Hisense Electric LCDD0002 LCD TV User Manual LTDN40V68US

Hisense Electric Co., Ltd. LCD TV LTDN40V68US

Contents

USERS MANUAL 1

DX-L40-10A
CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep thesesafety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe. TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury. Tune into safety xOne size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV. xCarefully read and understand all enclosed instructions for proper use of this product. xDon’t let children to climb on or play with entertainment system furniture and TVs. xDon’t place TVs on furniture that can easily be used as steps, such as a chest of drawers. xRemember that children can become excited while watching a program, especially on a “larger-than-life” TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down. xMake sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children. Wall mountingIf you decide to wall mount your TV, always: xOne size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV. xFollow all instructions supplied by the TV and wall mount manufacturers. xIf you have any doubts about your ability to safely wall mount your TV, get help from a professional installer. xMake sure that the wall where you are mounting the TV is appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer. 1
xTVs can be heavy. At least two people are required for safe wall mount installation. Important safety instructions CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENThis symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer.  12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.  13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 2
15. The mains plug is the disconnecting device. The plug must remain readily operable.16. The apparatus with grounding-type plug is a class I apparatus. Class I apparatus need to be connected to earth ground wire to prevent possible electric shock. Make sure that you connect the class I apparatus to a mains socket outlet with a protective earthing connection.17. Remote control batteries should not be exposed to excessive heat such as sunshine, fire, or the like.WarningsElectric shock hazard To reduce the risk of electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualified service technicians. LightningFor added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges. Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Handling the LCD panel xYour TV's screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel.  If the screen breaks, be careful of broken glass.xIf the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.xIf the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.Replacement parts When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards. Safety check 3
After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.Power source Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company. CautionsDamage requiring service Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions: xWhen the power supply cord or plug is damaged or frayed. xIf liquid has been spilled or objects have fallen into your TV. xIf your TV has been exposed to rain or water. xIf your TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation. xIf your TV has been dropped or damaged in any way. xWhen your TV exhibits a distinct change in performance. AttachmentsUse only attachments recommended by Insignia.  Outdoor antenna grounding If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.67521344
1  Electric service equipment 2  Power service grounding electrode system 3 Ground clamps 4 Grounding conductors 5  Antenna discharge unit 6 Grounding clamp 7  Antenna lead-in wire Note to CATV system installer Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding.  Specifically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.CondensationMoisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly.  When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.   Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV.  Mobile telephone warning To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV. End of life directives Your TV contains tin-lead solder and a fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused.  For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to find a recycler in your area. Non-active pixels The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few nonactive pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.5
NOTEThe manufacturer is not responsible for any radio or tv iunauthorized modifications to this equipment. Such modifications could void the user's authority.NOTEThis equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radioCommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingMeasures:1.Reorient or relocate the receiving antenna.2.Increase the separation between the equipment and the receiver.3.Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.4.Consult the dealer or an experienced radio/TV technician for help.nterference caused byFederal Communications Commission StatementFederal Communications Commission Statement6
Base installation instruction CHILD SAFETY............................................................................712889991010101112121212131314141415151617171720202122242424252829
8
L           RVIDEO   S-VIDEO      HEADPHONE    HDMI1Power InputSERVICEHDMI3         HDMI2 COMP2VIDEO   L       RAV2 RCOMP1Y      PB      PR    L      R                                      AUDIO IN          VGA             VGA   L        RAUDIO OUT            Power Input9
L           RVIDEO   S-VIDEO      HEADPHONE    HDMI1SERVICEOKThe equipment with AV or S-Video output function ( such as VCD, DVD, set-top boxes, etc.).S-VIDEOAudio LVideoAudio R RedWhiteYellowVOLOPTICAL10
HDMI3         HDMI2 COMP2VIDEO   L       RAV2 RCOMP1Y      PB      PR    L      R                                      AUDIO IN          VGA             VGA   L        RAUDIO OUT             DVD With Component jacksORORYPCB/BPCR/Audio LAudio LAudio LVideoAudio RAudio RAudio R RedRedRedRedWhiteWhiteWhiteYellowBlueGreen The equipment with HDMI output jack ( such as DVD players, set-top boxes, etc.).ComputerOKVOLThe equipment with AV output function    ( such as VCD, DVD, set-top boxes, etc.).AUDIO   AMPLIFIER11
USBL           RVIDEO   S-VIDEO      HE A DPHONE    HDMI1SERVICE12
13
14

Navigation menu