Hejiaxing Electronics U8 Wireless Wristband User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3520817
Application ID	hE40BPfcsQbLB5qtZUm3Ag==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	194.22kB (2427764 bits)
Date Submitted	2017-08-22 00:00:00
Date Available	2017-08-22 00:00:00
Creation Date	2017-08-03 01:40:17
Producing Software	3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document Lastmod	2017-08-16 09:01:16
Document Title	User Manual
Document Creator	CorelDRAW
Document Author:	Administrator

Wireless Wrist Band operation guidance
1、Wear the wrist band as below:
4.Connecting the Activity tracker to the APP
2.Parameters:
one second
Use the supplied charger to charge smart wristband. Once
connected properly your device will display “Charging” as
below.
4.2.Tap the “connection setting” then it displays as below
picture.
4.3.Tap/click on the screen twice to activate the screen, the
App will automatically search for your smart wristband.
Distance walked
Once your device is successfully paired with the activity
tracker, the APP will display a green LED“√” on the top
left hand conner. And the activity tracker will also display
the bluetooth logo on the screen.
one second
3、Screen display introduction
3.1.To activate the screen, tap/click on the screen twice
to display the time as below.
Auto Upload
Time walked
Searching Device...
Auto Upload
one second
Searching Device...
Auto Upload
Searching Device...
Steps Goal
3.2 Tap/click on the screen again to switch between the
following modes.
4.4Enter search Bluetooth device status，When software
appears "SmartFit--xx:xx ",click on the green "connection",
the App will has a countdown of 10 seconds display,this is
the Android system connection method. IOS system only
need to click on "connection".
Bluetooth searching name
3.3.Tap/click on the screen four times to enter the sleep
mode.
one second
SmartFit--xx:xx
Downloading app from mobile phone:
one second
Steps taken
4.6. Once the countdown begins, tap on the activity tracker
screen in order to repair. SYNC will appear on the activity
tracker screen once paired successfully.
3.4.Tap/click on the screen four times to exit the sleep
mode, and enter the “Time Display”
ANDROID APP ON
one second
one second
Calories burned
Available on the
App Store
5、APP interface introduction
sedentary reminder
6.Data Sync
5.1 There are 4 main features will be displayed on the main
page, include “ steps teken”, “Calories burned”, “ Distance
walked”and “Time walked” in the day.
drinking reminder
Tracker is accessory with adsorbed back clip type USB
charging base
The smart wristband will vibrate for
3 seconds during reminders. Click on the screen once to
stop the reminder.
When charging,insert the USB port to USB adaptor or USB
power port(USB output port of computer),another head
attach to the back charging area,the back clip has adsorbed
function(no left and right direction,see below charging way)
Common problems and solutions
FCC STATEMENT :
The screen can not be light up or activated.
Please charge the tracker and keep it has enough
battery power
Tracker can not connect to the APP
Please check your phone’s version. It should be IOS
8.0 or higher versions, and android 4.3 or higher
versions. If the tracker already paired with other
devices, then disconnect it first.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Attentions:
Charging the band
5.2 Press “
” to enter the activity record menu. This
menu will show you all activities on a daily, weekly, or
monthly basis.
5.3 Press “
” to enter the Sleep record menu. This
menu will show you all your sleep activities on a daily,
weekly, or monthly basis.
6.3 The App is equipped with 2 alarm settings: The smart
wristband will vibrate for 10 seconds during reminders.
Click on the screen once to stop the reminder
Once connected properly your activity tracker will display
“Charging” as the picture below. The manufacturer already
did the current limit protection on the tracker, so it won’t
cause damage due to large current. Please charge it in the
correct way.
Please use the accessory charging device to insure tracker
in good performance. If product damaged due to you
change the charging device privately or use the other
charging device which is not offered by the orginal factory,
it’s not in the scope of warranty.
When charging,please keep it away from high
temprature,strong magnet,humid environment
When wrong operation or other reasons caused
disconnection with APP,please unpair it from tracker
or APP and pair it again
One tracker only can pair with one device When the
device is paired with other tracker,must unbundle it
firstly,then pair with new tracker
It won’t give a special declaration because of
software updating
APP is only compatible with IOS 8.0 or higher
versions,android 4.3 or hither verions.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : D:20170803014017Z
Author                          : Administrator
Creator                         : CorelDRAW
Title                           : 手环说明书0731.cdr
Modify Date                     : 2017:08:16 09:01:16Z
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Page Count                      : 1

EXIF Metadata provided by EXIF.tools