HeathCo WLTX207 Wireless Door Chime Transmitter User Manual 208198 01A

HeathCo LLC Wireless Door Chime Transmitter 208198 01A

User Manual

DRAFT COPYTHANK YOU We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this wireless push button. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!USE AND CARE GUIDEWIRELESS PUSH BUTTONIllustrations may vary from actual unit.Safety Information1. Please read and understand this entire manual before attempting to assemble, install, or operate this push button.WARNING: To prevent possible SERIOUS INJURY or DEATH never allow small children near batteries. If battery is swallowed, immediately notify a doctor.NOTE: The range of the wireless doorbell can vary with location, temperature, and battery condition.This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The user is cautioned that changes or modications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.Care and Cleaning ƑUse a dry cloth to clean the push button. ƑDo not use cleaners or polishes. ƑDo not use any uids on the push button.Pre-InstallationTOOLS REQUIREDPhillips screwdriver Small athead screwdriverPACKAGE CONTENTSPart Description QuantityA Push button 1B Jumper 1C Screw 2D Double-sided tape 1Battery - pre-installed (not shown) 1Installation1 Removing the battery tab Remove the back of the push button by pushing in the tab on the bottom with a small screwdriver (not included). Remove the orange battery tab from the push button.2 Syncing the push button and doorbell Press and hold the “SYNC” button on the doorbell until the doorbell sounds a “Beep-Beep”. Press the push button within 30 seconds. The doorbell will sound a “Beep-Beep” tone to indicate the push button is synced. Press the push button to conrm sync. If the doorbell sounds, sync is complete.SYNC – PRESSAND RELEASE.RESET – HOLD 10 SECONDS.TUNE – HOLD 1 SECOND.303 Testing the push button and doorbell Temporarily position the push button where you want it mounted. Press the push button to verify the doorbell and push button work properly. If the doorbell does not sound, see Troubleshooting.NOTE: Do not permanently mount the push button until the push button and doorbell are working properly.SYNC – PRESSAND RELEASE.RESET – HOLD 10 SECONDS.CHIME VOLUMETUNE – HOLD 1 SECOND.UPFRONT TRANS REARTYPE “C”TYPE “C”TYPE “C”Warranty3-YEAR LIMITED WARRANTYWHAT IS COVEREDThis product is guaranteed to be free of factory defective parts and workmanship for a period of 3 years from date of purchase. Purchase receipt is required for all warranty claims.WHAT IS NOT COVEREDThis warranty does not include expendable items (such as light bulbs, batteries, etc.), repair service, adjustment and calibration due to misuse, abuse or negligence. Unauthorized service or modication of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty is not extended to other equipment and components that a customer uses in conjunction with this product.Contact the Customer Service Team at 1-844-760-3644 or visit www.hamptonbay.com.Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday1-844-760-3644HAMPTONBAY.COMInstallation4 Mounting the push buttonUse either screws or double-sided tape to mount the push button. To mount with screws, remove the back of the push button by pushing in the tab on the bottom with a small screwdriver. Place the push button back on the door jamb and mark the two screw holes. Attach with screws and snap on the front of the push button. When attaching the push button with double-sided tape, remove paper from both sides of the double-sided tape and apply to a clean surface.5 Selecting a tuneWireless doorbells have different selectable tunes. The wireless push button can be set to play one of those tunes by adding or removing the jumper inside the push button. See the table below for tune selection.Doorbell SoundPush Button Jumper ON Rear doorPush Button Jumper OFF (factory default) Front doorNOTE: Refer to the doorbell manual for available tunes. Push Button Push Button Jumper OFF Jumper ONSpecicationsPower requirements Type 2032 3V batteryTroubleshootingProblem SolutionThe doorbell does not sound. Make sure batteries are installed according to the diagram inside the push button and doorbell (if applicable).Check the charge of the push button and doorbell batteries (if applicable) and replace if necessary.Make sure the plug-in doorbell has power (if applicable).Push button and doorbell are not synced. Follow step 2 under installation to sync.The batteries seem okay, but the doorbell does not work after installation.Metal reduces transmission range. Use 1/4 in. to 1/2 in. (6 to 13 mm) wood shims to move the doorbell or push button away from the metal surface.Concrete may reduce range. Move the doorbell away from the concrete surface.Locate the doorbell closer to the push button.208198-01AABCDItem #1000 000 000 Model #HB-7707-02Item #1000 000 000 1000 000 000 Model #HB-7705-02 HB-7706-02

Navigation menu