Hetronic MFSERGO120 Wireless controller for industrial equipment User Manual
Hetronic International Inc Wireless controller for industrial equipment Users Manual
Hetronic >
Users Manual
Revision Modified Checked Module Name
Date By Date By ERGO-120
A Dec12-2016 AM
B-PTI Dec25-2018 EBL
Description
Coder Board with 10 front panel switches for 1-2 steps, Four
side switches, up to 2 STD,RFS,MFS,USB key and 2.4 inch
LCD or LED versions.
Remarks
Item Number
66709440
R&D
Technical
Documentation
Research and
Development
Technical Documentation
Revision Project: ERGO-120 Page
B Descriptio
n:
Coder Board with 10 front panel switches for 1-2 steps, Four
side switches, up to 2 STD,RFS,MFS,USB key and 2.4 inch
LCD or LED versions. 2 of 8
1. COMPLIANCE STATEMENTS
1.1. FCC Interference Statement (Part 15.105 (b))
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
1.2. FCC Part 15 Clause 15.21
“Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment”
1.3. FCC Part 15.19(a)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
1.4. ISED RSS-Gen Notice, ICES Notice:
(1) This device may not cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
1) l’appareil ne doit pas produire de brouillage; 2) l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.“
“CAN ICES-3 (B)/NMB-3(B)“
Research and
Development
Technical Documentation
Revision Project: ERGO-120 Page
B
Descriptio
n:
Coder Board with 10 front panel switches for 1-2 steps, Four
side switches, up to 2 STD,RFS,MFS,USB key and 2.4 inch
LCD or LED versions. 3 of 8
Research and
Development
Technical Documentation
Revision Project: ERGO-120 Page
B
Descriptio
n:
Coder Board with 10 front panel switches for 1-2 steps, Four
side switches, up to 2 STD,RFS,MFS,USB key and 2.4 inch
LCD or LED versions. 4 of 8
Research and
Development
Technical Documentation
Revision Project: ERGO-120 Page
B
Descriptio
n:
Coder Board with 10 front panel switches for 1-2 steps, Four
side switches, up to 2 STD,RFS,MFS,USB key and 2.4 inch
LCD or LED versions. 5 of 8
Research and
Development
Technical Documentation
Revision Project: ERGO-120 Page
B
Descriptio
n:
Coder Board with 10 front panel switches for 1-2 steps, Four
side switches, up to 2 STD,RFS,MFS,USB key and 2.4 inch
LCD or LED versions. 6 of 8
Research and
Development
Technical Documentation
Revision Project: ERGO-120 Page
B
Descriptio
n:
Coder Board with 10 front panel switches for 1-2 steps, Four
side switches, up to 2 STD,RFS,MFS,USB key and 2.4 inch
LCD or LED versions. 7 of 8
Research and
Development
Technical Documentation
Revision Project: ERGO-120 Page
B Descriptio
n:
Coder Board with 10 front panel switches for 1-2 steps, Four
side switches, up to 2 STD,RFS,MFS,USB key and 2.4 inch
LCD or LED versions. 8 of 8