Hisense Electric LCDD0035 LED LCD TV User Manual 32K366W Hisense QSG 2013 4 3
Hisense Electric Co., Ltd. LED LCD TV 32K366W Hisense QSG 2013 4 3
Contents
- 1. W9HLCDD0035_ User Manual 1(P1-8)
- 2. W9HLCDD0035_ User Manual 1(P9-16)
- 3. W9HLCDD0035_ User Manual 1(P17-25)
- 4. W9HLCDD0035_ User Manual 2
W9HLCDD0035_ User Manual 2
CY-G Barcode 35*10.5mm BEST (HDMI) BUTTONS AND CONNECTORS Ridge Groove Stand column Back View Align the front of the stand column with the front of the base, then insert the stand column into the base making sure that the groove in the stand column aligns with the ridge in the base. Secure the stand column to the base with 3 Screws A (M5 x 12) . Align the stand cover with the stand column, then secure the stand cover to the stand column with 1 Screw A (M5 x 12) . Make sure that the bottom of the stand cover is flush against the top of the stand column. NOTES Product image is only for reference, actual product may vary in appearance. Carefully place your TV facedown on a soft, cushioned surface to prevent damage to the TV or scratching to the screen. 4 REMOTE CONTROL Infra-red transmitter Power on/off Select input source Select TV / AV / VGA / USB source Select picture mode Select component source Select sound mode Zoom button Display favorite list Audio select button Mono/Stereo/SAP operation Select HDMI source Secure the stand to the TV with the 4 Screws A (M5 x 12). MENU button MENU Display the on-screen menu to setup your TV’s features. INPUT Select the different input signal sources. VOL+/- Adjust the volume. CH Select the channel. Close the menu If you want to attach the TV to a wall-mount bracket(not provided), you should first remove the stand if it is pre-attached . Display the information banner MUTE button Next channel Increase volume Decrease volume 1. If you want to attach the TV to a wall-mount bracket (not provided), you should first remove the stand if it is pre-attached. Make sure the TV is laid face-down on a clean, safe, and cushioned surface. Previous channel Display the channel name Direct channel selection ANT/CABLE Connect an antenna or cable TV to this jack. HDMI HDMI (High-Definition Multimedia Interface) provides an uncompressed, all digital audio/video interface between this TV and any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V receiver. COMPONENT IN Connect to a DVD player, Digital Set-Top-Box, or other A/V devices with component (YPBPR) video and audio output jacks. AV IN Connect to the composite video and audio (L/R) output jacks on external video devices. VGA PC/DVI AUDIO IN Connect to a PC or other devices with a VGA or DVI interface. DIGITAL AUDIO OUT Connect an audio amplifier to this jack. USB Port for Digital Media Player and for software update. COMPONENT IN DIGITAL AUDIO OUT TV CONNECTORS Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. VHF/UHF Antenna OR Set the sleep timer OR Bracket (1.5~2.5 mm) Cable ANT OUT CHANGE THE BATTERIES Spacer × 4 Screw B WARNING USB DC 5V 0.5A(MAX) To prevent internal damage to the TV and ensure the TV is mounted securely, use only the 4 screws in the Screw B pack. Gently push and slide Insert the batteries Gently push and slide Mobile Hard Disk Return EXIT Exit Setting Time Zone: Select the local time zone according to your region. Setting the Time: Press [ / ] to select the number you want to set and press [ / ] to set. Choose Your TV Source Home Mode Antenna Retail Mode Cable Enter Select MENU Return EXIT Exit ENTER Enter Select MENU Return EXIT Exit Select if using an antenna for standard or HD TV Press [ / ] to select your Picture Mode: Home Mode or Retail Mode, press [ENTER] button to confirm. If you select Retail Mode, a message appears “ Are you sure you want retail mode?” Select “Yes” to continue, or select “No” to change your selection. For energy saving, we kindly suggest you select the Home Mode. Press [▲/▼] to select your TV Source: Antenna or Cable, press [ENTER] button to confirm. If you press [EXIT] to exit the scanning, a message appears “Please Run Channel Auto Scan”, you should scan channels from the menu of Channels Note: If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels. HELP TOPICS When there is something wrong with your TV, you can try turning off the TV and restarting it. You can also refer to the following chart for problem and solution tips. POSSIBLE SOLUTIONS • Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity. • Attempt to power on unit using the power button on both the TV and the Remote. Picture is normal, but no sound • Check the volume settings. • Check if Mute mode is set "on" . 42A300/42A320 I have connected an external source to my TV and I get no picture and/or sound. • Check for the correct output connection on the external source and for the correct input connection on the TV. • Make sure you have made the correct selection for the input mode for the incoming signal. Width: 37.59 inches (954.8 mm) Without Stand Height: 22.13 inches (562 mm) Depth: 2.36 inches (59.9 mm) Sound but no picture or black and white picture. • If black and white picture first unplug TV from AC outlet and replug after 60 seconds. • Check Color Setting if picture is black and white. Sound and picture distorted or appear wavy. • An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes away, move appliance farther away from TV. • Insert the power plug of the TV set into another power outlet. Sound and picture is blurry or cuts out momentarily. • If using an external antenna, check the direction, position and connection of the antenna. • Adjust the direction of your antenna or reset or fine tune the channel. [CH / V] don’t work when I set the Channel to Cable? They work with the Air setting? • After switching to Cable, please auto program the channels. The TV will “remember” all the channels then the TV will allow you to surf the channels with [CH /V] buttons. With Stand Width: 37.59 inches (954.8 mm) Height: 24.48 inches (621.8 mm) Depth: 8.86 inches (225 mm) Without Stand 25.8 lbs (11.7 kg) With Stand LCD Panel Minimum size (diagonal) Screen resolution Audio power Power supply Analog Receiving systems Digital Tuner type USB Connect a USB device for browsing photos and movies. MENU No sound or picture Receiving channels 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+)and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. OR SPECIFICATIONS Weight Select TV Source SYMPTOMS AUDIO OUT/ Dimension Enter If Automatic, options are automatically set by TV source Reduces total power consumption HEADPHONE Connect Headphone for audio out of the TV. Model Name ENTER ► ◄ L AUDIO R PR PB audio system. Go to the previous channel Media content control function buttons DIGITAL AUDIO OUT Connect an optical cable from an external digital Connect headphone or analog sound system using RCA Y-cable (1/8"-stereo mini to L/R phono-not provided). Time Exit Off 2012 January 01 01:10 AM Home mode default settings are recommended for in-home use. ENERGY STAR@ qualified.Retail mode is intended for in-store display and resets video settings at Power On. VGA & VGA AUDIO Connect a VGA cable and an audio cable from the PC. Turn on the TV or put the TV in standby mode. Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power. EXIT Choose Your Picture Mode ENTER ANT Connect an outdoor VHF/UHF antenna. Dash button Select a digital sub-channel VIDEO HDMI 1/ARC Move Up/Down/Left/Right or adjust settings INSTALLING A WALL-MOUNT BRACKET 2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV with the 4 screws in the Screw B pack. PB PR COMPONENT IN Description /AUDIO OUT Media content control function buttons Used when Roku Streaming Stick connected Item (Power button) Used when Roku Streaming Stick connected DIGITAL USB /AUDIO AUDIO OUT DC 5V 0.5A(MAX) OUT L -AUDIO- R COMPONENT IN M6 Adjust closed caption mode VIDEO Follow instructions provided with the Wall-Mount bracket. • If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect assembly. • Be sure to use the provider spacers between the TV and the bracket when attaching the mount. Stand cover AV IN Return ► ◄ Wall-Mount screw size (mm) AC power cord VGA Follow the illustrations below to complete the installation steps. 200 × 200 MENU Picture Mode PC/DVI AUDIO IN Wall-Mount hole pattern VESA (mm) L AUDIO R INSTALLING THE STAND Select Set menu language to English,Français, or Español PC IN Spacer Enter Connect your TV’s power cord to a power outlet, then press power. The initial setup screen opens. Press [ / ] button to select your language, press [ENTER] button to confirm. GOOD (AV) PR Screw the TV’s rear cover AV IN VGA PC IN CH CH AV IN Wall-mount Bracket PB Batteries: AAA × 2 VOL - ENTER VIDEO Spacer × 4 Screw B (M6 × 30) × 4 VOL+ HDMI2/MHL HDMI3 ANT/CABLE Screw A (M5 × 12) × 8 Screws B 9.5~12.5 mm English Français Español BETTER (COMP) Auto ▲ Warranty card Choose Your Time Setting Mode Time Zone Daylight Savings Year Month Day Choose Your Menu Language 29.1 lbs (13.2 kg) 41.6 inches 1920 × 1080 7W+7W 120 V ~ 60 Hz NTSC ATSC / QAM VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125 Digital Terrestrial Broadcast (8VSB): 2 ~ 69 Digital cable (64/256 QAM): 1 ~ 135 Frequency synthesized Environmental conditions Temperature: 41°F ~ 95°F (5°C ~ 35°C) Humidity: 20% ~ 80% RH Atmospheric pressure: 86 kPa ~ 106 kPa Component Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080P/60Hz VGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz) HDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768) YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080P) Remote Control Quick Setup Guide INPUT PC/DVI AUDIO IN MENU Time Setting ▲ Video Effect: ACCESSORIES LIST User Manual Menu Language external A/V equipment. TURNING THE TV ON FOR THE FIRST TIME Remote control does not work. 42A300/42A320 ► ◄ HDMI / COMP / AV Connect an HDMI cable or Comp/AV Adapter from an • Confirm that TV still has power and is operational. • Change the batteries in the remote control. • Check if the batteries are correctly installed. • Clean the front of the remote control (LED window). • If using a universal remote, be sure to select the TV mode on the remote. • If the remote still does not work: -Remove and reinstall the batteries correctly to reset the remote or install new batteries. -Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries you will need to reprogram the remote for the other units. • Check if there is obstruction between the remote control and the TV. TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at this time, the camera should set on camera mode, not play mode). Observe the camera screen while pressing a button on the remote control; you should see flashing light on the screen. If there is no light observed, the remote control is not working. You need to repair or replace the remote control.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : 32K366W 北美 Hisense QSG 2013-4-3 Metadata Date : 2013:10:16 15:31:48+08:00 Modify Date : 2013:10:16 15:31:48+08:00 Create Date : 2013:10:14 15:15:11+08:00 Creator Tool : Adobe Illustrator CS6 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 128 Thumbnail Format : JPEG Thumbnail Image : (Binary data 18367 bytes, use -b option to extract) Instance ID : uuid:4a352388-4705-604a-af9d-bf49793a8119 Document ID : xmp.did:008011740720681183D1BB5A966F3169 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:0829ae88-e086-4efe-a7df-b5fe2cf09f92 Derived From Document ID : xmp.did:BCD664080FA0E211A54BD882397E327B Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:23383BFEA441DD11A6AECB58D53C8B28, xmp.iid:086F577ABE41DD11A6AECB58D53C8B28, xmp.iid:AB13E98E200911689FE8CB9EA85C5459, xmp.iid:93D9A2DF7848DD11BB47877F8DDF9079, xmp.iid:FA7F117407206811B34B80FC905F8DB1, xmp.iid:F77F11740720681197A5C6DA8C2593EE, xmp.iid:008011740720681183D1BB5A966F3169 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2008:06:24 14:13:53+08:00, 2008:06:24 15:23:44+08:00, 2008:06:26 06:03:48-07:00, 2008:07:02 13:54:27-07:00, 2008:07:21 16:58:31+05:30, 2008:09:05 03:21:29-07:00, 2013:10:14 15:15:12+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS6 (Macintosh) History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 840.000062 Max Page Size H : 419.999859 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT, TitilliumMaps29L-800wt, MyriadPro-SemiboldCond, MyriadPro-BoldCond, MyriadPro-BoldCondIt, MyriadPro-Regular, MyriadPro-Bold, MyriadPro-BoldIt, MyriadPro-Black, MyriadPro-BlackIt, Tahoma, AdobeSongStd-Light, TitilliumText25L-400wt Font Family : Arial, Arial, TitilliumMaps29L 800wt, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Tahoma, Adobe 宋体 Std, TitilliumText25L 400wt Font Face : Regular, Bold, 800wt, Semibold Condensed, Bold Condensed, Bold Condensed Italic, Regular, Bold, Bold Italic, Black, Black Italic, Regular, L, 400wt Font Type : Open Type, Open Type, Unknown, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown Font Version : Version 5.06, Version 3.00, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.006;PS 002.000;Core 1.0.38;makeotf.lib1.6.6565, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 3.15, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : arial_0.ttf, ARIALBD.TTF, MyriadPro-Regular.otf, MyriadPro-SemiboldCond.otf, MyriadPro-BoldCond.otf, MyriadPro-BoldCondIt.otf, MyriadPro-Regular.otf, MyriadPro-Bold.otf, MyriadPro-BoldIt.otf, MyriadPro-Black.otf, MyriadPro-BlackIt.otf, tahoma.ttf, AdobeSo0.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Yellow C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 鲜艳 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.00 Page Count : 1 Creator : Adobe Illustrator(R) 16.0 For : songjinxiu, Bounding Box : -2382 -2 0 1191 Container Version : 11 Creator Version : 16EXIF Metadata provided by EXIF.tools