Heng Ke Metal Works V205 Wireless Vehicle Weighing Kit User Manual user manual

Heng Ke Metal Works Wireless Vehicle Weighing Kit user manual

User Manual

Wireless vehicle weighting kit manual Main features and parts 1. Four electronic weighting pads with wireless central process display unit. 2. Each weighting pad has a capacity of 1000 lbs.(454kg.) 3. Display unit operates with battery power (4AA). 4. Display indicates percentage (%) weight of each wheel relative to the total vehicle weight. 5. Display measures in lbs. or kg. for each wheel and the total vehicle weight. 6. Display in separate pages the cross, front, rear weight and percentage. 7. Display battery level for each individual pad and display box. 8. All information is shown on one LCD screen. Display format FR weight FL weight Battery level indicator RL percentage weight Total weight RR percentage weight RL weight FL percentage weight FR percentage RR weight
Display unit power on screen Set up configuration On /off Zero Unit Display box battery level indicator FL/RL pad battery indicator FR/RR pad battery indicator Signal strength Display box 4x wireless weighing pads 4x ramps FR RR FL RL
Operating instructions. 1. Open the display box, insert 4 AA batteries into the battery pack. 2. Open the battery door of each weighing pad and pull out the battery pack. 3. Insert 4 AA batteries into each battery pack, and reinsert them into each weighing pad. 4. Power on each weighing pad by pressing the small button near the handle of each pad. 5. The red LED light next to the handle should light up. If it looks dim or does not light up, replace with four new AA batteries. 6. Put the respective weighing pads next to the wheels to be weighed and make sure the wheels are in the direction of the yellow arrow printed on the pad and in the middle position of the pad edge, as shown in the set up configuration above. 7. Make sure that the correct pad is positioned in front of the corresponding wheel: FR, FL, RR, and RL -Front Right, Front Left, Rear Right, and Rear Left. The handle of each weighing pad should be pointing outward to the side of the car as shown in the set up configuration above. 8. Power on the LCD unit by pressing the “On/Off” button. Wait until the weight readings all show zero or press the “Tare” button to zero. Press “Kg/lb” to choose lbs. or kg. 9. Wait until the reading of weight all showing zero or press “Tare” to zero. Press “unit” to choose metric or imperial. The battery power level indicator shows a cage with 3 dots inside represent the batteries are with full power. If the display shows only the cage , replace the 4 x AA batteries 10. Lift the vehicle up and put the respective center of the pad under and align with the center of the tire. Never press “Tare” if the vehicle is on the pads otherwise the vehicle has to be removed and reset zero again. 11. While the car is on the pads. Shake each of the corners of the car up and down to relieve out any residue stress or friction within the chassis. 12. The car total weigh, individual weigh of each wheel load as well as it’s percentage to the total weigh will shown accordingly at once.(Screen #1) 13. Press the unit key and keep holding with one finger, press the tare key once. The display passes to screen#2 and give you the total front and rear weight in percentage. Press the tare once again will give screen#3 that gives you the total left and right weight in percentage. Press the tare again will give screen#4 and gives you the cross weight of left front rear right percentage. Again screen#5 will give the cross weight of right front left rear percentage. 14. Press on/off to power off the unit. 15. Press the button on each pad to turn off the pads. Make sure the red LED lights are all off.
Screen #1 Fr :Front weight percent Screen #2 Rr :Rear weight percent Lt :Left total percent Screen #3 Rt: Right total percent
Cross left front right rear percent Screen #4 Cross right front left rear percent Screen #5 For more information please visit www.proformparts.com or call our tech team (586)774-2500 9:00 a.m. to 5:00 p.m. EST. Email: tech@proformparts.com Specialty Auto Parts USA, Inc. | 26708 Groesbeck Hwy. | Warren, MI 48089 © 2011 Specialty Auto Parts USA, Inc. All Rights Reserved. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.

Navigation menu