Hewlett Packard Enterprise AP134135 IEEE 802.11 a/b/g/n User Manual Professional Installation Guide

Download:
Mirror Download [FCC.gov]
Document ID	1460684
Application ID	tStrNViKuG+CcWbwbk9BAg==
Document Description	Professional Installation Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.91kB (86321 bits)
Date Submitted	2011-05-07 00:00:00
Date Available	2011-05-09 00:00:00
Creation Date	2017-11-05 17:30:29
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-05 17:30:29
Document Title	Microsoft Word - AP-134-135_ProfInstall-Instruction.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	itankov

Professional installation Guide
Product/s covered in this guide:
Device: AP-134 and AP-135 are part of the Aruba’s AP-130 family, implementing dual radio cards
each 2x2 MIMO supporting IEEE 802.11 a/b/g/n operation.
IMPORTANT - Visit Aruba Support web page for the latest information and documentation related to
this product.
IMPORTANT – Please read this document before installing and using your product.
This device must be installed and used in strict accordance with the manufacturer's instructions. Only
approved by the manufacturer power adapters must be used. For replacement, contact your supplier or
distributor.
Installation of this product must comply with local regulations and codes. When this product is used
with external antenna/s, please refer to the installation documentation provided for the antenna/s.
Changes or modifications to the device not approved by the manufacturer of the product could void
the user’s authority to operate the equipment and will void the warranty of the product. No user
serviceable parts; all repairs and service must be handled by a qualified service center.
All products using external antennas must be professionally installed, and the transmit power of the
system must be adjusted by the professional installer/s to ensure that the system’s EIRP is in
compliance with the limit specified by the regulatory authority of the country of deployment.
During deployment of the system and its initial setup, professional installer must ensure that the
allowed EIRP limit is not exceeded (in the Country of exploitation of this equipment). To achieve this
professional installer must use approved and recommended by the Manufacturer antennas,
1. AP-ANT-1B
Dual Band - 2.4GHz, 3.8dBi; 5GHz, 5.8 dBi - Omnidirectional;
2. AP-ANT-13B
Dual Band - 2.4GHz, 4.4dBi; 5GHz, 3.3 dBi - Omnidirectional;
3. AP-ANT-16
Dual Band - 2.4GHz, 3.9dBi; 5GHz, 4.7 dBi – Omnidirectional 3x3 MIMO;
4. AP-ANT-17
Dual Band - 2.4GHz, 6.0dBi; 5GHz, 5.0 dBi – Directional 3x3 MIMO;
5. AP-ANT-18
Dual Band - 2.4GHz, 7.0dBi; 5GHz, 7.5 dBi – Directional 3x3 MIMO;
6. AP-ANT-19
Dual Band - 2.4GHz, 3.0dBi; 5GHz, 6.0 dBi - Omnidirectional;
7. AP-ANT-93
5 GHz, 14.0 dBi – Directional;
and enter Antenna gain in the software using to setup and mange the product. In additional attenuation
between the device and antenna may have to be measured or calculated.
The following formula can be used to calculate from EIRP limit related RF power based on selected
antennas (antenna gain) and feeder (Coaxial Cable loss):
EIRP = Tx RF Power (dBm) +GA (dB) - FL (dB);
EIRP –> limit specific for each Country of deployment
Tx RF Power –> RF power measured at RF connector of the unit
GA –> Antenna gain
FL -> Feeder loss (including the connectors’ loss)
Antenna Types and Maximum Antenna Gains
Frequency Band
Type
Dipole/Omni
2.4 GHz
Directional
5 GHz
Gain (dBi)
Dipole/Omni
Directional
Note: Antenna information provided above reflect approved antennas for initial release of the
device. For full list of antennas approved/recommended by the Manufacture please visit the
Aruba Networks Inc. web site.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : itankov
Create Date                     : 2011:04:11 18:24:00-07:00
Modify Date                     : 2011:04:11 18:24:30-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:04:11 18:24:30-07:00
Format                          : application/pdf
Title                           : Microsoft Word - AP-134-135_ProfInstall-Instruction.docx
Creator                         : itankov
Producer                        : Acrobat Distiller 9.4.2 (Windows)
Document ID                     : uuid:2d67160a-f3a8-4922-a9a6-c8107cce2e44
Instance ID                     : uuid:30f084f2-3bee-4b40-a42d-786a71230693
Page Count                      : 1

EXIF Metadata provided by EXIF.tools