Hewlett Packard Enterprise AP65 802.11 a/b/g Wireless Access Point User Manual 0500133 A65 IG indd
Aruba Networks, Inc. 802.11 a/b/g Wireless Access Point 0500133 A65 IG indd
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 594259 |
| Application ID | tUx2bMgCI8skoG3pz1V+DQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 22.29kB (278686 bits) |
| Date Submitted | 2005-10-20 00:00:00 |
| Date Available | 2005-10-19 00:00:00 |
| Creation Date | 2005-09-14 17:13:35 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2005-10-14 13:58:18 |
| Document Title | 0500133 A65 IG.indd |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | KJENSEN |
Aruba 65 Wireless Access Point Quick Installation Guide AA Installation instructions for the deployment and installation of your Aruba 65 802.11a/b/g wireless access point. Connecting Required Cables AruArub Provisioning using DHCP with Vendor Specific Options About the Aruba 65 A standards compliant DHCP server can be configured to return the host Aruba Mobility Controller’s IP address through Vendor Specific Options (option 43) in the DHCP reply. If the host Mobility Controller’s IP address is obtained via DHCP, it will be used for uploading the Aruba access point’s software image and configuration. The Aruba 65 is part of a comprehensive wireless network solution. The device works only in conjunction with an Aruba Mobility Controller, and provides the following capabilities: • Wireless transceiver • Protocol-independent networking functionality • IEEE 802.11a and IEEE 802.11b/g operation as a wireless Access Point • IEEE 802.11a and IEEE 802.11b/g operation as a wireless Air Monitor • Compatible with IEEE 802.3af Power Over Ethernet (POE) • Can be centrally managed, configured, and upgraded through an Aruba Mobility Controller PACKAGE CONTENTS • 1 x Aruba 65 Wireless Access Point • 1 x Quick Installation Guide (this document) Inform your supplier if there are any incorrect, missing or damaged parts. If possible, retain the carton, including the original packing materials. Use them to repack the product in case there is a need to return it. 1 Provisioning the Aruba 65 Aruba Networks, in compliance with governmental requirements, has designed the Aruba 65 such that only authorized network administrators can change these settings. For more information on Access Point configuration, refer to the ArubaOS User Guide. CAUTION: Access Points are radio broadcast devices and as such are subject to governmental regulation. Network administrators responsible for the configuration and operation of Access Points must comply with local broadcast regulations. Specifically, Access Points must use channel assignments appropriate to the location in which the Access Point will be used. Goal of Access Point Provisioning BEFORE GETTING STARTED Before installing your Aruba 65 wirless access point, please ensure you have the following: • 1 x Fast Ethernet cable of required length Provisioning provides the Aruba access point with basic network settings that allow it to locate the host Aruba Mobility Controller. Initial provisioning may be achieved through a number of methods, including: - Aruba Discovery Protocol (ADP) - DNS - DHCP with Vendor Specific Options • 1 x 802.3af compliant Power over Ethernet source (PSE) - Aruba Mobility Controller or Midspan device • 1 x Aruba Mobility Controller provisioned on the network: - with Layer 2/3 network connectivity your Aruba 65 - One of the following network services: - Aruba Discovery Protocol (ADP) - DNS server with an “A” record (see section 1; Provisioning the Aruba 65) - DHCP Server with vendor specific options (see section 1; Provisioning the Aruba 65) Optional: • Mounting screws (not supplied) Aruba Discovery Protocol (ADP) This is the simplist method for AP provisioning. ADP allows Aruba access pionts to be connected to the network (or directly to a Aruba Mobility Controller) and brought into operation automatically. NOTE: Additionally, the access point software can be uploaded via a standard TFTP server. ADP with Directly / Layer 2 Connected Access Points The Aruba AP Setup Process AA Setting up an Aruba AP typically consists of a planning stage and three AP installation stages: NOTE: If you have location-specific configurations for your Access Points, you will need to apply this configuration information using AP Reprovisioning. The 10/100 Mbps Ethernet (FE) port is used to connect the AP to a 10Base-T/100Base-TX (twisted-pair) Ethernet LAN segment. Use a 4- or 8-conductor, Category 5 UTP, straight-through FE cable.X and automatically adjusts for straight-through or crossover cables. The maximum length for FE cables is 100 meters (325 feet). Install cables in accordance with all applicable local and national regulations and practices. AP Reprovisioning Connect one end of the FE cable directly to the Aruba 65 FE port Connect the other end of the FE cable to one of the following: - To a network port on the Mobility Controller, or - To a network mid-span device that supports 802.3af compliant port Once an AP is associated to an Aruba Mobility Controller, it is capable of being Reprovisioned if necessary. AP Reprovisioning is the process by which APs are assigned unique configuration characteristics, for example, location codes. Location codes are important for recalibration and triangulation. For details on AP Reprovisioning, see the ArubaOS User Guide. AP Provisioning Recommended only in instances where APs require to be pre-staged or provisioned in advance of shipment and final network installation (suchas as Remote Access Point (RAP) deployments), in AP programming mode, AP configuration parameters are defined on the Aruba Mobility Controller via command line interface or web interface, where they can then be uploaded to individual access points as required. If your Aruba access point is directly connected to an active Ethernet interface on an Aruba Mobility Controller, then no configuration is required. You may proceed to the next step. Connecting Cables & Power FE Port Specifications The 10/100 Mbps Ethernet (FE) port is located on the right-hand side of the Aruba 65 and has an RJ-45 female connector. The port pin-outs are shown in Figure 0-2: Aruba 41 10/100 Mbps Ethernet Select a location as close as possible to the center of the intended coverage area. The service location should be free from obstructions or obvious sources of interference. Normally, the higher you place an access point or air monitor, the better its performance. The Aruba 65 can be mounted on a wall using the mounting slots on the bottom of the unit. RJ-45 Female Pin-Out ETH Rx+ ETH Rx– ETH Tx+ Unused Unused ETH Tx– Unused Unused Direction Input Output 2 Installing the Aruba 65 (POE negative*) (POE negative*) (POE positive*) (POE positive*) *POE Figure 0-2: Aruba 65 FE Port Verifying Successful Installation The integrated LEDs on the AP 65 may be used at this point to verify the AP is receiving power and initializing successfully. LED behavior indicated status as follows: NOTE: For dimensions, see “Product Specifications”. Allow 5 cm (2”) additional space on the right-hand side for cables and ensure enough space for antenna articulation. ADP performs one key task: Obtain the IP address of the host Aruba Mobility Controller from which the Aruba access point will obtain its initial software load and configuration. NOTE: Aruba 65 Access Points are intended only for installation in Environment A as defined in IEEE 802.3.af, Power over Ethernet. All interconnected equipment must be contained within the same building, including the interconnected equipment’s associated LAN connections. LED Color(S) Activity Action Power/Test Green On Power On, Device Ready Flashing System Initializing LAN (10/100 Mbps) Green/Amber Off No Link Green On 100Mbps Link Negotiated Green Flashing 100Mbps Data Activity Using the Built-In Ceiling Tile Rail Mounting Slots The snap-in tile rail slots on the back of the Aruba 65 can be used to attach the device directlyto a 1” wide, standard ceiling tile rail. CAUTION: Do not use the mounting slots to hang the Aruba 65 from the ceiling, sideways, or in any place where it could fall on people or equipment. For more secure installation, use one of the optional mounting kits. To hang the Aruba 65 upright using the mounting slots, perform the following steps: WLAN Green/Amber Amber On 10Mbps Link Negotiated Amber Flashing 10Mbps Data Activity Off Wirless Radio Disabled Green On Wirleless Radio Enabled Green Flashing Wireless Data Activity ADP with Layer 3 Connected Access Points WLAN Planning — Determine how many Aruba access points will be needed for your wireless network deployment and where they will be installed. This can be easily accomplished using Aruba’s automated RF Plan site-survey software (available separately). This stage should have been completed during the master Aruba Mobility Controller installation and configuration. In, typical Aruba installations, the mobility controllers are configured and installed prior to access points. If your Aruba access point is NOT directly / Layer 2 connected to an Aruba Mobility Controller, and IP multicast routing is enabled on the host network, then ADP will multicast packets to locate a host Aruba Mobility Controller’s IP address. To ensure ADP is enabled, issue the following commands on the Master Aruba Mobility Controller: (A5000) (config) #adp discovery enable (A5000) (config) #adp igmp-join enable AP Provisioning — Provides each Aruba access point with the initial setting required to locate the host Aruba Mobility Controller. An IP helper address on the subnet’s default gateway, mapped to the host Aruba Mobility Controller’s IP address can be also used to facilitate the multicast / broadcast based aspect of this process. Once the Aruba access point is associated to its host Mobility Controller, device specific configuration may be applied as required (such as location code). AP Installation — Once provisioned, the AP can be physically installed at its intended place of operation. AP Configuration — The administrator defines the operational behavior for each Aruba access point such as RF characteristics and security features. For specific access point configuration information, refer to the ArubaOS User Guide. 1 Install two screws in the wall or shelf. If attaching the device to drywall, we recommend using appropriate wall anchors (not included). 2 Align the Aruba 65 mounting slots to capture the surface screws. 3 Configuring the Aruba 65 Once the Aruba 65 has been provisioned and installed, it will be capable of discovery and association to an Aruba Mobility Controller where the wireless and security parameters can be set. For AP configuration information, refer to the ArubaOS User Guide 3 Orient the antenna. For best performance, swivel the antenna so that it is oriented vertically. Provisioning using DNS If Layer 3 network connected, the Aruba 65 can use network based DNS to resolve a factory configured default host name “aruba-master” to derive the host Mobility Controller IP address. To enable this, a record for “aruba-master” must be created on the network DNS server. Figure 0-1: Aruba 65 Mounting Part 0500133 Device Dimensions (antenna stowed) (HxWxD) : • 100mm x 100mm x 37mm • 3.94” x 3.94” x 1.47” Data Rates: • 802.11a - 6, 9, 12, 18, 24, 36, 48 and 54 Mbps per channel • 802.11b - 1, 2, 5.5, 11 Mbps per channel • 802.11g - 6, 9, 12, 18, 24, 36, 48 and 54 Mbps per channel Device Dimensions (antenna extended 180 degree) (HxWxD) : • 167mm x 100mm x 37mm • 6.58” x 3.94” x 1.47” Output Transmit Power - 100 mW maximum (or lower as configured on the Aruba Mobility Controller to comply with local regulatory requirements) Shipping Dimensions (HxWxD) : • 100mm x 100mm x 37mm • 3.94” x 3.94” x 1.47” Miscellaneous Functionality Specifications Mechanical Maximum Clients - 128 Certifications Electromagnetic Compatibility • • • • • • • • • Radio Band Selection - via Mobility Controller in software Device Weight - TBD Shipping Weight - TBD Manageability: • Management of all 802.11 parameters • Network Wide AP Management via CLI, WEB GUI and SNMPv3 • Access Point Profiles, managed by Geographical Location, BSSID and Radio Type Temperature: • Operating: 0ºC to 50ºC (32ºF to 122ºF) • Storage: -10ºC to 70ºC (14ºF to 158ºF) Relative Humidity - 5% to 90% non-condensing Altitude - 8,000ft @ 28ºC (82.4ºF) Encryption (AP and Mobility Controller) - 40bit / 64bit / 128bit / 152bit WEP, TKIP, AES Mounting: • Wall, cube or ceiling mountable • Enclosure supports integrated rear mounted snap-in 1” ceiling tile rail guides Compliance FCC Antenna - Integrated, non-detachable articulating tri-band antenna Visual Status Indicators (LEDs): • PWR - Power / Status • ENET - Ethernet link status / Activity • WLAN G - WLAN 2.4GHz status / Activity • WLAN A - WLAN 5GHz status / Activity Electrical Ethernet: • 1 x 10/100 Base-T auto-sensing Ethernet RJ-45 Interface, MDI/MDX • IEEE 802.3af compliant Power Over Ethernet • IEEE 802.3, IEEE 802.3u • Power Over Ethernet, 48V DC / 220mA Wireless LAN Network Standards - IEEE 802.11a, IEEE 802.11a and IEEE 802.11g Antenna Type - Integral, 802.11a/b/g omni-directional high-gain antenna Antenna Gain: • 5.150GHz / 2.5dBi • 5.350GHz / 3.3dBi • 2.4 ~ 2.5GHz / 3.3dBi • VSWR 1.5:1 • Dual antenna - supports diversity Radio Technology: • Orthogonal Frequency Division Multiplexing (OFDM) • Direct Sequence Spread Spectrum (DSSS) Radio Modulation Type: • 802.11a - BPSK, QPSK,16-QAM, 64-QAM • 802.11b - CCK, BPSK, QPSK • 802.11g - CCK, BPSK, QPSK,16-QAM, 64-QAM Media Access Control - CSMA/CA with ACK Supported Frequency Bands 5GHz: • 5.150 ~ 5.250GHz (low band), country specific • 5.250 ~ 5.350GHz (mid band), country specific • 5.470 ~ 5.725GHz (Europe), country specific • 5.725 ~ 5.825GHz GHz (high band), country specific Supported Frequency Bands 2.4GHz: • 2.400 ~ 2.4835GHz (Global), channels country specific Operating Channels: 802.11b This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. • • • • IEC 60950 CB certificate and report FCC DOC Part 15 Class B (digital portion) FCC Part 15 Subpart C 15.247 FCC Part 15 Subpart E 15.407 ICES-003 Class B RSS 210 (Canada) VCCI Class B (Japan) Telec 2.4, Channel 14 and 5GHz approved (Japan) CE marked with NB letter of opinion for RTTE - ETS 300 328 2.4 GHz - ETS 301 893 5.4 GHz - ETS 301 489 EMC MIC Korea SRRC (China) AS/NZS 3548 Class B AS/NZS4771 (C-tick) The CE approval mark on back of the product indicates that it meets R&TTE Directive - EN 300 328, EN 301 489, EN 301 893 Safety IEC 60950 CB certificate and report cULus listed (AC Power Supply) PSE Mark (AC Power Supply) UL Listed (UL60950) UL Listed (Canadian Electrical Code/CSA 22.2 No. 60950) EN60950 / IEC60950 UL Listed (UL2043) Plenum Rating Disposal of the Aruba 65 When the useful life of the Access Point has expired, be sure to dispose of the unit in accordance with all local code and environmental regulations. Contact your local waste management or environmental agencies for details. Warranty Standard warranty - 90 Days return to manufacturer Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION STATEMENT: FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for indoor use only. This equipment should be installed and operated with a minimum distance of 15.2 inches (38.5 centimeters) between the radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. The FCC requires this product to be used indoors to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. Customer Support Main Site: www.arubanetworks.com Support: www.arubanetworks.com/support E-mail Sales: Support: sales@arubanetworks.com support@arubanetworks.com Telephone Numbers Main Fax Sales Support 408-227-4500 408-227-4550 408-754-1201 In the U.S.: 800-WI-FI-LAN (800-943-4526) International: 408-754-1200 Canada This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interferencecausing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of Communications. Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques,” NMB-003 édictée par le ministère des Communications. VCCI - Class B 802.11g 802.11a • US, Canada 11 • US, Canada 11 • US, Canada 12 • ETSI 13 • ETSI 13 • ETSI (up to 19) CE - Class B • Japan 13 • Japan 13 • Japan 4 Warning—This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Complete country list available at http://www.arubanetworks. com/products/aps/certification 132 2 EU - Class B This product complies with EN5022 Class B and EN5024 standards. crossman avenue tel 408 227 4500 sunny vale california 94089 fax 408 227 4550 w w w.arubanet works.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:3cc15484-2fb0-4a37-bb3e-34f96ca97842 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2005:09:14 17:13:35-07:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2005:10:14 13:58:18-07:00 Metadata Date : 2005:10:14 13:58:18-07:00 Document ID : uuid:d8960923-3ba4-460e-be7e-4e1ffdfadbc8 Format : application/pdf Title : 0500133 A65 IG.indd Creator : KJENSEN Author : KJENSENEXIF Metadata provided by EXIF.tools