Hisense Electric LCDD0040 Part15 Subpart B-LED LCD TV User Manual ES G132903

Download:
Mirror Download [FCC.gov]
Document ID	2216749
Application ID	FK/YrbN6jwxcTXHIizuZiw==
Document Description	W9HLCDD0040_User Manual 1(P16-24)
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	331.05kB (4138066 bits)
Date Submitted	2014-03-16 00:00:00
Date Available	2014-03-18 00:00:00
Creation Date	2014-02-27 14:11:37
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2014-02-27 14:11:44
Document Title	ES-G132903Ó¢ÎÄ
Document Creator	CorelDRAW Version 9.397
Document Author:	΢ÈíÓû§

I;
Using the Audio Menu
Auto Volume Continl
TV Speakers
Advanced Audio
Reset Audio Settings
W 1- ,. lJir‘
Adlust settln s to affect sound quality
You can adjust:
Sound Mode - Select the Sound Mode: Standard, Theater,
Music, Speech or Custom.
Balance -Adjust the volume of the left and right speakers,
Equalizer - Soften or enhance the sound at specific
frequency points.
Auto Volume Control , Automatically adjusts volume to a
consistent level, attenuates loud passages
TV Speakers - Selects where to play TV audio. You
can select On (default selling) to play audio through TV
speakers. or select Off to play audio through the speakers
on an external audio system.
Advanced Audio , Access Advanced Audio settings such as
Digital Audio Out, MTS/SAP, Audio Language
Stereo.
English 9
MTSi‘SAP
Audio Language
Digital Audio Out: Send digital audio to an external
audio system. You can select PCM or RAW.
, PCM: PCM outputs two channel audio regardless of
the input format.
c RAW: When the data stream carries Dolby signal,
digital SPDIF outputs Dolby data stream, When the
data stream carries no Dolby signal, it transports PCM
data stream.
MTSISAP (Analog channels only): Select the default
audio stream. you can select Mono. Stereo or SAP
(Second Audio Program).
’ Mono: Select this option if there is noise or static on
Weak stereo broadcasts.
“ Stereo: Select this option for programs broadcast in
stereo
’ SAP: Depending on the particular program being
broadcast. you can listen to a foreign-language
translation.
Audio Language (Digital channels only) - Change the
default value for audio language.
Reset Audio Settings - Resets all audio settings to the
factory defaults
Using the Channels Menu
Antenna 4}
runei mode.
Auto Channel ‘earch
Channel Skip
Favorite List
Channel Labels
ATOSVI p
signal Strength >
Audio 0an on»
ma. , w w is Eat
You can adjust:
Tuner Mode - Select the TV signal source You can select
Antenna or Cable
Auto Channel Search - Scans for channels that have
signals and stores the channels information in memory.
Scanning for Channels
Antenna
Siam. canning
Digital ciiaiiii n
Analog nnnels l)
_4 i
Digital Channels: The scanned TV program in digital
signals.
Analog Channels: The scanned TV program in analog
signals
Channel Skip - You can hide channels in the channel list.
Press [A/V] to select the channels you want to hide and
press [ENTER] to confirm.
l lSArATDSJ
D 17
l l29
D45
Manual add and 5le channels in your pi ran
t? NOTE
When you press [CH NV] (or [CH +/s]) button, your
TV skips the hidden channels You can still tune to the
channel by pressing the number buttons on the remote
control.
Favorite List - Display your Favorite List. You can add or
delete channels to create your favorite list
'7‘ Favorite List
p l lfirerTDSA
yI Dsrermsrz
l’l
l lemme.»
Dl7
3 ll29
‘, 45
'w B
m. Eris, . r." at
Add Lharlnels tU i rsete a rewrite list
Channel Labels - Change the channel name. Press []
to select the character you want to change. then press [A/V]
to set the character.
Signal Strength (Digital channels only)- You can check the
digital signal strength to determine if you need to adlust your
antenna or digital cable input.
Audio Only - Listen to the program audio only. when you
turn off the picture on yourTV.
E NOTES
’ Audio Only works only when the input source is TV. and
yourTV is receiving a broadcast signal
’ To exit audio only mode. press any button. When you exit
audio only mode, the Audio Only option is automatically
reset to OH.
Using the Settings Menu
Settings
cased Cap on >
Time V
Menu Language
inptit Labels
Englisn 4»
You can adjust:
Closed Caption - Adjust Closed Caption settings.
Closed Caption: To select CC Off (turns off closed
caption). CC On (turns on closed caption). or CC on when
Mute (turns on closed caption when the sound is muted).
4t
cci 4t
Servicet 4}
Analog Caption
Digital Caption
Digital Caption settings >
A ed ptlunln setting
Analog Captio . Select an Analog Caption setting from
cct~c04, TEXT1~TEXT4. Off.
Digital Caption: Select a Digital Caption setting.
Service1~Service6. Off
Digital Caption Settings: There are two Caption Styles.
One is the automatic function set as the broadcaster.
while the other is the custom style where you can adlust
the font Size. color. opacity. background color etc
Time - Access Time settings such as Time Zone. Date/Time.
Sleep Timer.
Daylight sayings
Dateninie
Sleep Timer
Time Zone: Select your local time Zone: Pacific. Alaska.
Hawaii. Newfoundland. Atlantic, Eastern. Central and
Mountain.
Daylight Savings:Press [A/V] to highlight Daylight
Savings. then press [] to select On (it your viewmg
area observes Daylight Savings Time) or off (if your
viewing area does not observe Daylight Savings Time).
Date/Time: You can set time manually or select automatic
if the TV is connected to an antenna or cable source.
’ Auto synchronization: Select Manual (to set the date
and time manually) or Auto (to set the date and time
automatically from a TV signal source based on the
time zone you select),
it you selected Manual. set the followmg options.
“ Date: Set the Current year/month/day
” Time: Set the current time.
Sleep Timer: Specify the amount of time before your TV
automatically turns off.
Menu Language - You can select the menus language to
English. Spanish or French.
Input Labels - Press [A/V] to select the input source you
want to label, then press [V] to move to the custom label
field and then press [A/V] to select the character you want.
When you have completed the label, The next time you
press INPUT, your label Wlll appear in the Input source list.
CEC Function- CEC Function lets you control HDMI CEC-
cornpatible devices connected to the HDMI jacks on your
TV using the remote control that came With your TV, To use
CEC Function, you must set the CEC Control setting to On.
CEC Function
Device Auto Power on
TV Auto Power On
Audio Recelver
cEc Device List
” HDMl cables must be used to connect HDMI CEC-
compatible devices to your TV.
’ The Connected device's HDMI CEC feature must be
turned on
r If you connect an HDMI device that is not HDMI CEC-
compatible, all the CEC Control features do not work
" Depending on the connected HDMI device, the CEC
Control feature may not work
CEC Control: Turning CEC Function on or off.
Device Auto Power Off: When HDMl-CEC is turned on,
Device Auto Power Off turns off HDMI CEC devices when
you turn off your TV.
TV Auto Power On: When CEO is turned on and you
turn on an HDMI CEC deVice, TVAuto Power On turns on
your TV automatically
Audio Receiver: When CEO is turned on and you have
connected an audio receiver to your TV, turning on Audio
Receiver lets you use your TV‘s remote control to control
the volume on the audio receiver.
CEC Device Lists. You can display a list of HDMI CEC
devices that are connected to your TV and select the
source you want.
Connect: Connect to the current CEC devices .
Root Menu: You can open an CECrcompatible device's
root menu, then use your TV's remote control to control
the deVice
Power LED - To turn on or off the standby indicatior.
Component Settings (Only available in Component
mode.) - You can adjust the horizontal distortion that may
occur when watching Video from a component video dewce
ll
Phase: Minimizes horizontal distortion.
Reset Component Settings: Resets all component video
settings to factory rnode.
Version Info - Display the software version information,
Reset to Default - Every TV has its original setting before
leaving the factory. This function can help you restore these
settings.
Using the Parental Controls Menu
When you first use this function, the default password is
[0000]. Once you input this password you can set options,
Pare al Controls
Block Unrated TV
USA Parental Locks
Canadian Parental Locks
Change Password
Open VrCrllp
Reset Parental Cuntrol Settings
Clean All
, were, H mm
Lu.k n tinii tttutxittti
,/'\
If
You can adjust:
Button Lock - Block or unblock the button of the TV.
Block Unrated TV - Block unrated TV programs.
USA Parental Locks - Restrict movie and TV programs for
USA Ratings
Canadian Parental Locks - Restrict movie and TV
programs for Canadian Ratings.
Change Password - If you Want to change the default
password, first enter the new password then enter the same
password again,
Open V-Chip - Display an advanced V-Chip ratings table for
digital channels (USA only).
Reset Parental Control Settings - Resets all parental
control settings to factory mode.
Clean All - Reset all your settings to factory mode.
s'c eatures
Following is the description of these ratings.
TVRatings
Canadian English Ra tings
As you block rating. all rating higher than the ones you
select are blocked as well. E.g. if you choose to block
the MPAA rating R, the higher ratings, NC-17 and X,
are automatically blocked too.
12
Digital Media Player
Please note that Hisense Will not assume any responsibility
for any lost data and cannot guarantee perfect compatibility
with all mass storage devices. Be sure to insert the USB disk
with standard USB 2 0 port. Data Input Irom USB Memory
Stick only Do not Connect any device to this terminal such
as digital camera, keyboard. mouse, etc.
I? NOTE
Never remove the USB flash drive or turn off your TV
while vieWing video/photo.
* Press [INPUT] button to display the INPUT menu, press
[A/V] button to highlight the USB source, then press
[ENTER] button to confirm. (If you want to exit DMP, you
can press [lNPUT] button to switch to other sources)
‘ Press [RED] button to switch the media type.
’ Press [YELLOW/BLUE] button to turn to the previous!
next page
“ism"
:- Media content control function buttons
When viewing video/photo, you can press these buttons on
the remote control to control video/photo.
Fast ton/ward The preVious
one
Fast backward —‘ The next one
Playi
Pause Stop
Enjoy Movie Files
Press [RED] button to swrtch the media type to MOVIE.
Press [A/V/] to select the movie you want to view.
Press [ENTER] to play the movie.
Press [EXIT] to exit the video and return to the previous
directory
5, When enjoying the video, press [MENU] button to display/
exit the tool bar Press [VIENTER] to enter the submenu
and press [EXIT] to return to the upper menu.
#9.”?
‘ Tool bar
@0990
0 Progress bar.
0 Play/Pause the Video
9 Play the previous video,
0 Play the next Video.
6 Fast backward Press [ENTER] to select the backward
speed.
0 Fasttorward Press [ENTER] to select the forward speed
6 Options. Adjust Repeat Mode. Zoom Mode, Audio Track,
and Subtitle.
0 Play list You can select the video you want to View, then
press [ENTER] to play.
0 Select time to play. Press [] to select the position
you want to set, press [0~9] to set the time (or press [A/V]
to ad]ust it), then press [ENTER] to conlirm and the video
will to play at the time you have set.
@Videe Info, Displays details on image resolution, audio
and video code, subtitle, audio track, program and time
0 Stop playback,
6. Press [ASPECT] button one or more times to enlarge the
image by Wide and Normal.
vance eatures
Browse the Photos
Press [RED] button to switch the media type to PHOTO
Press [A/V/] to select the photo you want to view.
Press [ENTER] to browse the photo.
Press [EXl‘l] to return to the previous directory.
91:59.“?
When browsing photos. press [MENU] button to display/
exit the tool bar. Press [FIENTER] to enter the submenu
and press [EXIT] to return to the upper menu.
0 Tool bar
H H H H H
90 oo oo oo 90
When the photos in browsing or pausing, the menu Wl”
be different.
0 Play/Pause the photo
9 Stop browsing the photo
0 Browse the previous photo
9 Browse the next photo.
9 Allows the photo to rotate 90 degrees clockwise.
O Allows the photo to rotate 90 degrees anti-clockwise.
6 Zoom in the photo
0 Zoom out the photo.
0 Options. Vou can ad]ust Show Speed.
0 Photo lnfo Allows you to View the photo information
I The unit recognizes only a USB Memory Stick
I Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit (Not supported)
A USB Memory Stick is always inserted to this unit directly.
A USB Memory Stick is not supplied with this unit.
We do not guarantee that all USB Memory Sticks can be supported by this unit.
Be sure to keep a backup copy of the original files on your device before you play them back on this unit. We have no
responsibilities for damage or loss of your stored data.
To protect your USB Memory Stick files from being erased place the write protect sliding tab in the protect position
When you are ready to remove a USB Memory Stick. set the unit to go into Standby mode to avoid any damage to your
data and the unit.
A USB Memory Stick that requires its own driver or the device With a special system such as fingerprint recognition are
not supported.
This unit is not allowed to use the USB Memory Stick which requires an external power supply (500mA or more).
14
dvanced Features
Playable Format List
Video Decoder Support List Audio Decoder Support List
1 9201 080
1 920‘ 1 080
1 920‘1 080
MKV
1 920‘1 080
768‘576
1920'1080
1 920‘1 080
1 920 1 080
1 920 1 080
15
Trouble Shooting
When there is something wrong with your TV, you can try turning off the TV and then restart it. You can also Operate
according to the following chart. If the problem still cannot be solved, please contact the professional technicians.
POSSIBLE SOLUTIONS
0 Check if the power cord is in the AC outlet and if it has electricity.
0 Check if you have pressed [POWER] button on the TV or [POWER] button on the
remote control.
I Check to see if LED light is either red or blue. If illuminated, power to TV is OK.
C Check for the correct output connection on the external source and for the correct
input connection on the TV.
0 Make sure you have made the correct selection for the input mode for the incoming
signal.
Yes, this is normal. That is the TV searching for previous setting information and
initializing the TV.
0 Check the volume settings,
0 Check if Mute mode is set “on".
C If black and white picture first unplug TV from AC outlet and replug after 60 seconds,
0 Check Color Setting if picture is black and white.
0 An electrical appliance may be affecting TV set. Turn off any appliances, if
interference goes away, move appliance farther away from TV.
I Insert the power plug of the TV set into another power outlet,
I If using an external antenna, check the direction, position and connection of the
antenna.
0 Adjust the direction ol your antenna or reset or fine tune the channel.
Check if there is interfering source nearby, such as appliance or electric tool.
“Click" sound can be caused when the room temperature changes. This change
causes the television cabinet to inflate or contract. which makes the sound. This is
normal and TV is OK.
The Closed Caption function is set in the text mode. To remove it, access Closed
Caption from the menu screen and change the Mode setting from text to either C01 or
off.
16
Trouble Shoot ng
POSSIBLE SOLUTIONS
That would indicate that the MTS mode on your unit is set to SAP mode. We suggest
setting the MTS mode to either Stereo or Mono . For further instruction, please see
Audio Adjust or MTS/SAP in your user manual.
0 SAP is Second Audio Program. It's a second audio channel that is usually used for a
second language or descriptive audio tor the visually impaired.
C MTS stands for Multichannel Television Sound, a standard that allows the encoding
of 3 channels of audio within a standard NTSC (analog) video signal to a television.
A television that is able to receive MTS Stereo allows you to watch television with
stereo sound.
0 Check the cable connection tor an incoming signal. Make sure the signal is coming
OK. Best way to confirm signal is to use another TV and/or contact your cable
company.
0 Reprogram your channels. Press [MENU] button on your TV remote control, change
Input Source setting to “Cable", then use “Auto Channels Search" to reprogram your
channels.
After switching to Cable, please auto program the channels. The TV will “remember” all
the channels then the TV will allow you to surf the channels with [CH NV] buttons.
I Confirm that TV still has power and is operational.
0 Change the batteries in the remote control.
0 Check if the batteries are correctly installed.
0 Clean the front of the remote control (LED window).
0 If using a universal remote. be sure to select the TV mode on the remote.
o If the remote still does not work:
- Remove and reinstall the batteries correctly to reset the remote or install new
batteries.
- Press the Power button to turn on the TV. With a universal remote it you have reset
or changed the batteries you will need to reprogram the remote for the other units.
0 Check if there is obstmction between the remote control and the TV.
TIP: It you have a digital camera / camera phone, you can aim the front of the remote
at camera lenses (at this time. the camera should set on camera mode, not play
mode). Observe the camera screen while pressing a button on the remote control; you
should see flashing light on the screen. If there is no light observed. the remote control
is not working. You need to repair or replace the remote control.
l7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2014:02:27 14:11:44+08:00
Create Date                     : 2014:02:27 14:11:37+08:00
Metadata Date                   : 2014:02:27 14:11:44+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Title                           : ES-G132903Ó¢ÎÄ
Creator                         : ΢ÈíÓû§
Document ID                     : uuid:a00f5a16-a4f6-4f97-8b3b-62f14f61d882
Instance ID                     : uuid:4ef73d42-69d7-49b6-99f1-6de9fc142797
Producer                        : Corel PDF Engine Version 9.397
Page Count                      : 9
Author                          : ΢ÈíÓû§

EXIF Metadata provided by EXIF.tools