Hetronic TX-TC1 2.4GHz Transceiver that receives remote control signals to operate machinery User Manual

Hetronic International Inc 2.4GHz Transceiver that receives remote control signals to operate machinery TC1 Rev02x

a href="https://usermanual.wiki/Hetronic" itemprop="url"> Hetronic >

User Manual

  User’s Manual  TC1
  1. PROJECT DESCRIPTION TC1 is a MFS 2.4GHz transmitter with 7 toggle switch inputs, 4 push-button inputs, a 4-step gray code trigger input and 2 analog-inputs. It can control any MFS 2.4GHz receiver using a 32DK packet. It transmits with an on-board PCB inverted-F antenna. It is powered by a 3.3V lithium-iron battery or optional Cable Control backup. TC1 also has an external docking station connection for local battery charging. Power is enabled by attaching the removable E-STOP cap. It has an optional Hetronic LCD module and can display MFS LCD feedback. The LCD and push button inputs also function as an interactive user menu system. TC1 also has an optional vibration motor output for alerting users to warning situations.  TC1 is H-Link configurable via 2.4GHz wireless link or on-board USB connection. The firmware is also upgradeable via on-board USB connection. All H-Link settings and menu options are saved to an on-board external EEPROM.  TC1 uses the MFS 2.4GHz communication protocol. The coder continually sends control packets at a 1%-10% duty cycle to the receiver and receives one feedback packet for every control packet. The control packets are sent on one of the sixteen IEEE 802.15.4 ISM-band channels, ranging from 2.405-2.480GHz. The channels and duty cycle are configured with the H-Link software. The packets are DSSS O-QPSK modulated using an on-board surface-mount transceiver and then amplified through an on-board surface-mount bi-directional RF Front End.  Note: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.  Note: The TC1 is shipped with the FCC/IC ID label attached. The FCC/IC ID label must not be removed. See Figure 3 for additional labeling information.  FCC ID Number: LW9-TX-TC1 IC ID Number: 2119B-TXTC1  This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.  Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Download:
Mirror Download [FCC.gov]
Document ID2443338
Application IDLQtzwgwivXYZs0oSnEK2jg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize25.52kB (318984 bits)
Date Submitted2014-11-13 00:00:00
Date Available2014-11-13 00:00:00
Creation Date2014-11-12 09:05:51
Producing SoftwareAcrobat Distiller 10.1.12 (Windows)
Document Lastmod2014-11-12 09:05:51
Document TitleMicrosoft Word - TC1 User Manual Rev02.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: ELifsey
FCC ID Filing: LW9-TX-TC1

Navigation menu