Hideki Electronics TS906 Wireless Rain Gauge User Manual Instruction Manual of TS906

Download:
Mirror Download [FCC.gov]
Document ID	648603
Application ID	Hp0MhyWHFZ0pYwkBgDibVQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.95kB (86867 bits)
Date Submitted	2006-04-19 00:00:00
Date Available	2006-04-19 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	GNU Ghostscript 7.06
Document Lastmod	2006-04-06 12:36:33
Document Title	Microsoft Word - Instruction Manual of TS906.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ben

Instruction Manual of TS906(Draft Copy)
Remote Rain Gauge:
Setting up the Rain Gauge
1.
Unlock the funnel-shaped top of the rain sensor by turning both knobs on the sides of the rain
sensor in an anti-clockwise direction.
2.
Lift the top off the base and insert two 2 x UM-3 or “AA” size 1.5V batteries into the battery
holder.
3.
Replace the lid and secure into place by turning the knobs clockwise.
4.
Place the rain sensor in a location such that precipitation can fall directly into the sensor, ideally
2-3 ft above the ground.
It may be secured into place by using the four screws provided.
5.
The sensor must be accurately level for optimum performance. To check if the sensor is level,
remove the lid and check if the ball bearing inside is at the midpoint of the leveler. Additionally, a
bubble level or carpenter’s level may be used.
6.
Attach the protective screen onto the top of the lid. The screen will prevent any debris entering the
sensor.
Placement tips:
The rain sensor should be placed in an open area away from walls, fences, trees and other
coverings which may either reduce the amount of rainfall into the sensor, deflect the entry of
wind-blown rain, or create extra precipitation runoff. Trees and rooftops may also be sources of
pollen and debris.
To avoid rain shadow effects, place the sensor at a horizontal distance corresponding to two to four
times the height of any nearby obstruction.
-
It is important that rain excess can flow freely away from the sensor. Make sure that water does not
collect at the base of the unit.
The rainfall measurement mechanism utilizes a magnet, hence do not place any magnetic objects
around the proximity of the sensor.
Product Specification:
Power
Remote Rain gauge unit
: use 2 pcs UM-3 or “AA” 1.5V battery
Dimension
Remote Rain gauge unit
: 163(L) x 177(H) x 119(D) mm
Operating Temperature (Remote rain gauge)
: -5°C to 50°C (23°F to 122°F)
Storage Temperature
: -20°C to 70°C (-4°F to 158°F)
Receiving Cycle of Rain gauge
: 183s
Rain Accuracy
: +/- (0.8mm + 5%)
Rain Resolution
: 0.8mm
1h/24h/yesterday Rainfall Range
: 0.0 to 1999.9 mm (78.73 inch)
Last week/ last month Rainfall Range
: 0 to 19999 mm (787.3 inch)
FCC STATMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user'
s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DECLARATIOIN OF CONFORMITY
We
Name: Hideki Electronics, Inc.
Address: 7865 SW Mohawk, Tualatin, OR 97062
Telephone No.: 1-503-612-8395
declare that the product
Product No.: TC150
Product Name:
Manufacturer: Hideki Electronics Ltd.
Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New
Territories, Hong Kong
is in conformity with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
The information above is not to be used as contact for support or sales. Please call
our customer service hotline (refer to the Standard Warranty Information) for all
inquiries instead.
STANDARD WARRANTY INFORMATION
This product is warranted from manufacturing defects for one year from date of retail
purchase. It does not cover damages or wear resulting from accident, misuse, abuse,
commercial use, or unauthorized adjustment and repair.
Note that online product registration is required to ensure valid warranty protection.
To register your product, go to our Company website at:
www.honeywellweatherstations.com. Click Online Product Registration under the
Customer Service menu. Should you require assistance with this product and its
operation, please contact our Customer Service Hotline 1(866) 443 3543
Please direct all returns to the place of the original purchase. Should this not be possible,
contact Customer Service Hotline for assistance and to obtain a Return Merchandise
Authorization (RMA). Returns without a return authorization will be refused. Please
retain your original receipt as you may be asked to provide a copy for proof of purchase.
Hideki Electronics, Inc. reserves the right to repair or replace the product at our option.
Copyright (2005) Hideki Electronics Inc. All Rights Reserved. The Honeywell
Trademark is used under license from Honeywell Intellectual Properties Inc. Honeywell
International Inc. makes no representations or warranties with respect to this product. All
user manual contents and information are subject to change.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 1/5/2006 11:59:17
Producer                        : GNU Ghostscript 7.06
Format                          : application/pdf
Creator                         : ben
Title                           : Microsoft Word - Instruction Manual of TS906.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:04:06 12:36:33+08:00
Metadata Date                   : 2006:04:06 12:36:33+08:00
Document ID                     : uuid:4b447169-b382-4398-8a2a-60fade6b7a18
Instance ID                     : uuid:dd9e14a1-1b5c-49b8-90bf-ed8b98187a3b
Page Count                      : 5
Create Date                     : 1/5/2006 11:59:17
Author                          : ben

EXIF Metadata provided by EXIF.tools