Hisense Electric LCDD0022 Part15 Subpart B-LCD Monitor User Manual W9HLCDD0022 2
Hisense Electric Co., Ltd. Part15 Subpart B-LCD Monitor W9HLCDD0022 2
Contents
- 1. W9HLCDD0022_user Manual 1
- 2. W9HLCDD0022_user Manual 2
W9HLCDD0022_user Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1783063 |
| Application ID | bKn0ikLRlpHS0bJ0sb7sCw== |
| Document Description | W9HLCDD0022_user Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 143.76kB (1796957 bits) |
| Date Submitted | 2012-09-05 00:00:00 |
| Date Available | 2012-09-07 00:00:00 |
| Creation Date | 2012-07-17 18:23:11 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2012-07-17 18:23:40 |
| Document Title | W9HLCDD0022_user Manual 2 |
| Document Creator | Adobe InDesign CS5.5 (7.5.1) |
ES- Antes de utilizar el televisor, lea detenidamente este manual, consérvelo para futuras referencias. Español ES-G English The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. FCC Statement Energy Star NOTE: Your Hisense TV is ENERGY STAR ® qualified in the “energy saving ” mode. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices. Changes to certain features, settings, and functionalities of this TV (i.e. TV Guide, Picture, Sound) can increase or change the power consumption. Depending upon such changed settings, the power consumption may exceed the limits required for the ENERGY STAR qualification in the “energy saving ” mode. This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: NOTE Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. WARNING The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority. This TV incorporates High-Definition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other countries. All other trademarks are property of their respective owners. 2011 Hisense USA, Corporation. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. * Specifications subject to change without notice. II Important Safety Instructions 19. If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and builtup static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with cart, stand, tripod, bracket, or table specified by the m a n u f a c t u r e r, o r s o l d w i t h t h e apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal. 17. Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock. 18. Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit. 20. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21. Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22. When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 23. Sudden high volume sound may cause hearing or speaker damage. When you use headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high volume sound, it may cause hearing damage. CONDENSATION: Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit. III Important Safety Instructions End of life directives HOW TO HANDLE THE LCD PANEL: Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur. If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation. If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to find a recycler in your area. Non-active pixels The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed black (in the case of a dead pixel), blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects. Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the following formats or images: Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites. Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen). Power source TO USE AC POWER 1. The power cord is attached to the TV at the factory. 2. Connect the AC cord into an AC outlet. WARNING Do not connect this unit to the power using any device other than the supplied AC cord. This could cause fire, electrical shock, or damage. The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms. Do not use with a voltage other than the power voltage specified. This could cause fire, electrical shock, or damage. LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference. Effect on infrared devices - There may be interference while using infrared devices such as infrared cordless headphones. CAUTION When this unit is not used for a long time, (e.g., away on a trip) in the interest of safety, be sure to unplug it from the AC outlet. Do not plug/unplug the AC cord when your hands are wet. This may cause electrical shock. Declaration of Conformity This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IV Contents Getting Started When Installing the TV Against a Wall or Enclosed Area................................. 2 Viewing the Remote Control............................................................................. 3 Installing Batteries in the Remote Control........................................................ 4 Making Connections......................................................................................... 5 Basic Features Turning your TV on or off.................................................................................. 8 Turning your TV for the First Time.................................................................... 8 Selecting the Input Source............................................................................... 9 Changing Channels / Volume........................................................................... 9 Shortcuts Instructions....................................................................................... 9 To Use the Menu............................................................................................. 10 Using the Video Menu..................................................................................... 10 Using the Audio Menu..................................................................................... 11 Using the TV Menu.......................................................................................... 11 Using the Setup Menu..................................................................................... 12 Using the Photos Menu................................................................................... 14 Other Information Trouble Shooting............................................................................................. 16 Getting Started When Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 41°F (5°C). Install with stand Install on the wall 12 inches (30cm) 4 inches (10cm) 12 inches (30cm) 4 inches (10cm) 2 3⁄8 inches (6cm) 4 inches (10cm) 4 inches (10cm) Leave at least this much space around the set. Leave at least this much space around the set. 4 inches (10cm) Never install the TV set as follows: Air circulation is blocked. Wall Wall Inadequate air circulation can lead to overheating of the TV and may cause damage to your TV or cause a fire. Getting Started Viewing the Remote Control Remote sensor Power on/off TV INPUT Select input source Enter TV source Select AV Component HDMI VGA source Zoom button Open the DTV program guide (not available) AV COMP HDMI VGA ASPECT GUIDE PICTURE SOUND Select picture mode Select sound mode Display the information banner DISPLAY Increase volume Next channel MUTE Previous channel Decrease volume Mute button Menu button MENU EXIT ▲ ▲ ▲ ▲/ / / Move Up/Down/Left/Right or adjust settings Close the menu Direct channel selection Confirm selections LAST Dash button Select a digital sub-channel Go to the previous channel Function buttons (not available) Adjust CC mode Audio select button Mono/Stereo/SAP operation CCD MTS/SAP FAV. SLEEP Set the sleep timer Display favorite list NOTES Illustrations are for your reference only. Getting Started Installing Batteries in the Remote Control Change the batteries 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. Gently push and slide Insert the batteries Gently push and slide NOTES 1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire. 2. Do not mix battery types or combine used batteries with new ones. 3. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment. 4. If you do not intend to use the remote control for a long time, remove the batteries. 5. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. 6. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately. 7. Do not mix old and new batteries. 8. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries. Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television! If you would like to program your other household remote controls to your new Hisense television,please consult the User’s Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’User’s Manuals should include instructions on how to program their remote to your television. Below is a list of Hisense codes for the most common Cable and Satellite providers. Use the Hisense code that is associated with your Cable or Satellite provider (if applicable). DIRECTV……………………..…0178 or 10019 Time Warner Cable………….…386 or 0178 Comcast…………………………0178 or 10178 Cox Communications………..…0178 Dish Network……………………627 or 505 If the Hisense code associated with your Cable or Satellite provider is not listed above,if the code above does not work, or if you cannot locate the instructions for programming your household remote to your television,call your local Cable or Satellite provider’s customer service center. The effective range of remote control 1. The remote control distance: 315 inches in front of the TV set. 2. The remote control angle: taking the television infrared light receiver window as an apex, 236 inches away, its controlled angle (left to right) is within 30 degrees, while the vertical angle (up to down) is within 30 degrees. Getting Started Making connections NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. Not all A/V devices have the ability to connect to a TV, please refer to the user’s manual of your A/V device for compatibility and connections procedure. Always unplug the power cord when connecting external equipment. Connecting an antenna, cable or cable/satellite box 1. Turn off the TV before connecting the antenna. 2. Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna, cable or cable/satellite box. If you are using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided). 3. Connect the other end of the cable to the ANT/CABLE IN jack on the side of your TV. TV JACK EXTERNAL DEVICES Cable ANT OUT or ANT/CABLE VHF/UHF Antenna Connecting an A/V Device with Composite Cable 1. Use the audio and video cables to connect the external A/V device’s composite video/audio jacks to the TV’s jacks. (Video = yellow, Audio Left = white, and Audio Right = red) 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV. EXTERNAL DEVICES TV JACK Red(R) Red(R) DVD Player/Recorder AV IN VIDEO VCR White(L) Yellow(Video) AV Cable (not included) White(L) Yellow(Video) Video A/V OUT Video Camera Set-top box Satellite antenna cable Satellite Receiver Equipment with A/V jacks Getting Started Connecting an A/V Device with Component (YPBPR) Cable 1. Use a component cable to connect the external A/V device’s component output jacks to the TV’s YPBPR jacks. Use an audio cable to connect the external A/V device’s component audio jacks to the Tv’s AUDIO (L/R) jacks. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV. EXTERNAL DEVICES PB PR COMPONENT IN TV JACK VCR Red(R) White(L) Audio Cable (not included) PR/CR PB/CB Red(R) White(L) DVD Player/Recorder PR/CR Component Cable (not included) PR PB/CB Video Camera PB Set-top box Satellite antenna cable Satellite Receiver Component Equipment with A/V jacks Connecting an A/V Device with HDMI Cable Support digital connections between HDMI - enabled AV devices such as PVR, DVD, Blu-ray, AV receiver and digital devices. Some devices such as PVR or DVD player require HDMI signal to be set to output in the device's settings. Please consult your device user manual for instructions. 1. Use an HDMI cable to connect the A/V device’s HDMI output jack to the TV’s HDMI jack. 2. Plug the connected devices into the mains socket before switching on the TV . 3. Select the corresponding source from the TV. EXTERNAL DEVICES HDMI Cable (not included) HDMI HDMI TV JACK DVD Player/Recorder Set-top box Equipment with HDMI jacks NOTE The HDMI connector provides both video and audio signals, it’s not necessary to connect the audio cable. Connecting a headphone TV JACK Headphones can be connected to the HEADPHONE output on your set. (While the headphone is connected, the sound from the built-in speakers will be disabled.) AUDIO OUT EXTERNAL DEVICES Getting Started Connecting a PC with VGA Cable 1. Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio output jack to TV’s VGA AUDIO IN jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV. PC/DVI AUDIO IN EXTERNAL DEVICES Audio Cable (not included) VGA TV JACK VGA Cable (not included) Computer NOTES Primarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility is not warranted. The VGA cable will not supplied with the product. We strongly recommend to use VGA cable with 2 cores as shown in the figure. Connecting an Audio Receiver with Digital Audio out cable 1. Use a coaxial cable to connect the A/V device’s digital audio in jack to the TV’s DIGITAL AUDIO OUT jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV. EXTERNAL DEVICES TV JACKS DIGITAL AUDIO OUT Audio Amplifier Powerless Bass Speaker Speaker NOTES When a digital audio system is connected to the DIGITAL AUDIO OUT (COAXIAL) jack, decrease the volume of both the TV and the system. 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. When the receiver (home theater) is set to on, you can hear sound output from the TV’s digital audio out jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD/Blu-ray player/cable box/STB satellite receiver directly to an amplifier or home theater. Basic Features Turning your TV on or off 4. Press [▲/▼] to select your Picture Mode: Home Mode or Retail Mode, press [ENTER] button to confirm. To turn your TV on or off (standby mode): 1. Plug the power cord into an AC power outlet. 2. Press [POWER] button. Your TV turns on. 3. Press [POWER] button again to turn off your TV. When you turn off your TV, it goes into standby mode. Initial Setup Picture Mode Choose Your Picture Mode: Home Mode Retail Mode WARNING When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord. Back Next EXIT Exit If you select Retail Mode, a message appears “If you select Retail Mode, then Energy saving is not realized. Are you sure?” Select “Yes” to continue, or select “No” to change your selection. 5. Press [▲/▼] to select your Tuner Mode: Antenna or Cable, press [ENTER] button to confirm. NOTE If your TV does not receive an input signal for several minutes, it automatically goes into standby mode. Turning the TV On for the First Time Initial Setup Tuner Please select your tuner mode: The Setup Wizard menu appears the first time you turn on the TV. It will assist you to specify the menu language, Picture Mode, Tuner Mode and Channel Installation. Antenna Cable IMPORTANT: Make sure that the antenna or cable is connected. 1. Make sure that you have: Back Select Next EXIT Exit 6. Press [▲/▼] to set the Channel Installation: Scan or Skip Installed the remote control batteries. Scan, press [ENTER] button to confirm. Connected an antenna or cable. Connected the power cord. Initial Setup 2. Connect your TV’s power cord to a power outlet, then press power. The Initial Setup screen opens. Initial Setup Select Channel Scan First, please connect cable and/or antenna. Scan Skip Scan Start channel scan now? Welcome If you skip this step, the channel scan could be performed in Menu. Welcome to use the Wizard for Initial Setup!! Please press [ ENTER ] to start the Back wizard. Select Next EXIT Exit If you select “Scan”, your TV automatically starts Channel Installation available in your viewing area. If you select “Skip Scan”, your TV does not scan for channels. Depending on the reception condition, it may take several minutes to scan channels. Please allow the process to complete without interruption. 3. Please press [ENTER] to start the wizard, then press [▲/ ] button to select your language, press [ENTER] button to confirm. ▲ Initial Setup Language Please select your language: English Español Français Back Select Next EXIT Exit Basic Features Selecting the Input Source Auto: Automatically adjusts the image based on the screen size and the TV program. The first time you turn on your TV, you must select the TV signal source. Your TV stores this information, so you do not need to change the TV signal source unless it changes. For example, you change from an outside antenna to cable TV. To select the video input source: 1. Turn on your TV, then press [INPUT] button on the remote or on the TV. The Input Source menu opens. 2. Press [▲/ ] button to highlight the input source, then press [ENTER] button. 3. Press [POWER] button again to turn off your TV. When you turn off your TV, it goes into standby mode. Note: Auto is only available when Auto Zoom in the Channels menu is set to On. Zoom: Stretch the 4:3 aspect ratio image vertically and horizontally to fill the screen at 1:1.78 aspect ratio. ▲ Cinema: Stretch the 4:3 aspect ratio image vertically and horizontally to fill the screen at 1:2.35 aspect ratio. Changing Channels / Volume Picture - Press to set the picture mode. It can be set as Vivid, Standard, Energy Savings, Theater or Custom. This mode achieves a certain image display effect by setting the brightness, contrast and color etc. 1. Press the [CH /V] on the TV/remote control to change the channel. 2. Press the [VOL /V] (or [VOL +/-]) on the TV/remote control to adjust the volume. 3. Press the numeric buttons on the remote control to display the corresponding channels. Sound - Press to set the sound mode. It can be set as Standard, Theater, News, Music and Custom. Mute - Press to turn the sound off, press this button again to turn the sound back on. This function is used to switch off sound temporarily. NOTE Changing the channels can also be achieved by directly entering the channel number using the numeric keys on the remote control. If you are entering a two or three digit channel number, the time between key presses should be less than 3 seconds. Sleep - It can set the TV to let it enter into the Standby state automatically. Press this button repeatedly to select the proper sleeping clock mode, and the clock tells you the remaining time before the TV enters Standby state. Display - Display the information banner. The information including channel number, channel name, current system time, tuner mode, audio stream, video format, audio language, closed caption mode, parental locks rated, program details, etc. Shortcuts Instructions Aspect - Select the screen aspect ratio from Normal, Wide, Zoom and Cinema. Normal: The original 4:3 aspect ratio (1.33:1 signal) is preserved, so black bars are added to the left and right of the image. Standard TV broadcasts are displayed with a 4:3 aspect ratio. Wide: When watching a standard broadcast or full-frame movie in this mode, the display image is stretched proportionately to fill the TV screen. When watching a widescreen (1.78:1 signal) program or movie, the display image fills the TV screen. Basic Features To Use the Menu 1 Press the [Menu] to open the main menu. 2 Press [▲/ ] to select a menu option, then press [ / ▲ ▲ Video Picture Mode Brightness Contrast Saturation HUE Sharpness Advanced Video Reset Video Settings ENTER] button to enter the menu. 3 In each menu, you can: ▲ ▲ ▲ Press [▲/ ] to select an item, Press [ / ] to adjust the value, or Press [ /ENTER] to enter the submenu, Press [MENU] to back the previous menu. ▲ 4 Press [EXIT] to exit the menu. 50 50 50 50 50 Select MENU Back NOTE The menus in the user manual may vary slightly from the actual screen. Using the Video Menu Advanced Video Back Light Aspect Ratio Color Temperature Overscan DNR Adaptive Luma Control Adaptive Back Light Video Picture Mode Brightness Contrast Saturation HUE Sharpness Advanced Video Reset Video Settings 50 50 50 50 50 Select MENU 99 Wide Cool On Medium On LOW Select MENU Back Back Light: Sets the overall brilliance of the screen. When the option of Adaptive Back Light sets Low or High, you cannot change the Back Light setting. Back You can adjust: Aspect Ratio: To choose the screen aspect ration from Wide, Auto, Normal, Zoom and Cinema. Picture Mode - Adjust the Picture Mode. You can select Vivid, Standard, Energy Savings, Theater or Custom.. NOTE Brightness - Increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture. The option of the screen Aspect Ration is different in different inputs. (For more information, see “Shortcuts Instructions”) Contrast - Increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture. Color Temperature: Change the color temperature. You can select the color temperature from three options: Cool, Standard or Warm. Overscan: Adjusts the picture’s reproduction rate. You can select On or Off. Saturation - Adjust the intensity of the colors. HUE - Adjust the overall color of the picture. DNR: Select to reduce the noise level of connected equipment: off, Low, Medium, Strong, Auto. Sharpness - You can increase the sharpness level for clearer images or decrease the sharpness level for smoother images. Adaptive Luma Control: According to the content of picture, it can adjust brightness automatically. Advanced Video - Access advanced video settings such as Back Light, Color Temperature and DNR. Adaptive Back Light: Enhances the contrast ratio between light and dark areas of the picture. You can select Off, Low, or High. 10 Basic Features Using the Audio Menu STEREO: Select this option for programs broadcast in stereo. SAP: Depending on the particular program being broadcast, you can listen to a foreign-language translation. Audio Sound Mode Balance Equalizer Speaker Auto Volume Control Advanced Audio Reset Audio Settings ENTER Adjust Music Audio Language - Change the default value for audio language. (Digital channels only) On Off Select Reset Audio Settings - Resets all Audio Settings to the factory defaults. MENU Back Using the TV Menu You can adjust: Sound Mode - Select the Sound Mode: Standard, Theater, News, Music or Custom. TV Tuner Mode Channel Scan Channel Skip Favorite List Audio Only Balance - Adjust the volume of the left and right speakers. Equalizer - Soften or enhance the sound at specific frequency points. Speaker - Selects where to play TV audio. You can select On (default setting) to play audio through TV speakers, or select Off to play audio through the speakers on an external audio system. Off Select Auto Volume Control - Automatically adjusts volume to a consistent level; attenuates loud passages. MENU Back You can adjust: Tuner Mode - Select the TV signal source. You can select Antenna or Cable. Advanced Audio - Access Advanced Audio settings such as SPDIF Type, MTS, Audio Language. Channel Scan Advanced Audio SPDIF Type MTS Audio Language Cable PCM Stereo English Status: Scanning... Analog Channels: 0 Digital Channels: 1 Antenna 1% EXIT Select MENU Cannel Back Channel Scan - Scans for channels that have signals and stores the channels information in memory. SPDIF Type: Send digital audio to an external audio system. You can select PCM, RAW or Off. Digital Channels: The scanned TV program in digital signals. PCM: PCM outputs two channel audio regardless of the input format. Analog Channels: The scanned TV program in analog signals. RAW: When the data stream carries Dolby signal, digital SPDIF outputs Dolby data stream. When the data stream carries no Dolby signal, it transports PCM data stream. Channel Skip - You can cancel a channel stored in memory. NOTE MTS: Select the default audio stream, you can select Mono, Stereo or SAP (Second Audio Program). When you press [CH /V] button, your TV skips the channel you cancelled. You can still tune to the channel using the number buttons on the remote control. MONO: Select this option if there is noise or static on weak stereo broadcasts. 11 Basic Features Favorite List - Display your Favorite List. You can add or delete channels to create your favorite list. Button Lock: Block or unblock the button of remote control. Rating Enable: Block or unblock TV ratings. Favorite List Block Unrated: Block unrated TV programs. Analog Analog Analog Analog Analog Analog Analog Analog Analog U.S. TV Ratings: Restrict TV programs by USA Ratings. Open V-Chip: Display an advanced V-Chip ratings table for digital channels (USA only). Block Unrated: Block unrated TV programs U.S. Movie Ratings: Restrict movie by USA Ratings. ENTER Set Select MENU Back Canadian English/French Ratings: Restrict movie and Audio Only - Listen to the program audio only, when you TV programs by Canadian Ratings. turn off the picture on your TV. Change Password: If you want to change the default password, first enter the new password then enter the same password again. NOTES Audio Only works only when the input source is TV, and your TV is receiving a broadcast signal. To exit audio only mode, press any button. When you exit audio only mode, the Audio Only option is automatically reset to Off. Following is the description of these ratings. U.S. TV Ratings Using the Setup Menu Age Defined as TV-Y All children TV-Y7 Directed to older children TV-G General audience Setup TV-PG Parental Guidance suggested Parental Closed Caption Time Menu Language HDMI-CEC Computer Settings Component Settings Reset Default TV-14 Parents Strongly cautioned TV-MA Mature Audience only English Contents Defined as All of the ratings below that rating set blocked automatically Suggestive dialogue You can adjust: Strong language Parental - Prevent unauthorized users, such as children, from watching unsuitable programme. Sexual situations Violence ENTER Set Select MENU Back FV Parental Button Lock Rating Enable Block Unrated U.S. TV Ratings U.S. Movie Ratings Canadian English Ratings Canadian French Ratings Change Password Off Off Off U.S. Movie Ratings Rating PG PG-13 Select MENU Fantasy Violence Back NC-17 When you first use this function, the default password is [0000]. Once you input this password, you can set options. 12 Defined as General audience Parental Guidance suggested Parents strongly cautioned Restricted No one 17 and under admitted Adult audience only Basic Features while the other is the custom style where you can adjust the font size, color, opacity, background color etc.. Canadian English Ratings Rating C8+ Description Time - Access Time settings such as Time Zone, DAta Time, Sleep Timer. Children Children 8 years and older Time General Programming, suitable for all audiences PG Parents Guidance 14+ Viewers 14 years and older 18+ Adult Programming Time Zone Date/Time Sleep Timer Canadian French Ratings Rating Select Description 8 ans+ 8+General; Not recommended for young children 13 ans+ Programming may not be suitable for children under the age of 13 16 ans+ Programming is not be suitable for children under the age of 16 18 ans+ Programming restricted to adults MENU Back Time Zone: Select your local time zone: Eastern Time, Hawaii, Alaska, Arizona, Indiana, Mountain Time, Central Time or Pacific Time. General Data/Time: You can set time manually or select automatic if the TV is connected to an antenna or cable source. Auto Synchronization: Select “On” to for automatic date and time setting using information from broadcast stations in your area. Date: Set the current year/month/day. Time: Set the current time. NOTE Timer: When “On”, you can set the time when the TV turns on/off automatically. As you block rating, all rating higher than the ones you select are blocked as well. E.g. if you choose to block the MPAA rating R, the higher ratings, NC-17 and X, are automatically blocked too. Power On Timer: Set the desired time for the TV to turn on automatically. Power Off Timer: Set the desired time for the TV to turn off automatically. Closed Caption - Adjust Closed Captioning settings. Sleep Timer: Specify the amount of time before your TV automatically turns off. Closed Caption CC Mode Analog Closed Caption Digital Closed Caption Digital Caption Style Off CC Off CC1 Service1 Select MENU Menu Language - You can select the menu’s language to English, Spanish or French. HDMI-CEC - HDMI-CEC lets you control HDMI CECcompatible devices connected to the HDMI jacks on your TV using the remote control that came with your TV. To use HDMI-CEC, you must set the HDMI-CEC Control setting on the Settings-HDMI-CEC menu to On. Back CC Mode: To select CC Off (turns off closed caption), CC On (turns on closed caption), or CC on when Mute (turns on closed caption when the sound is muted). NOTES HDMI cables must be used to connect HDMI CECcompatible devices to your TV. Analog Closed Caption: Select an Analog Caption setting from CC1~CC4, TEXT1~TEXT4. The connected device’s HDMI CEC feature must be turned on. Digital Closed Caption: Select a Digital Caption setting: Service1~Service6. Digital Caption Style: There are two Caption Styles. One is the automatic function set as the broadcaster, 13 Basic Features If you connect an HDMI device that is not HDMI CECcompatible, all the HDMI-CEC Control features do not work. Component Settings Phase Reset Component Settings Depending on the connected HDMI device, the HDMICEC Control feature may not work. 12 HDMI-CEC HDMI-CEC Control Device Auto Power Off TV Auto Power On Audio Receiver Root Menu HDMI-CEC Device Lists On Off Off Off ENTER Adjust Select MENU Back Phase: Adjust the focus of stable images. Reset Component Settings: This function can help you restore the component settings. Select MENU Reset Default - Every TV has its original setting before leaving the factory. This function can help you restore these settings. Back HDMI-CEC Control: Turning HDMI-CEC function on or off. Using the Photos Menu Device Auto Power Off: When HDMI-CEC is turned on, Device Auto Power Off turns off HDMI CEC devices when you turn off your TV. You can connect a USB flash drive to your TV to view compatible JPEG pictures. TV Auto Power On: When HDMI-CEC is turned on and you turn on an HDMI CEC device, TV Auto Power On turns on your TV automatically. NOTES Never remove the USB flash drive or turn off your TV while viewing JPEG pictures. Audio Receiver: When HDMI-CEC is turned on and you have connected an audio receiver to your TV, turning on Audio Receiver lets you use your TV’s remote control to control the volume on the audio receiver. The JPEG picture viewer only supports JPEG format images (with “.jpg’’ file extensions) and not all JPEG files are compatible with the TV. Root Menu: You can open an HDMI-CEC-compatible device’s root menu, then use your TV’s remote control to control the device. To switch to USB mode 1. Make sure that you have connected the USB flash drive to the USB port on the back of your TV. HDMI-CEC Device Lists: You can display a list of HDMI CEC devices that are connected to your TV. 2. Press INPUT. The input source list opens. 3. Press ▲ or ▼ to highlight USB, then press ENTER. Computer Settings (Only available in VGA mode.)Access Computer Settings such as H.Position, V.Position, Phase, Phase and Auto Adjust. NOTE When you connect a USB flash drive to your TV, your TV automatically detects the device and displays the message “ Do you want to show photos in USB?” select Yes to switch to USB mode or select No to stay in the current mode. H.Position: Move the image right or left. V.Position: Move the image up or down. Phase: Adjust the focus of stable images. Clock: Adjust the sample frequency. Auto Adjust: Detects input signal clock, phase and position and adjusts TV display accordingly. Component Settings (Only available in Component mode.) - Access Component Settings such as phase, Reset Component Settings. 14 Basic Features Favorite Photos - Browse among your photos created in your favorite photo list quickly. View Slideshow - View your photos in a slide show. Settings - Customize the slide show settings. You can select Repeat, Shuffle, Speed, and Transition. Photos Browse Photos Favorite Photos View Slideshow Settings Settings ENTER Enter Select MENU Repeat Shuffle Speed Transition Exit You can adjust: Off Off 6sec None Browse Photos - Browse folders and photo files stored on the USB flash drive. Select Picture1 Picture2 Picture3 Picture4 Picture5 JPEG 050670 JPEG 050671 JPEG 050672 JPEG 050673 Picture6 ENTER Select EXIT Previous MENU Back Repeat: Repeats the slide show when it reaches the end. You can select On or Off. Shuffle: Displays the slide show photo in random order. You can select On or Off. Speed: Sets the amount of time a photo is displayed before the slide show moves to the next photo. You can select 4 Sec, 6 Sec, or 8 Sec. Transition: Select the way photos transition when moving to the next file in the slide show. Picture7 Move MENU Exit To navigate the thumbnail index screen, press: ▲▼◄ or ► to browse through the files and folders. ENTER to view a highlighted photo full-screen or open a highlighted folder. You can select: None: No transition effect. MENU to open the Photos menu. Fade to Black: Fades the screen to black between photos. FAVORITE to add or remove a photo from the favorite photo list. A heart appears on a photo that has been added to the favorite photo list. Vertical Wipe: Wipes the screen from left to right between photos. EXIT to clear the control bar. Horizontal Wipe: Wipes the screen from top to bottom between photos. To navigate on the photo screen, press: ◄ or ▲ to go to the previous photo. Random: Randomly selects a transition effect. ► or ▼ to go to the next photo. ENTER to rotate the photo clockwise. ASPECT one or more times to enlarge the image by 1×, 2×, 3×, 4×, or to fill the screen (Fill). If arrows appear in Zoom mode, you can press ▲▼◄ or ► to pan the photo. EXIT to return to the thumbnail index. MENU to go to the Photos menu. NOTE When you connect a USB flash drive to your TV, your TV automatically detects the device and displays the message “ Do you want to show photos in USB?” select Yes to switch to USB mode or select No to stay in the current mode. 15 Other Information Trouble Shooting When there is something wrong with your TV, you can try turning off the TV and then restart it. You can also Operate according to the following chart. If the problem still cannot be solved, please contact the professional technicians. SYMPTOMS POSSIBLE SOLUTIONS No sound or picture. Check if the power cord is in the AC outlet and if it has electricity. Check if you have pressed [POWER] button on the TV or [POWER] button on the remote control. Check to see if LED light is either red or blue. If illuminated, power to TV is OK. I have connected an external source to my TV and I get no picture and/or sound. Check for the correct output connection on the external source and for the correct input connection on the TV. Make sure you have made the correct selection for the input mode for the incoming signal. When I turn on my television, there is a few second delay before the picture appears. Is this normal? Yes, this is normal. That is the TV searching for previous setting information and initializing the TV. Picture is normal, but no sound. Check the volume settings. Check if Mute mode is set “on”. Sound but no picture or black and white picture. If black and white picture first unplug TV from AC outlet and replug after 60 seconds. Check Color Setting if picture is black and white. Sound and picture distorted or appear wavy. An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes away, move appliance farther away from TV. Insert the power plug of the TV set into another power outlet. Sound and picture is blurry or cuts out momentarily. If using an external antenna, check the direction, position and connection of the antenna. Adjust the direction of your antenna or reset or fine tune the channel. Horizontal/vertical stripe on picture or picture is shaking. Check if there is interfering source nearby, such as appliance or electric tool. The plastic cabinet makes a “clicking” type of sound. “Click” sound can be caused when the room temperature changes. This change causes the television cabinet to inflate or contract, which makes the sound. This is normal and TV is OK. Black square appears in the center of my television screen? The Closed Caption function is set in the text mode. To remove it, access Closed Caption from the menu screen and change the Mode setting from text to either CC1 or off . 16 Other Information Trouble Shooting SYMPTOMS POSSIBLE SOLUTIONS On some channels getting another language or sometimes no sound at all. That would indicate that the MTS mode on your unit is set to SAP mode. We suggest setting the MTS mode to either Stereo or Mono . For further instruction, please see Audio Adjust or MTS/SAP in your user manual. SAP is Second Audio Program. It’s a second audio channel that is usually used for a second language or descriptive audio for the visually impaired. MTS stands for Multichannel Television Sound, a standard that allows the encoding of 3 channels of audio within a standard NTSC (analog) video signal to a television. A television that is able to receive MTS Stereo allows you to watch television with stereo sound. Not getting all of my cable channels on the television or I’m only getting 13 channels. Check the cable connection for an incoming signal. Make sure the signal is coming OK. Best way to confirm signal is to use another TV and/or contact your cable company. Reprogram your channels. Press [MENU] button on your TV remote control, change Input Source setting to “Cable”, then use “Auto Channels Search” to reprogram your channels. After switching to Cable, please auto program the channels. The TV will “remember” all the channels then the TV will allow you to surf the channels with [CH /V] buttons. [CH / V] don’t work when I set the Channel to Cable? They work with the Air setting? Confirm that TV still has power and is operational. Change the batteries in the remote control. Check if the batteries are correctly installed. Clean the front of the remote control (LED window). If using a universal remote, be sure to select the TV mode on the remote. If the remote still does not work: Remote control does not work. • Remove and reinstall the batteries correctly to reset the remote or install new batteries. • Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries you will need to reprogram the remote for the other units. Check if there is obstruction between the remote control and the TV. TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at this time, the camera should set on camera mode, not play mode). Observe the camera screen while pressing a button on the remote control; you should see flashing light on the screen. If there is no light observed, the remote control is not working. You need to repair or replace the remote control. 17
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51 Create Date : 2012:07:17 18:23:11+08:00 Metadata Date : 2012:07:17 18:23:40+08:00 Modify Date : 2012:07:17 18:23:40+08:00 Creator Tool : Adobe InDesign CS5.5 (7.5.1) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 5769 bytes, use -b option to extract), (Binary data 5881 bytes, use -b option to extract) Instance ID : uuid:3371bfab-aff3-4ed3-bac1-e18b1d6bb9f9 Original Document ID : xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A Document ID : xmp.did:645E6C67B0CFE111A66EB9AF662599B5 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:2E025DAB6B1AE1118638882CBCDE8A8A, xmp.iid:30025DAB6B1AE1118638882CBCDE8A8A, xmp.iid:31025DAB6B1AE1118638882CBCDE8A8A, xmp.iid:DE49BE5DFB1AE11195FFC9CD267ADB17, xmp.iid:E049BE5DFB1AE11195FFC9CD267ADB17, xmp.iid:E249BE5DFB1AE11195FFC9CD267ADB17, xmp.iid:56216967F21BE111B608921DED0D3E8B, xmp.iid:58216967F21BE111B608921DED0D3E8B, xmp.iid:5A216967F21BE111B608921DED0D3E8B, xmp.iid:5C216967F21BE111B608921DED0D3E8B, xmp.iid:5E216967F21BE111B608921DED0D3E8B, xmp.iid:0CBDE5B7B21CE111B3B3C9220CDAE440, xmp.iid:C1BCC2D0C71CE111BF228E28ECE39EC7, xmp.iid:C2BCC2D0C71CE111BF228E28ECE39EC7, xmp.iid:C4BCC2D0C71CE111BF228E28ECE39EC7, xmp.iid:F10BBD478E1DE111B473EE64AEC1ECCB, xmp.iid:D769CEA78420E1118284894038F48A76, xmp.iid:D969CEA78420E1118284894038F48A76, xmp.iid:AD593889A220E1118284894038F48A76, xmp.iid:08B7A5D12F22E1118315B6CE61A18130, xmp.iid:0AB7A5D12F22E1118315B6CE61A18130, xmp.iid:1AEC206F6C25E111AEF5AE9E3B087F01, xmp.iid:1CEC206F6C25E111AEF5AE9E3B087F01, xmp.iid:E01E204AFC25E111B5EEA5047C05D793, xmp.iid:E31E204AFC25E111B5EEA5047C05D793, xmp.iid:E61E204AFC25E111B5EEA5047C05D793, xmp.iid:1A128D079627E111909CA680E1D4F38F, xmp.iid:1D128D079627E111909CA680E1D4F38F, xmp.iid:20128D079627E111909CA680E1D4F38F, xmp.iid:14F54C31AD27E111909CA680E1D4F38F, xmp.iid:18F54C31AD27E111909CA680E1D4F38F, xmp.iid:BF3C04ABBE27E111909CA680E1D4F38F, xmp.iid:90C8D60F6028E11180099AAB6F925A49, xmp.iid:94C8D60F6028E11180099AAB6F925A49, xmp.iid:84ACA1AB7928E11180099AAB6F925A49, xmp.iid:87ACA1AB7928E11180099AAB6F925A49, xmp.iid:0C7F2F509428E11180099AAB6F925A49, xmp.iid:7F7EC63CF329E1119D91E438F83FA6A3, xmp.iid:827EC63CF329E1119D91E438F83FA6A3, xmp.iid:765C1077232AE111A04FC27367BD9D73, xmp.iid:3E7D15472A2AE111A8FFD83CFC029B51, xmp.iid:427D15472A2AE111A8FFD83CFC029B51, xmp.iid:E7322941A52AE1119EA4B5AD0214F017, xmp.iid:E8322941A52AE1119EA4B5AD0214F017, xmp.iid:E9322941A52AE1119EA4B5AD0214F017, xmp.iid:EA322941A52AE1119EA4B5AD0214F017, xmp.iid:ED322941A52AE1119EA4B5AD0214F017, xmp.iid:3508919AE72AE1119EA4B5AD0214F017, xmp.iid:3808919AE72AE1119EA4B5AD0214F017, xmp.iid:04015A6B852BE11195ABDFAB486D4424, xmp.iid:07015A6B852BE11195ABDFAB486D4424, xmp.iid:0A015A6B852BE11195ABDFAB486D4424, xmp.iid:0D015A6B852BE11195ABDFAB486D4424, xmp.iid:27BAA511AE2BE11195ABDFAB486D4424, xmp.iid:2ABAA511AE2BE11195ABDFAB486D4424, xmp.iid:3735F047902CE111B086C83571BD4C1F, xmp.iid:3A35F047902CE111B086C83571BD4C1F, xmp.iid:3D35F047902CE111B086C83571BD4C1F, xmp.iid:3E35F047902CE111B086C83571BD4C1F, xmp.iid:4223F499072DE11194D1D299BF446506, xmp.iid:4523F499072DE11194D1D299BF446506, xmp.iid:71FA74080A2DE1119074D2763EB43794, xmp.iid:66FF2D096033E111A15ABA97C95B0A1D, xmp.iid:69FF2D096033E111A15ABA97C95B0A1D, xmp.iid:6CFF2D096033E111A15ABA97C95B0A1D, xmp.iid:6FFF2D096033E111A15ABA97C95B0A1D, xmp.iid:A95F7462BD3CE111B156E7539F635E54, xmp.iid:AC5F7462BD3CE111B156E7539F635E54, xmp.iid:AF5F7462BD3CE111B156E7539F635E54, xmp.iid:B05F7462BD3CE111B156E7539F635E54, xmp.iid:359E9DD4E63CE111B127FEA7E299EAA1, xmp.iid:389E9DD4E63CE111B127FEA7E299EAA1, xmp.iid:9285D71CBC69E1118E5C869CA5277E25, xmp.iid:9585D71CBC69E1118E5C869CA5277E25, xmp.iid:9685D71CBC69E1118E5C869CA5277E25, xmp.iid:9985D71CBC69E1118E5C869CA5277E25, xmp.iid:C2463E35CB69E1118E5C869CA5277E25, xmp.iid:C5463E35CB69E1118E5C869CA5277E25, xmp.iid:C8463E35CB69E1118E5C869CA5277E25, xmp.iid:CB463E35CB69E1118E5C869CA5277E25, xmp.iid:683FE852D869E1118E5C869CA5277E25, xmp.iid:693FE852D869E1118E5C869CA5277E25, xmp.iid:6D3FE852D869E1118E5C869CA5277E25, xmp.iid:3E106615DC69E1118E5C869CA5277E25, xmp.iid:42106615DC69E1118E5C869CA5277E25, xmp.iid:F55DD29A016CE1119D18B9DEF2AC643B, xmp.iid:8F254C26026CE111A189865517D1E3A5, xmp.iid:90254C26026CE111A189865517D1E3A5, xmp.iid:94254C26026CE111A189865517D1E3A5, xmp.iid:E580E48D046CE111ABBCDB68E8BCD8CB, xmp.iid:395F255D066CE1119BDAA1776099ECD0, xmp.iid:B942A84A0A6CE11199DD8B71928A935D, xmp.iid:BD42A84A0A6CE11199DD8B71928A935D, xmp.iid:BE42A84A0A6CE11199DD8B71928A935D, xmp.iid:46246C5DE576E1118056B0F751B1582E, xmp.iid:4A246C5DE576E1118056B0F751B1582E, xmp.iid:388826CEEB76E1118056B0F751B1582E, xmp.iid:398826CEEB76E1118056B0F751B1582E, xmp.iid:3D8826CEEB76E1118056B0F751B1582E, xmp.iid:E85CEC83AB78E1118126821845886431, xmp.iid:EC5CEC83AB78E1118126821845886431, xmp.iid:ED5CEC83AB78E1118126821845886431, xmp.iid:1D51A1C34679E111A389DEE432D62789, xmp.iid:E643FC5B6079E111A389DEE432D62789, xmp.iid:16BA9CC36179E111A389DEE432D62789, xmp.iid:698286EB0282E111A65F9CD6B27BAB23, xmp.iid:6D8286EB0282E111A65F9CD6B27BAB23, xmp.iid:4C0F40132282E111A65F9CD6B27BAB23, xmp.iid:1B11BE037683E111B13ED14D8CCE4316, xmp.iid:C57AB26DF18DE111A6AEB200E8B1A361, xmp.iid:92AEA974B38EE111A5D3F9D42000CDC8, xmp.iid:5EFBFFF3B38EE111A5D3F9D42000CDC8, xmp.iid:1B5EED61B58EE111A5D3F9D42000CDC8, xmp.iid:0068E74FB78EE111A5D3F9D42000CDC8, xmp.iid:E5F2BA545E8FE111A7F5AA141E0ACD66, xmp.iid:F7ACAF536C8FE111A7F5AA141E0ACD66, xmp.iid:E242B33E6D8FE111A7F5AA141E0ACD66, xmp.iid:258F50A0758FE111A7F5AA141E0ACD66, xmp.iid:9AAAB0ED788FE111A7F5AA141E0ACD66, xmp.iid:53A54DC97C8FE111A7F5AA141E0ACD66, xmp.iid:9C33267D838FE111A7F5AA141E0ACD66, xmp.iid:2120EAAD1490E1118E19B4E555630189, xmp.iid:5EB309442590E1118E19B4E555630189, xmp.iid:381953AA2C90E1118E19B4E555630189, xmp.iid:BAC9C52B2D90E1118E19B4E555630189, xmp.iid:F2AA7DD42D90E1118E19B4E555630189, xmp.iid:5DBADD6D2F90E1118E19B4E555630189, xmp.iid:87C369AB3190E1118E19B4E555630189, xmp.iid:53B474BA3190E1118E19B4E555630189, xmp.iid:8B6A56293290E1118E19B4E555630189, xmp.iid:EDF14A893290E1118E19B4E555630189, xmp.iid:24C88D1D3690E1118E19B4E555630189, xmp.iid:BD389F563690E1118E19B4E555630189, xmp.iid:3797E6414C90E111A12681FFC24A0F4E, xmp.iid:FA1803922494E111991B8D8D039DBD49, xmp.iid:2E2740AD3294E111991B8D8D039DBD49, xmp.iid:74F3588B3A94E111991B8D8D039DBD49, xmp.iid:6C8D1DDB3A94E111991B8D8D039DBD49, xmp.iid:F8252A393B94E111991B8D8D039DBD49, xmp.iid:AF0CA5FBCD94E1119258D069E6B005E1, xmp.iid:2E7A91A7CF94E1119258D069E6B005E1, xmp.iid:2F7A91A7CF94E1119258D069E6B005E1, xmp.iid:A679BCDCD994E1119258D069E6B005E1, xmp.iid:6AD5B3F8D994E1119258D069E6B005E1, xmp.iid:6BD5B3F8D994E1119258D069E6B005E1, xmp.iid:ECC5DC18DF94E1119258D069E6B005E1, xmp.iid:88A538AAE094E1119258D069E6B005E1, xmp.iid:35D5B817E194E1119258D069E6B005E1, xmp.iid:CD519E2BE194E1119258D069E6B005E1, xmp.iid:518FB53FE194E1119258D069E6B005E1, xmp.iid:528FB53FE194E1119258D069E6B005E1, xmp.iid:538FB53FE194E1119258D069E6B005E1, xmp.iid:9513D724E494E1119258D069E6B005E1, xmp.iid:5E95A183E994E1119258D069E6B005E1, xmp.iid:BF0069CDEA94E1119258D069E6B005E1, xmp.iid:E6957C49EB94E1119258D069E6B005E1, xmp.iid:6BF677AEEB94E1119258D069E6B005E1, xmp.iid:FFE5A537EC94E1119258D069E6B005E1, xmp.iid:DF302F48F694E1119258D069E6B005E1, xmp.iid:50370096F794E1119258D069E6B005E1, xmp.iid:C875DDA3F794E1119258D069E6B005E1, xmp.iid:CDA724A6FA94E1119258D069E6B005E1, xmp.iid:B263D96CFB94E1119258D069E6B005E1, xmp.iid:8B5E1310FD94E1119258D069E6B005E1, xmp.iid:2F97A21EFF94E1119258D069E6B005E1, xmp.iid:8BD6172EFF94E1119258D069E6B005E1, xmp.iid:8CD6172EFF94E1119258D069E6B005E1, xmp.iid:8DD6172EFF94E1119258D069E6B005E1, xmp.iid:C45EBA980095E1119258D069E6B005E1, xmp.iid:C55EBA980095E1119258D069E6B005E1, xmp.iid:181AC5E30495E1119258D069E6B005E1, xmp.iid:AB08C4650595E1119258D069E6B005E1, xmp.iid:2FF1F5020695E1119258D069E6B005E1, xmp.iid:C1A63692AD95E1118EB6BB74FADCFA99, xmp.iid:393616A9AD95E1118EB6BB74FADCFA99, xmp.iid:636FF6EDAE95E1118EB6BB74FADCFA99, xmp.iid:1EDBF9A3B095E1118EB6BB74FADCFA99, xmp.iid:2F20D537B195E1118EB6BB74FADCFA99, xmp.iid:A395A04DB395E1118EB6BB74FADCFA99, xmp.iid:37B2065FB395E1118EB6BB74FADCFA99, xmp.iid:5BF6256AB495E1118EB6BB74FADCFA99, xmp.iid:08DAC7EAB695E1118EB6BB74FADCFA99, xmp.iid:90F51E32B995E1118EB6BB74FADCFA99, xmp.iid:8B136248B995E1118EB6BB74FADCFA99, xmp.iid:B868A151B995E1118EB6BB74FADCFA99, xmp.iid:B968A151B995E1118EB6BB74FADCFA99, xmp.iid:2261521FBB95E1118EB6BB74FADCFA99, xmp.iid:2361521FBB95E1118EB6BB74FADCFA99, xmp.iid:2461521FBB95E1118EB6BB74FADCFA99, xmp.iid:9C27AFA1C095E1118EB6BB74FADCFA99, xmp.iid:B0FD56E6C095E1118EB6BB74FADCFA99, xmp.iid:2693E23FC195E1118EB6BB74FADCFA99, xmp.iid:53F429F7C295E1118EB6BB74FADCFA99, xmp.iid:5F54F311C395E1118EB6BB74FADCFA99, xmp.iid:F8F846B9C895E1118EB6BB74FADCFA99, xmp.iid:5CE3D809C995E1118EB6BB74FADCFA99, xmp.iid:AFF2DD16CB95E1118EB6BB74FADCFA99, xmp.iid:CEFB7A79CB95E1118EB6BB74FADCFA99, xmp.iid:402DAC9FCB95E1118EB6BB74FADCFA99, xmp.iid:412DAC9FCB95E1118EB6BB74FADCFA99, xmp.iid:422DAC9FCB95E1118EB6BB74FADCFA99, xmp.iid:86FAAF9DCE95E1118EB6BB74FADCFA99, xmp.iid:F43FEA9CD495E111A491B4AF4028E8F6, xmp.iid:F3E795BED495E111A491B4AF4028E8F6, xmp.iid:F4E795BED495E111A491B4AF4028E8F6, xmp.iid:08FCAE98EA97E111AD30B958CEC376CD, xmp.iid:09FCAE98EA97E111AD30B958CEC376CD, xmp.iid:EA30B471F497E111AD30B958CEC376CD, xmp.iid:7A534E86E298E111B939F1D64DB1338F, xmp.iid:7B534E86E298E111B939F1D64DB1338F, xmp.iid:7C534E86E298E111B939F1D64DB1338F, xmp.iid:7ECB706D8499E1118C98A2EE9E622296, xmp.iid:C139EF8A8499E1118C98A2EE9E622296, xmp.iid:AAE4FF8A8499E1118C98A2EE9E622296, xmp.iid:34C2F692CAA0E111BC18B3E654553CAA, xmp.iid:B2FE3D2982A5E11184FAB2731ACBF9A4, xmp.iid:6A741FAB88A5E11184FAB2731ACBF9A4, xmp.iid:D7075C3CB1CFE111A66EB9AF662599B5, xmp.iid:D8075C3CB1CFE111A66EB9AF662599B5, xmp.iid:CCBFED8BB6CFE111A66EB9AF662599B5, xmp.iid:5B72D54BF9CFE111A66EB9AF662599B5 History When : 2011:11:29 18:04:21+08:00, 2011:11:29 19:54:54+08:00, 2011:11:29 19:54:54+08:00, 2011:11:30 10:31:10+08:00, 2011:11:30 10:31:11+08:00, 2011:11:30 13:44:58+08:00, 2011:12:01 15:59:32+08:00, 2011:12:01 15:59:32+08:00, 2011:12:01 17:09:12+08:00, 2011:12:01 17:37:48+08:00, 2011:12:01 17:48:39+08:00, 2011:12:02 14:56:11+08:00, 2011:12:02 17:27:12+08:00, 2011:12:02 17:27:12+08:00, 2011:12:02 19:05:44+08:00, 2011:12:03 17:07:52+08:00, 2011:12:07 11:36:32+08:00, 2011:12:07 11:36:32+08:00, 2011:12:07 17:10:24+08:00, 2011:12:09 14:34:17+08:00, 2011:12:09 14:34:17+08:00, 2011:12:13 17:25:44+08:00, 2011:12:13 17:25:44+08:00, 2011:12:14 10:35:30+08:00, 2011:12:14 11:37:27+08:00, 2011:12:14 15:32:15+08:00, 2011:12:16 11:28:32+08:00, 2011:12:16 11:28:32+08:00, 2011:12:16 11:38:14+08:00, 2011:12:16 14:14:20+08:00, 2011:12:16 16:03:30+08:00, 2011:12:16 19:21:17+08:00, 2011:12:17 11:34:44+08:00, 2011:12:17 11:34:44+08:00, 2011:12:17 14:38:03+08:00, 2011:12:17 16:40:34+08:00, 2011:12:17 17:48:46+08:00, 2011:12:19 11:40:47+08:00, 2011:12:19 11:40:47+08:00, 2011:12:19 17:26+08:00, 2011:12:19 18:14:46+08:00, 2011:12:19 18:31:16+08:00, 2011:12:20 08:55:04+08:00, 2011:12:20 08:55:57+08:00, 2011:12:20 13:01:29+08:00, 2011:12:20 13:01:30+08:00, 2011:12:20 14:56:16+08:00, 2011:12:20 16:50:01+08:00, 2011:12:20 18:14:09+08:00, 2011:12:21 11:39:42+08:00, 2011:12:21 11:39:42+08:00, 2011:12:21 13:22:12+08:00, 2011:12:21 16:01:08+08:00, 2011:12:21 16:30:41+08:00, 2011:12:21 16:50+08:00, 2011:12:22 19:29:59+08:00, 2011:12:22 19:29:59+08:00, 2011:12:22 19:32:24+08:00, 2011:12:22 19:33:48+08:00, 2011:12:23 09:44:06+08:00, 2011:12:23 09:44:06+08:00, 2011:12:23 10:01:31+08:00, 2011:12:31 11:32:16+08:00, 2011:12:31 11:32:16+08:00, 2011:12:31 13:32:34+08:00, 2011:12:31 13:37:04+08:00, 2012:01:12 09:33:09+08:00, 2012:01:12 09:33:09+08:00, 2012:01:12 09:33:31+08:00, 2012:01:12 09:36:32+08:00, 2012:01:12 14:29:50+08:00, 2012:01:12 14:29:50+08:00, 2012:03:09 15:47:25+08:00, 2012:03:09 15:47:25+08:00, 2012:03:09 16:29:41+08:00, 2012:03:09 17:25:25+08:00, 2012:03:09 17:35:29+08:00, 2012:03:09 17:40:31+08:00, 2012:03:09 18:43:53+08:00, 2012:03:09 18:52:22+08:00, 2012:03:09 19:09:22+08:00, 2012:03:09 19:15:41+08:00, 2012:03:09 19:25:49+08:00, 2012:03:09 19:36:17+08:00, 2012:03:09 19:39:12+08:00, 2012:03:12 13:09:54+08:00, 2012:03:12 13:13:48+08:00, 2012:03:12 13:17:26+08:00, 2012:03:12 13:29:56+08:00, 2012:03:12 13:31:01+08:00, 2012:03:12 13:43:58+08:00, 2012:03:12 14:12:05+08:00, 2012:03:12 14:15:01+08:00, 2012:03:12 14:15:23+08:00, 2012:03:26 09:45:28+08:00, 2012:03:26 10:08:47+08:00, 2012:03:26 10:31:34+08:00, 2012:03:26 11:08:57+08:00, 2012:03:26 13:40:59+08:00, 2012:03:28 15:56:24+08:00, 2012:03:28 15:56:53+08:00, 2012:03:28 16:53:08+08:00, 2012:03:29 10:27:43+08:00, 2012:03:29 13:40:03+08:00, 2012:03:29 13:40:59+08:00, 2012:04:09 13:14:45+08:00, 2012:04:09 13:14:45+08:00, 2012:04:09 17:35:54+08:00, 2012:04:11 09:31:09+08:00, 2012:04:24 17:39:46+08:00, 2012:04:25 16:48:40+08:00, 2012:04:25 16:52:14+08:00, 2012:04:25 17:02:28+08:00, 2012:04:25 17:16:16+08:00, 2012:04:26 13:11:50+08:00, 2012:04:26 14:52:02+08:00, 2012:04:26 14:58:36+08:00, 2012:04:26 15:58:36+08:00, 2012:04:26 16:22:14+08:00, 2012:04:26 16:49:51+08:00, 2012:04:26 17:37:50+08:00, 2012:04:27 10:57:08+08:00, 2012:04:27 12:55:52+08:00, 2012:04:27 13:48:50+08:00, 2012:04:27 13:52:28+08:00, 2012:04:27 13:57:11+08:00, 2012:04:27 14:08:37+08:00, 2012:04:27 14:24:40+08:00, 2012:04:27 14:25:05+08:00, 2012:04:27 14:28:11+08:00, 2012:04:27 14:30:52+08:00, 2012:04:27 14:56:29+08:00, 2012:04:27 14:58:05+08:00, 2012:04:27 17:34:59+08:00, 2012:05:02 15:00:58+08:00, 2012:05:02 16:41:57+08:00, 2012:05:02 17:38:16+08:00, 2012:05:02 17:40:30+08:00, 2012:05:02 17:43:08+08:00, 2012:05:03 11:13:40+08:00, 2012:05:03 11:25:38+08:00, 2012:05:03 12:32:45+08:00, 2012:05:03 12:38:43+08:00, 2012:05:03 12:39:29+08:00, 2012:05:03 13:15:08+08:00, 2012:05:03 13:16:11+08:00, 2012:05:03 13:27:24+08:00, 2012:05:03 13:30:28+08:00, 2012:05:03 13:31:01+08:00, 2012:05:03 13:31:35+08:00, 2012:05:03 13:32:02+08:00, 2012:05:03 13:35:48+08:00, 2012:05:03 13:52:18+08:00, 2012:05:03 14:30:45+08:00, 2012:05:03 14:39:58+08:00, 2012:05:03 14:43:26+08:00, 2012:05:03 14:46:16+08:00, 2012:05:03 14:50:06+08:00, 2012:05:03 16:02:09+08:00, 2012:05:03 16:11:29+08:00, 2012:05:03 16:11:52+08:00, 2012:05:03 16:33:24+08:00, 2012:05:03 16:38:58+08:00, 2012:05:03 16:50:41+08:00, 2012:05:03 17:05:24+08:00, 2012:05:03 17:05:50+08:00, 2012:05:03 17:07:24+08:00, 2012:05:03 17:15:45+08:00, 2012:05:03 17:15:59+08:00, 2012:05:03 17:19:13+08:00, 2012:05:03 17:46:43+08:00, 2012:05:03 17:50:21+08:00, 2012:05:03 17:54:45+08:00, 2012:05:04 13:54:11+08:00, 2012:05:04 13:54:49+08:00, 2012:05:04 14:03:54+08:00, 2012:05:04 14:16:09+08:00, 2012:05:04 14:20:17+08:00, 2012:05:04 14:35:13+08:00, 2012:05:04 14:35:42+08:00, 2012:05:04 14:43:10+08:00, 2012:05:04 15:01:05+08:00, 2012:05:04 15:17:24+08:00, 2012:05:04 15:18:01+08:00, 2012:05:04 15:18:16+08:00, 2012:05:04 15:29:53+08:00, 2012:05:04 15:31:11+08:00, 2012:05:04 15:31:41+08:00, 2012:05:04 15:33:50+08:00, 2012:05:04 16:10:37+08:00, 2012:05:04 16:12:32+08:00, 2012:05:04 16:15:03+08:00, 2012:05:04 16:27:20+08:00, 2012:05:04 16:28:05+08:00, 2012:05:04 17:08:33+08:00, 2012:05:04 17:10:48+08:00, 2012:05:04 17:25:29+08:00, 2012:05:04 17:28:14+08:00, 2012:05:04 17:29:18+08:00, 2012:05:04 17:30:34+08:00, 2012:05:04 17:45:55+08:00, 2012:05:04 17:50:43+08:00, 2012:05:04 18:33:39+08:00, 2012:05:04 18:34:36+08:00, 2012:05:04 18:39:48+08:00, 2012:05:07 10:16:04+08:00, 2012:05:07 10:16:04+08:00, 2012:05:07 11:26:33+08:00, 2012:05:08 15:50:48+08:00, 2012:05:08 15:51:17+08:00, 2012:05:08 15:51:17+08:00, 2012:05:09 11:09:44+08:00, 2012:05:09 11:10:34+08:00, 2012:05:09 11:10:34+08:00, 2012:05:18 17:19:30+08:00, 2012:05:24 18:10:20+08:00, 2012:05:24 18:10:20+08:00, 2012:07:17 09:46:32+08:00, 2012:07:17 09:46:32+08:00, 2012:07:17 10:24:33+08:00, 2012:07:17 18:22:22+08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /, /metadata, /, /, /metadata, /, /, /metadata, /, /, /metadata, /, /;/metadata, /metadata, /;/metadata, /;/metadata Derived From Instance ID : xmp.iid:B2FE3D2982A5E11184FAB2731ACBF9A4 Derived From Document ID : xmp.did:AAE4FF8A8499E1118C98A2EE9E622296 Derived From Original Document ID: xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A Derived From Rendition Class : default Doc Change Count : 25 Key Stamp Mp : AAAAAA== Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 23 Creator : Adobe InDesign CS5.5 (7.5.1)EXIF Metadata provided by EXIF.tools