Hewlett Packard Enterprise MSR4000 Aruba Networks MSR4000 Access Point User Manual Professional Installation Instruction

Aruba Networks, Inc. Aruba Networks MSR4000 Access Point Professional Installation Instruction

Contents

Professional Installation Instruction

Download: Hewlett Packard Enterprise MSR4000 Aruba Networks MSR4000 Access Point User Manual Professional Installation Instruction
Mirror Download [FCC.gov]Hewlett Packard Enterprise MSR4000 Aruba Networks MSR4000 Access Point User Manual Professional Installation Instruction
Document ID1446569
Application IDjxQBiEfw9O1KdBRcBI7AfA==
Document DescriptionProfessional Installation Instruction
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.94kB (86762 bits)
Date Submitted2011-04-11 00:00:00
Date Available2011-04-12 00:00:00
Creation Date2017-11-05 23:59:28
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-11-05 23:59:28
Document TitleMicrosoft Word - MSR-4000_ProfInstall-Instruction.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: itankov

Professional installation Guide
Product/s covered in this guide:
Model: MSR4K43N0-XX is part of the Aruba’s MSR4000 family, implementing quad radio cards
each 2x2 MIMO supporting IEEE 802.11 a/b/g/n/j operation.
IMPORTANAT - Visit Aruba Support web page for the latest information and documentation related
to this product.
IMPORTANAT – Please read this document before installing and using your product.
This device must be installed and used in strict accordance with the manufacturer's instructions. Only
approved by the manufacturer power adapters must be used. For replacement, contact your supplier or
distributor.
Installation of this product must comply with local regulations and codes. When this product is used
with external antenna/s, please refer to the installation documentation provided for the antenna/s.
Changes or modifications to the device not approved by the manufacturer of the product could void
the user’s authority to operate the equipment and will void the warranty of the product. No user
serviceable parts; all repairs and service must be handled by a qualified service center.
All products using external antennas must be professionally installed, and the transmit power of the
system must be adjusted by the professional installer/s to ensure that the system’s EIRP is in
compliance with the limit specified by the regulatory authority of the country of deployment.
During deployment of the system and its initial setup, professional installer must ensure that the
allowed EIRP limit is not exceeded (in the Country of exploitation of this equipment). To achieve this
professional installer must use approved and recommended by the Manufacturer antennas,
1. ANT-2x2-2714
2.4G,14DB,70DEG SECTR,2x2,N-TYPE
2. ANT-2x2-5614U 5.5G-5.8G,14DB,60DEG SECTR,2x2,N-TYPE
3. AP-ANT-80D
2.4GHz Outdoor 8dBi Omni Antenna
4. AP-ANT-86
4.9G-5.9G Outdoor 10dBi Omni Antenna
and enter Antenna gain in the software using to setup and mange the product. In additional attenuation
between the device and antenna may have to be measured or calculated.
The following formula can be used to calculate from EIRP limit related RF power based on selected
antennas (antenna gain) and feeder (Coaxial Cable loss):
EIRP = Tx RF Power (dBm) +GA (dB) - FL (dB);
EIRP –> limit specific for each Country of deployment
Tx RF Power –> RF power measured at RF connector of the unit
GA –> Antenna gain
FL -> Feeder loss (including the connectors’ loss)
Antenna Types and Maximum Antenna Gains
Frequency Band
Type
Dipole/Omni
2.4 GHz
Directional
5 GHz
Dipole/Omni
Directional
Gain (dBi)
14
11
14
Note: Antenna information provided above reflect approved antennas for initial release of the
device. For full list of antennas approved/recommended by the Manufacture please visit the
Aruba Networks Inc. web site.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : itankov
Create Date                     : 2011:03:24 17:42:17-07:00
Modify Date                     : 2011:03:24 17:44:51-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:03:24 17:44:51-07:00
Format                          : application/pdf
Title                           : Microsoft Word - MSR-4000_ProfInstall-Instruction.docx
Creator                         : itankov
Producer                        : Acrobat Distiller 9.4.2 (Windows)
Document ID                     : uuid:afcfb9a3-f26b-4f89-977e-5e1a0daded33
Instance ID                     : uuid:558bee4f-8816-4f64-ab73-ecfa0c0254ab
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q9DMSR4000

Navigation menu