Hi Link Electronic HLK-M30 WIFI module User Manual HLK M30 DataSheet

Download:
Mirror Download [FCC.gov]
Document ID	2521873
Application ID	OoEeQfDVUxHwgUfCyQGOBg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.59kB (269885 bits)
Date Submitted	2015-02-03 00:00:00
Date Available	2015-02-03 00:00:00
Creation Date	2017-10-19 01:17:17
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-19 01:17:17
Document Title	Microsoft Word - HLK-M30 DataSheet.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

HLK-M30 Data Sheet
HLK-M30-DS V1.0 7/30/2014
Overview:
HLK-M30 is a new low-cost embedded UART-WIFI module
(serial port -Wireless) developed by Shenzhen HaiLingKe
Electronic co., Ltd.
This product is an embedded module based on the universal
serial interface network standard,built-in TCP / IP protocol stack,
enabling the user serial port,wireless network (wifi) interface
between the onversions.Through the HLK-M30 module, the
traditional serial devices do not need to change any
configuration,userdata can be transmitted through the Internet
network. Provide a quick solution for the user’s serial devices to
transfer data via WIFI
Module Block Diagram
Features:
• 2.4GHz 802.11b/g/n,compatible
• WiFi Sta/Soft AP Mode
• Support Smart Connection
• The range of baudrate: 1200~115200bps
• Support transparent transmission mode
• Support multiple security authenti-cation
mechanisms:
WEP64/WEP128/ TKIP/ AES
WEP/WPA-PSK/WPA2-PSK
• Support wireless roam
• Support multiple network protocols:
TCP/UDP/ /DHCP/DNS
Benefits
Applications
• Low Power consumption
• WiFi Led Control
• Support AT instruction Set
• Ready to use in products
• WiFi Power Switch
• Device Dimensions 16.3mm*14mm*
• Minimizes product development
• Smart Home;Smart Buliding
• No RF test required for systems
• OBDII WiFi Diagnose
• Serial to Wifi; Smart;Small;
• RFID Data Transfer
• Support Smart Connection
• Toys and Gaming Peripherals
• Transparent Transmission
• Industrial Systems
• Serial to Wifi; Smart;Small;
• Telemetry
• Compliant with CE and FCC
• Remote Control
2.24mm
Lead-free and RoHS compliant
HLK-M30 Data Sheet
HLK-M30-DS V1.0 7/30/2014
1. Introduction
The HLK-M30 module provides designers with a ready made component that provides a fully integrated solution for
applications, using the IEEE802.11 standard in the 2.4-2.5GHz ISM frequency band, including802.11b/g/n, can be quickly
and easily included in product designs. The modules integrate all of the RF components required, removing the need to
perform expensive RF design and test. Products can be designed by simply connecting sensors and switches to the
module IO pins or uart interface. The modules use MTK’s chip Wireless Microcontroller, allowing designers to make use of
the serial interface to connect with their device. Hence, this module allows designers to bring wireless applications to
market in the minimum time with significantly reduced development effort and cost.
The HLK-M30 is an embedded module based on the universal serial interface network standard,built-in TCP / IP
protocol stack, enabling the user serial port, wireless network (wifi) interface between the conversions. Through the
HLK-M30 module, the traditional serial devices do not need to change any configuration; data can be transmitted through
the Internet network. Provide a quick solution for the user’s serial devices to transfer data via Ethernet Also the HLK-M30
module have FCC modular approvals and is compliant with EU regulations.
2. Specifications
The parameters are defined here.
VDD=3.3V @ +25°C
Typical DC Characteristics
Notes
RX Active, HT40, MCS7
150mA
802.11.n
TX HT40, MCS7 @15dBm
210mA
802.11.n
Typical RF Characteristics
Notes
Receive sensitivity
-70dBm(802.11n)
Use IQview to adjust
Maximum Transmit power
18dBm/15dBm/13.5dBm
802.11b/g/n
RF Port impedance – Ipex onnector
50 ohm
2.4 - 2.5GHz
VSWR (max)
2:1
2.4 - 2.5GHz
Centre frequency accuracy
+/-25ppm
Additional +/-15ppm allowance
Peripherals
Notes
UART
2pins
1200-115200kbps
GPIO
5pins
GPIO
VCC
2pins
3.3V+/-10% Two VCC should all connect to power
AN
4pins
Analog
GND
23pins
GND
HLK-M30 Data Sheet
HLK-M30-DS V1.0 7/30/2014
3. Product Development
HaiLingKe supplies all the development tools needed to enable end-product development to occur quickly and efficiently.
These are all available from www.hlktech.com. A evaluation kits is also available, allowing products to be quickly bread
boarded. Efficient development of software applications is enabled by the provision of a complete, unlimited, software
developer kit.This package provides everything required to develop application code and to trial it with hardware
representative of the final module.
34
33
32
31
30
29
28
GND
GND
RST
RX
TX
LED
ES/RST
GPIO2
4. Pin Layout
27
GPIO1
26
GND
GPIO0
25
GND
GND
24
GND
GND
23
GND
GND
22
GND
GND
21
GND
VDD2
20
GND
GND
19
VDD1
ANT
18
AN4
16
17
AN3
15
AN2
14
AN1
13
GND
12
GND
11
GND
GND
10
36
38
GND
35
37
Note:VDD1 and VDD2 should all connect to 3.3V. Pin 35/36/37/38 is GND.
4.1. Pin Description
Signal Type
Description
GPIO1
General GPIO
GPIO0
General GPIO
Pin No
HLK-M30 Data Sheet
HLK-M30-DS V1.0 7/30/2014
GND
Analogue Ground
GND
Analogue Ground
GND
Analogue Ground
GND
Analogue Ground
VDD2
Supply Voltage, 3.3V+/-10%
GND
Analogue Ground
ANT
Antenna Pin
10
GND
Analogue Ground
11
GND
Analogue Ground
12
GND
Analogue Ground
13
GND
Analogue Ground
14
GND
Analogue Ground
15
AN1
Analogue Pin(Reserved)
16
AN2
Analogue Pin(Reserved)
17
AN3
Analogue Pin(Reserved)
18
AN4
Analogue Pin(Reserved)
19
VDD1
Supply Voltage, 3.3V+/-10%
20
GND
Analogue Ground
21
GND
Analogue Ground
22
GND
Analogue Ground
23
GND
Analogue Ground
24
GND
Analogue Ground
25
GND
Analogue Ground
26
GND
Analogue Ground
27
GND
Analogue Ground
28
GND
Analogue Ground
29
RST_N
Reset Module
30
RX
UART RX
31
TX
UART TX
32
LED
Staus LED
33
ES/RST
Exit/Default/Update
34
GPIO2
General GPIO
35
GND
Analogue Ground
36
GND
Analogue Ground
37
GND
Analogue Ground
38
GND
Analogue Ground
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance.
Note 1: This module certified that complies with RF exposure requirement under portable or mobile or fixed
condition, this module is to be installed only in portable or mobile or fixed applications.
A portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the
device is/are within 20 centimeters of the body of the user
A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to
generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained
between the transmitter's radiating structure(s) and the body of the user or nearby persons. Transmitting devices
designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated
with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation
requirement.
A fixed device is defined as a device is physically secured at one location and is not able to be easily moved to
another location.
Note 2: Any modifications made to the module will void the Grant of Certification, this module is limited to OEM
installation only and must not be sold to end-users, end-user has no manual instructions to remove or install the
device, only software or operating procedure shall be placed in the end-user operating manual of final products.
Note 3: The device must not transmit simultaneously with any other antenna or transmitter.
Note 4: To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring
compliance with the module(s) installed and fully operational. For example, if a host was previously authorized as
an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module
and a module is added, the host manufacturer is responsible for ensuring that the after the module is installed and
operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this
may depend on the details of how the module is integrated with the host, Shenzhen HaiLingKe Electronic co., Ltd
shall provide guidance to the host manufacturer for compliance with the Part 15B requirements.
Note 5: FCC ID label on the final system must be labeled with “Contains FCC ID: 2AD56HLK-M30” or
“Contains transmitter module FCC ID: 2AD56HLK-M30”.
The transmitter module must be installed and used in strict accordance with the manufacturer's instructions as
described in the user documentation that comes with the host product. Shenzhen HaiLingKe Electronic co., Ltd is
responsible for the compliance of the module in all final hosts.
HLK-M30 Data Sheet
HLK-M30-DS V1.0 7/30/2014
5.Package Information(QFN Packaging)
Unit:mm
5.1.Ordering Information
Part number
Package
Operate Temp
HLK-M30
14.1*16.5mm QFN38
-20~70°C

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
Author                          : Administrator
Create Date                     : 2014:08:10 13:46:12+08:00
Modify Date                     : 2014:10:07 12:05:42+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - HLK-M30 DataSheet.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:10:07 12:05:42+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:f31610c4-664b-47b7-bdd7-c6e59ff67af4
Instance ID                     : uuid:495a475a-0b3c-413d-8f99-613b4c833b74
Page Count                      : 7

EXIF Metadata provided by EXIF.tools