Hisense Electric LCDD0019 Part15 Subpart B-LCD Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1695245
Application ID	161zUz7KSckKskVxIA1EyQ==
Document Description	W9HLCDD0019_user Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	194.4kB (2430001 bits)
Date Submitted	2012-05-10 00:00:00
Date Available	2012-05-12 00:00:00
Creation Date	2012-04-12 15:47:04
Producing Software	Acrobat Distiller 9.4.6 (Windows)
Document Lastmod	2012-04-12 15:47:04
Document Title	Users Manual
Document Creator	Adobe InDesign CS5.5 (7.5)
Document Author:	liyansong

32D77W
42D77W
www.hisense-usa.com
service@hisense-usa.com
ES-G121404
English
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the

         
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
FCC Statement
Energy Star
NOTE:
Your Hisense TV is ENERGY STAR
qualified in the “Home” mode. It meets
strict energy efficiency guidelines set
by the U.S. Environmental Protection
Agency and Department of Energy.
ENERGY STAR is a joint program of
these government agencies, designed
to promote energy efficient products
and practices. Changes to certain features, settings, and
functionalities of this TV (i.e. TV Guide, Picture, Sound) can
increase or change the power consumption. Depending upon
such changed settings, the power consumption may exceed
the limits required for the ENERGY STAR qualification in the
“Home” mode.
This equipment has been tested and found to comply with
the limits for a class B digital Device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio Communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
NOTE
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable.
FCC ID Number WiFi Module: WWMMN421V1
WARNING
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to
this equipment. Such modifications could void the user's
authority.
!!"    #$%   &  '  (#%&'TM) technology.
#%&' #%&'   #$%   &  '            #%&'*  **+
Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other
countries. All other trademarks are property of their respective owners. 2011 Hisense USA, Corporation. All Rights Reserved.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
         
owners.
                
II
Important Safety Instructions
19. If an outside antenna or cable system is connected to the
unit, be sure the antenna or cable system is grounded to
provide some protection against voltage surges and builtup static charges, Section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with respect
to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with cart, stand, tripod,
bracket, or table specified by the
m a n u f a c t u r e r, o r s o l d w i t h t h e
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
15. Apparatus should not be exposed to dripping or
splashing, and objects filled with liquids, such as vases,
should not be placed on the apparatus.
16. An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching
such power lines or circuits, as contact with them might
be fatal.
17. Do not overload wall outlets and extension cords, as this
can result in a risk of fire or electric shock.
18. Do not push objects through any openings in this unit,
as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill
or spray any type of liquid into the unit.
20. When replacement parts are required, be sure the service
technician uses replacement parts specified by the
manufacturer or those that have the same characteristics
as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
21. Upon completion of any service or repairs to this unit,
ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
22. When you connect the product to other equipment, turn
off the power and unplug all of the equipment from the
wall outlet. Failure to do so may cause an electric shock
and serious personal injury. Read the owner's manual of
the other equipment carefully and follow the instructions
when making any connections.
23. Sudden high volume sound may cause hearing or
speaker damage. When you use headphones, (if the unit
is equipped with a headphone jack) keep the volume at a
moderate level. If you use headphones continuously with
high volume sound, it may cause hearing damage.
CONDENSATION:
Moisture will form in the operating section of the unit if the
unit is brought from cool surroundings into a warm room or
if the temperature of the room rises suddenly. When this
happens, unit's performance will be impaired. To prevent
this, let the unit stand in its new surroundings for about an
hour before switching it on, or make sure that the room
temperature rises gradually.
Condensation may also form during the summer if the unit is
exposed to the breeze from an air conditioner. In such cases,
change the location of the unit.
III
Important Safety Instructions
HOW TO HANDLE THE LCD PANEL:
End of life directives
Do not press hard or jolt the LCD panel. It may cause the
LCD panel glass to break and injury may occur.
If the LCD panel is broken, make absolutely sure that you
do not touch the liquid in the panel. This may cause skin
inflammation.
If the liquid gets in your mouth, immediately gargle and
consult with your doctor. Also, if the liquid gets in your eyes
or touches your skin, consult with your doctor after rinsing
for at least 15 minutes or longer in clean water.
Your TV also contains material that can be recycled and
reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at
www.eia.org to find a recycler in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors,
which provide exceptionally sharp video quality. Occasionally,
a few non-active pixels may appear on the screen as a
fixed black (in the case of a dead pixel), blue, green, or red
point. These non-active pixels do not adversely affect the
performance of your TV, and are not considered defects.
Possible Adverse Effects on LCD Panel:
If a fixed (non-moving) pattern remains on the LCD Panel
for long periods of time, the image can become permanently
engrained in the LCD Panel and cause subtle but permanent
ghost images. This type of damage is NOT COVERED BY
YOUR WARRANTY. Never leave your LCD Panel on for long
periods of time while it is displaying the following formats or
images:
Fixed Images, such as stock tickers, video game patterns,
TV station logos, and websites.
Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a normal
(4:3) display (black bars at top and bottom of screen); or
viewing normal style (4:3) media on a widescreen (16:9)
display (black bars on left and right sides of screen).
Power source
TO USE AC POWER
1. The power cord is attached to the TV at the factory.
2. Connect the AC cord into an AC outlet.
WARNING
Do not connect this unit to the power using any device
other than the supplied AC cord. This could cause fire,
electrical shock, or damage.
The following symptoms are not signs of malfunction
but technical limitation. Therefore we disclaim any
responsibility for these symptoms.
Do not use with a voltage other than the power voltage
specified. This could cause fire, electrical shock, or
damage.
LCD Panels are manufactured using an extremely high
level of precision technology, however sometimes parts
of the screen may be missing picture elements or have
luminous spots.
This is not a sign of a malfunction.
Do not install the LCD Panel near electronic equipment that
produces electromagnetic waves. Some equipment placed
too near this unit may cause interference.
Effect on infrared devices - There may be interference
while using infrared devices such as infrared cordless
headphones.
CAUTION
When this unit is not used for a long time, (e.g., away on
a trip) in the interest of safety, be sure to unplug it from
the AC outlet.
Do not plug/unplug the AC cord when your hands are
wet. This may cause electrical shock.
Declaration of Conformity
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and (2)
This device must accept any interference received, including
interference that may cause undesired operation.
IV
Important Safety Instructions
INFORMATION ACCESSED OR OBTAINED VIA HiSmart IS PROVIDED "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE, OF NON INFRINGEMENT.
SOME JURISDICTIONS DO NOT ALLOW FOR THE
EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE
EXCLUSIONS MAY NOT APPLY TO YOU.
Disclaimer: Hisense USA companies ("Hisense"). A wired
or wireless Internet connection is required for certain features
and is not included with the television; please contact a
local Internet Service Provider for assistance. Content
suppliers may require a subscription to activate or use their
services which is not included with the television and is sold
separately. The Hisense TV web browser supports a variety
of multimedia platforms however it does not support all
players nor does it support every player version, therefore,
access to certain web content may be limited or unavailable.
Access to certain areas of the Hi-Smart portal is restricted
and requires a password for entry. If you are an authorized
password holder, you agree that you are entirely responsible
for the confidentiality of your password and account
information, and agree to notify Hisense immediately if your
password is lost, stolen, disclosed to an unauthorized third
party, or other wise may have been compromised. You agree
that you are entirely responsible for any and all activities
which occur under your account, including any fees which
may be incurred under your password protected account
whether or not you are the individual who undertakes such
activities. You agree to immediately notify Hisense of any
unauthorized use of your account or any other breach of
security in relation thereof known to you.
INTERNET CONNECTION, ACCEPTANCE OF END USER
LICENSE AGREEMENT (EULA) AND REGISTRATION
OF YOUR HISENSE TELEVISION SERIAL NUMBER IS
REQUIRED. YOU MUST BE AT LEAST 13 YEARS OF AGE
TO REGISTER ONLINE. HISENSE MAY ADD, DELETE,
MODIFY, OR TERMINATE ONLINE SERVICES WITHOUT
NOTICE.
Consent to Use of Data: To facilitate the provision of
software updates, any dynamically served content, product
support and other services you agree that Hisense and its
affiliates may collect, use, store and transmit technical and
related information that identifies your television (including an
Internet Protocol Address), its operating system, application
software and any connected devices. Hisense and its
affiliates may also use this information in the aggregate, in
a form which does not personally identify you, to improve
our products and services and we may share anonymous
aggregate data with our third party service providers.
You acknowledge that Hi-Smart may include certain
inaccuracies or typographical errors which may affect the
quality of materials and third-party content. You acknowledge
that the materials or any third-party content have not been
independently verified or authenticated in whole or in part
by Hisense, and agree that Hisense does not warrant the
accuracy or timeliness of materials or the third-party content,
and further agree that Hisense has no liability for any
omissions in the materials and content, whether provided by
Hisense or any third-party.
Internet Performance Issues: A broadband Internet
connection is required for access to Internet Apps and
Content. To avoid poor performance while accessing Internet
Apps and Content, be sure other devices on the same
Internet connection are not running file sharing applications,
streaming audio or video content and are not logged in
to chat-rooms. These applications may consume your
connection’s bandwidth, causing lag or other undesirable
effects. This television uses TCP and UDP port(s) to access
Internet Apps and Content. Please consult your router or
personal firewall documentation for information on how to
allow access to these ports. If you are installing this television
on a corporate Internet connection, contact your network
administrator for information and assistance.
To the maximum extent permitted by applicable law, Hisense
shall not be liable to you or a third-party claiming through
you for any damage suffered as a result of your displaying,
copying or downloading information or material accessed or
obtained via Hi-Smart. In no event shall Hisense be liable
to you or any third-party for any indirect, extraordinary,
exemplary, punitive, special incidental or consequential
damages (including loss of data, revenue, profits or other
economic advantage) however arising, whether for breach
or in tort even if HISENSE has previously advised of the
possibility of such possible damage.
Liability: The Hi-Smart portal may be linked to other
sites on the World Wide Web or Internet which are not
under the control of or maintained by Hisense. Such
links do not constitute an endorsement by Hisense. You
acknowledge that Hisense is providing these links to you
only as a convenience; you further agree that Hisense is not
responsible for the content of such sites.
Technical Support: If you have questions regarding
installation, configuration or operation of this product, please
telephone a Hisense Customer Care representative who
will be happy to assist you with any difficulties you may be
experiencing.
Dial: 1-888-935-8880 (Toll Free)
Email: service@hisense-usa.com
Contents
Getting Started
Accessories List............................................................................................... 3
Installing the Stand .......................................................................................... 3
Installing a Wall-Mount Bracket ....................................................................... 4
When Installing the TV Against a Wall or Enclosed Area ................................ 5
Viewing the Control Panel ............................................................................... 6
Viewing the Remote Control ............................................................................ 7
Installing Batteries in the Remote Control ....................................................... 8
Match the Remote Control with TV.................................................................. 8
Making Connections ........................................................................................ 9
Basic Features
Turning the TV on or off .................................................................................. 13
Turning the TV On for the First Time .............................................................. 13
Selecting the Input Source ............................................................................. 13
Changing Channels / Volume ......................................................................... 14
Shortcuts Instructions ..................................................................................... 14
To Use the Menu ............................................................................................ 15
Using the Picture Menu .................................................................................. 15
Using the Audio Menu .................................................................................... 15
Using the Screen Menu .................................................................................. 16
Using the Channels Menu .............................................................................. 16
Using the Settings Menu ................................................................................ 17
Using the Lock Menu ...................................................................................... 18
Advanced Features
Network Connection ....................................................................................... 19
DLNA Settings ................................................................................................ 22
Media Share Settings in Computer................................................................. 23
Settings to Share Files ................................................................................... 23
Contents
Advanced Features
Network Function............................................................................................ 24
Enter the Network Applications....................................................................... 25
VUDU HD Movies ........................................................................................... 25
VUDU Apps .................................................................................................... 27
 .............................................................................................................. 27
Opera.............................................................................................................. 28
YouTube ......................................................................................................... 30
Other Apps...................................................................................................... 31
Other Information............................................................................................ 32
Digital Media Play ........................................................................................... 33
Enjoy Video Files ............................................................................................ 33
Enjoy Music Files............................................................................................ 34
Browse the Pictures........................................................................................ 34
Browse the Text Files ..................................................................................... 35
Other Information
Trouble Shooting ............................................................................................ 36
General ........................................................................................................... 38
Illustrations are for your reference only!
Getting Started
Accessories List
USER MANUAL
User Manual
Screws:
Quick Setup Guide
Warranty Card
Quick Setup Guide
Warranty Card
Screws for 32" (ST4×L16)×3
Remote Control
Battery × 2
Screws for 42" (M6×L12)×4
Installing the Stand
NOTES
1. The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or
sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure
on the front of the TV at any time because the screen could crack.
2. For tabletop use, the TV must be attached to the provided stand as shown on this page.
3. To Wall-Mount, brackets (not provided) must be attached to the TV as shown on next page.
WARNING
Be sure to disconnect the AC power cord before installing a stand or Wall-Mount brackets.
CAUTION
Use a covered table or bench to lay the TV on and handle the TV carefully to prevent damage to the TV screen or cabinet
during assembly.
Follow the illustrations below to complete the installation steps:
. 32D77W
1. Attach the stand to the TV set as shown in the picture.
2. Use the screws (ST4XL16)X3 to fix the stand tightly.
(ST4XL16)X3
Getting Started
. 42D77W
1. Take out the base and insert it into the installing slot in the lower part of the TV until all of the holes match each other.
2. Fasten the base and the TV set together with the 4×(M6×L12) screws provided.
Installing a Wall-Mount Bracket
If you want to attach the TV to a Wall-Mount bracket (not provided), you should first remove the stand if it is pre-attached .
1. Place the spacers (not provided) in the corresponding bracket holes. Attach purchased bracket (1.5 ~ 2.5 mm thickness) on
the TV with 4 screws (M6 × L25)(not provided) . Follow instructions provided with the wall bracket.
32D77W
42D77W
Bracket
(1.5~2.5mm)
Bracket
(1.5~2.5mm)
Screw (M6 × L25)
Wall-Mount hole pattern VESA (mm)
Wall-Mount screw size (mm)
Screw(M6 × L25)
200 × 200
Wall-Mount hole pattern VESA (mm)
M6
Wall-Mount screw size (mm)
400 × 200
M6
WARNING
Use only the 4 screws (M6 × L25) (not provided) to prevent internal damage to the TV set or cause it to fall.
2. Follow instructions provided with the Wall-Mount bracket.
If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect
assembly.
The selected screws are 6.5 ~ 7.5 mm in length when measured from the attaching surface of the TV's rear cover. The
diameter and length of the screws differ depending on the Wall-Mount Bracket model.
Getting Started
6.5 ~ 7.5 mm
Wall-Mount Bracket
Screw
Spacer
the TV's rear cover
When Installing the TV Against a Wall or Enclosed Area
Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the
TV at temperatures below Inadequate air 41°F (5°C).
Install with stand
Install on the wall
12 inches
(30cm)
4 inches
(10cm)
12 inches
(30cm)
4 inches
(10cm)
2 38 inches
(6cm)
4 inches
(10cm)
4 inches
(10cm)
Leave at least this much
space around the set.
Leave at least this much
space around the set.
4 inches
(10cm)
Never install the TV set as follows:
Air circulation is blocked.
Wall
Wall
Inadequate air circulation can lead to overheating of the TV and
        
Getting Started
Viewing the Control Panel
,1387
Power indicator Remote sensor
item
Description
Power Sensor
Receives remote signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Power Indicator
Light up in standby mode.
MENU
Open or close the OSD menu
INPUT
Select among the different signal sources.
CH
Select the channel
!#$!#$
Adjust the volume.
Standby button
Turn on the TV or put the TV in standby mode.
NOTES
FOR ILLUSTRATION ONLY.
Powering up or down the TV requires several seconds of processing time. Do not rapidly turn the TV on/off as abnormal
operation may occur.
Getting Started
Viewing the Remote Control
Battery indicator
Power on/off
Select input source
Invalid button
Direct channel selection
Dash button
(use when entering a digital sub-channel )
Go to the previous channel
$    %
Enter the internet Apps and Digital Media
Player
Channel Up
Launch Vudu Movies App
Increase Volume
Decrease Volume
Channel Down
Audio Mute button
Return to the previous menu
Menu button
 / /
Navigate Up/Down/Left/Right or
adjust on-screen menu settings
 
Display the favorite channel list
Display the information banner
 
Open the DTV program guide
(if available)
Close the menu
Sleep timer button
Zoom button
Media content control function buttons
Special function buttons
Select picture mode
Select sound mode
Select AV input source
Audio select button
Adjust Closed Caption Decoder (CCD) mode
Select HDMI input source
Select VGA input source
Select COMPONENT input source
NOTES
FOR ILLUSTRATION ONLY.
[RED/GREEN/YELLOW/BLUE] buttons are used for Electronic Program Guide (EPG). After pressing the [GUIDE], [Hi-Smart]
or [Hi-DMP] button, the same color buttons will appear with explanations in the on-screen display (OSD). Follow the steps
shown in the OSD.
Getting Started
Installing Batteries in the Remote Control
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in
the battery compartment.
3. Close the battery compartment cover.
Gently push and slide
Insert the batteries
Gently push and slide
NOTES
1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire.
2. Do not mix battery types or combine used batteries with new ones.
3. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
4. If you do not intend to use the remote control for a long time, remove the batteries.
5. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.
6. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your
skin, wash immediately.
7. Do not mix old and new batteries.
8. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
1. Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television!
2. If you would like to program your other household remote controls to your new Hisense television,please consult the
User’s Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’ User’s Manuals should include
instructions on how to program their remote to your television.
3. Below is a list of Hisense codes for the most common Cable and Satellite providers. Use the Hisense code that is associated
with your Cable or Satellite provider (if applicable).
DIRECTV…………………………………..0178 or 10019
Time Warner Cable……………………….386 or 0178
Comcast…………………………………....0178
Cox Communications……………………..0178
Dish Network………………………………627 or 505
If the Hisense code associated with your Cable or Satellite provider is not listed above,if the code above does not work, or if
you cannot locate the instructions for programming your household remote to your television,call your local Cable or Satellite
provider’s customer service center.
If your Cable or Satellite provider does not have an Hisense code available,please visit http://www.hisense-usa.com for
additional codes.
Getting Started
USB
ANT/CABLE IN LAN
DC5V
USB
0.5A(MAX)
Making Connections
LAN
ANT/CABLE
HDMI
DIGITAL
AUDIO OUT
HDMI
PR
COMP
PB
PC/DVI
AUDIO IN
HDMI
PC IN
Power input
HDMI3
HDMI2
DIGITAL AUDIO OUT
PC/DVI
AUDIO IN
HDMI1
HDMI4
AV
VGA
VGA
VIDEO
VIDEO
COMPONENT
HDMI
HEADPHONE
HEADPHONE
Item
Description
ANT/CABLE IN
Connect an antenna or cable TV to this jack.
HDMI
HDMI (High-Definition Multimedia Interface)provides an uncompressed,
all digital audio/video interface between this TV and any HDMI-device,
such as a set-top box, Blu-ray disc player, or A/V receiver.
COMPONENT
Connect to a DVD player, Digital Set-Top-Box, or other A/V devices with
component (YPBPR) video and audio output jacks.
VIDEO/AUDIO(L,R)
Connect to the composite video and audio (L/R) output jacks on external
video devices.
VGA
PC/DVI AUDIO IN
Connect to a PC or other devices with a VGA interface.
HEADPHONE
Connect headphone for private listening.
DIGITAL AUDIO OUT
Connect to an external digital audio device.
USB
Port for Digital Media Player .
LAN
Connect an ethernet cable to access a network or the Internet.
NOTE
FOR ILLUSTRATION ONLY.
Some external devices impossible insert to this set for individual difference. Please replace with appropriate external signal
cable or increase the adapter to match with the port in such case.
Getting Started
NOTES
Check the jacks for position and type before making any connections. Loose connections can result in image or color
problems. Make sure that all connections are tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to the user’s manual of your A/V device for compatibility
and connections procedure.
Always unplug the power cord when connecting external equipment.
Connecting an antenna, cable or cable/satellite box
1. Turn off the TV before connecting the antenna.
2. Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna, cable or cable/satellite box. If you are
using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your
TV. Likewise, if you are using several antennas, you may need a combiner (not provided).
3. Connect the other end of the cable to the ANT/CABLE IN jack on the side of your TV.
TV JACK
EXTERNAL DEVICES
Cable
ANT OUT
or
ANT/CABLE IN
VHF/UHF Antenna
Connecting an A/V Device with Composite Cable
1. Use the audio and video cables to connect the external A/V device’s composite video/audio jacks to the TV’s jacks. (Video =
yellow, Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
TV JACK
EXTERNAL DEVICES
VIDEO
VIDEO
VCR
Red(R)
DVD Player/Recorder
Red(R)
White(L)
AV Cable
(not included)
White(L)
Video
Camera
Yellow(Video)
Yellow(Video)
Set-top box
Video
A/V OUT
Satellite Receiver
Equipment with A/V jacks
10
Satellite
antenna
cable
Getting Started
Connecting an A/V Device with Component (YPBPR) Cable
1. Use a component cable to connect the external A/V device’s component output jacks to the TV’s YPBPR jacks. Use an audio
cable to connect the external A/V device’s component audio jacks to the TV’s AUDIO (L/R) jacks.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
TV JACK
EXTERNAL DEVICES
PB
PR
COMP
VCR
Audio Cable
(not included)
Red(R)
PR
Red(R)
White(L)
White(L)
PR/CR
PB
Component Cable
(not included)
DVD Player/Recorder
Video
Camera
PR
PB/CB
Set-top box
Satellite
antenna
cable
PB
Satellite Receiver
Component
Equipment with A/V jacks
Connecting an A/V Device with HDMI Cable
Support digital connections between HDMI - enabled AV devices such as PVR, DVD, Blu-Ray, AV receiver and digital
devices.
Some devices such as PVR or DVD player require HDMI signal to be set to output in the device's settings.
Please consult your device user manual for instructions.
1. Use an HDMI cable to connect the A/V device’s HDMI output jack to the TV’s HDMI jack.
2. Plug the connected devices into the mains socket before switching on the TV .
3. Select the corresponding source from the TV.
EXTERNAL DEVICES
HDMI
HDMI
TV JACK
DVD
Set-top Box
NOTE
The HDMI connector provides both video and audio signals, it’s not necessary to connect an audio cable.
Connecting a headphone
TV JACK
Headphones or an analog sound bar can be connected to
the HEADPHONE output on your set. (While the headphone
is connected, the sound from the built-in speakers will be
disabled.)
HEADPHONE
11
EXTERNAL DEVICES
Getting Started
Connecting a PC with VGA Cable
1. Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio
output jack to TV’s PC/DVI AUDIO IN jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
EXTERNAL DEVICES
PC/DVI
AUDIO IN
PC IN
VGA
TV JACK
Computer
NOTES
Primarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the manufacturer of the
PC Video/Graphic's card for further support. Perfect compatibility is not guaranteed.
The VGA cable will not supplied with the product.
We strongly recommend to use VGA cable with 2 ferrite cores as shown in the figure.
Connecting an Audio Receiver with Digital Audio out cable
1. Use a coaxial cable to connect the A/V device’s digital audio in jack to the TV’s DIGITAL AUDIO OUT jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
EXTERNAL DEVICES
TV JACKS
DIGITAL AUDIO OUT
% % 
Powerless
Bass Speaker
Speaker
NOTES
When a digital audio system is connected to the DIGITAL AUDIO OUT (COAXIAL) jack, decrease the volume of both the TV
and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
When the receiver (home theater) is set to on, you can hear sound output from the TV’s digital audio out jack. When the TV
is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is connected to the
TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the
digital audio out jack from your DVD/Blu-ray player/cable box/STB satellite receiver directly to an amplifier or home theater.
Connecting an ethernet cable to access a network or the Internet
Connect an ethernet cable to access a network or the Internet. TV also features wireless connectivity. For more information,
see “Network Connection”.
12
Basic Features
Turning the TV on or off
Choose your Picture Mode
IMPORTANT: At first, you have to match the remote
control with TV.
To turn your TV on or off (standby mode):
1. Plug the power cord into an AC power outlet.
2. Press [POWER] button or use the Tap Pad located on the
TV (see “viewing the control panel”). Your TV turns on.
3. Press [POWER] button again to turn off your TV. When
you turn off your TV, it goes into standby mode.
Home mode
Retail mode
Back
Select
Next
EXIT Exit
If you selected Retail Mode, Energy Saving is not
realized.
5. Press [ ] to select your Tuner Mode: Antenna or
Cable, press [ENTER] button to confirm.
WARNING
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the power
cord.
Please connect cable or antenna
Channel Installation
NOTE
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.
Status: Scanning...
ATV Program Installed: 3
DTV Program Installed: 2
8%
Turning the TV On for the First Time
EXIT Cancel
The Setup Wizard menu appears the first time you turn
on the TV. It will assist you to specify the menu language,
Picture Mode, Tuner Mode and Channel Installation.
6. Press [ ] to set the Channel Installation: Scan or Skip
Scan, press [ENTER] button to confirm.
If you select “Scan”, your TV automatically starts Channel
Installation available in your viewing area.
If you select “Skip Scan”, your TV does not scan for
channels.
Depending on the reception condition, it may take up to
25 minutes or more to complete memorizing channels.
Please allow the process to complete without interruption.
IMPORTANT: Make sure that the antenna or cable is
connected and a wired or wireless Internet connection is
available.
1. Make sure that you have:
Installed the remote control batteries.
Connected an antenna or cable.
Connected the power cord.
Selecting the Input Source
Matched the remote control with TV.
The first time you turn on your TV, you
must select the TV signal source. Your
TV stores this information, so you do not
need to change the TV signal source
unless it changes. For example, you
change from an outside antenna to cable
TV.
To select the video input source:
1. Turn on your TV, then press [INPUT]
button on the remote or on the TV. The
Input Source menu opens.
2. Press [POWER ] button to turn on your TV. The Setup
Wizard menu displays.
3. Press [ / / ] to select your menu language: English,
Spanish or French, press [ENTER] button to confirm.
Choose your menu Language
English
EspaĂąol
Français
INPUT
TV
AV
Component
VGA
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Hi-DMP
Select
OK Enter
EXIT Exit
Select
Next
2. Press [ ] button to highlight the
input source, then press [ENTER]
button.
EXIT Exit
4. Press [ ] to select your Picture Mode: Home Mode or
Retail Mode, press [ENTER] button to confirm.
3. Press [POWER] button again to turn off your TV. When
you turn off your TV, it goes into standby mode.
If you select Retail Mode, a message appears “Are you
sure you want retail mode?” Select “Yes” to continue, or
select “No” to change your selection.
13
Basic Features
Changing Channels / Volume
DISPLAY - Display the information banner. The information
including channel number, channel name, current system
time, tuner mode, audio stream, video format, audio
language, closed caption mode, parental locks rated,
program details, etc.
1. Press the [CH /V] (or [CH +/-]) on the TV/remote control
to change the channel.
2. Press the [VOL /V] (or [VOL +/-]) on the TV/remote
control to adjust the volume.
3. Press the numeric buttons on the remote control to
display the corresponding channels.
GUIDE - Open the DTV program guide. The program guide
information is provided by the broadcasting company.
FAV - Display your Favorite List. You can add or delete
channels to create your favorite list.
Cursor up/down: Press [
option.
Changing the channels can also be achieved by directly
entering the channel number using the numeric keys on
the remote control. If you are entering a two or three digit
channel number, the time between key presses should be
less than 3 seconds.
NOTE
] button to select the
Add/Erase: Press [YELLOW] button to add or delete the
channel from Favorite List.
Page up/down: Press [RED/GREEN] button to page up
or down.
VUDU - VUDUTM is an on-demand, pay-per-view, service
that offers high-definition movies via the Web. You can
access the VUDU service by pressing this button.
Hi-Smart - Press to open the Hi-Smart Hub. The Hi-Smart
Hub provides convenient access to Services and Apps
which let you watch movies, TV shows, listen to music, and
much more.
Shortcuts Instructions
Aspect - Select the screen aspect ratio from Normal, Wide,
Zoom and Cinema.
NETFLIX - Press to open the Netflix interface. Netflix is an
online DVD and Blu-ray Disc rental service, offering instant
access to movies and TV shows to Netflix members. Netflix
unlimited membership required (subscription not included).
Normal: The original 4:3 aspect
ratio (1.33:1 signal) is preserved,
so black bars are added to the left
and right of the image. Standard TV
broadcasts are displayed with a 4:3
aspect ratio.
Wide: When watching a standard
broadcast or full-frame movie in
this mode, the display image is
stretched proportionately to fill
the TV screen. When watching a
widescreen (1.78:1 signal) program
or movie, the display image fills the
TV screen.
Zoom: Stretch the 4:3 aspect ratio
image vertically and horizontally to
fill the screen at 1:1.78 aspect ratio.
Cinema: Stretch the 4:3 aspect ratio
image vertically and horizontally to
fill the screen at 1:2.35 aspect ratio.
14
Basic Features
To Use the Menu
1 Press the [Menu] button to open the main menu.
2 *
< ] to select a menu option, then press
Picture
3 In each menu, you can:
< ] to select an item,
*
Standard
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
[ /ENTER] to enter the menu.
Press [ / ] to adjust the value, or
50
50
50
10
Adjust image to suit
personal preferences.
Press [ /ENTER] to enter the submenu,
Press [RETURN] to exit the submenu.
OK
4 Press [EXIT] button to exit the menu.
Enter
Select
Exit
NOTE
FOR ILLUSTRATION ONLY.
Using the Picture Menu
Color Temperature: Change the color temperature. You
can select a preset color temperature: Cool, Standard
and Warm.
You can adjust:
Noise Reduction: Optimize the picture quality by filtering
signal interference. You can select Off, Low, Medium or
High.
Picture Mode - Adjust the Picture Mode. You can select
Standard, Theater, Energy Saving, Game, Custom or Vivid.
Brightness - Increase or decrease the brightness of the
picture. Increasing the brightness can add more light to dark
areas of the picture, while decreasing the brightness can
add more darkness to light areas of the picture.
Adaptive Contrast: Automatically adjusts the contrast
level of the selected input source.
Using the Audio Menu
Contrast - Increase or decrease the contrast of the picture.
Increase the contrast to adjust the white areas of the picture
or decrease the contrast to adjust the black areas of the
picture.
Audio
Standard
Sound Mode
Balance
Equalizer
Bass Boost
Sound Surround
Digital Audio Output
Auto Volume Control
Color - Adjust the level of color in the picture.
Tint - Adjust flesh tones so they appear natural.
Sharpness - You can increase the sharpness level for
clearer images or decrease the sharpness level for smoother
images.
Advanced Video - Access advanced video settings such as
Color Temperature, Noise Reduction and Adaptive Contrast.
Off
PCM
Off
Select
Select a Sound mode
to achieve ideal sound.
Back
You can adjust:
Sound Mode - Select the Sound Mode: Standard, Speech,
User or Music.
Picture
Standard
Medium
Off
Color Temperature
Noise Reduction
Adaptive Contrast
Balance - Adjust the volume of the left and right speakers.
Equalizer - Soften or enhance the sound at specific
frequency points.
Adjust advanced video
features DNR.
Select
Back
15
Basic Features
Using the Channels Menu
Audio
10DB
Channels
-10DB
120Hz 500Hz 1.5KHz 5KHz 10KHz
Adjust
Select
Antenna
Tuner Mode
Auto Channel Search
Channel Skip
Favorite List
MTS
Audio Language
0DB
Stereo
English
Select tuner connect
mode.
Back
Bass Boost - Adjust the bass performance.
Select
Sound Surround - Simulates surround sound and enhances
bass response.
Back
You can adjust:
Digital Audio Output - Send digital audio to an external
audio system. You can select PCM, RAW or Off.
Tuner Mode - Select TV source: Antenna or Cable.
Auto Channels Search - Scans for channels that have
signals and stores the channels information in the channel
list.
PCM: PCM outputs two channel audio regardless of the
input format.
RAW: Passes through (output = input) the incoming audio
signal without decoding. E.g. incoming Dolby Digital, DTS
or PCM data stream is simply output as it is without any
processing.
Auto Scan
Status: Scanning...
Analog Channels: 0
Digital Channels: 0
Auto Volume Control - Automatically adjusts volume to a
consistent level; attenuates loud passages.
Antenna
8%
Cancel
Using the Screen Menu
Channel Skip - You can cancel a channel stored in the
channel list.
NOTE
NOTE
Only available in VGA mode.
When you press [CH / V] button, your TV skips
the channel you cancelled. You can still tune to the
channel using the number buttons on the remote
control.
Screen
H.Position
V.Position
Phase
Clock
Auto Adjust
39
30
23
127
Favorite List - Add or delete channels to create a favorite
list. You can press [FAV] button to display your Favorite List.
Image positioning
and PC settings.
MTS - Select the default audio stream: Mono, Stereo or
SAP.
OK
Enter
Select
Audio Language - Select the audio language: English,
Espaùol or Français.
Exit
You can adjust:
NOTE
H.Position - Move the image right or left.
Only available in TV mode.
V.Position - Move the image up or down.
Phase - Adjust the focus of stable images.
Clock - Adjust the sample frequency.
Auto Adjust - Detects input signal clock, phase and position
and adjusts TV display accordingly.
16
Basic Features
Using the Settings Menu
Sleep Timer: Specify the amount of time before your TV
automatically turns off: Off -10-...-120 minutes.
Caption - Adjust Closed Captioning settings.
Settings
Caption Control: Select the Closed Caption mode: CC
Off, CC On or CC On When Mute.
English
Language
Menu Settings
Time Setup
Caption
Network
Demo Mode
Version Info
Reset Default
Analog Closed Caption: Select an Analog Caption
setting:
Adjust OSD language.
Select
CC1~CC4: Closed captioning appears in a small
banner across the bottom of the screen. CC1 is usually
the “printed” version of the audio. CC2~CC4 display
content are provided by the broadcaster.
Back
Text1~Text4: Closed captioning that covers half or
all of the screen. Text1~Text4 display content are
provided by the broadcaster.
You can adjust:
Language - You can select the menu’s language to English,
Espaùol or Français.
Off: To turn off the Analog Caption.
Menu Settings - You can set On-screen menu system.
Digital Closed Caption: Select a Digital Caption setting:
Service1~Service6 or Off.
Timeout: Select the display time of the menu: 10-20-...60 seconds.
Digital Caption Style: Customize the look of digital
Closed Captioning.
Time Setup - Set the time zone, daylight saving, time and
sleep timer.
Settings
Time Zone: Select your local time zone: Eastern Time,
Indiana, Central Time, Mountain Time, Arizona, Pacific
Time, Alaska or Hawaii.
Custom
Large
Style 1
White
Solid
Black
Solid
Black
Caption Style
Font Size
Font Style
Font Color
Font Opacity
Background Color
Background Opacity
Window Color
Daylight Saving: Set the Daylight Saving time for your
area.
Time: You can set time manually or select automatic if
the TV is connected to an antenna or cable source.
Select
Settings
On
2012/01/01
01:01 PM
Off
12:00 AM
Off
12:00 AM
Auto Synchronization
Date
Time
Power On Timer
Time
Power Off Time
Time
Select
Clock, date and timers
settings.
Back
Caption Style: Set the look of Digital CC. “As
Broadcaster” uses broadcaster’s style.
Obtain date and time
from broadcaster.
Font Size/Style/Color/Opacity: Select the size/style/
color/opacity level of font.
Background Color/Opacity: Select the color/opacity
level of the background.
Back
Window Color: Select the color of the window.
Network - You can setup the network configuration in this
menu. For more information, see “Network Connection” and
“Network Setup”.
Auto Synchronization: Select “On” for automatic
date and time setting using information from broadcast
stations in your area.
Demo Mode - Displays a banner at the bottom of the screen
which describes the key features of the TV.
Date/Time: Set the current year/month/day/time.
Power On Timer: When “On”, you can set the time
when the TV turns on automatically.
Version Info - Display the software version information.
You may need to reference this information when contacting
Customer Care or upgrading the firmware online.
Time: Set the desired time for the TV to turn on
automatically.
Reset Default - Restores the TV configuration to factory
settings. You will need to complete the setup for such things
as Tuner/Channel settings, Network connection, Date/Time
and other user preferences.
Power Off Timer: When “On”, you can set the time
when the TV turns off automatically.
Time: Set the desired time for the TV to turn off
automatically.
17
Basic Features
Using the Lock Menu
U.S. TV Ratings
When you first use this function, the default password is
[0000]. Once you input this password, you can set options.
Lock
Channel Block
Program Block
Input Block
Change Password
Clean All
Prevent access to TV
services.
Age
Defined as
TV-Y
All children
TV-Y7
Directed to older children
TV-G
General audience
TV-PG
Parental Guidance suggested
TV-14
Parents Strongly cautioned
TV-MA
Mature Audience only
Contents
OK
Enter
Select
Back
You can adjust:
Channel Block - Block selected Channels on the TV.
Program Block - Block selected Programs on the TV.
Rating Enable: Block or unblock TV ratings.
U.S. TV Ratings: Restrict TV programs by USA Ratings.
All of the ratings below that rating set blocked
automatically
Suggestive dialogue
Strong language
Sexual situations
Violence
FV
U.S. Movie Ratings: Restrict movie by USA Ratings.
Canadian English/French Ratings: Restrict movie and
TV programs by Canadian Ratings.
Defined as
Fantasy Violence
Canadian English Ratings
Open V-Chip: Display an advanced V-Chip ratings table
for digital channels (USA only).
Rating
Block Unrated: Block unrated TV programs.
C8+
Input Block - Block selected Input source on the TV.
Change Password - If you want to change the default
password, first enter the new password then enter the same
password again.
Description
Children
Children 8 years and older
General Programming, suitable for all audiences
PG
Parents Guidance
14+
Viewers 14 years and older
18+
Adult Programming
Clean All - You can reset all locks to factory mode.
Following is the description of these ratings.
Canadian French Ratings
U.S. Movie Ratings
Rating
PG
PG-13
NC-17
Rating
Defined as
General audience
Parental Guidance suggested
Parents strongly cautioned
Adult audience only
18
General
8 ans+
8+General; Not recommended for young
children
13 ans+
Programming may not be suitable for children
under the age of 13
16 ans+
Programming is not be suitable for children
under the age of 16
18 ans+
Programming restricted to adults
Restricted
No one 17 and under admitted
Description
Advanced Features
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) with a Ethernet or wireless
connection.
Connecting to a Wired Network
You can attach your TV to your LAN by one of the three following ways:
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 LAN cable. See the diagram below.
The Modem Port on the Wall
LAN Port on TV
External Modem
(ADSL / VDSL / Cable TV)
LAN
Modem Cable
LAN Cable
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is
connected to an external modem. Use LAN cable for the connection. See the diagram below.
The Modem Port on the Wall
External Modem
IP Sharer (Router)
(ADSL / VDSL / Cable TV) (with DHCP server)
LAN Port on TV
LAN
Modem Cable
LAN Cable
LAN Cable
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet with a Cat 5 cable. See the diagram below. Note that the wall
outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall
LAN Port on TV
LAN
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS, so you don’t have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
NOTE
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support
DHCP also let you use Static IP addresses.
19
Advanced Features
directions to enable automatic IP addressing by DHCP.
Or, follow the steps listed to the follow to manually
configure the network connection.
Network Setup (Auto)
Use the Automatic Network Setup while your connecting the
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:
How to set up automatically
Network Setup (Manual)
1. Connect your TV to your LAN as described in the
previous section.
Use the Automatic Network Setup when connecting your TV
to a network that requires a Static IP address.
Getting the Network Connection Values
2. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
To get the network connection values on most windows
computers, follow these steps:
Settings
OK
Enter
1. Right click the Network icon on the bottom right of the
screen.
English
Language
Menu Settings
Time Setup
Caption
Network
Demo Mode
Version Info
Reset Default
2. In the pop-up menu that appears, click Status.
Initiate network
connection
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The network
connection values are displayed.
Select
How to set up manually
Exit
To set up your TV’s network connection manually, follow
these steps:
3. On the Network screen, select Configuration and press
[ENTER] button to enter the submenu.
1. Follow Steps 1 through 5 in the “How to set up
automatically” procedure.
Settings
2. Set Address Type to Manual.
On
Ethernet
Internet Connection
Interface
Wireless Setting
Information
IP Setting
Connection Test
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Select connection type
Select
0.
0.
0.
0.
0.
Manual
0. 0.
0. 0.
0. 0.
0. 0.
0. 0.
Back
4. Set Internet Connection to On and Interface to Ethernet.
Select
Back
5. Select IP Setting and press [ENTER] button to enter it.
3. *
<>\     ^* %
  
<_`\
button to move the cursor to the entry field. Then press
0~9 buttons to enter the numbers.
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto
176. 16. 0.
255. 255. 255.
172. 16. 0.
172. 16. 2.
0. 0. 0.
255
4. *
<{|}\    ^* %
  
<>\
button to select the next options to enter the numbers.
5 When done, press [MENU] button to return to the
previous menu.
6. Select Connection Test to check the internet connectivity.
Select
Back
6. Set Address Type to Auto.
7. Auto acquires and enters the necessary connection
values automatically.
8. If the connection values are not automatically entered,
please check your modem and router manuals for
20
Advanced Features
Connecting to a Wireless Network
To connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below.
Wireless IP Sharer(Router) The LAN Port on
(with DHCP Server)
the Wall
Wireless LAN Adapter
built-in TV set
LAN Cable
Hisense’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Hisense recommends using
IEEE 802.11n router. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly.
NOTES
You must use the Hisense’s built-in Wireless LAN Adapter to use a wireless network, the set doesn’t support external USB
network adapter.
To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your
TV can use a DHCP or static IP address to connect to the wireless network.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is
currently being used by another device nearby, this will result in interference and communication failure.
If you apply a security system other than the systems listed below, it will not work with the TV.
If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIPAES (WPS2 Mixed) for your Access Point (AP), Hisense TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or
PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
Connection Methods: You can setup the wireless network connection three ways.
-Scan
-Manual
-Auto
21
Advanced Features
(push button configuration) setup. Choose the method
supported by your wireless access point.
Wireless Setting
How to set up
8a. If you choose PIN, an identification number will appear
on the screen for you to enter into the access point. After
    *^ 
 <`\  „ ^  *^   
by another device, select [REFRESH] to obtain a new
PIN and enter it into the access point. After entering the
*^ 
 <`\  „
1. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
Settings
English
Language
Menu Settings
Time Setup
Caption
Network
Demo Mode
Version Info
Reset Default
OK
Enter
8b. If you choose PBC, a screen will appear prompting to

<`\  „ %  
   <`\    † €
minutes to locate and press the Push Button on your
access point to connect to the TV.
Initiate network
connection
9. Press the [MENU] key to return to the previous menu.
Select
10. Select Connection Test to check the Internet connectivity.
Exit
2. On the Network screen, select Configuration and press
[ENTER] button to enter the submenu.
DLNA Settings
Computer, TV and other digital devices can be connected
via DLNA and they can share files with each other. You
can use the TV set as a DLNA DMP (Digital Media Player)
device to enjoy movies, pictures, music and other multimedia
materials in your computer through DLNA connection.
Settings
On
Wireless
Internet Connection
Interface
Wireless Setting
Information
IP Setting
Connection Test
Setup wireless
connection.
DLNA Setting needs to be set on TV and computer
Respectively.
Network Setup:
OK
Enter
Select
Exit
1. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
3. Set Internet Connection to On and Interface to Wireless.
2. On the Network screen, select Configuration and press
[ENTER] button to enter the submenu.
4. Select Wireless Setting and press [ENTER] button to
enter it.
3. Set Internet Connection to On and Interface to Ethernet.
You can select: Scan\Manual\Auto.
4. Select IP Setting and press [ENTER] button to enter it.
5. If you select Scan, a screen will appear listing all of the
€ 
€ €     ‚!„ }  <>\
keys to select the wireless network with your router
SSID and press [ENTER] to confirm. Proceed to Step 7.
5. Set Address Type to Auto.
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
6. If you select Manual, a screen will appear prompting
you to enter the SSID of your wireless network. Press
[ENTER] and an on-screen keyboard will pop up. Enter
the SSID and select OK. Press [ENTER] to confirm and
a screen will appear prompting you select the security
   € 
€„ }
 <>\  
to select the proper security mode and press [ENTER]
to confirm. If you selected None for the security mode,
proceed to step 9.
Auto
176. 16. 0.
255. 255. 255.
172. 16. 0.
172. 16. 2.
0. 0. 0.
Select
255
Back
6. Auto acquires and enters the necessary connection
values automatically.
7. A screen will appear prompting you to enter the
password for the selected security mode. Press [ENTER]
and an on-screen keyboard will pop up. Enter the
password and select OK. Press [ENTER] to confirm.
Proceed to Step 9.
7. If the connection values are not automatically entered,
please check your modem and router manuals for
directions to enable automatic IP addressing by DHCP.
Or, follow the steps below to manually configure the
network connection.
8. If you select Auto, a screen will appear prompting you to
select PIN (personal identification number) or PBC
22
Advanced Features
To set up your TV’s network connection manually,
follow these steps:
1). Follow Steps 1 through 5 in the “How to set up
automatically” procedure.
2). Set Address Type to Manual.
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
0.
0.
0.
0.
0.
Select
Manual
0. 0.
0. 0.
0. 0.
0. 0.
0. 0.
3. The “Add To Library” will pop up on the screen. Click
“Add”.
Back
8. Set Address Type to Manual, enter IP Setting. Then

<>\     ^* %
  
<_`\
button to move the cursor to the entry field. Then press
0~9 buttons to enter the numbers.
9. *
<{|}\    ^* %
  
<>\
button to select the next options to enter the numbers.
10. When done, press [MENU] to return to the previous
menu.
4. Select a folder and click OK button.
11. Select Connection Test to check the Internet connectivity.
Set DLNA to On:
1. On the Network screen, select Applications and press
[ENTER] button to enter the submenu.
2. *
<_`\  
 ‡$%  # „
Settings
On
DLNA
Netflix
VUDU
Set DLNA on or off
5. Click “Close” to close the dialog.
Select
Back
Media Share Settings in Computer
If your computer does not support DLNA, you may install
software that supports DLNA such as TVersity or Windows
Media Player. We recommend Windows Media Player as the
installation and setup is easier.
1. Start the Windows Media Player(V11 or higher).
2. Click “Library” and then “Add to Library...”.
Settings to Share Files
1. Click “Library” and move the cursor to select “Media
Sharing...”
23
Advanced Features
Network Function
NOTICE FOR USE
1.
2.
2. Click the box to select “Share my media” and click [OK].
3.
4.
3. An equipment icon will appear on the white area if
the DLNA Settings has been correctly set. Select the
appropriate icon and then click “Allow”.
5.
6.
4. The TV now has access to the shared files on the
computer.
24
If you use VUDU services, see the following note before
using it.
Use of Internet services requires a working broadband
Internet connection (1 to 2 Mbps for SD video, 2.25 to 4.5
Mbps for HD video and 4.5 to 9 Mbps for HDX video).
VUDU and other Internet-based services are not provided
by Hisense, may change or be discontinued at any
time and may be subject to restrictions imposed by
your Internet service provider. The quality, functionality,
or availability of such services may be affected by the
capacity of your Internet connection. Use of VUDU videoon-demand and other Internet services may require the
creation of a separate account through a computer with
internet access.
Certain VUDU services may not be available for this TV
model.
VUDU video-on-demand and other Internet services may
require payment of one-time and/or recurring charges.
You are solely responsible for any charges incurred as a
result of using Internet-based content, including, without
limitation, communications charges for the provision of
Internet or network services and any charges incurred
for third-party Internet content services, such as video on
demand or subscription services. All third-party services
are provided in accordance with whatever terms and
conditions are established between such third-party
providers and you.
H I S E N S E M A K E S N O R E P R E S E N TAT I O N S O R
WARRANTIES ABOUT THE CONTENT, AVAILABILITY
OR FUNCTIONALITY OF THE VUDU SERVICE OR
O T H E R I N T E R N E T D E L I V E R E D T H I R D - PA RT Y
SERVICES AND DOES NOT WARRANT THAT ANY
OF THEM WILL BE UNINTERRUPTED, ERROR FREE
OR SATISFACTORY. ANY IMPLIED WARRANTY,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OF ANY THIRD PARTY
CONTENT OR SERVICE, IS EXPRESSLY EXCLUDED
AND DISCLAIMED. UNDER NO CIRCUMSTANCES
WILL HISENSE BE LIABLE IN CONTRACT, TORT OR
UNDER ANY OTHER THEORY FOR ANY DAMAGES
ARISING OUT OF OR IN CONNECTION WITH YOUR
USE OF ANY CONTENT OR SERVICE PROVIDED
BY ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Advanced Features
Enter the Network Applications
Operational buttons
1. Press the [Hi-Smart] button to display network main
menu.
2. *
<>_`\  
      
want to view and press [ENTER] to enter the following
description.
No
Buttons Description
Interface description
The current signal
The Hisense advertisement
Hisense market
Network options
Source options
Press to launch Vudu Movies App directly.
VUDU HD Movies
Opens the Hi-Smart Hub with links to various
Internet Services.
Brief introduction
Press to launch Netflix App directly.
VUDU is an on-demand service that offers high-definition
movies on Web.
For enjoying more movies, please register and log in to
your account.
>_` Selects the on-screen menu items.
ENTER Confirms selections.
EXIT
Closes the menu.
Operation instructions
RETURN Returns to the previous menu.
You can access the VUDU HD Movies by the following
method:
Stops playback and displays the movie title
screen.
1. Press the [Hi-Smart] button to display network main
menu.
Pauses playback. Press the button to return to
playback.
Displays the TrickPlay screen and fast forwards
playback.
2. *
<>_`\      !}‡} ‡ {†
icon and press [ENTER] to enter it (Refer to “Enter the
network application”), or press [VUDU] button to enter
directly.
Displays the TrickPlay screen and fast reverses
playback.
3. Select the Sign Up Now icon on the VUDU HD Movies
interface, and press [ENTER] to enter.
Plays the next video.
Plays the previous video.
25
Advanced Features
4. Please read the content of the Disclaimer first. If agree,
2. Press [ENTER] button to display the keyboard.
There are some shortcuts on the bottom of the keyboard
so that you can input part of the address often used
directly.
Other keys are used as the keyboard of your computer.
Press [GREEN] button and then access the network main
menu. If disagree, press [RED] button or [YELLOW]
button to cancel or exit Disclaimer menu, then network
cannot be used.
Enter email address
Enter email address to begin enjoying VUDU!
Enter email address
a b c d e f g h i j k l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 @ .com
Symbols
Space
Shift
Back
Done
3. *
<>_`\   †     
characters you want to select and then press [ENTER]
button to confirm.
If you want to delete one character, move the cursor to
Back key
and press [ENTER] button to confirm.
4. Move the cursor to Done key and press [ENTER] button
to confirm if you have completed the address input. Then
the new address will appear on the address bar.
5. Enter your email address to start your VUDU experience.
( Refer to “How to Input the Email Address” )
NOTE
6. *
<>_`\   †    
 
service items in the VUDU HD Movies home page, and
press [ENTER] button to confirm.
TV screen may be difference with picture.
VUDU HD Movies home page
7. In the process of watching a movie, press [ENTER] button
       
<_`\    
the function icon, and press [ENTER] button to confirm.
8. Press [RETURN] button to return the upper menu, or
press [EXIT] button to close the menu.
Tool Bar
Chapters
0:00:34
1. *
<|‚|ˆ\  
select the chapter.
    
0:02:32
<_`\  
Press
for help
2. Stop playback.
Title
New
Top Picks
Top Rentals
New Trailers
Coming Soon
Browse
Collections
My VUDU
Search
3. Fast backward. Press [ENTER] button to select the
backward speed. You can press [ ] button to achieve
the function.
4. ** „ ‰  
<`^^\   
directly when there is no control bar on the screen.
5. Fast forward. Press [ENTER] button to select the forward
speed. You can press [ ] button to achieve the function.
6. Progress bar. The progress bar when playing.
How to Input the Email Address
1. *
<>_`\   †     
address bar and press [ENTER] button to confirm.
26
Function
The latest movies
Mostly picked up movies
Mostly rented movies
Latest trailers
The movies can be picked soon
Browse all the movies in VUDU
Browse the classified movies
The movies user bought or rented
Search movies in VUDU
Advanced Features
VUDU HD Movies subpage
1. Press the [Hi-Smart] button to display network main
menu.
2. *
<_`>\      !}‡} % 
and press [ENTER] to enter it.
3. *
<_`>\      €   €  
access, and press [ENTER] to enter it.
4. You can press [RETURN] to return the upper menu or
press [EXIT] button to close the Widgets display.
VUDU Apps home page
Title
Rent/Own
Watch Trailer
2 Minute
Preview
Add to Wishlist
Rate/share
Overview
Cast&Crew
Reviews
Similar
More Info
Function
To rent or buy current movie
To watch trailer of the current movie
To preview current movie for 2
minutes
Add current movie to your wishlist
To rate current movie or share it to
your friends in Facebook or Twitter
The overview of current movie
The cast and crew of current movies
and find their related movies
The reviews of current movie
The similar types of movies
The detail information of current movie
MY FAVORITES
MOST POPULAR
NEWEST
BROWSE BY GENRE
SHOW TICKER
INFO&SETTINGS
Title
My favorites
Most popular
Newest
Browse by
genre
VUDU Apps
Function
The user’s favorite applications
The most popular applications
The newest applications in VUDU
Browse applications by genre
Show Ticker
Show the applications at the bottom of
screen while watching TV
Info&settings
VUDU Apps system information
Brief introduction
Netflix
The applications platform for connected TVs.
VUDU Apps provides customers with access to a wide
range of Internet services and applications including
streaming video, music on demand, photo browsing,
social networking and more.
 
   
Brief introduction
Instantly watch thousands of TV episodes & movies
streaming over the Internet from Netflix. Unlimited
membership required.
VUDU Apps supports the development of responsive
apps designed specifically for use on home HD
televisions.
NOTES
VUDU Apps uses a unique, cloud-based architecture
optimized for consumer electronics devices, including
delivering the latest applications to consumers without
the need for software downloads or frequent firmware
updates.
TV screen may be difference with picture.
For more information on Netflix visit http://www.netflix.
com/help or login to your Netflix account and click “Help”
at the top of the page.
Devices featuring VUDU Apps* will begin shipping to
consumers since the first quarter of this year.
Your broadband fluency and picture quality depend on
the network speed and original bit rate.
VUDU Apps** allows you to see app updates while
watching live television.
Illustrations are examples and may differ from the actual
Netflix screens. The display and operations may change
as a result of a software update. Use Netflix without
configuring a proxy server. Part or all of Netflix may not
be available when connecting to the Internet via a proxy
server.
Operation instructions
You can access the VUDU Apps by the following
methods:
27
Advanced Features
Opera
Operation instructions
1. Press the [Hi-Smart] button to display network main
menu.
The function of the buttons on the remote
control
2. *
<_`>\          
press [ENTER] to enter it, or press [NETFLIX] button to
enter Netflix website directly.
Buttons Description
3. Input Email and Password in following window to sign in. (
Refer to “How to Input the Email Address” )
>_`
Press these buttons to move the cursor on the
screen as the mouse of the computer.
MENU
Press the button to display/cancel the keyboard
on the screen.
ENTER
Press the button to confirm the selection. Press
the button twice to search the new website.
Operation instructions
How to enter the Opera Browser
The Network setup must be correct. Then you can use
the network.
1. Press the [Hi-Smart] button to display network main
menu.
4. *
<>_`\   †    
 
service items in the Netflix home page, and [ENTER]
button to confirm.
2. *
<_`>\  
press [ENTER] to enter it.
       
5. In the process of watching a movie, press operational
buttons to control the movie.
6. Press [RETURN] button to return the upper menu, or
press [EXIT] button to close the menu.
Netflix Movies home page
3. Then the default interface will appears on the screen.
There are some function icons on the bottom of the
screen:
Title
Suggestions for
you
New Arrivals
Genres
Instant Queue
Search
Function
The movies suggested for you by
Netflix
The new arrivals
Browse movies in different genres
Your list of movies
Search for available titles
Address bar
2 3 4 5 6
The function of the buttons on the screen:
1. Back to main page.
Move the cursor to the icon and press [ENTER] button to
return to the default interface.
2. Back to previous page.
Move the cursor to the icon and press [ENTER] button to
return to the previous viewed web page.
3. Return a page.
Move the cursor to the icon and press [ENTER] button to
go forward to the previous viewed web pages.
28
Advanced Features
4. Refresh page.
Move the cursor to the icon and press [ENTER] button to
refresh the current page.
How to Add a Bookmark
If you want to find the often viewed website from the
favorite folder, you can follow the steps to add it to the
folder.
5. Folder.
Move the cursor to the icon and press [ENTER] button to
enter the favorite folder.
1. Input the address on the address bar and enter it.
2. *
<>_`\   †     
press [ENTER] button to confirm.
The menu will pop up on the screen.
6. Add Folder.
Move the cursor to the icon and press [ENTER] button to
add the website to the favorite folder.
and
Add a bookmark
Are you sure to add it?
7. Address bar.
Input the website you want to view.
8. Sure to enter the Address of the page
Move the cursor to the icon and press [ENTER] button to
search the website.
Name:
HISENSE
URL:
Http://www.hisense.com.au/
Folder:
Root folder
9. Exit Opera.
Move the cursor to the icon and press [ENTER] button to
close the page.
Add
Cancel
How to Input the New Address
CN
ǃ
Tab
Caps L a
Shift
http://
www.
.com
.org
.gov
‘
.net
3. *
<>_`\   †      
marked with dashed box on the right screen. Then press
[ENTER] button to confirm to display all the folders.
Back
Enter
4. *
<>\         €   
the bookmark to. And press [ENTER] button to confirm.
Space
Reset
5. Move the cursor to the Add button and then press [ENTER]
button to confirm.
If you do not want to add the book mark, move the cursor
to the Cancel button and press [ENTER] button to confirm.
1. *
<>_` \   †     
address bar and press [ENTER] button to confirm.
2. Press [MENU] to display the keyboard.
There are some shortcuts on the bottom of the keyboard
so that you can input part of the address often used
directly.
Other keys are used as the keyboard of your
Add a bookmark
Are you sure to add it?
3. *
<>_`\   †     
characters you want to select and then press [ENTER]
button to confirm.
If you want to delete one character, move the cursor to
Back key and press [ENTER] button to confirm. Or if you
want to re-enter all the characters, move the cursor to
Reset key and press [ENTER]button to confirm.
Name:
HISENSE
URL:
Http://www.hisense.com.au/
Folder:
Root folder
Root folder
Opera Software
GOGI SDK
Opera technology
How to Add a Folder
4. Move the cursor to Enter key and press [ENTER] button
to confirm if you have completed the address input.
Then the new address will appear on the address bar.
You can add a folder to the favorite as follows:
1. Move the cursor to the
icon and press [ENTER] button
to confirm. The menu will pop up on the screen.
5. Move the cursor to the address bar and press [ENTER]
button twice to enter the website.
Or move the cursor to the
and press [ENTER] button
to search.
2. Move the cursor to Add a folder button and press [ENTER]
button to confirm.
A pop-up menu appears on the screen.
3. Move the cursor to Name bar and press [ENTER] button
to confirm. Follow the steps 2~4 in “How to Input the New
Address” to input the name.
NOTE
There is only recommend to open the English website.
4. Move the cursor to Add button and press [ENTER] button
to confirm and the new folder has been added.
29
Advanced Features
Add a folder
How to select the Website from the favorite folder
Close bookmark manager
icon and press [ENTER] button
1. Move the cursor to the
to confirm. The menu will pop up on the screen.
Opera Software
GOGI SDK
Add a bookmark
Are you sure to add it?
Opera technology
HISENSE
2. Move the cursor to the icon before the folder name and
press [ENTER] button to confirm.
The websites in the folder will appear in the following
lines.
Name:
Add
Cancel
3. Move the cursor to the website you want to view and
press [ENTER] button to confirm.
If the website is in the root folder, you can select it
directly . And do not need operate as step 2.
Http://www.hisense.com.au/
How to Edit/Delete a Folder/Bookmark
icon and press [ENTER] button
1. Move the cursor to the
to confirm. The menu will pop up on the screen.
Add a folder
2. Move the cursor to the folder /bookmark directly and there
will be two icons on the right of it. Move the cursor to one
of the icons and press [ENTER] button to display a popup menu.
Close bookmark manager
Opera Software
GOGI SDK
Opera technology
HISENSE
: Edit button.
1).Move the cursor to the Name/URL bar and press
[ENTER] button to confirm. Follow the steps 2~4 in
“How to Input the New Address” to edit it.
Http://www.hisense.com.au/
How to exit the manager
Add a folder
Close bookmark manager
Move the cursor to the Close bookmark manager icon
and press [ENTER] button to confirm.
Opera Software
GOGI SDK
Opera technology
HISENSE
Edit this bookmark
Are you sure to edit it?
Name: HISENSE
URL: http://www.hisense.com.au/help/warranty
Edit
Cancel
YouTube
Brief introduction
Http://www.hisense.com.au/
Watches the video via YouTube.
2).Move the cursor to Edit button , then press [ENTER] to
confirm and the folder/bookmark will be saved.
Operation introduction
1. Press the [Hi-Smart] button to display network main
menu.
<>_`\      ‰‚   
2. *
press [ENTER] to enter it.
: Delete button.
Move the cursor to the Delete button and press [ENTER]
button to confirm. Then the folder/bookmark will be
deleted from the favorite folder.
Add a folder
Close bookmark manager
Opera Software
GOGI SDK
Opera technology
HISENSE
Delete this bookmark
Are you sure to delete it?
Name: HISENSE
URL: http://www.hisense.com.au/help/warranty
Delete
Cancel
Http://www.hisense.com.au/
NOTE
There is only Name bar on the pop-up menu for folder.
30
Advanced Features
Other Apps
Operation introduction
1. Press the [Hi-Smart] button to display network main
menu.
2. *
<>_`\  
press [ENTER] to enter it.
Navy Bat...
Tetris
Penalty
dress-up
Penalty
DICE
GUESS NU
   #  %  
DICE
2) *
<>_`\     
install and press [ENTER] to confirm.
GUESS NU
Function
Your local applications
The applications of the latest online
Applications classification to download
The pop ranking applications
Delete the local applications
View the service information
Title
My Apps.
New Arrival
More Apps.
Hotlist
Management
SelfService
dress-up
 €  
3) Press [ENTER] to install the applications or press
[RETURN] to return to the new arrival home page.
If installed, the application will be shown in My Apps
interface.
3. Follow the steps as following.
4) Press [RETURN] to return to the title.
My Apps:
More Apps:
Display the applications of downloaded and installed on
the local.
1) *
<_`\       { %   
ENTER] to enter it.
Classify the applications by story, knowledge and funny
game.
<>
1) *
<_`\       { %   
ENTER] to enter it.
<>
STORY
Navy Bat...
Tetris
Penalty
dress-up
DICE
GUESS NU
KNOWLEDGE
FUNNY GAME
Page 1/2
2) *
<>_`\     
enter and press [Enter] to confirm.
 €  
2) *
<  > \ 
  
[ENTER] to confirm.
3) Press [RETURN] to return to the title.

3) *
<>_`\     
install and press [ENTER] to confirm.
New Arrival:
1) *
<_`\        € %†   
ENTER] to enter it.

<>
  
 €  
4) Press [ENTER] to install the applications or press
[RETURN] to return to the More Apps home page.
31
Advanced Features
If installed, the applications will be shown in My Apps
interface.
SelfService:
*
<_`\       Œ Œ †   
[ENTER] to view the service information.
Hotlist:
1) *
<_`\           
ENTER] to enter it.
<>
Our Promise
Thanks for you and your family choose Hisense Smart TV, we will
continue to provide better and more services.
Penalty 1.0
Hitv Issued In 2012-01-07
Service Information
If your TV meet quality problem, please kindly let us know, we will
Dress-up 1.0
Hitv Issued In 2012-01-07
make every effort to serve you.
Appstore Version
DICE 1.0
Hitv Issued In 2011-12-13
1.0.29.0
Device ID
Guess nu 1.0
861003009000006000000150FE1FC402
Hitv Issued In 2012-01-12
Penalty 1.0
Hitv Issued In 2011-12-13
Page 1/2
2) *
<_`\   €   
<>\   
the applications you want to install and press [ENTER] to
confirm.
Other Information
3) Press [ENTER] to install the applications or press
[RETURN] to return to the Hotlist homepage.
VUDU customer care: To learn more about VUDU, visit
the frequently Asked questions at www.vudu.com/support.
If installed, the applications will be shown in My Apps
interface.
     :
US: (866) 716-0414
Canada: (866) 348-2353
4) Press [RETURN] to return to the title.
Management:
1) *
<_`\       {  
<>|‚|ˆ\    „
   
Penalty 1.0
Valid until:2099-12-31 Size:5.48M
OK Delete
Dress-up 1.1
Valid until:2099-12-31 Size:2.73M
DICE 1.0
Valid until:2099-12-31 Size:5.48M
Guess nu 1.0
Valid until:2099-12-31 Size:5.88M
Penalty 1.0
Valid until:2099-12-31 Size:1.66M
Page 1/2
2) *
<_`\   €   
the applications you want to delete.
<>\ 
 
3) Press [ENTER] to display the menu.
Are you sure?
4) *
<_`\ 
delete.
  ‰
   
<|‚|ˆ\ 
5) Press [RETURN] to return to the title.
32
Advanced Features
Digital Media Play
4. Play the next video. You can press [
] to achieve the
function when no control bar display on the screen.
Please note that Hisense will not assume any responsibility
for any lost data and cannot guarantee perfect compatibility
with all mass storage devices. Be sure to insert the USB
disk or mobile hard disk with standard USB2.0 port.
Press [INPUT] button to display the INPUT menu, press
<>\     ‘‡{*   
[ENTER] button to confirm. (If you want to exit Hi-DMP,
you can press [INPUT] button to switch to other sources).
5. Fast backward. Then press [ENTER] to select the
backward speed. You can press [
] to achieve the
function.
6. Fast forward. Then press [ENTER] to select the forward
speed. You can press [ ] to achieve the function.
7. Select time to play
’“ *
”“ *
<•–—\ 
adjust it.
Press [RED] button to switch the media type.
Press [YELLOW/BLUE] to turn to the previous/next page.
      €  
     
„
<>_`\ 
3) Press [ENTER] to confirm and the video will to play at
the time you have set.
1. *
<>_`\         € 
to open and then press [ENTER] to enter/play the folder/
file.
8. Play list
’“ *
‰ €˜      
select the video.
2. Press [RETURN] to return to the previous directory.
DMP
<_`\ 
C:
<>\ 
Option Set
All
Information
Return
Video
F1
F2
F3
m.mp3
Music
P.jpg
m.mp3
v.dat
Repeat
Once
Picture Mode
User
Subtitle Selection
NO
t.txt
Select
Picture
Enter
Return
Type Filter
Enter
Exit
2) Press [ENTER] to confirm. And press [Exit] to exit the
menu.
Book
Select
I/I
AUDIO
Page up/down
9. Options
Enjoy Video Files
’“ *
<>\ 
   
”“ *
<_`\ 
  
  
„
  „
3) Press [ENTER] to confirm.
10. Program info
1. Press [RED] button to switch to All or Video.
2. Press [ / / ] to select the video you want to view.
Allows you to view the program information.
3. Press [ENTER] to play the video.
11. Stop playback
4. Press [ /RETURN] to exit the video and return to the
previous directory.
NOTE
You can press [ASPECT] button to change the aspect
ratio (Normal, Full Screen, Original Size) while playing
the video.
5. Press [ENTER] button to display/exit the video control
bar.
6. *
<_`\           
press [ENTER] to confirm.
Playable format list
Tool bar
II
00:00:36/00:20:01
2 3 4 5 6
Ě°
7 8 9 10 11
1. The progress bar when playing.
<`^^\    
2. ** „ ‰  
when there is no control bar on the screen.
] directly to
3. Play the previous video. You can press [
achieve the function when no control bar display on the
screen.
33
Files Format
Playable format
Photo
JPG
Music
Mp3
Video
MPEG1(.dat), MPEG2(.mpg/.ts),
XVID (.avi), H.264(.mov/.ts/.mkv)
Advanced Features
3. Press [ENTER] to browse the picture.
1. Press [RED] button to switch to All or Music.
4. Press [ /RETURN] to exit the picture and return to the
previous directory.
Tool bar
Enjoy Music Files
</ / / ] to select the music you want to view.
2. *
DMP
C:\ music
All
II
Ě°
Information
1 2
Return
Video
F1
F2
music
F3
m.mp3
a2.mp3
Return
Page up/down
Type Filter
9 10
1. Browse the previous picture. You can press[
] button
directly to achieve the function when no control bar
displays on the screen.
Book
Enter
7 8
Press [ENTER] button to display/exit the picture control
   
<_`\        
and then press [ENTER] button to confirm.
a3.mp3
Picture
Select
5 6
When browsing the pictures
Music
a1.mp3
3 4
3. Press [ENTER] to play the music.
2. Browse the next picture. You can press [
] button
directly to achieve the function when no control bar
displays on the screen.
Current Playing: a3.mp3
a1.mp3
3. Allows the picture to rotate 90 degrees clockwise.
m.mp3
Title: a1
a2.mp3
4. Allows the picture to rotate 90 degrees anti-clockwise.
Artist:
a3.mp3
Mode: None
00:00:24/00:04:13
Album:
5. Play/pause. You can press [ENTER] button directly
when no control bar on the screen.
Genre: Other
Status: Play
Year:
Duration:00:04:13
6. Œ €     „ ‰  
directly when no control bar on the screen.
Next:
01/01
Mode
Page
up/down
Select
Mark
Play/Pause
<™\ 
7. Zoom in the picture.
Return
8. Zoom out the picture.
4. %           „ *
<>\  
       
<`\    „ ‰ 
press [YELLOW/BLUE] button to turn to the previous /
next page.
9. # Œ „ *
<>\  

<_`\     „
   
 
Speed - Allows you to browse the picture at different
speed.
Press [GREEN] button to select the Mode: Mark/All/
Single.
Effect - Allows you to set how the picture appears on
the screen.
5. Press [RETURN] to exit the music playback interface.
Background Music - Allows you to enjoy the music when
browsing the pictures if it is set On.
Browse the Pictures
Option Set
1. Press [RED] button to switch to All or Picture.
DMP
C:\ Picture
Information
Return
1.jpg
2.jpg
3.jpg
10. Picture info. Allows you to view the picture information.
Picture
Book
Type Filter
Page up/down
2. *
Return
Off
Picture
257:383
Enter
None
Enter
jpg
Music
Select
Fast
Effect
Background Music
All
Video
Speed
</ / / ] to select the picture you want to view.
34
Advanced Features
Browse the Text Files
2. *
1. Press [RED] button to switch to All or Book.
< / / ] to select the text you want to view.
DMP
C:\TXT
All
Video
Information
Return
1.txt
2.txt
TXT
t.txt
Music
Picture
Book
Select
Enter
Return
Type Filter
Page up/down
3. Press [ENTER] button to confirm.
4. Press [ /RETURN] to exit the text and return to the
previous directory.
Tool bar
II
2 3
1.txt
Ě°
1/16
Status:Play
4 5
        
When no tool bar appears on the screen, you can press
<>\  †    
€ „
*
<|‚|ˆ\       „ *
<_`\
to select the corresponding icons and then press
[ENTER] to confirm.
1. Stop/resume automatic page
2. View the previous page.
3. View the next page.
4. Stop browsing.
5. Allows you to select page to view.
Goto Page
0000
’“„ *
<•–—\ 
to adjust it.
”“„ *
<_`\ 
confirm.
Enter
      
  |     
<>\
<|‚|ˆ\ 
35
Other Information
Trouble Shooting
When something appears wrong with your TV refer to below chart. If the proposed remedy’s do not work , then unplug
the AC cord from wall, wait at least 60 seconds, plug AC back in and then turn on the TV. If the problem still cannot be
solved, please contact the help line provided on the warranty card or a professional technician.
SYMPTOMS
POSSIBLE SOLUTIONS
No sound or picture.
Check if the power cord is plugged into AC outlet and if it has electricity.
Check if you have pressed [POWER] button on the TV or [POWER] button on the remote
control.
Check to see if LED light is either red or blue. If illuminated, power to TV is OK.
I have connected an external source
to my TV and I get no picture and/or
sound.
Check for the correct output connection on the external source and for the correct input
connection on the TV.
Make sure you have made the correct selection for the input mode for the incoming signal.
When I turn on my television, there
is a few second delay before the
picture appears. Is this normal?
Yes, this is normal. That is the TV searching for previous setting information and initializing the
TV.
Picture is normal, but no sound.
Check the volume settings.
Check if Mute mode is set “on”.
Sound but no picture or black and
white picture.
If black and white picture first unplug TV from AC outlet and re-plug after 60 seconds.
Check Color Setting if picture is black and white.
Sound and picture distorted or
appear wavy.
An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes
away, move appliance farther away from TV.
Insert the power plug of the TV set into another power outlet.
Sound and picture is blurry or cuts
out momentarily.
If using an external antenna, check the direction, position and connection of the antenna.
Adjust the direction of your antenna or reset or fine tune the channel.
Horizontal/vertical stripe on picture
or picture is shaking.
Check if there is interfering source nearby, such as appliance or electric tool.
The plastic cabinet makes a “clicking”
type of sound.
“Click” sound can be caused when the room temperature changes. This change causes the
television cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.
Black square appears in the center
of my television screen?
The Closed Caption function is set in the text mode. To remove it, access Closed Caption from
the menu screen and change the Mode setting from text to either CC1 or off .
On some channels getting another
language or sometimes no sound at
all.
That would indicate that the MTS mode on your unit is set to “SAP” mode. We suggest setting
the MTS mode to either “Stereo” or “Mono”. For further instruction, please see “MTS” in your user
manual.
SAP is Second Audio Program. It’s a second audio channel that is usually used for a second
language or descriptive audio for the visually impaired.
MTS stands for Multichannel Television Sound, a standard that allows the encoding of 3
channels of audio within a standard NTSC (analog) video signal to a television. A television that
is able to receive MTS Stereo allows you to watch television with stereo sound.
Not getting all of my cable channels
on the television or I'm only getting
13 channels.
Check the cable connection for an incoming signal. The best way to confirm signal is to use another
TV and/or contact your cable company.
After switching to Cable, please auto program the channels. The TV will “remember” all the
channels then the TV will allow you to surf the channels with [CH / V] buttons.
[CH / V] don't work when I set the
Channel to Cable? They work with
the Air setting?
36
Other Information
SYMPTOMS
POSSIBLE SOLUTIONS
Confirm that TV still has power and is operational.
Change the batteries in the remote control.
Check if the batteries are correctly installed.
Remote control does not work.
If using a universal remote, be sure to select the TV mode on the remote.
If the remote still does not work:
-remove and reinstall the batteries correctly to reset the remote or install new batteries.
-press TV and then Power to turn on the TV. With a universal remote if you have reset or
changed the batteries you will need to reprogram the remote for the other units.
Network connection fail.
Check network physical connection, make sure connection is correct.
Enter “Menu”,”Settings”,”Network”,”Configuration” , make sure configuration is correct according
to your network service provider.
Enter “Menu”, “Settings”, “Network”, “Configuration”, “Connection Test” to make sure that
network connection test is successful.
Connect VUDU/Netflix fail.
Check network connection is correct, both physically and configuration.
Enter “Menu”, “Settings”, “Network”, “Configuration”, “Connection Test” to make sure that
network connection test is successful.
For VUDU: Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “VUDU”,
“Deactivation” to reset VUDU account.
For Netflix: Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “Netflix”,
“Deactivation” to reset Netflix account.
Log out VUDU/Netflix or change log
in account.
For VUDU:
1. Press [EXIT] button on remote to exit VUDU.
2. Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “VUDU”, “Deactivation”
to reset VUDU account.
For Netflix:
1. Press [EXIT] button on remote to exit VUDU.
2. Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “Netflix”, “Deactivation”
to reset Netflix account.
DLNA does not work.
Check network connection is correct, both physically and configuration.
Make sure DLNA server (PC or Mac) has shared media content and TV has permission to
access shared media.
Enter “Menu”, “Settings”, “Network”, “Applications”, turn on “DLNA”.
Select Hi-DMP source to find shared contents. Select “Hi-DMP” source by using [INPUT] button
on remote or press [Hi-Smart] button and then select “Multi-Media” Icon.
How do I get the Hi-Smart Hub to
work on my TV?
You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps.
Connect the TV to the Internet through your router by an ethernet cable or wireless connection.
If the connection fails, check with your internet service provider or router manufacturer to
determine if there is a firewall, content filter, or proxy settings that may block the TV from
accessing the Internet.
After connecting the TV to the Internet, press the [Hi-Smart] button on the remote to access the
Hi-Smart Hub.
Caution: Do not try to repair the TV yourself. Refer all servicing to qualified repair personnel.
37
Other Information
General
NOTE
Features, appearance and specifications are subject to change without notice.
Model Name
32D77W
42D77W
Without Stand
Width: 31.2 inches (792 mm)
Height: 19.8 inches (503 mm)
Depth: 4 inches (101.5 mm)
Width: 40.2 inches (1020 mm)
Height: 25 inches (634 mm)
Depth: 4.2 inches (106 mm)
With Stand
Width: 31.2 inches (792 mm)
Height: 22.1 inches (561 mm)
Depth: 9.1 inches (230 mm)
Width: 40.2 inches (1020 mm)
Height: 27.6 inches (700 mm)
Depth: 11.2 inches (285 mm)
Without Stand
19.8 lbs (9 kg)
34.2 lbs (15.5 kg)
With Stand
20.9 lbs (9.5 kg)
37.5 lbs (17 kg)
LCD Panel Minimum size
(diagonal)
32 inches
42 inches
Screen resolution
1366 × 768
1920 × 1080
Audio power
6W+6W
8W+8W
Power consumption
Please refer to the rating label.
Power supply
120 V ~ 60 Hz
Dimension
Weight
Receiving
systems
Analog
NTSC
Digital
NTSC / ATSC / QAM
Environmental conditions
Temperature: 41°F ~ 95°F (5°C~ 35°C)
Humidity: 20%-80% RH
Atmospheric pressure: 86 kPa - 106 kPa
Component Input
480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 Hz
VGA Input
VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)
RGB / 60 Hz (640×480, 800×600, 1024×768)
HDMI Input
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)
The remote control requires:
›    ˜ 
œ”
› ‚ œ %%%
› ! œ ’ !
38

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : liyansong
Create Date                     : 2012:04:12 15:47:04+08:00
Modify Date                     : 2012:04:12 15:47:04+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:04:11 19:59:16+08:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 4400 bytes, use -b option to extract), (Binary data 6583 bytes, use -b option to extract)
Instance ID                     : uuid:33e883e8-2509-4326-87c8-c834f8481f9f
Document ID                     : xmp.did:0F5BC3E8AF7FE11195AFEE3FDB66FD5A
Original Document ID            : xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:2E025DAB6B1AE1118638882CBCDE8A8A, xmp.iid:30025DAB6B1AE1118638882CBCDE8A8A, xmp.iid:31025DAB6B1AE1118638882CBCDE8A8A, xmp.iid:DE49BE5DFB1AE11195FFC9CD267ADB17, xmp.iid:E049BE5DFB1AE11195FFC9CD267ADB17, xmp.iid:E249BE5DFB1AE11195FFC9CD267ADB17, xmp.iid:56216967F21BE111B608921DED0D3E8B, xmp.iid:58216967F21BE111B608921DED0D3E8B, xmp.iid:5A216967F21BE111B608921DED0D3E8B, xmp.iid:5C216967F21BE111B608921DED0D3E8B, xmp.iid:5E216967F21BE111B608921DED0D3E8B, xmp.iid:0CBDE5B7B21CE111B3B3C9220CDAE440, xmp.iid:C1BCC2D0C71CE111BF228E28ECE39EC7, xmp.iid:C2BCC2D0C71CE111BF228E28ECE39EC7, xmp.iid:C4BCC2D0C71CE111BF228E28ECE39EC7, xmp.iid:F10BBD478E1DE111B473EE64AEC1ECCB, xmp.iid:D769CEA78420E1118284894038F48A76, xmp.iid:D969CEA78420E1118284894038F48A76, xmp.iid:AD593889A220E1118284894038F48A76, xmp.iid:08B7A5D12F22E1118315B6CE61A18130, xmp.iid:0AB7A5D12F22E1118315B6CE61A18130, xmp.iid:1AEC206F6C25E111AEF5AE9E3B087F01, xmp.iid:1CEC206F6C25E111AEF5AE9E3B087F01, xmp.iid:E01E204AFC25E111B5EEA5047C05D793, xmp.iid:E31E204AFC25E111B5EEA5047C05D793, xmp.iid:E61E204AFC25E111B5EEA5047C05D793, xmp.iid:D47BBD3FA03AE1119078A3A4E244E215, xmp.iid:D77BBD3FA03AE1119078A3A4E244E215, xmp.iid:DA7BBD3FA03AE1119078A3A4E244E215, xmp.iid:38BFAB6A6E51E111BC7DFDCA37E82C09, xmp.iid:3CBFAB6A6E51E111BC7DFDCA37E82C09, xmp.iid:A8BFC2550452E111B0E4A98E2FF5C0C6, xmp.iid:2CDAC8550452E111B0E4A98E2FF5C0C6, xmp.iid:E1547F722F52E111B0E4A98E2FF5C0C6, xmp.iid:FD95AC6BCF52E1118352C99721391A6E, xmp.iid:A53FBD6BCF52E1118352C99721391A6E, xmp.iid:625FD409EA52E1118352C99721391A6E, xmp.iid:6A4B63890553E1118352C99721391A6E, xmp.iid:3BCE6E33DE55E111B20FCAC0855AE436, xmp.iid:5D6C8133DE55E111B20FCAC0855AE436, xmp.iid:5E6C8133DE55E111B20FCAC0855AE436, xmp.iid:10C3F0D4FC55E111B20FCAC0855AE436, xmp.iid:41049656FE55E111B20FCAC0855AE436, xmp.iid:2704138D0E56E111AD9F9A4DA57044DB, xmp.iid:842ACB981056E111AD9F9A4DA57044DB, xmp.iid:37815EB51856E111AD9F9A4DA57044DB, xmp.iid:A1219C6D2556E111AD9F9A4DA57044DB, xmp.iid:1E1058F7A556E111A22AD1DD19D341B3, xmp.iid:7D7C6DF7A556E111A22AD1DD19D341B3, xmp.iid:B5B65237B356E111A22AD1DD19D341B3, xmp.iid:6912F0EEBB56E111A22AD1DD19D341B3, xmp.iid:FCB7B5A6D256E111A22AD1DD19D341B3, xmp.iid:ECAC8A94D556E111A22AD1DD19D341B3, xmp.iid:47489A2AE456E111A22AD1DD19D341B3, xmp.iid:6AB6DDD9E656E111A22AD1DD19D341B3, xmp.iid:B6EC0EFCE656E111A22AD1DD19D341B3, xmp.iid:B7EC0EFCE656E111A22AD1DD19D341B3, xmp.iid:751E6F2AEA56E111A22AD1DD19D341B3, xmp.iid:F686B9D34E58E111AB318D8E1E99F85A, xmp.iid:7517D6D34E58E111AB318D8E1E99F85A, xmp.iid:1E6F2B0C5F5BE1118BA09DC8C80E71B6, xmp.iid:EF085EB1655BE1118BA09DC8C80E71B6, xmp.iid:B1FED219665BE1118BA09DC8C80E71B6, xmp.iid:B2FED219665BE1118BA09DC8C80E71B6, xmp.iid:B3FED219665BE1118BA09DC8C80E71B6, xmp.iid:336EA1787F5BE1118BA09DC8C80E71B6, xmp.iid:3E5110C1545CE1119D3ED6C2E0FC5C62, xmp.iid:3DAD7F385F5CE1119D3ED6C2E0FC5C62, xmp.iid:40AD7F385F5CE1119D3ED6C2E0FC5C62, xmp.iid:3A6D3F14605CE1119D3ED6C2E0FC5C62, xmp.iid:56332FCC6E5CE111B78BC1540DFEA99D, xmp.iid:D9872003F65CE111AD6990BE00B44C01, xmp.iid:995E3403F65CE111AD6990BE00B44C01, xmp.iid:D6D2A18AFB5CE111AD6990BE00B44C01, xmp.iid:AA2A7476025DE111AD6990BE00B44C01, xmp.iid:18462E78045DE111AD6990BE00B44C01, xmp.iid:1DE07A4C055DE111A4F6F2EB0D3D3DEB, xmp.iid:0B28E351055DE111A4F6F2EB0D3D3DEB, xmp.iid:8F2739CD055DE111A4F6F2EB0D3D3DEB, xmp.iid:59A1BC4E065DE111A4F6F2EB0D3D3DEB, xmp.iid:62AE392B135DE111A4F6F2EB0D3D3DEB, xmp.iid:E5A3BE9DBF5DE111BFF4EE6552B04E0D, xmp.iid:74686273CF5DE111BFF4EE6552B04E0D, xmp.iid:E41E8FC0DE5DE1118F968B467FC06B87, xmp.iid:BF495E77065EE111829BABE2D8010977, xmp.iid:06E337B2075EE111829BABE2D8010977, xmp.iid:E61BEB76855EE1119A02F6C379B43172, xmp.iid:6037BF188D5EE1119A02F6C379B43172, xmp.iid:3A4457A5A45EE1119A02F6C379B43172, xmp.iid:6BF8694FB55EE1119A02F6C379B43172, xmp.iid:17C3B5DEB95EE1119A02F6C379B43172, xmp.iid:DD16B8EF0673E1118F399BB537006F64, xmp.iid:5D03AE223273E1118F399BB537006F64, xmp.iid:1013D8E5D377E111804AA9E0B46EE451, xmp.iid:0F35DF4CDA77E111804AA9E0B46EE451, xmp.iid:7291037AE477E111804AA9E0B46EE451, xmp.iid:34EEFB2EE577E111804AA9E0B46EE451, xmp.iid:35EEFB2EE577E111804AA9E0B46EE451, xmp.iid:85D487457178E111804AA9E0B46EE451, xmp.iid:BE012E857278E111804AA9E0B46EE451, xmp.iid:6961D9367478E111804AA9E0B46EE451, xmp.iid:8B1ADA567678E111804AA9E0B46EE451, xmp.iid:A3C449787978E111804AA9E0B46EE451, xmp.iid:888D2C3F7A78E111804AA9E0B46EE451, xmp.iid:3C342B287D78E111AD12C8A74DF6B669, xmp.iid:A8A75544A078E111A16BEA299898D7FF, xmp.iid:A9A75544A078E111A16BEA299898D7FF, xmp.iid:AAA75544A078E111A16BEA299898D7FF, xmp.iid:857A7CC3AD78E111A16BEA299898D7FF, xmp.iid:5A3D4858B278E111A16BEA299898D7FF, xmp.iid:5B3D4858B278E111A16BEA299898D7FF, xmp.iid:677D81E9B278E111A16BEA299898D7FF, xmp.iid:23D0B632B378E111A16BEA299898D7FF, xmp.iid:26D0B632B378E111A16BEA299898D7FF, xmp.iid:3EF8C7A0BE78E111A16BEA299898D7FF, xmp.iid:D27151C4BE78E111A16BEA299898D7FF, xmp.iid:5A0D7851BF78E111A16BEA299898D7FF, xmp.iid:450DA3CF917FE1118464F5CC9D1212B8, xmp.iid:64DE2B10947FE1118464F5CC9D1212B8, xmp.iid:68667492967FE1118464F5CC9D1212B8, xmp.iid:F988BB10997FE1118464F5CC9D1212B8, xmp.iid:F1B0C9F6A57FE1118464F5CC9D1212B8, xmp.iid:8CC362E4A77FE1118464F5CC9D1212B8, xmp.iid:22B8DBDCAB7FE1118464F5CC9D1212B8, xmp.iid:9D548C26AF7FE111B54390DD9984B468, xmp.iid:875A415DAF7FE111B54390DD9984B468, xmp.iid:1FDA5773AF7FE111B54390DD9984B468, xmp.iid:695A64DAAF7FE11195AFEE3FDB66FD5A, xmp.iid:DFDD8EE8AF7FE11195AFEE3FDB66FD5A, xmp.iid:0F5BC3E8AF7FE11195AFEE3FDB66FD5A, xmp.iid:A93DE27AB17FE1119294B4EEF8239189, xmp.iid:4F9B9CF5B27FE1119294B4EEF8239189, xmp.iid:EFFDC172B37FE1119294B4EEF8239189, xmp.iid:B93FA257D37FE111993FBEBDC343E921, xmp.iid:16303529D47FE111993FBEBDC343E921, xmp.iid:50F803A3DF81E111993FBEBDC343E921, xmp.iid:52F803A3DF81E111993FBEBDC343E921, xmp.iid:9873D5BFE081E111993FBEBDC343E921, xmp.iid:B246E5BDB882E111B150D8C6B202F871, xmp.iid:FECF61F3BC82E111B150D8C6B202F871, xmp.iid:3359FB8BBD82E111B150D8C6B202F871, xmp.iid:F57EA7C17883E1118A429349E1715D34
History When                    : 2011:11:29 18:04:21+08:00, 2011:11:29 19:54:54+08:00, 2011:11:29 19:54:54+08:00, 2011:11:30 10:31:10+08:00, 2011:11:30 10:31:11+08:00, 2011:11:30 13:44:58+08:00, 2011:12:01 15:59:32+08:00, 2011:12:01 15:59:32+08:00, 2011:12:01 17:09:12+08:00, 2011:12:01 17:37:48+08:00, 2011:12:01 17:48:39+08:00, 2011:12:02 14:56:11+08:00, 2011:12:02 17:27:12+08:00, 2011:12:02 17:27:12+08:00, 2011:12:02 19:05:44+08:00, 2011:12:03 17:07:52+08:00, 2011:12:07 11:36:32+08:00, 2011:12:07 11:36:32+08:00, 2011:12:07 17:10:24+08:00, 2011:12:09 14:34:17+08:00, 2011:12:09 14:34:17+08:00, 2011:12:13 17:25:44+08:00, 2011:12:13 17:25:44+08:00, 2011:12:14 10:35:30+08:00, 2011:12:14 11:37:27+08:00, 2011:12:14 15:32:15+08:00, 2012:01:09 16:59:33+08:00, 2012:01:09 16:59:33+08:00, 2012:01:09 18:18:36+08:00, 2012:02:07 17:30:47+08:00, 2012:02:07 17:30:47+08:00, 2012:02:08 11:23:56+08:00, 2012:02:08 11:23:57+08:00, 2012:02:08 16:32:33+08:00, 2012:02:09 11:37:41+08:00, 2012:02:09 11:37:41+08:00, 2012:02:09 14:48:13+08:00, 2012:02:09 18:05:04+08:00, 2012:02:13 09:01:03+08:00, 2012:02:13 09:01:03+08:00, 2012:02:13 12:01:12+08:00, 2012:02:13 12:40:19+08:00, 2012:02:13 12:51:06+08:00, 2012:02:13 14:47:09+08:00, 2012:02:13 15:01:48+08:00, 2012:02:13 15:59:52+08:00, 2012:02:13 17:30:55+08:00, 2012:02:14 08:51:01+08:00, 2012:02:14 08:51:01+08:00, 2012:02:14 10:25:52+08:00, 2012:02:14 11:28:16+08:00, 2012:02:14 14:10:53+08:00, 2012:02:14 14:31:51+08:00, 2012:02:14 16:16:16+08:00, 2012:02:14 16:35:29+08:00, 2012:02:14 16:36:26+08:00, 2012:02:14 16:48:23+08:00, 2012:02:14 16:59:13+08:00, 2012:02:16 11:32:18+08:00, 2012:02:16 11:32:18+08:00, 2012:02:20 09:53:32+08:00, 2012:02:20 09:53:32+08:00, 2012:02:20 09:56:27+08:00, 2012:02:20 10:36:38+08:00, 2012:02:20 11:40:13+08:00, 2012:02:20 12:58:04+08:00, 2012:02:21 15:39:43+08:00, 2012:02:21 15:39:43+08:00, 2012:02:21 15:45:52+08:00, 2012:02:21 15:45:52+08:00, 2012:02:21 17:31:14+08:00, 2012:02:22 09:39:08+08:00, 2012:02:22 09:39:08+08:00, 2012:02:22 10:18:43+08:00, 2012:02:22 11:08:15+08:00, 2012:02:22 11:22:37+08:00, 2012:02:22 11:28:33+08:00, 2012:02:22 11:28:42+08:00, 2012:02:22 11:32:09+08:00, 2012:02:22 11:35:46+08:00, 2012:02:22 13:07:50+08:00, 2012:02:23 11:35:37+08:00, 2012:02:23 11:35:37+08:00, 2012:02:23 13:25:09+08:00, 2012:02:23 18:09:26+08:00, 2012:02:23 18:18:14+08:00, 2012:02:24 09:18:31+08:00, 2012:02:24 10:13:09+08:00, 2012:02:24 13:01:43+08:00, 2012:02:24 15:01:01+08:00, 2012:02:24 15:33:39+08:00, 2012:03:21 16:44:56+08:00, 2012:03:21 16:44:56+08:00, 2012:03:27 14:12:57+08:00, 2012:03:27 14:58:47+08:00, 2012:03:27 16:11:38+08:00, 2012:03:27 16:16:41+08:00, 2012:03:27 17:29:19+08:00, 2012:03:28 08:59:29+08:00, 2012:03:28 09:08:25+08:00, 2012:03:28 09:20:32+08:00, 2012:03:28 09:35:45+08:00, 2012:03:28 09:58:10+08:00, 2012:03:28 10:03:43+08:00, 2012:03:28 10:24:33+08:00, 2012:03:28 14:35:53+08:00, 2012:03:28 14:37:47+08:00, 2012:03:28 16:06:48+08:00, 2012:03:28 16:12:30+08:00, 2012:03:28 16:45:17+08:00, 2012:03:28 16:47:25+08:00, 2012:03:28 16:49:21+08:00, 2012:03:28 16:51:24+08:00, 2012:03:28 17:34:01+08:00, 2012:03:28 18:13:13+08:00, 2012:03:28 18:14:13+08:00, 2012:03:28 18:31:05+08:00, 2012:04:06 10:40:02+08:00, 2012:04:06 10:56:10+08:00, 2012:04:06 11:14:07+08:00, 2012:04:06 11:31:58+08:00, 2012:04:06 13:04:18+08:00, 2012:04:06 13:18:06+08:00, 2012:04:06 13:46:31+08:00, 2012:04:06 14:10:04+08:00, 2012:04:06 14:11:35+08:00, 2012:04:06 14:12:12+08:00, 2012:04:06 14:15:05+08:00, 2012:04:06 14:15:29+08:00, 2012:04:06 14:15:29+08:00, 2012:04:06 14:26:44+08:00, 2012:04:06 14:37:19+08:00, 2012:04:06 14:40:49+08:00, 2012:04:06 18:29:08+08:00, 2012:04:06 18:34:59+08:00, 2012:04:09 09:02:11+08:00, 2012:04:09 09:05:46+08:00, 2012:04:09 09:10:08+08:00, 2012:04:10 10:56:16+08:00, 2012:04:10 11:26:24+08:00, 2012:04:10 11:30:40+08:00, 2012:04:11 09:50:46+08:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5
History Changed                 : /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:DFDD8EE8AF7FE11195AFEE3FDB66FD5A
Derived From Document ID        : xmp.did:5D03AE223273E1118F399BB537006F64
Derived From Original Document ID: xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A
Derived From Rendition Class    : default
Doc Change Count                : 12023
Format                          : application/pdf
Creator                         : liyansong
Title                           : LTDN42D77WUS说明书.pdf
Producer                        : Acrobat Distiller 9.4.6 (Windows)
Trapped                         : False
Page Count                      : 45

EXIF Metadata provided by EXIF.tools