Hisense Electric 32LCD001 LCD TV User Manual IES090319
Hisense Electric Co., Ltd. LCD TV IES090319
Contents
USERS MANUAL 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1124297 |
| Application ID | zOOTO1m4j9iHyh/Ko/jGYg== |
| Document Description | USERS MANUAL 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 203.09kB (2538667 bits) |
| Date Submitted | 2009-06-15 00:00:00 |
| Date Available | 2009-06-15 00:00:00 |
| Creation Date | 2009-04-21 17:37:36 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2009-04-21 17:37:45 |
| Document Title | IES090319-英.cdr |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | shihuijie |
Basic operation - Balance - Adjusts the volume of the left and right speakers. - Equalizer -You can select the frequency you want to adjust and change its value. . Surround Sound -Turns the surround sound effect on or off. - Auto Volume Control - Turns automatic volume control on or off. The option keeps the audio in a preset range to eliminate large spikes in volume. - SPDIF Type - Selects the SPDIF type. You can select PCM, Dolby Digital, or Off. Note: Via SPDIF Type, you can choose the opt|cal d|g|tal aud|o out type. If Aud|o Volume Control |s On, that means audio out control is activated. Setup 1. Press MENU to open On Screen Display (OSD) option 2. Press A or V to highlight Setup, then press b to enter the Setup menu. oso Language English Srrnen Moon Wide DPMS On Tlnleselup Caption Reset Delault ENTER 5k new g”- 3. Press A or V to highlight an option, then press 4 or b to adjust the option. You can adjust: - OSD Language - Use the right or left arrow button to choose the OSD Language among English, Spanish and French. - Screen Mode - Use the arrow button to choose the aspect ratio between picture width and picture height (High Definition 16:9 pictures will be displayed in original format 16:9, named Wide). The options for SD (Standard Definition 4:3) are Normal, Wide, Zoom and Cinema. - DPMS - This is a good function for a computer monitor. When DPMS is on, the computer will control the screen on or off. For example, if the computer is in sleep mode, the screen will be switched off. If the computer is activated, the screen also is activated. - Time Setup - You can set up the exact time by yourself. You can also set up Sleeper Time and Auto Sleep Time. - Caption: There are three items in it - Analog Closed Caption, Digital Closed Caption and Digital Caption Style. Analog Closed Caption: CC1, CCZ, CC3, CC4, TEXT1,TEXT2, TEXT3, TEXT4. Digital Closed Caption: Servicel, ServiceZ, Service3, Service4, Services, Service6. Digital Caption Style: There are two Caption Styles. One is the automatic function set as the broadcaster, while the other is the custom style where you can adjust the font size, color, background color etc., accordingly. Reset Default - Every TV has its original setting before leaving the factow. So this function helps you restore these settings. 18 Basic operation Parental Control 1. Press MENU to open On Screen Display (OSD) option 2. Press A or V to highlight Parental, then press b to enter the Parental menu. . Change Password Channel Blook lnputBlock Program Block ENTER OK MENU Em When you first use this function, the default password is [0000]. Once you input this password, you can: 3. Press A or V to highlight an option, then press 4 or b to adjust the option. You can adjust: - Channel Block - This function will let you block any channel you want. - Program Block - A. Rating Enable is on B. U.S. TV Ratings: You can choose TV ratings according to the illustration on the screen. C. The settings for U.S. Movie Ratings, Canada (English) Ratings and Canada (French) Ratings follow Step B. If you want to block the unrated program, please turn on this function. Following is the description of these ratings. About TV PG Rating: The TV ratings are divided into two groups: age-based and content-based. Age Defined as Contents Defined as TV'Y All children FV Fantasy Violence TV-Y7 Directed to older children . . D Suggestwe d|alogue TV-G General audience L Strong language TV-PG Parental Guidance suggested TV-14 Parents Strongly cautioned 5 Sexual 5|tuat|ons TV-MA Mature Audience only V Violence 19 Basic operation About MPAA Rating: The Motion Picture Association of America(MPAA) uses a rating system to qualify motion picture content. Television broadcasters employ a rating system to qualify the content of televison programs as well. The MPAA and TV ratings work with the V-CHIP feature and allow you to block out programming above the rating limits you determine. Rating Defined as G General audience PG Parental Guidance suggested PG-13 Parents strongly cautioned R Restricted NC-17 No one 17 and under admitted X Adult audience only About Canada (French) Rating Description G General 8 an5+ 8+General; Not recommended for young children Programming may not be suitable for children under 13ans+ theage of 13 16 ans+ Programming is not be suitable for children under the age of 16 18 ans+ Programming restricted to adults About Canada (English) Rating Description Children eight years and older G General Programming, suitable for all audiences PG Parents Guidance 14+ Viewers 14yearsand older 18+ Adult programming NOTE: As you block rating, all rating higher than the ones you select are blocked as well. For example, if you choose to block the MPAA rating R, the higher ratings, NC-17 and X, are automatically blocked too . 20 Basic operation ' Input Block - You can block the input source with this function. For example, if you want to block AV input, just highlight [AV] and press [ENTER].The AV input will not be seen in the screen. - Change Password - The first time you use this function, use the default password. If you want to change it, first enter the new password then enter the same password again. - Clean AII - This function will let you clean all the channels stored on this TV. Note: If you choose this function, all the programs you preset will be lost. Appendix Cleaning and Care WARNING: Do not try to remove the cabinet from the back. Refer sen/icing to qualified service technicians. To clean the TV screen: 1. Unplug the TV to avoid possible shock hazard. 2. Use a clean cellulose sponge or Chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause damage to the TV. 3. Wipe off any excess moisture with a clean dry cloth. 4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet. Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can damage the finish of the cabinet. 21 Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Customer important notice: If the TV functions cannot be operated, unplug the AC cord from AC power source, wait at least 1 minute, then re-plug AC cord. This will reset the TV settings and should restore TV to normal operation. Symptoms Possible Solutions TV will not turn on - Make sure the power cord is plugged in, then press Power. - The remote control batteries may be dead. Replace the batteries. - Unplug the VGA wire and plug the power wire again. - Plug another electrical device into AC outlet to confirm the outlet is working properly. No picture, no sound - Check lf you have set the timer off. - Check the antenna/cable connections. - Press [Display] to see if you have selected the right signal source. No sound, picture 0K - The sound may be muted. Press [VOL+ ] on the remote control. - The station may have broadcast difficulties. Try another channel. - Check the speakers cable connections. - Make sure headphones are not connected. Poor sound, picture OK - The station may have broadcast difficulties. Try another channel - Check the speakers cable connections. Poor picture, sound OK - Check the antenna connections. - The station may have broadcast difficulties. Try another channel. - Adjust the picture from the menu. Unable to select a certain channel - The channel may be skipped. Choose this channel by directly selecting the buttons from the remote control. Poor color or no color - The station may have broadcast difficulties. Try another channel. - Adjust Saturation in the Video settings menu. The remote control does not operate - There may be an obstruction between the remote control and the remote control sensor. - The batteries may be installed with a wrong polarity. - The remote control batteries may be dead. Replace the batteries. Disorder display at power on - This may be caused because of a very short interval between POWER OFF and ON. - Unplug the power and restart. 22 Appendix Wall-mounting Bracket Installation 1. Drill four holes according to the illustrated dimension and insert expanding bolts(4pcs of M8, bolt hole diameter-8mm, length -70mm) into the holes. 220mm or 320mm 65mm 2.Mount two fixture disks onto the wall-mountmg bracket using bolts. Fix the wall-mounting bracket to the expanding bolts. 3.Lay the TV on a plane tab‘e which could bear enough weight, and cover the surface ofthe table with soft cloth to avoid damage to LCD panel. Remove the four bolts fixing the stand and remove the stand from TV. —-—-—_—/ 200mm Appendix 4.Fix two round pegs to back cover of TV with bolts. Then attach two plain washers to the back cover as shown in the illustration. Insert cover board as the arrow shows. Round Peg Round Peg Plain washers Plain washers Insert cover board 5.Meet the mounting holes of the back panel with the fixture disks in the brackets and fix the TV to the wall-mounting bracket. Be cautious of the TV from falling. 1 TV Front view IlIIIII IlIII IIlIlII “M !||||||||||||||||l|r||| Hull' I I NOTE: Wall mount bracket is not included with TV and mounting of wall mount bracket to wall may vary depending on brand and size of bracket. Customer should consult bracket mounting instructions that came with wall mount for specific information on how to mount bracket to wall. 24 Appendix Speci ations Model 32LC3DSS7 Diagonal display size 31.5 Inches Television system American TV standard ATSC /NTSC system Audio multiplex ETSC system Channel coverage VHF: 2~13 UHF: 14~69 CATV:1~125 Digital Terrestrial Broadcast (8VSB): Z~69 Digital Cable (64/255 QAM):1N135 PC mode 640x480/60HZ,BDO><600/60Hz,1024><768/60Hz vpbpr/YCbCr mode 4801/60H1,480P/60Hz,720P/60Hz,10801/60Hz HDMI mode 4801/60H1,480P/60Hz,720P/60Hz,10801/60Hz Resolution 1366x768 Power source AC 120V,60 HZ Power consumption 118W Audio power 6W+SW Graphicinput RFinput Cable/ Antenna x1 VideoXi V'd _ t SiVideoX1 I eon pu ComponentXZ Connection HDMlXZ Interface Analog RGB 15pm ><1 Audio input AVAudi0X1 ComponentAudioXZ VGAAudio inpulXi Audio output Audio X1 Coaxial Audio outx 1 Headphone audio out x 1 Length: 31.5 inches Dimensions Width 23.5inche5 Height: 9.4 inches Weight 30.8 lbs Environmental conditions Temperature 5°C~35°C (41FN95F) Humidityi20%-80°/0RH, Atmospheric pressure:86kPa-106KPa Supplied accessories Remote control, AC cord, Batteries, User Manual, Warranty Card, QSG, Remote Control Guide, Warranty Registration card Design and specifications are subject to change without notice. CUSTOMER NOTICE: Use carefully when operating to prevent damage to the screen 25
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Modify Date : 2009:04:21 17:37:45+08:00 Create Date : 2009:04:21 17:37:36+08:00 Metadata Date : 2009:04:21 17:37:45+08:00 Creator Tool : PScript5.dll Version 5.2 Format : application/pdf Title : IES090319-英.cdr Creator : shihuijie Document ID : uuid:abfbdcfb-9bf9-496a-8f16-012fd3796618 Instance ID : uuid:e96d55eb-921f-4ec9-a022-6f02a2e9be31 Producer : Acrobat Distiller 7.0 (Windows) Page Count : 8 Author : shihuijieEXIF Metadata provided by EXIF.tools