
stereo, portable stereo, or computer and play special
iFit.com CD programs (CD's are available separately).
IFit.com CD programs automatically control the speed
and incline of the treadmill as a personal trainer guides
you through every step of your workout. High-energy

music provides added motivation. Each CD features
two programs designed by certified personal trainers.
In addition, you can connect the treadmill to your VCR
and TV and play iFit.com video programs (videocassettes are available separately). Video programs offer
the same benefits as iFit.com CD programs, but add
the excitement of working out with a class and an
instructor--the hottest new trend at health clubs.
With the treadmill connected to your computer, you
can also go to our new internet site at www.iFit.com
and access basic programs that interactively control
the speed and incline of your treadmill to help you
achieve your specific exercise goals. Or, use iFit.com
audio and video programs directly from our internet
site. Visit www.iFit.com for complete details.
By adding an optional upgrade module to the treadmill,
you can use virtually endless features from our internet
site. See www.iFit.com to learn about other iFit.com
features.
To purchase iFit.com CD's, iFit.com videocassettes,
or an optional upgrade module, call toll-free 1-800-7350768. For information about the optional handgrip pulse
sensor or chest pulse sensor, see page 20.
To use the manual mode of the console, follow the
steps beginning on page 10. To use a preset program,
see page 12. To use a pulse program, see page 13.
To use iFit.com CD or video programs, see page 17.
To use iFit.com programs directly from our inter=
net site, see page 19.

DESCRiPTiON
OFTHECONSOLE

WARNI NG: Donotusethe

Refertothedrawingonpage8 toidentifythefeatures
described
below.

hand weights at speeds higher than a walk.
Using hand weights and not holding the
handrails may compromise your ability to
maintain your balance. Exercises using
hand weights should be attempted only by
experienced users.

A. Waterbottleholder--Thisholderkeepsyourwater
bottlehandyduringyourworkouts(nowaterbottle
is included).
B. Handweightholder--These
compartments
holdthe
includedhandweights.

C. Bookholder--Thisholderallowsyouto reada good
bookorenjoyyourfavoritemagazine
whileyouget
inshape.
D. Inclinebuttons--These
buttonscontroltheinclineof
thetreadmill.Theinclinerangeis 1.5%to 10%.
E. Speedbuttons--These
buttonscontrolthespeedof
thewalkingbelt.Thespeedrangeis0.5mphto 10
mph.

F. Stopbuttons--These
buttonsareusedtostopthe
walkingbelt.Note:Pressingeitherbuttonwillstop
thewalkingbelt.
G.Startbutton--Thisbuttonis usedto startthewalking
belt.
H.Waistband
clip--Thisclipis designedtobewornon
thewaistband
ofyourclothes,ifthe keyis pulled
fromtheconsole,
thewalkingbeltwillautomatically
stop.
I. Key--Thiskeyturnstheconsoleonandoff.
J. Time/Segment
Timedisplay--When
themanual
modeoraniFit.comprogramisselected,
thisdisplay
willshowtheelapsedtime.Whena presetprogram
or a pulseprogramis selected,
thedisplaywillshow
boththetimeremainingintheprogramandthetime
remaining
inthecurrentsegmentoftheprogram.
Thedisplaywillalternatebetweenonenumberand
theothereverysevenseconds.
K. CrossTrainingindicator--During
theFitnesswalk
andCardiojog
programs,
thisindicatorwillperiodicallyflash.Theincludedhandweightscanbe used
whilethe indicatoris flashingtoaddupperbody
exercise to your workouts.

Calories/Pulse display--This display shows the approximate number of calories you have burned.
When the optional chest pulse sensor is worn, the
display will also show your heart rate. The display
will alternate between one number and the other
every seven seconds. If the optional handgrip pulse
sensor is used, the display will show your heart rate
continuously while your hands are on the pulse sensor.
Distance/Incline display--This display shows the
distance you have walked and the incline level of
the treadmill. The display will alternate between one
number and the other every seven seconds. Note:
Each time the Incline buttons are pressed, the display will change to show the incline setting.

N. Speed display--This
the walking belt.
O. Enter button and

display shows the speed of

and V buttons--These

buttons

are used to enter your age when pulse programs
are used.
P,

Select Workout button--This button is used to select
the manual mode, the four preset programs, the two
pulse programs, and iFit.com programs. Note: If the
walking belt is moving when the Select Workout
button is pressed, the walking belt will slow to a
stop and the displays will be reset.

Q. Mode indicators--These

indicators show whether

the manual mode, a preset program, a pulse program, or an iFit.com program is selected.
R,

Program profiles--These profiles show how the target heart rate will change during pulse programs
and how the speed and incline of the treadmill will
change during preset programs.

Note: The console can display exercise feedback
in either miles or kilometers (see SPEED DISPLAY
on page 11). For simplicity, all instructions in this
section refer to miles.

WARNING: Toreduce
theriskof
serious injury, read the following
before operating the console.

HOW TO USE THE MANUAL MODE

precautions

- Do not stand on the walking belt when turning on the power or starting the walking belt.

nl Insert the key into the console.
See HOW TO TURN ON THE POWER at the left.
Select the manual mode.

• Always attach the clip (see "H"on page 8) to
your waistband when using the treadmill, if
the key is pulled from the console, the walking belt will stop.
• The treadmill is capable of high speeds.
Adjust the speed in small increments.
• To reduce the risk of electric shock, keep
liquids away from the console and place only
a sealed water bottle in the console.

CrossTra_nl_

Do not use the hand weights at speeds higher
than a walk. Using hand weights and not holding the handrails may compromise your ability
to maintain you r balance. Exercises using
hand weights should be attempted only by experienced users.

Press the Start button or the Speed
to start the walking belt.

if you have heart problems, or if you are over
60 years of age and have been inactive, do
not use the pulse programs, if you are taking
medication regularly, consult your physician
to find whether the medication will affect
your exercise heart rate. Note: The pulse programs require an optional chest pulse sensor.

As you exercise, adjust
the speed of the walking
belt as desired by pressing the Speed buttons.
Each time one of the

HOW TO TURN ON THE POWER

Plug in the power cord (see HOW TO PLUG IN
THE POWER CORD on page 7).
Locate the on/off
switch on the front of
the treadmill near the
power cord. Make
sure that the on/off
switch is in the on

Position

position.
Stand on the foot
rails of the treadmill.
Find the clip attached
to the key and slide
the clip onto the
waistband of your
clothing. Next, insert
the key into the console. After a moment, the four
displays and various indicators will light.
10

When the key is inserted, the manual
iOeont
mode will be selected
and the manual indicator will light. If a program has been selected, press the Select
Workout button repeatedly to select the manual
mode.
button

A moment after the button is pressed, the walking
belt will begin to move at 1.0 mph. Hold the handrails and begin walking.

buttons is pressed, the
speed will change by
0.1 mph. If one of the buttons is held down, the
speed will change in increments of 0.5 mph.
To stop the walking belt, press either of the Stop
buttons. The four displays will pause and the
Time/Segment Time display will begin to flash. To
restart the walking belt, press the Start button or
the Speed
button. To stop the walking belt and
reset the displays, press a Stop button, remove
the key, and then reinsert the key.
Adjust the incline of the treadmill.
To vary the intensity of
your exercise, adjust the
incline of the treadmill
as desired with the
m:_ DISTANCE
_
Incline buttons. Each
time one of the buttons
is pressed, the incline
will change by 0.5%. The incline range is 1.5% to
10%. Note: After the buttons are pressed, it may
take a moment for the treadmill to reach the selected incline setting.

-J.-2II

Followyour

progress

Time/Segment Time
display--When
the
manual mode or an

iFit.com program is
TIME
selected, this display
I I:::u SEGMENT
TIME
wilt show the elapsed
time. When a preset
program or a pulse program is selected, the display
will show both the time remaining in the program
and the time remaining in the current segment of
the program. The display will alternate between
one number and the other every seven seconds.
Note: The Cross Training indicator below the display will periodically flash during the Fitnesswalk
and Cardiojog programs. While the indicator is
flashing, the included hand weights can be used for
upper body exercise as you walk on the treadmill.
Calories/Pulse
display--This
display
shows the approximate
number of calories you
have burned. When the

displayed in either miles
per hour (mph) or kilometers per hour (kph).
To see which unit of
measurement is se-

MA_
ACTUAL

ir i]
PULSE

every seven seconds. If the optional handgrip
pulse sensor is used, the display will show your
heart rate continuously while your hands are on
the pulse sensor.
Distance/Incline

PEED

lected, first hold down
one of the Stop buttons while inserting the key into
the console. The Speed display will show an "E"
for English miles or an "M" for metric kilometers.
Press the Speed
button to change the unit of
measurement. When the desired unit of measurement is selected, remove and then reinsert the key.
When you are finished exercising,
walking belt and remove the key.

CALORIES
Ll_
optional chest pulse
sensor is worn, the display will also show your heart rate. The display
will alternate between one number and the other

display--This
display
shows the distance you
have walked and the
incline level of the

I/
Note
+he
spee
can
be
I ++
.....
Speed display--This
display shows the speed
of the walking belt.

with the four displays.

stop the

Step onto the foot rails, press one of the Stop buttons, and adjust the incline of the treadmill to 1.5%.
The incline must be at 1.5% when the treadmill
is raised to the storage position or the treadmill
will be damaged. Next, remove the key from the
console and put it in a safe place. Note: If the displays and indicators on the console remain lit
after the key is removed, the console is in the
"demo" mode. Refer to page 20 and turn off the
demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.

L7,'_=,'j

DISTANCE

_:_ INCLINE

/
]

treadmill, The display
will alternate between
one number and the other every seven seconds.
Note: Each time the Incline buttons are pressed,
the display will change to show the incline setting.

The program will continue in this way until the
Time/Segment Time display counts down to zero.
The walking belt will then slow to a stop.

HOW TO USE THE PRESET PROGRAMS

insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
Select one of the four preset programs.
When the key is
inserted, the
manual mode
will be selected
and the manual
indicator will

_:_

HEALTHWALK

(2_

mph

/ 15.6%

grado

=
.........
'
_ g!f_%o_
g;_;,g;g"i""

u i_,.o.,

light. To select
one of the preset programs,
press the Select
Workout button repeatedly until one of the four
preset program indicators lights.
The profiles on the console show how the speed
and incline of the treadmill will change during the
preset programs--the white profiles show speed
settings and the green lines show incline settings.
The numbers at the left ends of the profiles show
the speed and incline ranges for the programs.
For example, during the Healthwalk program, the
speed of the walking belt will be from 2 mph to 4
mph and the incline will be from 1.5% to 6%. The
Time/Segment Time display will show how long
the selected program will last.
Press the Start button or the Speed
to start the program.

Use the hand weights,

if desired.

If you have selected the
Fitnesswalk or Cardio-

II = re,ME

jog program, the Cross
Training Indicator in the
Time/Segment Time
display will periodically
flash. While the indicator

I J=sL NTT'ME I I
I _'r,_i.z.g
.................

I I
_Seslh)a[g!

Follow your progress

with the four displays.

Refer to step 5 on page 11.
has ended, remove the key.

Step onto the foot rails and make sure that the incline of the treadmill is at 1.5%. The incline must
be at 1.5% when the treadmill is raised to the
storage position. Next, remove the key from the
console and put it in a safe place. Note: If the displays and indicators on the console remain lit
after the key is removed, the console is in the
"demo" mode. Refer to page 20 and turn off the
demo mode.

TIME
m

SEGMENT

is flashing, use the included hand weights for upper
body exercise as you walk on the treadmill.

When the program

TiME

remaining in the program and the time remaining in the current segment. One speed setting and one incline setting
are programmed for each segment. When only
three seconds remain in the first segment of the
program, a series of tones will sound and the
treadmill will automatically adjust to the speed and
incline settings for the second segment.

To stop the program temporarily, press one of the
Stop buttons. All displays will pause and the Time/
Segment Time display will begin to flash. To
restart the program, press the Start button or the
Speed
button. To end the program, press a Stop
button, remove the key, and then reinsert the key.

button

A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings for the program. Hold the handrails
and begin walking.
Each program is divided into several time
segments of different
lengths. The Time/
Segment Time display
will show both the time

If the speed or incline setting for the current segment is too high or too low, you can manually
override the setting by pressing the Speed or
Incline buttons on the console. However, when
the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.

When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.

HOWTOUSETHE

Enter a maximum

PULSE PROGRAMS

Note: The pulse programs can be used only when
the optional chest pulse sensor is worn. See page
20 for information about the chest pulse sensor.

Insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
Put on the chest pulse sensor.
You must wear the chest pulse sensor in order to
use a pulse program. To put on the chest pulse
sensor, follow the instructions included with the
chest pulse sensor.

heart rate setting.

After you have
entered your
age, another
number will

begin to flash in
the CALORIES/

I[1

......................................................
_J
I

PULSE display.
This nu mbe r is the maximum heart rate sett//z.gfor
the program. If Pulse program 1 is selected, the
maximum heart rate setting can be from 65% to
85% of your maximum possible heart rate (your
maximum possible heart rate is 220 minus your
age); if Pulse program 2 is selected, the maximum
heart rate setting can be from 65% to 80% of your
maximum possible heart rate. Note: Your maximum possible heart rate is an estimate only.

Select one of the two pulse programs.
When the key is
inserted, the
manual mode
will be selected
and the manual
indicator will

r:_ PULSE Workout 2

Y
J_=L L_ZJZ_

light. To select
one of the pulse programs, press the Select
Workout button repeatedly until one of the two
pulse program indicators lights.
The profiles on the console show how the target
heart rate will change during the programs. The
Time/Segment Time display will show how long
the selected program will last.
Enter your age.
When a pulse
program is se_
=_
TargetP
lected, an age
setting will begin
to flash in the
CALORIES/
[I
!_
PULSE display.
If you have already entered your age, simply press
the Enter button. To enter your age, press the
and V buttons. The buttons can be held down to
enter your age quickly. When your age is shown,
press the Enter button.
ACTUAL

PULSE

For example, if you are 30 years old, your maximum possible heart rate is 190 (220 minus 30
equals 190). Therefore, if Pulse program 1 is selected, the maximum heart rate setting can be from
123 to 161 (65% of 190 is 123; 85% of 190 is 161 ).
If you want to change the maximum heart rate setting, press the
and V buttons. The buttons can
be held down to change the setting quickly. When
the desired setting is shown, press the Enter button.
Press the Start button or the Speed
to start the program.

button

A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings for the program. Hold the handrails
and begin walking.
Each program is divided
into several time segments of different
lengths. The Time/
Segment Time display
will show both the time

!..........
°

remaining in the program and the time remaining in the current segment. One target heart rate setting is programmed
for each segment. When only three seconds remain in the first segment of the program, a series
of tones will sound and the next segment will
begin. As you exercise, the speed and/or incline of
the treadmill will automatically change as needed
to keep your heart rate near the current target
heart rate setting.
The program will continue until the Time/Segment
Time display counts down to zero. The walking
belt will then slow to a stop.
13

If your heart rate is not detected during the program, the speed and incline of the treadmill may
automatically decrease until your heart rate is detected, if this happens, see the instructions included with the chest pulse sensor.

Follow your progress

If the speed or incline setting for the current segment is too high or too low, you can adjust the setting with the Speed or Incline buttons. However, if
you decreasethe speed, the incline will automatically increase, if you/ncreasethe
speed, the incline will decrease. If you/ncreasethe
incline, the
speed will decrease, if you decrease the incline,
the speed will increase. The treadmi// wi// a/ways
attempt to keep your heart rate near the target
heart rate setting for the current segmenL Note:
When the incline reaches the lowest setting, the
speed cannot be increased any further. When the
incline reaches the highest setting, the speed cannot be decreased any further.

Step onto the foot rails and make sure that the incline of the treadmill is at 1.5%. The incline must
be at 1.5% when the treadmill is raised to the

with the four displays.

Refer to step 5 on page 11.
When the program

has ended, remove the key.

storage position. Next, remove the key from the
console and put it in a safe place. Note: If the displays and indicators on the console remain lit
after the key is removed, the console is in the
"demo" mode. Refer to page 20 and turn off the
demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.

HOW TO CONNECT YOUR PORTABLE STEREO

HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER

To use iFit.com CD's, the treadmill must be connected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
15 and 16 for connecting instructions. To use iFit.com
videocassettes,
the treadmill must be connected to
your VCR. See page 17 for connecting instructions. To
use iFit.com programs directly from our internet
site, the treadmill must be connected to your home
computer. See page 16 for connecting instructions.

Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5ram LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into an AUDIO OUT jack on your stereo.

HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT and
PHONES iacks, see instruction A below. If your CD
player has only one jack, see instruction B.

[C-_]_i
_-"[-_

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.

-j=,
................'

Audio
i

Adapter--_

Cable

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.

-i

HeadUNE OUT

:.2._.i
[_ (_)

Cable
Audio

phones
Cable

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your CD player. Plug your
headphones into the other side of the Y-adapter.

PHONES
(_i

C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your stereo. Plug your
headphones into the other side of the Y-adapter.
C

Audio
Cable

3.5mm
Y-adapter_
_-4z:_
u_,o

Y-adapter--.__

Headphones _,_
15

HOW TO CONNECT YOUR HOME STEREO

HOW TO CONNECT YOUR COMPUTER

Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.

Note: If your computer has a 3.5ram LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A

i..........i
i

Ao ,o

i L,NE00T
¢i
i

Cable

=
=

ooo

Adapter--_

®®

Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the LINE
OUT jack on your stereo.

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.
B

i¢....

[]
@[-_

Audio
Cable

"--

RCA____
Adapter
Adapter'P_er [

Wire removed from _i.___._=._
LINE OUT jack

Cable

-- Y adapts

Headp hones/Speakers _c::x:_

HOW TO CONNECT YOUR VCR
Note: if your VCR has an unused AUDIO OUT jack,
see instruction A below, if the AUDIO OUT jack is
being used, see instruction B. if you have a TV
with a built-in VCR, see instruction B. if your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 16.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.

....
HOW TO USE IFIT,COM CD AND VIDEO
PROGRAMS

To use iFit.com CD's or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER on page
15. Note: To purchase iFit.com CD's or iFit.com
videocassettes,
call toll=free 1=800=735=0768.
Follow the steps below to use an iFit.com CD or video
program.

A
B
AUDiOOUT

Insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
Select the iFit.com

mode.

When the key is inserted, the manual
mode will be selected
and the manual indica-

CrossTraini.c

CAROIOJOG

tor will light. To use
iFit.com CD's or videoB. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.

.....

cassettes, press the
Select Workout button repeatedly until the iFit.com
indicator lights.
Insert the iFit.com CD or videocassette.
If you are using an iFit.com CD, insert the CD into
your CD player. If you are using an iFit.com videocassette, insert the videocassette into your VCR.
Press the PLAY button on your CD player or
VCR.

RCA Adapter_
[]
@|

A moment after the button is pressed, your personal trainer will begin guiding you through your
workout. Simply follow your personal trainer's
instructions.

Audio
i

Cable

Adapter

Wire removed from_
AUDIO OUT jack

During the CD or video program, an electronic
"chirping" sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the "chirp" and be
prepared for speed and/or incline changes. In
some instances, the speed and/or incline may
change before the personal trainer describes
the change.

If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next "chirp" is
heard, the speed and/or incline will change to
the next settings of the CD or video program.

Follow your progress

To stop the walking belt at any time, press a Stop
button on the console. The Time/Segment Time
display will begin to flash. To restart the program,
press the Start button. After a moment, the walking belt will begin to move at 1.0 mph. When the
next "chirp" is heard, the speed and incline
will change to the next settings of the CD or
video program. The program can also be
stopped by pressing the Stop button on your CD
player or VCR.

Step onto the foot rails and make sure that the incline of the treadmill is at 1.5%. The incline must
be at 1.5% when the treadmill is raised to the

When the CD or video program is completed, the
walking belt will stop and the Time/Segment Time
display will begin to flash. Note: To use another
CD or video program, press a Stop button or remove the key and go to step 1 on page 17.
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard:
o make sure that the iFit.com indicator
that the Time/Segment
flashing

is lit and

Time display is not

adjust the volume of your CD player or VCR. If
the volume is too high or too low, the console
may not detect the program signals
,, make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord
if you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console.

with the four displays.

See step 5 on page 11.
When the program
key.

is completed,

remove the

HOWTO USE PROGRAMS DIRECTLY FROM
OUR INTERNET SITE

Our new internet site at www.iFit.com allows you to
access a selection of programs that interactively control your treadmill to help you achieve your specific exercise goals. In addition, you can play iFit.com audio
and video programs directly from the intemet. By
adding an optional upgrade module to the console, you
can use virtually endless features on our internet site.
Explore www.iFit.com for details. To purchase an upgrade module, call toll-free 1-800-735-0768.
To use programs from our internet site, the treadmill
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 16. In
addition, you must have an intemet connection and
an internet service provider. A list of specific system
requirements will be found on our internet site.
Follow the steps below to use a program from our
internet site.

Insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
Select the iFit.com mode.
When the key is inserted, the manual
mode will be selected
and the manual indica-

c,ossTral.i._

tor will light. To use a
program from our internet site, press the
Program Select button repeatedly until the
iFit.com indicator lights.
Go to your computer
connection.

and start an internet

eturn to the treadmill and stand on the foot
rails. Find the clip attached to the key and slide
the key onto the waistband of your clothing.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking.
During the program, an electronic "chirping" sound
will alert you when the speed and/or incline of the
treadmill is about to change. CAUTION: Always
listen for the "chirp" and be prepared for speed
and/or incline changes.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next "chirp" is
heard, the speed and/or incline will change to
the next settings of the program.
To stop the walking belt at any time, press a Stop
button on the console. The Time/Segment Time
display will begin to flash. To restart the program,
press the Start button. After a moment, the walking belt will begin to move at 1.0 mph. When the
next "chirp" is heard, the speed and incline will
change to the next settings of the program.
When the program is completed, the walking belt
will stop and the Time/Segment Time display will
begin to flash. Note: To use another program,
press a Stop button and go to step 5.
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard, make
sure that the iFit.com indicator is lit and that
the Time/Segment Time display is not flashing.
In addition, make sure that the audio cable is
properly connected, that it is fully plugged in,
and that it is not wrapped around a power cord.
Follow your progress

with the four displays.

Start your web browser, if necessary, and go to
our internet site at www.iFit.com.

See step 5 on page 11.

Follow the desired links on our internet site to

When the program has ended, remove the key.

select a program.
Read and follow the on-line instructions for using a
program.
Follow the on=line instructions to start the
program.
When you start the program, an on-screen countdown will begin.

Step onto the foot rails and make sure that the incline of the treadmill is at 1.5%. Remove the key
from the console and put it in a safe place. Note: If
the displays and indicators on the console remain lit after the key is removed, the console is
in the "demo" mode. Refer to page 20 and turn
off the demo mode.
Next, move the on/off switch near the power cord
to the off position and unplug the power cord.

THE INFORMATION MODE/DEMO MODE

THE OPTIONAL CHEST PULSE SENSOR

The console features an information mode that keeps
track of the total number of hours that the treadmill has

An optional chest pulse sensor adds even more
features to the console. The chest pulse sensor continuously monitors your heart rate during your workouts
and allows you to use the console's two pulse programs. To purchase the optional chest pulse sensor, call toll=free 1-800-201-2172.

been operated and the total number of miles that the
walking belt has moved. The information mode also allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down one of the
Stop buttons while inserting the key into the console.
When the information mode is selected, the following
information will be shown:
The Time/Segment Time
display will show the total
number of hours that the
treadmill has been used.

/ =sEGME=TT'ME
/ I

I L_

crQ_

• I

THE OPTIONAL
The Distance/Incline display
will show the total number of
miles that the walking belt
has moved.

an "M," for metric kilometers,
will appear in the Speed display. Press the Speed
button tO change the unit of
measurement.

PEED

IMPORTANT: The
Calories/Pu Ise display
should be blank. If a "d"
appears in the display, the
console is in the "demo"
mode. This mode is intended to be used only
when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a "d" appears
in the Calories/Pulse display when the information
mode is selected, press the Speed V button so the
Calories/Pulse display is blank.
To exit the information mode, remove the key from the
console.

HANDGRIP PULSE SENSOR

An optional handgrip pulse sensor
allows you to conveniently measure
your heart rate before you begin exercising, during
your workout, and
after you finish. To
purchase the optional chest pulse
sensor, call tollfree 1-800-201-2172.
Note: The console's pulse programs can be used
only with the optional chest pulse sensor.

HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL

FOR STORAGE

Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
Caution: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill in the locations shown at the right. To
decrease the possibility of injury, bend your legs and
keep your back straight. As you raise the treadmill,
make sure to lift with your legs rather than your back.
Raise the treadmill about halfway to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the lock knob to
the left and hold it. Raise the treadmill until all parts of the
treadmill are past the latch pin. Release the lock knob.
Make sure that the lock knob is fully released so the
latch pin is securely holding the catch.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the stor=
age position in temperatures above 85 ° Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the
storage position as described above. Make sure that the
latch pin is securely holding the catch.
1. Hold the handrails and place one foot on the base.
2. Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution while
moving the treadmill. Do not attempt to move the
treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.

Base
Front Wheels

HOW TO LOWER THE TREADMILL

FOR USE

1. Hold the treadmill with your right hand as shown. Using
your left hand, pull the lock knob to the left and hold it.
Pivot the treadmill down until all parts of the treadmill are
past the pin. Slowly release the lock knob.
2. See the drawing at the top of this page. Hold the treadmill
firmly with both hands, and lower the treadmill to the
floor. To decrease the possibility of injury, bend your
legs and keep your back straight.

TROUBLE-SHOOTING

AND MAINTENANCE

Most treadmill problems can be solved by following the instructions below. If further assistance is
needed, please call our Customer Service Department toll=free at 1=800=999=3756, Monday through Friday,
6 a.m. until 6 p.m. Mountain Time (excluding holidays).
PROBLEM

SOLUTION

1. The power does not
turn on

Make sure that the power cord is plugged into a surge protector, and that the
surge protector is plugged into a properly grounded outlet. (See page 7.) Use only
a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or
less in length.

b. Make sure that the key is fully inserted into the console.
C.

Check the circuit breaker located on the frame near
the power cord. If the switch protrudes as shown, the
circuit breaker has tripped. To reset the circuit
breaker, wait for five minutes and then press the
switch back in.

d. Check the on/off switch located on the frame near
the power cord. The switch must be in the on position.

2. The power turns off
during use

Tripped

Reset

Ony

Position

a. Check the circuit breaker located on the treadmill frame near the power cord (see
1. c. above). If the circuit breaker has tripped, wait for five minutes and then press
the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console and then reinsert it.
d. Make sure that the on/off switch is in the on position (see 1. d. above).

3. The walking belt
slows when walked
on

Make sure that only an appropriate surge protector is used (see 1. a. above).

b. If the walking belt is overtightened, treadmill performance may decrease and the
walking belt may be permanently damaged. Remove the key and UNPLUG THE
POWER CORD. Using the included allen
wrench, turn both rear roller adjustment
bolts counterclockwise 1/4 of a turn.
When the walking belt is properly tightened, you should be able to lift the edges
Rear Roller Adjustment Bolts
of the walking belt 3 to 4 inches off the
walking platform. Be careful to keep the walking belt centered. Plug in the power
cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

PROBLEM

SOLUTION

4. The walking belt is
off=center or slips
when walked on

5. The displays of the
console do not func=
tion properly

6. Bubbles
walking

form in the
belt

If the walking belt has shifted to the
a
left, first remove the key and UNPLUG
THE POWER CORD. Using the allen
wrench, turn the left rear roller adjustment
bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful
not to overtighten the walking belt. Plug in
the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is centered.
If the walking belt has shifted to the
b
right, first remove the key and UNPLUG
THE POWER CORD. Using the allen
wrench, turn the left rear roller adjustment
bolt counterclockwise, and the right bolt
clockwise, 1/4 of a turn each. Be careful
not to overtighten the walking belt. Plug in
the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is centered.
If the walking belt slips when walked
c
on, first remove the key and UNPLUG
THE POWER CORD. Using the allen
wrench, turn both rear roller adjustment
bolts clockwise, 1/4 of a turn. When the
walking belt is correctly tightened, you
should be able to lift the edges of the
walking belt 3 to 4 inches off the walking
platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt
is properly tightened.

L_...... .........................
E// I
Remove the key from the console and UN=
PLUG THE POWER CORD. Next, remove
1/8"-the screws from the hood and carefully remove the hood. Locate the Reed Switch
(26) and the Magnet (85) on the left side of
the Pulley (28). Turn the Pulley until the
TO
_
Magnet is aligned with the Reed Switch.
Make sure that the gap between the
Magnet and the Reed Switch is about
1/8". If necessary, loosen the Reed Switch
Screw (2) and move the Reed Switch slightly. Retighten the Screw. Re-attach the
hood, and run the treadmill for a few minutes to check for a correct speed reading.

a. Due to variations in humidity and temperature, there is a possibility that
bubbles may form in the walking belt. Although the bubbles will disappear with
time, you may unplug the power cord, carefully insert a needle into the bubbles,
and push the air out of the bubbles.

CONDiTiONiNG
WARNING:

GUiDELiNES
Before
beginning
this

or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems.

The following guidelines will help you to plan your exercise program. For more detailed exercise information, obtain a reputable book or consult your physician.

During the first few minutes of exercise, your body
uses easily accessible carbohydrate caloriesfor energy. Only after the first few minutes does your body
begin to use stored fatca/or/esfor energy. If your goal
is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in
your training zone.
For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.
Aerobic Exercise

EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.

HEART

RATE

AEROBIC

MAXFATBURN

FAT BURN

£r

TRAINING
il

Age

ZONES

!65

155

145

140

I30

125

115

145

138

130

125

118

110

103

iT5

105

125
20

To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your "training zone." The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
HOW TO MEASURE
YOUR HEART RATE
To measure your heart
rate, stop exercising and
place two fingers on
your wrist as shown.
Take a six-second
heartbeat count, and
multiply the result by ten to find your heart rate. (A sixsecond count is used because your heart rate drops
quickly when you stop exercising.) If your heart rate is
too high or too low, adjust the speed or incline of the
treadmill.
Fat Burning

If your goal is to strengthen your cardiovascular system, your exercise must be "aerobic." Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone.

To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.

WORKOUT GUIDELINES
Each workout should include the following three parts:
A Warm-up--Start
each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise.
Training Zone ExerciseRAfter
warming up, increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exercise--never
hold your breath.
A Cool-down--Finish

each workout with 5 to 10 min-

utes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-exercise problems.
Exercise

Frequency

To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired.
The key to success is to make exercise a regular and
enjoyable part of your everyday life.

SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch--never

bounce.

1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, back of knees
and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg.
Reach toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times for each leg. Stretches: Hamstrings,
lower back and groin.
3. Calf/Achilles

Stretch

With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons and ankles.
4. Quadriceps

Stretch

With one hand against a wall for balance,
one foot with your other hand. Bring your
buttocks as possible. Hold for 15 counts,
times for each leg. Stretches: Quadriceps

reach back and grasp
heel as close to your
then relax. Repeat 3
and hip muscles.

5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps
and hip muscles.

PART LiST--Model

No. HRTL09990

R0100A

To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.

Key
No.

Qty.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34*
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

1
11
6
9
1
2
4
4
2
2
1
2
2
2
1
1
1
1
2
11
4
1
1
1
1
1
1
1
1
2
1
1
1
1
16
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1

Description

Key
No.

Qty.

Motor Hood
Hood Screw
Platform Screw
Platform Washer
Latch Catch
Latch Catch Screw
Isolator
Belt Guide Screw
Belt Guide
Frame Pivot Bolt
Front Roller/Pulley
Incline Motor Spacer
Incline Motor Bolt
Incline Motor Nut
Incline Motor
Front Roller Adj. Nut
Pulse Mounting Plate
Front Roller Adj. Bolt
Side Hood Tab
Hood Tab Screw
Hood Tab Clip
Front Hood Tab
Reed Switch Clip
Motor
2-lb. Hand Weight
Reed Switch
Motor Belt
Pulley/Flywheel/Fan
Motor Tension Bolt
Motor Tension Washer
Motor Star Washer
Motor Tension Nut
Motor Pivot Bolt
Motor/Pulley/Flywheel/Fan
Screw
Choke
Choke Plate
Circuit Breaker
On/Off Switch
Power Cord
Power Cord Grommet
Outlet Bracket
Controller
Power Supply
Plastic Stand-Off
Electronics Bracket
Belly Pan
Upright Wire Harness
Right Foot Grip
Walking Belt

51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

1
2
2
2
2
1
1
2
2
1
1
1
2
2
2
2
1
1
1
1
1
1
1
3
1
8
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
4
5
5
1
2
3
2
2
2

Description
Frame
Rear Wheel
Rear Wheel Bolt
Rear Roller Guard
Rear Wheel Nut
Rear Roller
Right Endcap
Rear Roller Adj. Washer
Rear Roller Adj.Bolt
Left Endcap
Allen Wrench
Walking Platform
Handrail Grip
Handrail Grip Screw
Crossbar Bolt
Crossbar Washer
Lock Knob
Lock Knob Sleeve
Lock Spring
Lock Knob Collar
Pin Clip
Lock Pin
Crossbar
Console Base Screw
Console Base Cover
Cover Screw
Pulse Sensor Cover
Sensor Cover Screw
Key/Clip
Console Base
Book Holder Lens
Console
Lift Frame
Releasable Tie
Magnet
Cable Tie
8" Power Wire
8" Cable Tie
Jack
10' IFit.com Wire
Lift Frame Bolt
Plastic Washer
Lift Frame Nut/Wheel Nut
Base Pad
Left Foot Grip
Upright Base Cap
Warning Decal
Wheel Bolt
Base Wheel
Wheel Insert

Key
No.

Qty.

101

12" Audio Wire

102
103
104

1
1
1

Large Warning Decal
Upright Base
Shock

105
106
#
#
#
#
#
#

2
2
1
1
1
1
1
1

Lift Frame Spacer
Endcap Spacer
8" Green Wire, 2 Ring
8" Green Wire, F/Ring
4" Green Wire, F/Ring
20" Blue Wire, 2 F
8" Blue Wire, 2 F
8" Blue Wire, M/F

Description

Key
No.

Qty.

#
#
#
#
#
#

1
1
1
1
1
1

Description
4" Black Wire, 2 Female
8" Black Wire, M/F
20" White Wire, M/F
8" White Wire, 2 Female
8" Red Wire, M/F
User's Manual

*Includes all parts shown in the box.
#These parts are not illustrated
Specifications

HOW TO ORDER REPLACEMENT

are subject to change without notice.

PARTS

To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). Before calling, please note the following
information:
- The MODEL NUMBER of the product (HRTL09990).
• The NAME of the product (HealthRide¢ _SOFTSTRIDER

S300F Mtreadmill).

- The SERIAL NUMBER of the product (see the front cover of this manual).
- The KEY NUMBER and DESCRIPTION of the replacement part(s) (see the PART LIST on pages 26 and 27
and the EXPLODED DRAWING attached in the center of this manual).

EXPLODED

DRAWINGmlVlodel

No. HRTL09990

RolooA

37
36
38

44
1(35

16
1O5

5O
49

6O
\

i
59

106
4
59,

EXPLODED

DRAWINGmlVlodel

No. HRTL09990

RolooA

"'_76
75

63
\

"\
17
8O

79
76

93
_76
_84

1O0
99

_._86

LiMiTED WARRANTY
WHAT IS COVERED--The entire HealthRide¢ _SOFTSTRIDER
all defects in material and workmanship.
WHO IS COVERED--The

S300i TM treadmill ("Product") is warranted to be free of

original purchaser or any person receiving the Product as a gift from the original purchaser.

HOW LONG IS IT COVERED--ICON
Health & Fitness, Inc. ("ICON"), extends a lifetime warranty on the frame. The
motor is covered for three years after the date of purchase. The belt and deck are covered for two years after the date
of purchase. All mechanical components are covered for two years after the date of purchase. All electrical components
are covered for two years after the date of purchase. Labor is covered for one year.
WHAT WE DO TO CORRECT COVERED DEFECTS--We will ship to you, without charge, any replacement part or
component, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized
service provider, or, at our option, we will replace the Product.
WHAT IS NOT COVERED--Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation, alterations, modifications without our written authorization or by failure on your part to
use, operate, and maintain as set out in your User's Manual ("Manual"). This warranty does not extend to products used
for commercial or rental purposes or to products used as store display modules.
WHAT YOU MUST DO--Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the
Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.
USER'S MANUAL--It
is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product.
Remember to do the periodic maintenance requirements specified in the Manual to assure proper operation and your
continued satisfaction.
HOW TO GET PARTS AND SERVICE--Simply call our Customer Service Department at 1-800-999-3756 and tell them
your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange for service where your Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return Authorization Number (RA No.) from our Customer Service Department; securely pack
your Product (save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the
product. Include a letter explaining the product or problem and a copy of your proof of purchase if you believe the service is covered by warranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the
use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or
profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature.
Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability
or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not
allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321=9813

HealthRide¢

Part No. 157679 R0100A

is a registered trademark of ICON Health & Fitness, Inc.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 30
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Thu Mar 12 04:19:18 2009
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Healthrider HRTL09990 User Manual Manuals And Guides L0902611

HEALTH RIDER Treadmill Manual L0902611 HEALTH RIDER Treadmill Owner's Manual, HEALTH RIDER Treadmill installation guides

HRTL09990 L0902611

Navigation menu

Versions of this User Manual:

Views

Navigation