Hisense Electric LCDD0009 Part15 Subpart B-LCD TV User Manual

Hisense Electric Co., Ltd. Part15 Subpart B-LCD TV

Contents

User Manual 2_Rev.1

13Changing channel settingsTo change the channel settings:1Press MENU. The Main menu opens.2Press   or   to highlight TV, then press ENTER or  . The TV menu opens.3Tuner Source –Lets you select standard Cable,  orHRC, IRCAuto Scan –Lets you scan for channels that have signals and stores the channels information in memory. When you press CH  or CH , your TV skips any channels that do not have a signal.inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings level you select. To watch programs that exceed the selected rating, you must enter a password.Press the number buttons to enter the four-digit password. The default password is 0000. You should change the password to a number you can remember. The Parental Controls menu opens.Change Passwordtime you use this function, use the default password (0000). enter the same password again.Program Block– A–Rating Enable is on.B–U.S. TV Ratings: You can choose TV ratings according to the illustration on the screen.C–The settings for U.S. Movie Ratings, Canada (English) Ratings, and Canada (French) Ratings follow Step B. If you want to block an unrated program, turn on this function. You can select all the ratings listed in the charts below.MTS/SAPU.S. TV ratings (age-based)These ratings are determined by the Federal Communications Commission (FCC).TV-Y All children.TV-Y7 Suitable for children 7 and older.TV-G General audiences.TV-PG Parental guidance suggested.TV-14 Parental guidance strongly suggested.TV-MA Mature audiences only.U. S. TV ratings (content-based)FV Fantasy violence.V Violence.S Sexual situations.L Strong language.D Suggestive dialog.U.S. movie (MPAA) ratingsThese ratings are determined by the Motion Picture Association of America (MPAA).G General audiences.PG Parental guidance suggested.PG-13 Suitable for children 13 and older.R Parental guidance suggested for children under 17.NC-17 Not suitable for children under 17.X Adults only.Press     or     to highlight an option, then press                  or      to accessthe option, and press      or      to adjust the option. You can select:ENTERAir. Closed Caption –Lets you set up closed captions. Choose from Closed Caption, Analog CC Mode, Digital CC Mode and .TEXT3, and TEXT4.Digital CC Mode –Service1, Service2, Service5, Service6 and  .–There are two digital caption styles. You can choose          to select the automatic function set by the broadcaster, and you can choose         to select the custom style where you can adjust the font size, color, opacity, background color.Service3, Service4,yesNoAnalog CC Mode –CC1, CC2, CC3, CC4, TEXT1, TEXT2, Closed Caption – Lets you select CC Mute. orParental Control –Lets you prevent your children from watching Access to Parental Control MenuPress     or     to highlight an option, then press                  or      to accessthe option. Press      or      to highlight a rating and press                     to ENTERENTERlock the rating and all other higher ratings or unlock the rating and all other lower ratings. Clear Downloaded RRTcurrent rating table in memory. (Rating Region Table) – Lets you delete Set Downloaded RRTunblock ratings. (Rating Region Table) – Lets you block orChanging channel settings LHDN32V88MH / LTDN42V77MHUS MPAA RatingUS TV RatingCA English RatingCA French RatingClear Downloaded RRTSet Downloaded RRTChange PasswordTV > Parental Control > US MPAA RatingNo
145Adjusting Power settingsTo adjust power settings:1Press MENU. The Main menu opens.23Language –Press the right or left arrow buttons to choose the OSD Language. Choices include English, Spanish and French.Screen Mode –Press the arrow buttons to choose the screen aspect ratio. Choices include Normal, Full Screen, Zoom1, Zoom2 Panorama. You can also press the ASPECT button on your remote control.DPMS Mode –Use this setting with a computer. When DPMSFor example, if the computer is in sleep mode, the screen is is activated, the screen also is activated.TV ON/OFF Time –Lets you set up auto turn TV on time and4Update EPG–Lets you update the digital program guide,which may show a list of available programs, program times,and program summaries, depending on the information provided by the broadcaster.  Press  MENU to return to the previous menu, or press EXIT  to close the menu.Press   or   to highlight Power, then press ENTER or  . The POWER menu opens.Press     or     to highlight an option, then press                  or      to accessthe option, and press      or      to choose a value and press                     to adjust the option. You can select:ENTERSleep –Lets you choose the auto sleep time. Choices includeENTER30 Minutes, 60 Minutes, 90 Minutes, 120 Minutes and.Power Mode –Lets you select energy saving mode to savepower consumption. Press  MENU to return to the previous menu, or press EXIT  to close the menu.Adjusting the TV settingsTo adjust the setup:1Press MENU. The Main menu opens.23Press   or   to highlight Setting, then press ENTER or  . The Setup menu opens.Press     or     to highlight an option, then press                  or      to accessthe option, and press      or      to choose a value and press                     to adjust the option. You can select:ENTER ENTERZoom V-Position–In zoom1 or zoom2 screen mode, lets you movepicture up or down vertically.OSD Timeout –Lets you set the main menu timeout time.TransparencyDate Time –Lets you set the exact time. You can set up date, time,time zone and daylight saving.Note: When clock update selects Automatically, TV will pick up time from signalif signal from source is available.Input Source Labeling –Lets you name each input. After labeling, select Enter on full keyboard to save.Canadian French ratingsdetermined by La Régle du cinéma du Québec.G General audiences.8 ans+ Suitable for children 8 and older.13 ans+ Suitable for children 13 and older.16 ans+ Suitable for children 16 and older.18 ans+ Adults only.Canadian English ratingsThese ratings are based on the Canadian Home Video Rating System, determined by the Canadian Motion Picture Distributors Association (CMPDA).C Suitable for all children.C8+ Suitable for children 8 and older.G General audiences.PG Parental guidance suggested.14+ Suitable for children 14 and older.18+ Adults only.Adjusting power settings and TV settingsLHDN32V88MH / LTDN42V77MH
15Remote controlGeneralNote: If the problem is not solved by using these troubleshooting The picture has a few bright or dark spots.A few bright or dark spots on an LCD screen is normal. It does not Good picture, but no sound.Make sure that the sound is not muted.Make sure that the sound mode is set to Stereo or Mono. For more information, see “Selecting the audio mode” on page 12.Audio noise. Make sure that there is no interference with infrared equipment such as a cordless telephone or headphones. Move the infrared equipment away from the TV to eliminate the noise.Problem SolutionRemote control does not work.Make sure that the TV power cord is plugged in.Make sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV.Make sure that the batteries are installed correctly. For more information, see “Installing remote control batteries” on page 6.Replace the batteries. For more information, see “Installing remote control batteries” on page 6.Trouble programming your existing universal remote control.Replace the batteries. For more information, see “Installing remote control batteries” on page 6.Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist.Problem SolutionProblem SolutionOne or more channels do not display.Make sure that the channels are not blocked. For more information, see “Setting parental controls” on page 13.Password is lost. Enter 0000 to access parental controls, then set a new password. For more information, see “Setting parental controls” on page 13.Some settings cannot be accessed.If a setting is grayed, the setting is not available in the current video input mode.TV cabinet creaks. When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.Control buttons on the TV do not work.Disconnect the power cord, wait a few seconds, then reconnect the power cord and turn on the TV.TroubleshootingBefore calling for service, check the following information for possible solutions to problems you may experience. If none of these solutions Caution: Do not try to repair the TV yourself. Refer all servicing to Video and audioProblem SolutionNo picture (screen is not lit) and no sound.Make sure that the power cord is plugged in.Press POWER  on the TV or the remote control.Make sure that the correct video input source is selected. For more information, see “Selecting the video input source” on page 9.Try another channel. The station may be experiencing problems.Dark, poor, or no picture (screen is lit), but sound is good.Adjust the brightness. For more information, see “To adjust the picture:” on page 12.Make sure that the correct picture mode is selected. For more information, see “To adjust the picture:” on page 12.Make sure that the antenna or cable TV is connected correctly and securely. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 8.No color, dark picture, or color is not correct.Adjust the color saturation. For more information, see “Adjusting the picture” on page 12.Only snow (noise) appears on the screen.Try another channel. The station may be experiencing problems.Make sure that the antenna or cable TV is connected correctly and securely. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 8.Dotted lines or stripes appear on the screen.Adjust the antenna.Move the TV away from noise sources such as cars, neon signs, or hair dryers.Double images. Try using a highly directional outdoor antenna or cable TV.Troubleshooting LHDN32V88MH / LTDN42V77MH
16Weight and dimensions shown are approximate.Legal noticesFCC Part 15This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.that to which the receiver is connected.Consult the dealer or an experienced technician for help.FCC warningresponsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.CablesConnections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.Canada ICES-003 statementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.Standard Television Receiving Apparatus — Appareil de réception télévision ordinaire, Canada BETS-7 / NTMR-7HDMItrademarks or registered trademarks of HDMI Licensing LCC.TV type LHDN32V88MHTV panel 31.5-inch TFT LCDLTDN42V77MH42-inch TFT LCDTV system NTSC-M, ATSCReceiving channels VHF: 2 - 13UHF: 14 - 69CATV: 1 - 125CADTV: 1-135DTV: 2-69Audio multiples BTSC systemAudio out 6 W x 2 8 W x 2Power requirement AC 120 V, 60 HzPower consumption 140 W (With Max backlight)180 W (With Max backlight)Dimensions(W × H × D with stand)31.02×22.09×9.92 inches (788 × 561 × 252 mm)40.2×27.6×12 inches 1020×700×302.9 mm)Weight with stand 27.56 lbs. (12.5 kg) 44.1 lbs. (20 kg)Input terminals Composite video/L and R audio (1)Component video/L and R audio (2)HDMI (4)VGA/audio (1)ANT/Cable In (1)Output terminals Digital Coaxial Audio (1)Headphone (1)Control terminals SERVICE PORT (1)S-Video (1)MaintenanceJust like with any other household appliance, the performance and life-expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LCD screen.Cautions:disconnected from the power outlet before cleaning the TV.Never spray or pour any liquid directly onto the screen or the case.CleaningClean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution.Clean the screen with a clean, soft, lint-free cloth. If additional cleaning is necessary, apply a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution to the cloth.Specifications, Legal noticesLHDN32V88MH / LTDN42V77MH
KB LOCKHotel Settings > FUNCTION LOCK > KB LOCKOffOffOnOffOnOffOffOffOffOffSEARCH LOCKUSER SAVE LOCKSUBMENU LOCKINPUT SELECTIONPARENTAL LOCKINFO LOCKPICTURE LOCKAUDIO LOCKPOWER LOCKSETTING LOCK17Adjusting hotel settingsTo adjust hotel settings:1Press MENU. The Main menu opens.2Press   or   to highlight Audio, then press ENTER or     , audio3HOTEL MODE —Allows installer to active or disable hotel options. TV ON SETTING —Allows installer to set up initial options eachPress     or     to highlight an option, then press                  or      to accessthe option, press      or      to select a value and press                   to adjustthe option. You can select:ENTER menu opens. Press     or      to highlight balance, use     or      to  adjust to zero, then press the number buttons to enter the three- digit password 5 4 8. The Hotel Settings Menu opens.Note: Please redo above step if fail when opening Hotel Settings Menu.ENTER: Hotel options are active. On: Hotel options are disabled. time a guest turns TV on.On VolumeIn ON mode,                                            can be adjusted  from 0 to 100.ON VOLUME VALUEOn SourceInput options. Choices include  antenna (      )TV  , AV, S-VIDEO,component (                                    )YPbPr1, YPbPr2  , HDMI1,HDMI2,HDMI3,HDMI4            VGA.andwill remember previous input source.LASTHDMI4            VGA.on source will activate                                selection andTV                                              ON CHANNEL                               ON CHANNEL NUMBER.—Allows installer to set up desiredOn Channel Numberchannel when TV is turned on. If no desired channel is requestedON CHANNEL—Allows installer to choose one of three options. ChoicesLOGOare                                 and                          .: No logo when TV is turned on. TV goes directly to source.OFF: Displays Hisense TV logo.HISENSE: Displays customed logo.WELCOMEHow to update customed logo: Make a picture with .bmp format  and size less than 480k. Name it exactly as  splash1-3549B1-ACM607002-   .bmp. A---B---Copy correctly named picture to a USB drive.C---D---Turn TV on and welcome logo will be updated successfully. E---—Allows installer to select one of three options.Power OnOFF, HISENSE WELCOMEChoices are                      andLAST, ON          Standby.: TV will return to whatever operation it was in before powerLAST outage.ON : TV will turn on when power is restored.Standby : TV will be activated but not turned on.—Allows installer to active or disable basic settings.Basic SettingON : TV picture defaults to Normal viewing mode, Normal Audio OFF : Installer can go to                                    and adjust settings.and Zoom Aspect is full screen.User Save LockFUNCTION Lock —Allows installer to lock the following functions.—Locks key pad buttons.kB LockOFF: Usable.ON : Locked down (disabled).—Locks channel scan function in Menu.Search Lock OFF: Usable.ON : Locked down (disabled).—Locks hotel guest adjustment.User Save Lock OFF: Menu features can be adjusted by hotel guest and be ONremembered in TV memory.factory default settings.—Locks advanced menu settings.Submenu Lock OFF: Allows access to submenu video: Reset in picture Menu,ONUpdate EPG (Electonic Program Guide).Settings functions.: Disables Video Reset,  Update EPG, Power Options and allInput SelectionOFF: Locked down (disabled).ON : Usable.—Locks parental control function in Menu.Parental LockOFF: Locked down (disabled).ON: Usable.Info LockOFF: Programing name and description (if available) aredisplayed when info button on remote is touched. ProgramingLHDN32V88MH / LTDN42V77MHHotel SettingsHOTEL MODEHotel Settings > HOTEL MODEOn1000OnNoREAD OUTTV ON SETTINGFUNCTION LOCKMAX VOLUMEMIN VOLUMEAUTO STANDBYCHANNEL SETTINGSRS ENABLECLONEHOTEL SETTINGSW VersionON VOLUMEHotel Settings > TV ON SETTING > ON VOLUMEOn10LASTOff1HISENSESTANDBYOffON VOLUME VALUEON SOURCEON CHANNELON CHANNEL NUMBER LOGOPOWER ONBASIC SETTING
18CLONING OPTION 1.Plug in new TV.A---Plug in loaded USB drive.B---Turn TV on.C---On screen will acknowledge USB detected.D---Press menu.E---Key in numbers 2 5 6 6 3 on remote.F---Cloning option will appear on screen.G---CLONING OPTION 2.Take loaded USB drive to next unit, plug in next installationA---Plug in loaded USB drive.B---Turn TV on.C---Go to Menu.D---Go to Audio menu.E---Go to Balance. Use arrows to adjust to zero.F---Enter access code 548 with remote number key. Hotel  menuG---unit (You do not need to have sources connected).Go to clone near bottom.H---opens.Choose option Write In. Hit Enter on remote. Cloning option J---will appear on screen.Select Yes. System will acknowledge download success. TVk---will be cloned.HOTEL SETTINGset SSID for Pro:Idiom decording—Allows installer to mute speaker, reset options and  Hotel Mute: TV is muted. User can not adjust volume.—Allows installer to mute TV speaker.ON: TV is not muted. User can adjust volume.OFFOptions Reset: Resets unit to factory default settings (normal).—Allows installer to reset hotel settings to original YES: Keeps all current settings.NOfactory default settings.SSID —Set or reset SSID code for Pro:Idiom decording. Set SSID: Reset to factory default code.YES—Enter new SSID code.Reset SSID—Reset SSID code to factory default value.: Maintain current settings.NOSW Version —shows current software version information.SRS ENABLE: Surround Sound is disabled.NO: Surround Sound is active.YESCLONE(copy) settings to any additional units you are installing.First plug in USB drive to unit that is already set up. (TV will showA---USB found).Select READ OUT which brings up cloning function.B---Select YES to clone (copy). When complete, TV  will show uploadC---success. Hotel Menu will close automatically.MAX VOLUME —Allows installer to adjust max volume from 0 to 100.: TV will stay on with no signal.OFFMIN VOLUME —Allows installer to adjust minimum volume from 0 to 100.The volume value can be input by digit-number buttons on remote.The volume value can be input by digit-number buttons on remote.AUTO Standby: TV goes to Standby mode when there is no signal after 15 mimutes.ONhotel settings menu.CHANNEL SETTINGS —Allows access to channel setting without exiting: In channel setting mode, Allows editing and Program Guide Editremapping of channels available. Using the color keysinstaller can change channel position and name.ON : No detail information on channel.info may also be available depending on provider.—Locks Picture adjustments in menu.Picture LockOFF: Picture adjustments in menu are allowed by user.ON : Locks all picture adjustments.—Locks Audio adjustments in menu.Audio LockOFF: Audio adjustments in menu are allowed by user.ON : Locks all audio adjustments except Balance.—Locks Power menu adjustments in menu.Power LockOFF: Allows normal access to Power menu.ON : Locks all Power menu functions including DPMS Mode, Sleep Mode, Timer Mode and Energy Saving mode.—Locks Settings menu adjustments in menu.Setting LockOFF: Allows full access to Settings (5th Icon on right) menu.ON : Locks all Settings menu functions including Language,Aspect ratio, Zoom, OSD Timeout, Transparency and Date & Time.LHDN32V88MH / LTDN42V77MH Hotel SettingsHotel Settings > CHANNEL SETTING > PROGRAMHotel MUTEHotel Settings > HOTEL SETTING > Hotel MUTEOffNoOPTIONS RESETSSID46.1 WGCL - TV (19) eng [eng]                                 TV (1080i)The Talk ( USTV - 14)  10:00 - 11:0                                       TVActress Eva LaRue;chefs Gina and Patrick Neely;a young woman whosedaughter has a heart defect;guest host Gina Neely.020 WGCL - TV (19) eng [eng]                                 TV (1080i)TVNo001002003004005006007008009010011012013PHY.2345678101910721112Program2.03.04.05.06.07.08.08.19.010.010.311.012.0Skip      NameE2  1  WG   E2  2  WXRename:Skip:Copy:Delete:Swap:Enter:Select: Return: Exit: Menu

Navigation menu