Hewlett Packard Enterprise APINM210 IEEE 802.11 a/b/g/n 3x3 dual radio module User Manual APM210 RCSI rev4

Download:
Mirror Download [FCC.gov]
Document ID	2991390
Application ID	jrSeEi2gRp2N4ie81aj7qA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.52kB (494057 bits)
Date Submitted	2016-05-14 00:00:00
Date Available	2016-11-10 00:00:00
Creation Date	2016-04-25 15:22:58
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-04-25 15:22:58
Document Title	Microsoft Word - APM210_RCSI_rev4
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mhill

Aruba APM-210 Wireless Access Point Module
Regulatory Compliance and Safety Information User Guide
Introduction
This document contains domestic and international regulatory compliance and safety information for the access point
module. To ensure that this device complies with the regulatory standards for your region, please refer to the sections
below.



“Electrical and Environmental Specifications” on page 1
“Proper Disposal of Aruba Equipment” on page 1
“Safety and Regulatory Compliance” on page 2
Electrical and Environmental Specifications

Ethernet:

1x 10/100/1000 auto-sensing Ethernet RJ-45 Interface
MDI/MDX
IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)
Power over Ethernet (IEEE 802.3at and 802.3af compliant), 48V DC (nominal) and 56V DC
(maximum)/350mA (see
Power:
48 VDC power interface, supports powering through an AC-to-DC power adapter
POE support on Ethernet ports: 802.3at-compliant and 802.3af-compliant POE sourcing devices
Connect Only to IEC 60950-1 or IEC 60601-1 3rd edition products and power sources.
Environmental
o Operating: Temperature:
o 0° C to +50° C (+32° F to +122° F)
o Humidity: 5% to 95% non-condensing
o Storage and transportation:
o Temperature: -40° C to +70° C (-40° F to +158° F)
For additional specifications on this product, please refer to the data sheet. The data sheet can be found at
www.arubanetworks.com
Proper Disposal of Aruba Equipment
Dispose of Aruba products per local regulations. For the most current information about Global
Environmental Compliance and Aruba products, see our website at
www.arubanetworks.com.
Safety and Regulatory Compliance
Aruba Networks provides a multi-language document that contains country-specific restrictions and additional safety
and regulatory information for all Aruba access points. This document can be viewed or downloaded from the
following location: www.arubanetworks.com/safety_addendum
Regulatory Model Names
The following regulatory model names apply:
o APINM210
FCC
The host device label is required to state the following:
Contains FCC ID: Q9DAPINM210
Contains IC: 4675A-APINM210
The following Caution statement is required in the user manual:
FCC Class B Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instructions, may cause interference harmful to radio communications.
Operation is subject to the following conditions:
o This device may not cause harmful interference.
o This device must accept any interference received, including interference that may cause undesired operation
If this equipment does cause interference, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
Increase these parathion between the equipment and receiver.
o Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
o Consult the dealer or an experienced radio or TV technician for help.
Canada
Complies with the Class B limits for radio noise emissions as set out in the interference-causing equipment standard
entitled “Digital Apparatus,” ICES-003 of Industry Canada.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
For indoor use only. Operation in an outdoor host is prohibited.
This radio transmitter APINM210 has been approved by Industry Canada to operate with the antenna types listed below
with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types
not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for
use with this device.
The module as been approved with a Clip-On PCB Antenna. The Antenna is encased in a mold design specific for this
module.
The Maximum permissible antenna gain for 2.4GHz is 2.5dBi and 3.0dBi for 5GHz, and the antenna impedance is 50
ohms.
Users are advised that high power Radars are allocated as primary users of the bands 5250-5350 MHz and 5650- 5850
MHz and these Radars could cause interference and/or damage to Licensed Exempt WLAN devices.
Déclaration d’Industrie Canada
Cet appareil numerique de la classe B respecte toutes les exigencies du Reglement sur le materiel brouilleur du
Canada.
Ce périphérique est conforme aux règlements RSS exempts de licence d’Industrie Canada. L’utilisation de ce
périphérique est soumise aux deux conditions suivantes : (1) ce périphérique ne doit pas provoquer d’interférences, et
(2) ce périphérique doit accepter toute interférence, y compris les interférences susceptibles de provoquer un
dysfonctionnement.
Pour une utilisation en intérieur uniquement. Opération dans un hôte extérieur est interdite.
Cet émetteur APINM210 radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés
ci-dessous avec le gain maximal admissible et de l'impédance d'antenne requise pour chaque type d'antenne indiqué.
types d'antennes non inclus dans cette liste, ayant un gain supérieur au gain maximum indiqué pour ce type, sont
strictement interdits pour une utilisation avec cet appareil.
Le module été approuvé avec un clip-antenne PCB.
L'antenne est enfermé dans une conception de moule spécifique pour ce module.
Le gain d'antenne maximale admissible pour 2.4GHz est de 2,5 dBi et 3.0dBi pour 5GHz, et l'impédance de l'antenne
est de 50 ohms.
Les utilisateurs sont informés que les radars à haute puissance sont désignés comme utilisateurs principaux
des bandes 5250-5350MHz et 5650-5850MHz et ces radars pourraient provoquer des interférences et / ou
endommager les périphériques WLAN Exemptés sous licence .
EU Regulatory Conformance
Aruba Networks Inc., hereby declares that the 320 Series Wireless Access Points are in compliance with directives
listed below:
o EMC Directive: 2014/30/EU
o Low Voltage Directive: 2014/35/EU
o R&TTE Directive: 1999/5/EC
o REACH Regulation (EC): 1907/2006
o RoHS Directive: 2011/65/EU
o WEEE Directive: 2012/19/EU
A Declaration of Conformity for these directives is available for viewing at www.arubanetworks.com.
Users are advised that high power Radars are allocated as primary users of the bands 5250-5350 MHz and 5650- 5850
MHz and these Radars could cause interference and/or damage to Licensed Exempt WLAN devices.
Medical
1.
2.
3.
4.
5.
Equipment not suitable for use in the presence of flammable mixtures.
Connect to only IEC 60950-1 or IEC 60601-1 3rd edition certified products and power sources. The end user
is responsible for the resulting medical system complies with the requirements of IEC 60601-1 3rd edition.
Wipe with a dry cloth, no additional maintenance required.
No serviceable parts, the unit must be sent back to the manufacturer for repair.
No modifications are allowed without Aruba approval.
第十二條
經型式認證合格之低功率射頻電機 , 非經許可,公司 、商號或使用者均不得擅自變更頻率 、加大功或
變更原設計之特性 及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信 ; 經發現有
干擾現象時 , 應立即停用,並改善至無干擾時方得繼 續使用 。
前項合法通信 , 指依電信法規定作業之無線電通信 。
低功率射頻電機須忍受合法通信或工業 、科學及醫療用電波輻射性電 機設備之干擾 。

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mhill
Create Date                     : 2016:04:25 15:22:58-07:00
Modify Date                     : 2016:04:25 15:22:58-07:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - APM210_RCSI_rev4
Creator                         : mhill
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:a2e026f5-cae5-4847-9093-54dc253b8ea8
Instance ID                     : uuid:771af1ba-61bd-4adf-a999-36ef09e3c723
Page Count                      : 5

EXIF Metadata provided by EXIF.tools