High Flying Electronics Technology HF-Z100 Zigbee Module User Manual Manual

High-Flying Electronics Technology Co., Ltd. Zigbee Module Manual

Contents

Manual

HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -1-HF-Z100 ZigBee Module User ManualV1.2TABLE OF CONTENTSLIST OF FIGURES.................................................................................................................................................2LIST OF TABLES................................................................................................................................................... 2HISTORY.................................................................................................................................................................21. PRODUCT OVERVIEW............................................................................................................................31.1. General Description............................................................................................................................... 31.2. Device Features......................................................................................................................................31.3. Device Paremeters.................................................................................................................................41.4. Key Application.......................................................................................................................................42. HARDWARE INTRODUCTION.............................................................................................................. 52.1. Pins Definition.........................................................................................................................................52.2. Electrical Characteristics.......................................................................................................................62.3. Mechanical Size......................................................................................................................................62.4. Antenna....................................................................................................................................................72.5. Evaluation Kit.......................................................................................................................................... 92.6. Order Information.................................................................................................................................102.7. Typical Application...............................................................................................................................103. PACKAGE INFORMATION................................................................................................................... 113.1. Recommended Reflow Profile............................................................................................................113.2. Device Handling Instruction (Module IC SMT Preparation).......................................................... 113.3. Shipping Information............................................................................................................................11APPENDIX A: HW REFERENCE DESIGN............................................................................................... 13APPENDIX B: CONTACT INFORMATION................................................................................................14
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -2-LIST OF FIGURESFigure 1. HF-Z100 Overview............................................................................................................................. 5Figure 2. HF-Z100 Pins Map............................................................................................................................. 5Figure 3. HF-Z100 Mechanical Dimension......................................................................................................7Figure 4. HF-Z100 Suggested Wire Antenna Position.................................................................................. 8Figure 5. HF-Z100 through hole PAD Position............................................................................................... 8Figure 6. HF-Z100 with Chip Antenna Suggested Placement..................................................................... 8Figure 7. HF-Z100 Evaluation Kit..................................................................................................................... 9Figure 8. HF-Z100 Order Information............................................................................................................ 10Figure 9. HF-Z100 Hardware Typical Application........................................................................................10Figure 10. Reflow Soldering Profile..............................................................................................................11Figure 11. Shipping Information....................................................................................................................12LIST OF TABLESTable 1. HF-Z100 Module Technical Specifications........................................................................................ 4Table 2. HF-Z100 Pins Definition........................................................................................................................5Table 3. Operation Parameters...........................................................................................................................6Table 4. RF Parameters....................................................................................................................................... 6Table 5 HF-Z100 Evaluation Kit Interface Description................................................................................... 9Table 6. Reflow Soldering Parameter.............................................................................................................. 11HISTORYEd.V1.0 04-10-2014 First Version.Ed.V1.1 05-18-2014 Update Antenna Option and add EVK information.
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -3-1. PRODUCT OVERVIEW1.1. General DescriptionThe HF-Z100 is a fully self-contained, small form-factor, IEEE802.15.4 Zigbee modulewith lowcomplexity, self-organizing, lowpower, low cost feature.It is based on IEEE802.15.4 standard, can becoordinated toachieve communication between the thousands of tiny sensors that require verylittleenergy to relay the data through radio waves from one sensor to another sensor, thus withhighcommunication efficiency.The HF-Z100 employs the world's lowest power consumption embedded architecture. It has beenoptimized for all kinds of Zigbee applications in the home automation, smart grid, smart lighting,handheld device, personal medical application and industrial control that have lower data rates, andtransmit or receive data on an infrequent basis.The HF-Z100 integrates all IEEE802.15.4 Zigbee functionality into a low-profile,15.6x12.2x2.0mmSMTmodule package that can be easily mounted on main PCB with application specific circuits. Also,module provides built-in antenna, external antenna option.1.2. Device FeaturesSize: 15.6x12.2x2.0mm Smallest size module;High RX sensitivity: ≤-101dBm;Excellent link budget: > 110dB;Max output power: 9dBM +/- 1.5dBm;Extend OperationTemprture: -40℃-110℃for smart lighting application;Low power consumption:Operating Current: < 150mADeep Sleep Current: <10uA512KB Internal Flash, 160KB SRAM resource for customized application;Full Zigbee ZHA/ZLL profile supported;Various peripherals interface:15 x GPIO ports3 x 16-bit ADC input channel2 x UART with hardware flow control1 x SPI interface1 x I2C interfaceSWD debug interfacePower Supply Range from 2V to 3.6V, support battery supply application;High performance on-board antenna and PAD/HOLE for external antenna option;CE/FCC/RoHS certification;
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -4-1.3. Device ParemetersTable 1. HF-Z100 Module Technical SpecificationsClass Item ParametersWirelessParametersCertification FCC/CEWireless Standard 802.15.4Radio Data Rate 250Kbps@2.4GHzFrequency Range 2.4~2.4835GHzTransmit Power 9 +/-1.5dBmReceiverSensitivity ≤-101dBmAntenna OptionExternal:PAD or Through Hole for external ANTInternal:On-board Chip ANTHardwareParametersData Interface UART,ADC,DACSPI,I2C,GPIOOperating Voltage 2.0~3.6VOperating Current ＜80mADeep Sleep Current ＜10uACommunicationDistance Indoor 30m,Outdoor 100mOperating Temp. -40℃-110℃StorageTemp. -45℃-125℃Dimensions and Size 15.6x12.2x2.0mm1.4. Key ApplicationIllumination controlHVAC monitoring and controlBuilding automationAccess ControlSecurity systemIndustrial automationAutomated meteringSmart energy
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -5-2. HARDWARE INTRODUCTIONFigure 1. HF-Z100 Overview2.1. Pins DefinitionFigure 2. HF-Z100 Pins MapTable 2. HF-Z100 Pins DefinitionPin Net Name Describtion1~2 GND Ground3 GPIO12 PWM output-1 (Timerl)4 GPIO13 PWM output-2 (Timerl)5GPIO14 SWDClock6 GPIO15 SWD Data7 GPIO16 IIC SDA8VIO IO Power (2.0~3.6V)
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -6-Pin Net Name Describtion9GPIO17 IICCLK10 GPIO18 PWM output-3 (Timerl)11~13 GND Ground14 GPIO21 UART2_TXD15 GPIO22 UART2_RXD16 GPIO23 PWM output-4 (Timerl)17 GND Ground18 VBAT Main Power (2.0~3.6V)19 GND Ground20 GPIO29 Reserve21 GPIO28 Enable22 GND Ground23 RESET_N The reset signal24 GPIO4 ADCx3 or ADCx1And Wakeup INTx225 GPIO526 GPIO627 GND Ground2.2. Electrical CharacteristicsTable 3. Operation ParametersParameter Condition Min. Typ. Max. UnitOperating Supply voltage 2.0 3.3 3.6 VRX Current Active CPU 32MHz 21 mATX Current Active CPU 32MHz, +9dBm 34 mADeep Sleep Current 10 uATable 4. RF ParametersParameter Ratings UnitOperating Frequency 2.4~2.4835 GHzIF Frequency 4 MHzQuantity of Channel 16Number of Channeels 11~26Max TX Power 9 dBmRX Seneitivity ~104 dBMData Rate 250 KBS2.3. Mechanical SizeHF-Z100 modules detailed mechanical data is referred to as following Figure(Unit is Mil).The pad size:25mil X 45mil, pin pitch is 40mil.
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -7-Figure 3. HF-Z100 Mechanical Dimension2.4. AntennaHF-Z100 module support internal on-board chip antenna and external wire antennaoption.Wire antenna is flexible to avoid the metal affect or the other on RF performance inLED lighting because it isnot fixed on board like chip antenna and can be go out externally.The position for the assembly of wireantenna on board referto Figure 4, user can selecthorizontal direction through the SMT PAD or vertical direction through the Through Hole PADbased on dedicated application.When customer select internal antenna, you shall comply with following antenna design rulesand module location suggestions:For user PCB, RED color region (6x5mm) can’t put componet or paste GND net;Antenna must away from metal or high components at least 10mm;Antenna can’t be shieldedby any meal enclosure. All cover, include plastic, shall awayfrom antenna at least 10mm;High-Flying suggest HF-Z100 module better locate in following region at customer board asFigure 5, which to reduce the effect to antenna and wireless signal, and better consult High-Flying technical people when you structure your module placement and PCB layout.
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -8-Figure 4. HF-Z100 Suggested Wire Antenna PositionFigure 5. HF-Z100 through hole PAD PositionThe through hole PAD Position:X: 95mil;Y:91.5mil;Dia.:35.43milFigure 6. HF-Z100 with Chip Antenna Suggested Placement
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -9-2.5. Evaluation KitHigh-Flying provides the evaluation kit to promote user to familiar the product and develop the detailedapplication. The evaluation kit shown as below, user can connect to HF-Z100 module with the UART(USB), or SWD Debugger port to configure the parameters, manage the module or do the somefunctional tests.Figure 7. HF-Z100 Evaluation KitNotes: User need consult high-flying for software SDK support or more detailed debug support.The external interface description for evaluation kit as follows:Table 5 HF-Z100 Evaluation Kit Interface DescriptionFunction Name DescriptionExternalInterfaceJTAG JTAG data debug interface (Not for user use)USB UART to USB debug interface. (For PC withoutRS232, need load driver). Can be Power input.DC Jack DC jack for power in, 5~9V input.DC5-9V DC jack for power in, 5~9V input.BAT 2 Li-Battery Power Supply.EXT PORT HF-Z100 GPIO function extend interface connectorLED Power 3.3V Power IndicatorTXD UART TXD IndicatorRXD UART TXD IndicatorButton nReset Used to reset the module.
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -10-2.6. Order InformationBase on customer detailed requirement, HF-Z100 series modules provide different variants andphysical type for detailed application.Figure 8. HF-Z100 Order Information2.7. Typical ApplicationThe module basic reference schematic is referred to following,Figure 9. HF-Z100 Hardware Typical ApplicationNotes: If HF-Z100 GPIO6 (RXD) and GPIO4 (TXD) are not used for ADC and Wakeup function,suggestusing them as the default UART download port.
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -11-3. PACKAGE INFORMATION3.1. Recommended Reflow ProfileFigure 10. Reflow Soldering ProfileTable 6. Reflow Soldering ParameterNote: 1. Recommend to supply N2 for reflow oven.2. N2 atmosphere during reflow (O2<300ppm)3.2. Device Handling Instruction (Module IC SMT Preparation)1. Shelf life in sealed bag: 12 months, at <30℃and <60% relative humidity (RH)2. After bag is opened, devices that will be re-baked required after last baked with window time168 hours.3. Recommend to oven bake with N2 supplied4. Recommend end to reflow oven with N2 supplied5. Baked required with 24 hours at 125+-5℃before rework process for two modules, one isnew module and two is board with module6. Recommend to store at ≦10% RH with vacuum packing7. If SMT process needs twice reflow:(1) Top side SMT and reflow 　(2) Bottom side SMT and reflowCase 1: Wifi module mounted on top side. Need to bake when bottom side process over 168hours window time, no need to bake within 168 hoursCase 2: Wifi module mounted on bottom side, follow normal bake rule before processNote: Window time means from last bake end to next reflow start that has 168 hours space.3.3. Shipping InformationNO. Item Temperature (Degree) Time(Sec)1 Reflow Time Time of above 220 35~55 sec2 Peak-Temp 260 max
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -12-TAPE BOXSize: 340*340*70 mm Size: 340*340*350 mm (inside)Figure 11. Shipping InformationTo Be UpdateNote:1 tape = 500pcs1 box = 5 tapes = 5 * 500 pcs = 2500pcs
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -13-APPENDIX A: HW REFERENCE DESIGNDetailed HF-Z100 Evluation Board design source files, pls access High-Flying web download page orcontact with High-Flying technical support people to acquire.
HF-Z100 ZigBee Module User ManualShanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -14-APPENDIX B: CONTACT INFORMATION------------------------------------------------------------------------------------------------------------Address: Room.511/510, Building 7, No.365, Chuanhong Road,Pudong New Area,Shanghai, China, 201202Web:www.hi-flying.comService Online: 400-189-3108Sales Contact: sales@hi-flying.com-----------------------------------------------------------------------------------------------------------For more information about High-Flying modules, applications, and solutions, please visit our web sitehttp://www.hi-flying.com/en/<END OF DOCUMENT>© Copyright High-Flying, May, 2011The information disclosed herein is proprietary to High-Flying and is not to be used by or disclosed tounauthorized persons without the written consent of High-Flying. The recipient of this document shall respect thesecurity status of the information.The master of this document is stored on an electronic database and is “write-protected” and may be altered onlyby authorized persons at High-Flying. Viewing of the master document electronically on electronic databaseensures access to the current issue. Any other copies must be regarded as uncontrolled copies.
FCC INFORMATION (USA) FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. OEM INTEGRATION INSTRUCTIONS: This device is intended only for OEM integrators under the following conditions:The module must be installed in the host equipment such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the internal on-board antenna that has been originally tested and certified with this module. External antennas are not supported. As long as these 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example,
digital device emissions, PC peripheral requirements, etc.). The end-product may need Verification testing, Declaration of Conformity testing, a Permissive Class II Change or new Certification. Please involve a FCC certification specialist in order to determine what will be exactly applicable for the end-product. Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. In such cases, please involve a FCC certification specialist in order to determine if a Permissive Class II Change or new Certification is required. Upgrade Firmware: The software provided for firmware upgrade will not be capable to affect any RF parameters as certified for the FCC for this module, in order to prevent compliance issues. End product labeling: This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2ACSV-HF-Z100”. Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.

Navigation menu