Hisense Electric LCDCE0002 LCD TV User Manual IES091221

Download:
Mirror Download [FCC.gov]
Document ID	1284881
Application ID	e0trGIyieFVEnVOgb2ayOw==
Document Description	Users Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	298.54kB (3731713 bits)
Date Submitted	2010-05-21 00:00:00
Date Available	2010-05-22 00:00:00
Creation Date	2010-05-21 16:15:39
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2010-05-21 16:16:06
Document Title	IES091221.cdr
Document Creator	CorelDRAW Version 9.397
Document Author:	΢ÈíÓû§

Using the Remote Control
—
Basic Operation
Connectrng power cord to the TV
1. Connect the power cord to the connector on the back of the TV, if the power cord in accessories.
Note:When connectrng the power cord to the connector of the TV, make sure the power cord IS fully
inserted In the place. Bad contact may cause high temperature of the connector and the risk of fire or
other damages.
2. Connect the power cord to the AC power outIet.
Power ON/OFF
1. Connect the TV to a power outlet. Ifthe power Indicator is blue, It means that the TV is STANDBY, Press
the Standby button on the front controI or on the remote control to turn the TV on. Once the TV is turn on,
the power indicator will be turned off. Several seconds later, the TV picture wiII be displayed on
the screen.
2. Press the Standby button on the front control or on the remote control to turn the TV off temporarily.
3. Always remove the AC power plug from the outlet when not using this TV for a Iong period of time.
Signal source selection
Press the [INPUT] button to select TV, AV, Component, VGA and HDMI inputs. There are two
ways to select the source: One is to press the [INPUT] button continuously, while the other is to use the
ARROW and [ENTER] buttons to confirm the source.
SeIect channels
Please use [CHA / CHV] button on the remote panel to select channels. [CHA] Indicates channel number up;
[CHV] indicates channeI number down. Press [CHA / ChV] button on the srde panel of the TV to select the
channels. If you want to choose any of the skrpped channeIs, press the number directly.
Use [Mute] button
Press the [Mute] button to mute the sound. Press the [Mute] button again to resume the sound.
SeIect picture modes
Press the [PICTURE] button to select the picture mode from four options: Standard, Cinema, User or Vivid.
You can adjust the picture mode based upon your personaI preference.
SeIect sound modes
Press the [AUDIO] button to select sound modes from Standard, Speech, User or Music.
SeIect screen modes
Press the [ASPECT] button to select from six zoom modes: Wrde, Normal, Zoom, Cinema , Dot—to—Dot or Auto.
Use [GUIDE] button
Press the [GUIDE] button to display features of the ATSC program and the EPG function.
Use [DISPLAY] button
Press the [DISPLAY] button to view current source information.
17
Using the Remote Control
) |ck starts
Use [EXIT] button
Press the [EXIT] button to exit the OSD menu.
Select channels by numbers
To select a channel: Press the channel number you would like to go to. For example, to select channel number
120, press buttons 1, 2 and 0, respectively and then press [ENTER] to confirm.
Use [MENU] button
Press the [MENU] button to display the TV OSD menu.
Use [LAST] button
Press the [LAST] button to return to the previous channel.
Use [ENTER] button
Press the [ENTER] button to select a particular item.
Adjust Volume
Press [VOLA / VOLV] button to adjust the volume.
Use [CCD] button
Press the [CCD] button to change the CCD mode. Using this button Will set the Closed Caption mode when
viewing 3 DTV or TV channel.
Note: Set the default Closed Caption setting for all channels in the Menu. For ATV the options are 001, CC2,
CC3, CC4, TEXT1, TEXTZ, TEXT3, TEXT4 or Off. For DTV, the options are from Service1 to SerViceS or Off.
Use [MTS/SAP] button
Press the [MTS/SAP] button to change the sound mode (Mono, Stereo, SAP). This button will select the MTS
options of Stereo, SAP, or Mono in TV mode, alternate audio channels, and when available, in DTV mode.
Use [SLEEP] button
Press the [SLEEP] button repeatedly to set the sleep time, which can be set to: 10 Mins, 20 Mins, 30 Mins, 40
Mins, 50 Mins, 60 Mins, 90 Mins, 120 Mins or Off.
Use [TIME] button
Press the [TIME] button to display the current time.
18
Changing the TV Settings
) 5an the TV Menu
Press [MENU] button to display the main menu.
Tuner Mode Antenna Press [A/V] button to select TV item,
Channel Scan > Press [ b/ENTER] button to enter TV menu.
Channel Skip > Press [A/V] button to select the option,
MTS Stereo press [P/ENTER] button to enter or press []
Atldlu Language English button to adjust the option,
Press the [Menu] button to close the menu.
Adllls’ MEMA a
You can adjust:
_~mnral-_
' Tuner Mode 7 Select the TV signal source. You can
Ch l 0 Se hT‘ A t '
select Antenna or Cable. M“ m We ”em"
,_ ism/l
Channel Scan f Scans for channels that have signals DTV n W 0
and stores the channels information in memory.
DTV: The scanned TV programmes in digital signals.
MENU Retur"
TV: The scanned programmes in analog signals.
Channel Skip f Deletes a channel stored in memory.
When you press CHA or CHV. your TV skips the
channel you deleted. You can still tune to the channel
using the number buttons on the remote control. » 22:33
Analog
Analog
MTS , Selects the sound mode. You can select ‘ Analog
Mono, Stereo, or SAP(Second Audio Program) 7 rmrn Set
Audio Language , Selects the audio language for a
program.
SAP (Second Audio Program) , Depending on the
particular program being broadcast, you can listen to a
foreign—language translation.
19
Changing the TV Settings
> Using the Video Menu Cl
Press [MENU] button to display the main menu,
w | picme Mode Press [A/'] button to select Video item.
BHQMHESS ‘ Press [ b/ENTER] button to enter Video menu.
Contrast ,
Saturaucn Press [A/V] button to select the option,
HUE press [b/ENTER] button to enter or press []
Sharpness r— r . .
Color Temperature Standard button 1° adjust the option.
Advanced Video > Press the [Menu] button to close the menu.
ul Ad‘lst writ. am.
You can adjust:
' Picture Mode , Adjusts the Picture Mode. You can select Standard, Cinema, User or Vivid.
' Brightness , You can increase or decrease the brightness of the picture. Increasing the
brightness can add more light to dark areas of the picture, while decreasing the brightness can
add more darkness tolight areas of the picture.
' Contrast , You can increase or decrease the contrast of the picture. Increase the contrast to
adjust the white areas of the picture or decrease the contrast to adjust the black areas of the
picture.
' Saturation , Adjusts the intensity of the colors.
' Sharpness , You can increase the sharpness level for clearer images or decrease the sharpness
level for smoother images.
- Color temperature , Changes the color temperature. You can select the color temperature from
three options: Cool, Standard or Warm.
' Advanced Video , Accesses advanced video settings such as DNR, Adaptive Luma Control,
Flesh Tone and MFC.
<>DNR: It can optimize the picture signal from time
and space: reduce the outside noise interference and
. .. , . DNR
return the pure initial signal. It has four ratings: Low, Adaplrve Luma Control Of!
Standard, Strong and Off. 7 F|esh Tone orr
QAdaptive Luma Control: According to the content of MFC >
picture, it can adjust brightness automatically,
OFlesh Tone: When this feature is ”on” state, the TV
could be the basis of image content, for color ' ‘ Sula” Adluu um my
correction.
20
Changing the TV Settings
—
) Using the Video Menu Cl
OMFC: To improve the perception of moving images. —
The weak setting is suitable for most programs and
is recommended for general viewing. normal and .. Exam tiff;
strong settings can further enhance motion, however Demo Partition All
on some cases can create a halo effect on edges of
moving objects. You may need to switch settings
pending the contents your viewing.
MENU Buck.
PROSCAN using MFC's unique motion compensation technology, which eliminates the tail and jitter
of dynamic images effectively, and makes the image edge clearer.
It reduce the dynamic screen blur which is difficult to be perceived by human eyes. Even playing
rolling subtitles, the font edge is also clear.
Effect - Removes drag from fast scenes with a lot of movement to provide a clearer picture.
If you enable MFC (Motion Flow Compensation), noise may appear on the screen.
If this occurs. set "Effect" to off.
Custom : The TV can be set to automatically sense and process film signals from all sources
and adjust the picture for optimum quality.
- Mode 1 : Adjusts the judder reduction level from video sources when playing 24Hz films.
- Mode 2 : Adjusts the blur reduction level from video sources.
Demo Partition - Press [] buttons to choose Iefl, right or all in the screen for MFC Demo.
Demo - This is only intended for use in retail environments.
21
Changing the TV Settings
—
> Using the Audio Menu [l
1 Press [MENU] button to display the main menu.
2 Press [A/V] button to select Audio item.
3 Press [ b/ENTER] button to enter Audio menu.
Equalizer 4 Press [A/V] button to select the option,
SPDIF Type PCM press [b/ENTER] button to enter or press [ Using the Setup Menu D
1 Press [MENU] button to display the main menu.
OSD Language English 2 Press [A/V] button to select Setup item.
OSD T‘mem“ 155 3 Press [ b/ENTER] button to enter Setup menu.
Screen Mode Wide .
4 Press [A/V] button to select the option,
DPMS On
Time Setup press [b/ENTER] button to enter or press [4
Caption y button to adjust the option.
RESElDEfaU“ ’ Press the [Menu] button to close the menu.
in e x u
You can adjust:
' OSD Language , Use the right or left arrow button to choose the OSD Language among English,
Spanish and French.
- Screen Mode , Use the arrow button to choose the screen aspect ration from Wide, Normal,
Zoom, Cinema, DotftofDot or Auto,
0 Normal
The original 4:3 aspect ratio (1 .33:1 signal)
is preserved, so black bars are added to the
Ieftand right ofthe image. Standard TV
broadcasts are displayed with a 4:3 aspect ratio.
9 Wide
When watching a standard broadcast orfuII-frame
movie in this mode, the display image is stretched
proportionately to fill the TV screen.
When watching a widescreen (1 .78:1 signal)
program or movie, the display image fills the TV
9 Zoom
Stretches the 4:3 aspect ratio image vertically
and horizontally to fill the screen at 1:1.78
aspect ratio.
23
Changing the TV Settings
) Using the Setup Menu Cl
6 Cinema
Stretches the 4:3 aspect ratio image vertically
and horizontally to fill the screen at 1 :2.35
aspect ratio.
9 Dot to dot
Use the function to see the full image without any
cutoff, when HDMI (720p/1080i/1080p).
Component (1080i/1080p), DTV (1080l) or VGA
signals are inputs.
- DPMS f This is a good function for a computer monitor. When DPMS is on. the computer will
control the screen on or off. For example, if the computer is in sleep mode, the screen will be
switched off. If the computer is activated, the screen also is activated.
- Time Setup , You can set up the exact time by yourself. You can also set up Sleeper Time and
Auto Sleep Time.
_ Auto Synchronization
Time Zone Eastern Time
, Date
Time > »- .
SleepTlmer on T'me
Tlmer
Power On timer 12:00 AM
PcwerONtlmer 12 OOPM
MFNU new mmu Ba:-
24
Changing the TV Settings
—
) Using the Setup Menu El
- Caption: There are three items in it , Analog _m_
Closed Caption, Digital Closed Caption and Digital 7 Analgg cm mam,“
Caption Style Dlgltfil sea Caption
This is a function about caption, display caption by D'gna‘ Cum)" SMS
anolog signal and display caption by digital signal.
Analog Closed Caption: CC1, CCZ, CC3, CO4,
TEXT1, TEXT 2, TEXT3, TEXT4. ‘ ‘
Digital Closed Caption: Servicel, Service2. Service3, . menu Bart
Service4, Services, Services,
Digital Caption Style: There are two Caption Styles.
One is the automatic function set as the broadcaster, .
while the other is the custom style where you can 059mm”?
adjust the font size, color, opacity, background color
etci, accordingly.
As Broadcaster
' Reset Default 7 Every TV has its original setting
before leaving the factory. So this function helps , MEN Ba“
you restore these settings.
25

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2010:05:21 16:16:06+08:00
Create Date                     : 2010:05:21 16:15:39+08:00
Metadata Date                   : 2010:05:21 16:16:06+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Title                           : IES091221.cdr
Creator                         : ΢ÈíÓû§
Document ID                     : uuid:79f068ed-859d-488b-8e39-4ba8736c7f2c
Instance ID                     : uuid:454d5523-534f-4eb2-97ca-dd156c15b3c1
Producer                        : Corel PDF Engine Version 9.397
Page Count                      : 9
Author                          : ΢ÈíÓû§

EXIF Metadata provided by EXIF.tools