Hewlett Packard Enterprise SL3050 11a/b/g Wireless PC Card with XJACK Antenna User Manual Manual 960810

Hewlett-Packard Company 11a/b/g Wireless PC Card with XJACK Antenna Manual 960810

Contents

Users Manual

Download: Hewlett Packard Enterprise SL3050 11a/b/g Wireless PC Card with XJACK Antenna User Manual Manual   960810
Mirror Download [FCC.gov]Hewlett Packard Enterprise SL3050 11a/b/g Wireless PC Card with XJACK Antenna User Manual Manual   960810
Document ID828483
Application IDBJ8nQ1ddS0FGOFCiXcuPjw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.75kB (96844 bits)
Date Submitted2007-08-13 00:00:00
Date Available2007-08-13 00:00:00
Creation Date2007-08-13 15:05:24
Producing SoftwarepdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document Lastmod2007-08-13 17:55:31
Document TitleManual --960810.doc
Document CreatorpdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author: lydia

Getting Started Guide
®
11a/b/g Wireless PC Card with XJAXK Antenna
Model Number : SL-3050
3C Number : 3CRPAG175B
Installation Steps
This PC Card operates with Windows XP and Windows 2000.
1. With the computer on and Windows running, insert the Installation CD into the CD-ROM drive. The
auto-start feature starts the installation. If nothing happens within five seconds, click Start > Run
and type d:\setup.exe (where d: is your CD-ROM drive).
2. Your computer goes through a brief installation process during which it displays several windows
indicating what is currently installing.
Respond to the prompts as they appear.
If a Windows errror message displays, select the option to continue the installation.
You may receive prompts for the Windows installation CD. Insert the CD for your Windows
operating system and indicate the correct path.
3. When prompted, insert your PC Card as shown below.
4.
Activate the PC Card’s antenna by pressing and releasing it so that it extends out from the Card.
US-Radio Frequency Requirements:
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
This device is for indoor use only when using channels 36,40,44 or 48 in the 5.15 to 5.25 GHz frequency range
High power radars are allocated as primary users of the 5.15 to 5.35 GHz, 5.47 to 5.725GHz and 5.725 to
5.85GHz bands. These radar stations can cause interference with and/or damage this device.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. To maintain compliance with FCC RF exposure compliance
requirements, please follow operation instruction as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
SAR compliance has been established in typical laptop computer(s) with CardBus slot, and product
could be used in typical laptop computer with CardBus slot. Other application like handheld PC or
similar device has not been verified and may not compliance with related RF exposure rule and such
use shall be prohibited.
The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destination. The
firmware setting is not accessible by the end user.
Manufacturer’s Declaration of Conformity
3Com Corporation, Corporate Headquarters, 350 Campus Drive, Marlborough, MA 01752-3064, USA
Declares that the Product:
Date: July, 2005
Brand Name: 3Com Corporation
Model Number: SL-3050
3C Number: 3CRPAG175B
®
Equipment Type: 11a/b/g Wireless PC Card with XJAXK Antenna
Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired
operation.
FCC ID: O9C-SL305
IC: 2299A-SL3050
Industry Canada Notice (Applicable for use within Canada)
This Device complies with Canadian RSS-210.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit
RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s website www.hc-sc.gc.ca/rpb.
Industry Canada (IC) Emissions Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two
conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of the
device
Caution:
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to
co-channel mobile satellite systems.
Because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and
5650-5850 MHz, these radars could cause interference and/or damage to license exempt LAN devices.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance
with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual.
Safety Notice
This device has been tested and certified according to the following safety standards and is intended for use only
in Information Technology Equipment which has been tested to these or other equivalent standards:
UL Standard 60950 (3rd Edition)/ CSA C22.2 No. 60950
IEC 60950
EN 60950
European Community CE Notice
Marking by the symbol
indicates compliance with the essential requirements of Directive 73/23/EC and the essential requirements of
articles 3.1(b), 3.2 and 3.3 of Directive 1999/5/EC. Such marking is indicative that this equipment meets or
exceeds the following technical standards:
EN 300 328-2 — Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; data transmission equipment operating in the 2,4GHz ISM band and using spread
spectrum modulation techniques
ETN 301 489-17: V.1.1.1 (09-2000) — Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific
conditions for Wideband data and HIPERLAN equipment
EN 60950 — Safety of information technology equipment, including electrical business equipment.
Due to frequency restrictions, it is necessary to select your country before using this radio device.
3Com 11a/b/g Wireless PC Card with XJAXK® Antenna
Model Number : SL-3050
3C Number : 3CRPAG175B
Published August 2005

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2007:08:13 15:05:24+08:00
Creator Tool                    : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Modify Date                     : 2007:08:13 17:55:31+08:00
Metadata Date                   : 2007:08:13 17:55:31+08:00
Format                          : application/pdf
Creator                         : lydia
Title                           : Manual --960810.doc
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:51d90b19-e9f7-490a-8e00-563a94c14e76
Instance ID                     : uuid:bbfc5d77-1867-4aa4-aef7-90793905dc5a
Page Count                      : 5
Author                          : lydia
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O9C-SL3050

Navigation menu