Hisense Electric LCDE0007 LCD Monitor User Manual

Hisense Electric Co., Ltd. LCD Monitor

W9HLCDE0007_User Manual

42K316DW46K316DW50K316DWEnglishwww.hisense-usa.comservice@hisense-usa.comES-G121352
IThe lightning flash with arrowhead symbol, within anequilateral triangle is intended to alert the user to thepresence of uninsulated dangerous voltage within theto constitute a risk of electric shock.The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.FCC Statement Energy StarNOTE:This equipment has been tested and found to comply withthe limits for a class B digital Device, pursuant to part 15of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio Communications. However, there isno guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC ID Number WiFi Module: WWMMN421V1WARNINGThe manufacturer is not responsible for any radio or TVinterference caused by unauthorized modifications tothis equipment. Such modifications could void the user'sauthority.NOTEWhere the MAINS plug or an appliance coupler is usedas the disconnect device, the disconnect device shallremain readily operable.Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other countries. All other trademarks are property of their respective owners. 2011 Hisense USA, Corporation. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.owners.TM) technology.trademarks or registered trademarks of HDMI Licensing LLC.Your Hisense TV is ENERGY STARqualified in the “energy saving” mode. It meets strict energy efficiency guidelines set by the U.S. Environmental ProtectionAgency and Department of Energy.ENERGY STAR is a joint program of these government agencies, designed topromote energy efficient products and practices. Changesto certain features, settings, and functionalities of this TV(i.e. TV Guide, Picture, Sound) can increase or change thepower consumption. Depending upon such changed settings,the power consumption may exceed the limits required forthe ENERGY STAR qualification in the “energy saving” mode.Caution:The Equipment complies with FCC radiation exposure limitsset forth for an uncontrolled environment.
II
IIIImportant Safety Instructions1. Read these instructions.2. Keep these instructions. 3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus.16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.17. Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.18. Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.19. If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.20. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.21. Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.22. When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.23. Sudden high volume sound may cause hearing or speaker damage. When you use headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high volume sound, it may cause hearing damage.CONDENSATION: Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit.
IVImportant Safety InstructionsHOW TO HANDLE THE LCD PANEL:  Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur. If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the following formats or images: Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites. Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms. LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots.This is not a sign of a malfunction. Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference. Effect on infrared devices - There may be interference while using infrared devices such as infrared cordless headphones.Declaration of ConformityThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and (2)This device must accept any interference received, including interference that may cause undesired operation.Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to find a recycler in your area.The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed black (in the case of a dead pixel), blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.TO USE AC POWER1. The power cord is attached to the TV at the factory.2. Connect the AC cord into an AC outlet.End of life directivesNon-active pixelsPower sourceWARNINGDo not connect this unit to the power using any device other than the supplied AC cord. This could cause fire, electrical shock, or damage.Do not use with a voltage other than the power voltage specified. This could cause fire, electrical shock, or damage.CAUTIONWhen this unit is not used for a long time, (e.g., away on a trip) in the interest of safety, be sure to unplug it from the AC outlet.Do not plug/unplug the AC cord when your hands are wet. This may cause electrical shock.
VImportant Safety InstructionsDisclaimer:  Hisense USA companies ("Hisense").  A wired or wireless Internet connection is required for certain features and is not included with the television; please contact a local Internet Service Provider for assistance.  Content suppliers may require a subscription to activate or use their services which is not included with the television and is sold separately.  The Hisense TV web browser supports a variety of multimedia platforms however it does not support all players nor does it support every player version, therefore, access to certain web content may be limited or unavailable.INTERNET CONNECTION, ACCEPTANCE OF END USER LICENSE AGREEMENT (EULA) AND REGISTRATION OF YOUR HISENSE TELEVISION SERIAL NUMBER IS REQUIRED. YOU MUST BE AT LEAST 13 YEARS OF AGE TO REGISTER ONLINE. HISENSE MAY ADD, DELETE, MODIFY, OR TERMINATE ONLINE SERVICES WITHOUT NOTICE.Consent to Use of Data:  To facilitate the provision of software updates, any dynamically served content, product support and other services you agree that Hisense and its affiliates may collect, use, store and transmit technical and related information that identifies your television (including an Internet Protocol Address), its operating system, application software and any connected devices.  Hisense and its affiliates may also use this information in the aggregate, in a form which does not personally identify you, to improve our products and services and we may share anonymous aggregate data with our third party service providers. Internet Performance Issues:  A broadband Internet connection is required for access to Internet Apps and Content.  To avoid poor performance while accessing Internet Apps and Content, be sure other devices on the same Internet connection are not running file sharing applications, streaming audio or video content and are not logged in to chat-rooms.  These applications may consume your connection’s bandwidth, causing lag or other undesirable effects.  This television uses TCP and UDP port(s) to access Internet Apps and Content.  Please consult your router or personal firewall documentation for information on how to allow access to these ports. If you are installing this television on a corporate Internet connection, contact your network administrator for information and assistance.Liability:  The Hi-Smart portal may be linked to other sites on the World Wide Web or Internet which are not under the control of or maintained by Hisense. Such links do not constitute an endorsement by Hisense. You acknowledge that Hisense is providing these links to you only as a convenience; you further agree that Hisense is not responsible for the content of such sites.INFORMATION ACCESSED OR OBTAINED VIA Hi-Smart IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OF NON INFRINGEMENT. SOME JURISDICTIONS DO NOT ALLOW FOR THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSIONS MAY NOT APPLY TO YOU.Access to certain areas of the Hi-Smart portal is restricted and requires a password for entry.  If you are an authorized password holder, you agree that you are entirely responsible for the confidentiality of your password and account information, and agree to notify Hisense immediately if your password is lost, stolen, disclosed to an unauthorized third party, or other wise may have been compromised. You agree that you are entirely responsible for any and all activities which occur under your account, including any fees which may be incurred under your password protected account whether or not you are the individual who undertakes such activities. You agree to immediately notify Hisense of any unauthorized use of your account or any other breach of security in relation thereof known to you.You acknowledge that Hi-Smart may include certain inaccuracies or typographical errors which may affect the quality of materials and third-party content. You acknowledge that the materials or any third-party content have not been independently verified or authenticated in whole or in part by Hisense, and agree that Hisense does not warrant the accuracy or timeliness of materials or the third-party content, and further agree that Hisense has no liability for any omissions in the materials and content, whether provided by Hisense or any third-party. To the maximum extent permitted by applicable law, Hisense shall not be liable to you or a third-party claiming through you for any damage suffered as a result of your displaying, copying or downloading information or material accessed or obtained via Hi-Smart. In no event shall Hisense be liable to you or any third-party for any indirect, extraordinary, exemplary, punitive, special incidental or consequential damages (including loss of data, revenue, profits or other economic advantage) however arising, whether for breach or in tort even if HISENSE has previously advised of the possibility of such possible damage.Technical Support:  If you have questions regarding installation, configuration or operation of this product, please telephone a Hisense Customer Care representative who will be happy to assist you with any difficulties you may be experiencing.Dial: 1-888-935-8880 (Toll Free) Email: service@hisense-usa.com
1ContentsGetting StartedAccessories List...............................................................................................3Installing the Stand ..........................................................................................3Installing a Wall-Mount Bracket .......................................................................4When Installing the TV Against a Wall or Enclosed Area ................................ 5Viewing the Control Panel ............................................................................... 6Viewing the Remote Control ............................................................................7Installing Batteries in the Remote Control ....................................................... 8Making Connections ........................................................................................9Basic FeaturesTurning the TV on or off ..................................................................................13Turning the TV On for the First Time ..............................................................13Selecting the Input Source .............................................................................13Changing Channels / Volume ......................................................................... 14Shortcuts Instructions .....................................................................................14To Use the Menu ............................................................................................15Using the Picture Menu .................................................................................. 15Using the Audio Menu ....................................................................................16Using the Screen Menu ..................................................................................17Using the Channels Menu .............................................................................. 17Using the Settings Menu ................................................................................18Using the Lock Menu ......................................................................................19Advanced FeaturesNetwork Connection ....................................................................................... 20DLNA Settings ................................................................................................23Media Share Settings in Computer.................................................................24Settings to Share Files ...................................................................................24
2ContentsAdvanced FeaturesNetwork Function............................................................................................25Enter the Network Applications....................................................................... 26VUDU HD Movies ...........................................................................................26VUDU Apps ....................................................................................................28..............................................................................................................28Opera..............................................................................................................29YouTube .........................................................................................................31Other Apps......................................................................................................32Other Information............................................................................................33Digital Media Player ........................................................................................34Enjoy Video Files ............................................................................................34Enjoy Music Files............................................................................................35Browse the Pictures........................................................................................35Browse the Text Files .....................................................................................36Other InformationTrouble Shooting ............................................................................................37General ...........................................................................................................39Illustrations are for your reference only!
3Getting StartedAccessories ListInstalling the StandUSER MANUAL Quick Setup Guide Warranty CardUser Manual Quick Setup Guide Warranty Card Remote Control Battery × 2 Spacer × 4NOTES1. The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard orsharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressureon the front of the TV at any time because the screen could crack.2. For tabletop use, the TV must be attached to the provided stand as shown on this page.3. To Wall-Mount, brackets (not provided) must be attached to the TV as shown on next page.Follow the illustrations below to complete the installation steps:1. Place your TV on a soft cushioned surface carefully to prevent the screen from scrathing as shown in Figure 1.2. Align the ridge on the column with the groove in the base plate, then insert the stand column into the base plate, makesure the FRONT of stand column match the FRONT of base plate. Secure the stand column to the base plate with the fourprovided Screws A. See Figure 2.WARNINGBe sure to disconnect the AC power cord before installing a stand or Wall-Mount brackets.CAUTIONUse a covered table or bench to lay the TV on and handle the TV carefully to prevent damage to the TV screen or cabinetduring assembly.Screw A  (M4 × L12)1Screws: ScrewA (M4×L12)×6 ScrewB (ST4×L14)×2 ScrewC (M5×L12)×4 ScrewD (M6×L25)×4soft cloth2EN-33921AMMTTSS//SSAAPPDDIISSPPLLAAYYSSOOUUNNDDMMUUTTEECCCCDDEEXXIITTCCOOMMPPOONNEENNTTHHDDMMIIRREETTUURRNNGGUUIIDDEEMMEENNUUHHii--DDMMPPVVGGAA-IINNPPUUTTPPIICCTTUURREE33DDLLAASSTTFFAAVV®Hii--SmmaarrttAASSPPEECCTTSSLLEEEEPPEENNTTEERR
4Getting Started34Installing a Wall-Mount BracketIf you want to attach the TV to a Wall-Mount bracket (not provided), you should first remove the stand if it is pre-attached (see Step 1).1. Make sure the TV is laid face-down on a clean, safe, and cushioned space, remove the original screws in the bracket holes on the TV back over.3. Follow instructions provided with the Wall-Mount bracket.If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for assistance.  The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect assembly.The selected screws are 6.5 ~ 7.5 mm in length when measured from the attaching surface of the TV's rear cover. The diameter and length of the screws differ depending on the Wall-Mount Bracket model.2.   tekcarb gnidnopserroc eht ni srecaps dedivorp eht ecalPholes. Attach purchased bracket (1.5 ~ 2.5 mm thickness) on the TV with 4 screws (M6 × L25)  which  in  accessories bag.  Follow instructions provided with the wall bracket.1WARNINGUse only the 4 screws (M6 × L25) provided with the  TV to prevent internal damage to the TV set or cause it to fall.23. Align the stand cover with the stand column, then secure the stand column to the stand cover vertically with the two provided  Screws A and horizontally with the two provided Screws B. See Figure 3. 4. Align the stand cover with the screw holes on the bottom of TV back, secure the stand to the TV with the four provided Screws C. See Figure 4.Screw A  (M4 × L12)Screw C (M5×L12)Screw B (ST4×L14)Screw D (M6 × L25)Spacer × 4 Bracket(1.5~2.5mm)
5Getting StartedWhen Installing the TV Against a Wall or Enclosed AreaInstall with standNever install the TV set as follows:Install on the wallWall-Mount Bracket6.5 ~ 7.5 mmScrewSpacerthe TV's rear coverWall-Mount hole pattern VESA (mm) 400 × 400Wall-Mount screw size (mm) M6Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 41°F (5°C).Leave at least this much space around the set.Leave at least this much space around the set.4 inches(10cm)4 inches(10cm) 4 inches(10cm)4 inches(10cm)4 inches(10cm)23»8 inches(6cm)12 inches(30cm) 12 inches(30cm)Wall WallAir circulation is blocked.Inadequate air circulation can lead to overheating of the TV and PD\FDXVHGDPDJHWR\RXU79RUFDXVHD¿UH
6Viewing the Control PanelGetting StartedPower indicatorItem DescriptionPower indicator Light up when the power is on.Remote sensor Receives remote signals from the remote control.Do not put anything near the sensor, as its function may be affected.MENU Display an on-screen menu to setup your TV’s features.INPUT Select among the different input signal sources.VOLV / V Adjust the volume.CH/VVSelect the channel.Power button3D emitterTurn on the TV or put the TV in standby mode.Caution: The TV continues to receive power even in standby mode.Unplug the power cord to disconnect power.Sends signals to 3D glasses during playback of 3D movies and TV shows.NOTESFOR ILLUSTRATION ONLY.Powering up or down the TV requires several seconds of processing time. Do not rapidly turn the TV on/off as abnormaloperation may occur.Remote sensor3D emitterMENUVOLCHINPUTMenuINPUTVolumeVChannelVVolume VChannel V
7Viewing the Remote ControlGetting StartedNOTESFOR ILLUSTRATION ONLY.[RED/GREEN/YELLOW/BLUE] buttons are used for Electronic Program Guide (EPG), Hi-Smart Hub and Digital Media Player(DMP). After pressing the [GUIDE], [Hi-Smart] or [Hi-DMP] button, the same color buttons will appear with explanations in theon-screen display (OSD). Follow the steps shown in the OSD.Power on/offIncrease VolumeSelect sound modeDecrease VolumeReturn to the previous menuSelect picture modeMute buttonMenu buttonDash button(use when entering a digital sub-channel▲/▲/▲/▲Navigate Up/Down/Left/Right or adjust on-screen menu settingsDisplays the information bannerOpen the DTV program guideConfirm selections(if available)3D buttonDisplay the favorite channel listZoom ButtonSet the sleep timerEnter the VUDU HD MovieClose the menuNext channel Previous channel Select input sourceAdjust Closed Caption (CCD) modeAudio select buttonDirect channel selectionSpecial function buttonsMedia content control function buttonsGo to the previous channel Enter the NETFLIX instant streamingOpen the Hi-Smart HubEN-33921AMMTTSS//SSAAPPDDIISSPPLLAAYYSSOOUUNNDDMMUUTTEECCCCDDEEXXIITTCCOOMMPPOONNEENNTTHHDDMMIIRREETTUURRNNGGUUIIDDEEMMEENNUUHHii--DDMMPPVVGGAA-IINNPPUUTTPPIICCTTUURREE33DDLLAASSTTFFAAVV®Hii--SmmaarrttAASSPPEECCTTSSLLEEEEPPEENNTTEERRHi-DMP (digital multimedia player) buttonSelect COMPONENT input sourceSelect HDMI input sourceSelect VGA input source
8Installing Batteries in the Remote ControlGetting Started1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.3. Close the battery compartment cover.1Gently push and slide 2Insert the batteries 3Gently push and slideNOTES1. Dispose of your batteries  in a designated disposal area.  Do not throw the batteries into a fire.2. Do not mix battery types or combine used  batteries with new ones.3. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.4. If you do not intend to use the remote control for a long time, remove the batteries.5. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.6. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.7. Do not mix old and new batteries.8. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television!If you would like to program your other household remote controls to your new Hisense television, please consult the User’s Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’User’s Manuals should include instructionson how to program their remote to your television.Below is a list of Hisense codes for the most common Cable and Satellite providers. Use the Hisense code that is associatedwith your Cable or Satellite provider(if applicable). DIRECTV ..............................................0178 or 10019 Time Warner Cable .............................. 386 or 0178 Comcast................................................ 0178 or 10178 Cox Communications ........................... 0178 Dish Network ........................................ 627 or 505If the Hisense code associated with your Cable or Satellite provider is not listed above, if the code above does not work, or ifyou cannot locate the instructions for programming your household remote to your television, call your local Cable or Satelliteprovider’s customer service center.If your Cable or Satellite provider does not have an Hisense code available, please visit http://www.hisense-usa.com for additional codes.
9HDMI2 HDMI1DIGITALAUDIO OUTANT/CABLEINHEADPHONEYPBBPRRVIDEOAV INCOMPLRC/DVIDIO INHDMI4 HDMI3Making ConnectionsGetting StartedLAN USB USB VGAHDMI HDMIAVHEADPHONEANT/CABLECOMPONENTPower inpuHDMIHDMIDIGITAL AUDIO OUTPC/DVIAUDIO INItemDescriptionANT/CABLEConnect an antenna or cable TV to this jack.HDMIHDMI (High-Definition Multimedia Interface)provides an uncompressed, all digital audio/video interface between this TV and any HDMI-device, such as a set-top box, Blu-ray disc player or A/V receiver.COMPONENTConnect to a DVD player, Digital Set-Top-Box  or other A/V devices with component (YPBPR) video and audio output jacks.VIDEO/AUDIO(L,R)Connect to the composite video and audio (L/R) output jacks on external video devices.VGA PC/DVI AUDIO INConnect to a PC or other devices with a VGA interface.HEADPHONEConnect headphone for private listening.DIGITAL AUDIO OUTConnect to an external digital audio device.USBPort for Digital Media Player and for charging 3D glasses.LANConnect an ethernet cable to access a network or the Internet.NOTESome external devices impossible insert to this set for individual difference. Please replace with appropriate external signal cable or increase the adapter to match with the port in such case.
10Getting StartedNOTESCheck the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.Not all A/V devices have the ability to connect to a TV, please refer to the user’s manual of your A/V device for compatibility and connections procedure. Always unplug the power cord when connecting external equipment.Connecting an antenna, cable or cable/satellite boxConnecting an A/V Device with Composite CableorANT OUTCableVHF/UHF AntennaEXTERNAL DEVICESTV JACK1.Turn off the TV before connecting the antenna.2.Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna, cable or cable/satellite box. If you are using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided). 3.Connect the other end of the cable to the ANT/CABLE IN jack on the side of your TV. 1.Use the audio and video cables to connect the external A/V device’s composite video/audio jacks to the TV’s jacks. (Video = yellow, Audio Left = white, and Audio Right = red)2.Plug the connected devices into the mains socket before switching on the TV.3.Select the corresponding source from the TV. ANT/CABLEINEquipment with A/V jacksD Player/RecorderVideo CameraEXTERNAL DEVICESSet-top boxSatellite ReceiverSatelliteantennacableVCRA/V OUTVideoLRWhite(L)White(L)()Yellow(Video)Yellow(Video)Red(R)Red(R)TV JACKVIDEOAV INLRAV Cable (not included)
11Getting StartedConnecting an A/V Device with Component (YPBPR) CableConnecting an A/V Device with HDMI CableConnecting a headphone1.Use a component cable to connect the external A/V device’s component output jacks to the TV’s YPBPR jacks. Use an audiocable to connect the external A/V device’s component audio jacks to theTV’s AUDIO (L/R) jacks.2.Plug the connected devices into the mains socket before switching on the TV.3.Select the corresponding source from the TV.Support digital connections between HDMI - enabled AV devices such as PVR, DVD, Blu-Ray, AV receiver and digital devices.Some devices such as PVR or DVD player require HDMI signal to be set to output in the device's settings.Please consult your device user manual for instructions. 1.Use an HDMI cable to connect the A/V device’s HDMI output jack to the TV’s HDMI jack. 2.Plug the connected devices into the mains socket before switching on the TV .3.Select the corresponding source from the TV. Headphones or an analog sound bar can be connected to the HEADPHONE output on your set. (While the headphone is connected, the sound from the built-in speakers will be disabled.)YPBBPRRCOMPLREquipment with A/V jacksDVD Player/RecorderVideoCameraEXTERNAL DEVICESSet-top boxSatellite ReceiverSatelliteantennacableVCRWhite(LWhite(L)()Red(R)Red(R)()Audio Cable(not included)Component Cable (not included)TV JACKpComponentRLPRPBYPR/CRPRPB/CBPBYYHDMIHDMITV JACKEXTERNAL DEVICESDVDSet-top BoxHEADPHONEEXTERNAL DEVICESTV JACKNOTEThe HDMI connector provides both video and audio signals, it’s not necessary to connect an audio cable.
12Getting StartedConnecting a PC with VGA CableConnecting an Audio Receiver with Digital Audio out cable1.Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio output jack to TV’s PC/DVI AUDIO IN jack. 2.Plug the connected devices into the mains socket before switching on the TV. 3.Select the corresponding source from the TV. 1.Use a coaxial cable to connect the A/V device’s digital audio in  jack to the TV’s DIGITAL AUDIO OUT jack.2.Plug the connected devices into the mains socket before switching on the TV.3.Select the corresponding source from the TV. NOTESPrimarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility is not guaranteed.The VGA cable will not supplied with the product. We strongly recommend to use VGA cable with 2 ferrite cores as shown in the figure.NOTESWhen a digital audio system is connected to the DIGITAL AUDIO OUT (COAXIAL) jack, decrease the volume of both the TV and the system. 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.When the receiver (home theater) is set to on, you can hear sound output from the TV’s digital audio out jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD/Blu-ray player/cable box/STB satellite receiver directly to an amplifier or home theater.TV JACKSEXTERNAL DEVICESPowerlessBass SpeakerSpeaker$XGLR$PSOL¿HUDIGITALAUDIO OUTConnecting an ethernet cable to access a network or the InternetConnect an ethernet cable to access a network or the Internet. TV also features wireless connectivity. For more information, see “Network Connection”.EXTERNAL DEVICESComputerTV JACKPCPC/DVIAUDIO IN
13Basic Features1.Make sure that you have: Installed the remote control batteries.Connected an antenna or cable.Connected the power cord.Matched the remote control withTV.2.Press[POWER]buttontoturnonyourTV.TheSetupWizard menu displays.3.Press[▲/▲/▲/▲] toselectyourmenulanguage:English,Spanish or French, press [ENTER] button to confirm.4.Press[▲/▲]toselectyourPictureMode:HomeModeorRetail Mode, press [ENTER] button to confirm.IfyouselectRetailMode,amessageappears“Areyousureyouwantretailmode?”Select“YeYYs”tocontinue,orselect “No” to change your selection.IMPORTANTTT:Atfirst,youhavetomatchtheremotecontrol with TV.VVTo turn yourTTTV on or off (standby mode):ff1.Plug the power cord into anAC power outlet.2.Press[POWER]button,YourYYTV turns on.3.Press[POWER]buttonagaintoturnoffffyourTV.Whenyou turn off yourffTV, it goes into standby mode.TheSetupWizardmenuappearsthefirsttimeyouturnontheTV.Itwillassistyoutospecifyffthemenulanguage,Picture Mode,Tuner Mode and Channel Installation.IMPORTANTTT:MakesurethattheantennaorcableisconnectedandawiredorwirelessInternetconnectionisavailable.Turning the TV On for the First TimeTurningthe TV on or offIfyouselectedRetailMode,EnergySavingisnotrealized.5.Press[▲/▲]toselectyourTunerMode:AntennaorCable, press [ENTER] button to confirm.6.Press[▲/▲]tosettheChannelInstallation:ScanorSkipScan, press [ENTER] button to confirm. Ifyouselect“Scan”,yourTVautomaticallystartsChannelInstallation available in your viewing area.Ifyouselect“SkipScan”,yourTVdoesnotscanforchannels.Dependingonthereceptioncondition,itmaytakeupto25minutesormoretocompletememorizingchannels.Please allow the process to complete without interruption.WARNINGWWWhenyourTVisinstandbymode,itisstillreceivingpower.ToTTcompletelydisconnectpower,unplugthepowercord.NOTEIfyourTVdoesnotreceiveaninputsignalforseveralminutes, it automatically goes into standby mode.EXITChoose your menu LanguageEnglishEspañolFrançaisSelect Next ExitBack Select Next ExitEXITChoose your Picture ModeHome modeRetail modeHome mode default settings are recommended for in-home use.ENERGY STAR® qualied.Retail mode is intended for in-store display and resets videosettings at Power On.EXITPlease connect cable or antennaChannel InstallationStatus: Scanning...ATV Program Installed: 3DTV Program Installed: 2Cancel8%ThefirsttimeyouturnonyourTV,youmustselecttheTVsignalsource.YouYYrTVstoresthisinformation,soyoudonotneedtochangetheTVsignalsourceunlessitchanges.Forexample,youchangefromanoutsideantennatocableTV.To select the video input source:TT1.TurnonyourTV,thenpress[INPUT]buttonontheremoteorontheTV.TheInput Source menu opens.2.Press[▲/▲]buttontohighlighttheinputsource,thenpress[ENTER]button.3.Press[POWER]buttonagaintoturnoffffyourTV.Whenyou turn off yourffTV, it goes into standby mode.Selecting theInputSourceINPUTTVAVComponentVGAHDMI 1HDMI 2HDMI 3HDMI 4Hi-DMPEXITOKSelectEnterExit
14Basic FeaturesAspect - Select the screen aspect ratio from Normal, Wide,Zoom and Cinema.Normal: The original 4:3 aspectratio (1.33:1 signal) is preserved,so black bars are added to the leftand right of the image. Standard TVbroadcasts are displayed with a 4:3aspect ratio.Wide: When watching a standardbroadcast or full-frame movie inthis mode, the display image isstretched proportionately to fillthe TV screen. When watching awidescreen (1.78:1 signal) programor movie, the display image fills theTV screen.Zoom: Stretch the 4:3 aspect ratioimage vertically and horizontally tofill the screen at 1:1.78 aspect ratio.Cinema: Stretch the 4:3 aspect ratioimage vertically and horizontally tofill the screen at 1:2.35 aspect ratio. Shortcuts InstructionsDISPLAY - Display the information banner. The informationincluding channel number, channel name, current systemtime, tuner mode, audio stream, video format, audiolanguage, closed caption mode, parental locks rated,program details, etc.GUIDE - Open the DTV program guide. The program guideinformation is provided by the broadcasting company.FAV - Display your Favorite List. You can add or deletechannels to create your favorite list. Cursor up/down: Press [▲/▲] button to select theoption.Add/Erase: Press [YELLOW] button to add or delete thechannel from Favorite List.Page up/down: Press [RED/GREEN] button to page upor down. VUDU - VUDUTM is an on-demand, pay-per-view, servicethat offers high-definition movies via the Web. You canaccess the VUDU service by pressing this button. Hi-Smart - Press to open the Hi-Smart Hub. The Hi-SmartHub provides convenient access to Services and Appswhich let you watch movies, TV shows, listen to music, andmuch more.NETFLIX - Press to open the Netflix interface. Netflix is anonline DVD and Blu-ray Disc rental service, offering instantaccess to movies and TV shows to Netflix members. Netflixunlimited membership required (subscription not included).1. Press the [CHV/V] (or [CH +/-]) on the TV/remote controlto change the channel.2. Press the [VOLV/V] (or [VOL +/-]) on the TV/remotecontrol to adjust the volume.3. Press the numeric buttons on the remote control todisplay the corresponding channels.Changing Channels / VolumeNOTEChanging the channels can also be achieved by directlyentering the channel number using the numeric keys onthe remote control. If you are entering a two or three digitchannel number, the time between key presses should be less than 3 seconds.
15Basic FeaturesTo Use the Menu1Press the [Menu] button to open the main menu.2Press [▲/▲] to select a menu option, then press[▲/ENTER] to enter the menu.3In each menu, you can:Press [▲/▲] to select an item,Press [▲/▲] to adjust the value, orPress [▲/ENTER] to enter the submenu,Press [RETURN] to exit the submenu.4Press [EXIT] button to exit the menu.NOTEFOR ILLUSTRATION ONLY.Using the Picture MenuYou can adjust:Picture Mode - Adjust the Picture Mode. You can select Standard, Theater, Energy Saving, Game, Custom or Vivid.Brightness - Increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture.Contrast - Increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture.Color - Adjust the level of color in the picture.Tint - Adjust flesh tones so they appear natural.Sharpness - You can increase the sharpness level for clearer images or decrease the sharpness level for smoother images.Advanced Video - Access advanced video settings such as Color Temperature,Noise Reduction and Adaptive Contrast .Color Temperature: Change the color temperature. You can select a preset color temperature: Cool, Standard and Warm.Noise Reduction: Optimize the picture quality by filtering signal interference. You can select Off, Low, Medium or High.Adaptive Contrast: Automatically adjusts the contrast level of the selected input source.Picture   Select BackAutomatically adjust picture detail andColor TemperatureNoise ReductionAdaptive ContrastWarmMediumOnNOTEWhen 3D video is watched under the fluorescent lamp (50~60 Hz) or tri-band fluorescent tube, there may be slight flicker, so please adjust the illumination downward or switch off the light.Certain functions, such as change aspect ratio,arenott ratio,areavailable when watching 3D movies and TV shows.Other brands 3D glasses may not be supported.Sit upright facing the TV when watching 3D movies and TV shows.This TV supports automatic identification of common 3D formats when connected to HDMI V1.4 compatible sources. Other 3D sources require manual setup. Enter Select ExitPictureAdjust image to suit personal preferences.Picture ModeBrightnessContrastColorTintSharpnessAdvanced Video3D505050010StandardStandardOKbrightness.
16Basic Features3D - Enables playback of 3D movies and TV shows (requires compatible 3D glasses). 3D Mode:Format may be set to: Off, 2D-to-3D, Side-by-Side or Top-and-Bottom.L-R Switch: Flips the left and right frames in Side-by-Side format.Depth of Field: Adjusts the range of distance (focus) that appears acceptably sharp in a 3D image.3D-to-2D: Disables automatic identification of 3D format during playback; forces 2D playback using only the Left or Right frame.Picture   Select Back3D Mode.3D ModeL-R SwitchDepth of Field3D-to-2DSide-by-SideLRO16NOTEWhen 3D signal format is Frame Packing, the image will be displayed according to the resolution of the incoming signal.For example: when the input signal is 1280×720, a 720p image will be displayed. A 1920×1080 input signal will be displayed in 1080p.When 3D signal format is Side-by-Side, Top-and-Bottom, the image is displayed full screen in half resolution (960× 1080 or 1920×540 respectively).Using the Audio MenuYou can adjust:Sound Mode - Select the Sound Mode: Standard, Speech,User or Music.Balance - Adjust the volume of the left and right speakers.Equalizer - Soften or enhance the sound at specificfrequency points.Sound Surround -Simulates surround sound and enhances-bass response.Digital Audio Output - Send digital audio to an externalaudio system. You can select PCM, RAW or Off.PCM: PCM outputs two channel audio regardless of theinput format.RAW: Passes through (output = input) the incoming audiosignal without decoding. E.g. incoming Dolby Digital, DTSor PCM data stream is simply output as it is without anyprocessing.Auto Volume Control - Automatically adjusts volume to aconsistent level; attenuates loud passages.Audio   Select BackStandardOPCMO0Select a Sound mode to achieve ideal sound.Sound ModeBalanceEqualizerSound SurroundDigital Audio OutputAuto Volume ControlAudio Adjust Select Back10DB0DB-10DB0120Hz0500Hz01.5KHz05KHz010KHz
17Basic FeaturesUsing the Screen MenuUsing the Channels MenuYou can adjust:H.Position - Move the image right or left.V.Position - Move the image up or down.Phase - Adjust the focus of stable images.Clock - Adjust the sample frequency.Auto Adjust - Detects input signal clock, phase and position and adjusts TV display accordingly.You can adjust:Tuner Mode - Select TV source: Antenna or Cable.Auto Channels Search - Scans for channels that havesignals and stores the channels information in the channellist.Channel Skip - You can cancel a channel stored in thechannel list.Favorite List - Add or delete channels to create a favoritelist. You can press [FAV] button to display your Favorite List.MTS - Select the default audio stream: Mono, Stereo or SAP.Audio Language - Select the audio language: English,Español or Français.NOTEOnly available in VGA mode.ScreenEnter Select Exit393023127 Image positioning and PC settings.H.PositionV.PositionPhaseClockAuto AdjustOKChannels   Select BackSelect tuner connect mode.Tuner ModeAuto Channel SearchChannel SkipFavorite ListMTSAudio LanguageAntennaStereoEnglish   CancelAuto ScanStatus: Scanning... AntennaAnalog Channels: 0Digital Channels: 08%NOTEWhen you press [CHV / V] button, your TV skipsthe channel you cancelled. You can still tune to thechannel using the number buttons on the remotecontrol.NOTEOnly available in TV mode.
18Sleep Timer:Specify the amount of time before your TV automatically turns off: Off -10-...-120 minutes.Caption - Adjust Closed Captioning settings.Caption Control:Select the Closed Caption mode: CC Off, CC On or CC On When Mute.Analog Closed Caption: Select an Analog Captionsetting:CC1~CC4: Closed captioning appears in a small banner across the bottom of the screen. CC1 is usually the “printed” version of the audio. CC2~CC4 display content are provided by the broadcaster.Text1~Text4: Closed captioning that covers half or all of the screen. Text1~Text4 display content areprovided by the broadcaster.Off:To turn off the Analog Caption.Digital Closed Caption:Select a Digital Caption setting: Service1~Service6 or Off.Digital Caption Style:Customize the look of digital Closed Captioning.Caption Style: Set the look of Digital CC. “AsBroadcaster” uses broadcaster’s style.Font Size/Style/Color/Opacity: Select the size/style/color/opacity level of font.Background Color/Opacity: Select the color/opacitylevel of the background.Window Color:Select the color of the window.Network - You can setup the network configuration in this menu. For more information, see “Network Connection” and “Network Setup”.Demo Mode - Displays a banner at the bottom of the screen which describes the key features of the TV.Version Info - Display the software version information. You may need to reference this information when contacting Customer Care or upgrading the firmware online.Reset Default - Restores the TV configuration to factory settings. You will need to complete the setup for such things as Tuner/Channel settings, Network connection, Date/Time and other user preferences.Basic FeaturesSettings   Select BackClock, date and timers settings.Caption StyleFont SizeFont StyleFont ColorFont OpacityBackground ColorBackground OpacityWindow ColorCustomLargeStyle 1WhiteSolidBlackSolidBlackUsing the Settings MenuYou can adjust:Language - You can select the menu’s language to English, Español or Français.Menu Settings - You can set On-screen menu system.Timeout:Select the display time of the menu: 10-20-...-60 seconds.Time Setup -Set the time zone, daylight saving, time and sleep timer.Time Zone:Select your local time zone: Eastern Time, Indiana, Central Time, Mountain Time, Arizona, Pacific Time, Alaska or Hawaii.Daylight Saving:Set the Daylight Saving time for your area.Time: You can set time manually or select automatic if the TV is connected to an antenna or cable source.Auto Synchronization:Select “On”  for automatic date and time setting using information from broadcast stations in your area.Date/Time:Set the current year/month/day/time.Power On Timer: When “On”, you can set the timewhen the TV turns on automatically.Time:Set the desired time for the TV to turn on automatically.Power Off Timer: When “On”, you can set the time when the TV turns off automatically.Time: Set the desired time for the TV to turn off automatically.Settings   Select BackAdjust OSD language.LanguageMenu SettingsTime SetupCaptionNetworkDemo ModeVersion InfoReset DefaultEnglishSettings   Select BackObtain date and time from broadcaster.Auto SynchronizationDateTimePower On TimerTimePower Off TimeTimeOn2012/01/0101:01 PMOff12:00 AMOff12:00 AM
19Basic FeaturesUsing the Lock MenuWhen you first use this function, the default password is [0000]. Once you input this password, you can set options.You can adjust:Channel Block - Block selected Channels on the TV.Program Block - Block selected Programs on the TV.Rating Enable:Block or unblock TV ratings.U.S. TV Ratings: Restrict TV programs by USA Ratings.U.S. Movie Ratings: Restrict movie by USA Ratings.Canadian English/French Ratings:Restrict movie and TV programs by Canadian Ratings.Open V-Chip: Display an advanced V-Chip ratings table for digital channels (USA only).Block Unrated:Block unrated TV programs.Input Block - Block selected Input source on the TV.Change Password - If you want to change the default password, first enter the new password then enter the same password again.Clean All - You can reset all locks to factory mode.Following is the description of these ratings.U.S. Movie RatingsRating Defined asGGeneral audiencePGParental Guidance suggestedPG-13Parents strongly cautionedRRestrictedNC-17 No one 17 and under admittedXAdult audience onlyLockEnter Select BackPrevent access to TV services.Channel BlockProgram BlockInput BlockChange PasswordClean AllOKU.S. TV RatingsAgeDefined asTV-YAll childrenTV-Y7Directed to older childrenTV-GGeneral audienceTV-PGParental Guidance suggestedTV-14Parents Strongly cautionedTV-MA Mature Audience onlyContentsDefined asAAll of the ratings below that rating set blockedautomaticallyDSuggestive dialogueLStrong languageSSexual situationsVViolenceFVFantasy ViolenceCanadian English RatingsRatingDescriptionCChildrenC8+Children 8 years and olderGGeneral Programming, suitable for all audiencesPGParents Guidance14+Viewers 14 years and older18+Adult ProgrammingCanadian French RatingsRatingDescriptionGGeneral8 ans+8+General; Not recommended for youngchildren13 ans+Programming may not be suitable for childrenunder the age of 1316 ans+Programming is not be suitable for children under the age of 1618 ans+Programming restricted to adults
20Advanced FeaturesNetwork ConnectionYou can set up your TV so that it can access the Internet through your local area network (LAN) with a Ethernet or wireless connection. Connecting to a Wired Network    You can attach your TV to your LAN by one of the three following ways:You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 LAN cable. See the diagram below.  You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below. Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet with a Cat 5 cable. See the diagram below. Note that the  wall outlet is attached to a modem or router elsewhere in your house.If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks are Dynamic Networks.Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).If you have a Windows computer, you can also get these values through your computer. The Modem Port on the WallModem Cable LAN CableLAN Port on TVExternal Modem(ADSL / VDSL / Cable TV) LANThe Modem Port on the WallModem Cable LAN Cable LAN CableLAN Port on TVExternal Modem(ADSL / VDSL / Cable TV) IP Sharer (Router)(with DHCP server) LANThe LAN Port on the Wall LAN Port on TVLAN CableLANNOTEYou can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses.
21Advanced FeaturesNetwork Setup (Auto)Use the Automatic Network Setup while your connecting the TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:How to set up automatically 1.Connect your TV to your LAN as described in the previous section. 2.Turn on your TV, operate according to the description in the Settings menu until the Network screen appears.3.On the Network screen, select Configuration and press [ENTER] button to enter the submenu.4.Set Internet Connection to On and Interface to Ethernet.5.Select IP Setting and press [ENTER] button to enter it.6.Set Address Type to Auto.7.Auto acquires and enters the necessary connection  values automatically.8.If the connection values are not automatically entered, please check your modem and router manuals for Network Setup (Manual)Use the Automatic Network Setup when connecting your TVto a network that requires a Static IP address.Getting the Network Connection ValuesTo get the network connection values on most windows computers, follow these steps:1.Right click the Network icon on the bottom right of the screen.2.In the pop-up menu that appears, click Status.3.On the dialog that appears, click the Support tab.4.On the Support tab, click the Details button. The network connection values are displayed.How to set up manuallyTo set up your TV’s network connection manually, follow these steps:1.Follow Steps 1 through 5 in the “How to set up automatically” procedure.2.Set Address Type to Manual.3.3UHVV>Ÿź@EXWWRQWRVHOHFW,3$GGUHVVDQGSUHVV>ŻŹ@button to move the cursor to the entry field. Then press 0~9 buttons to enter the numbers.4.3UHVV>0(18@EXWWRQWRH[LW,3$GGUHVVDQGSUHVV>Ÿź@button to select the next options to enter the numbers. 5When done, press [MENU] button to return to the previous menu.6.Select Connection Test to check the internet connectivity.  SettingsSelect connection typeInternet ConnectionInterfaceWireless SettingInformationIP SettingConnection Test OnEthernet   Select BackSettingsAddress TypeIP AddressSubnet MaskDefault GatewayPrimary DNSSecondary DNSAuto176.       16.       0.       0255.    255.    255.    255172.    16.    0.    0172.    16.    2.    20.       0.       0.       0   Select BackSettingsAddress TypeIP AddressSubnet MaskDefault GatewayPrimary DNSSecondary DNSManual0.       0.       0.       00.       0.       0.       00.       0.       0.       00.       0.       0.       00.       0.       0.       0   Select BackSettingsInitiate networkconnectionLanguageMenu SettingsTime SetupCaptionNetworkDemo ModeVersion InfoReset DefaultEnglishEnter Select ExitOKdirections to enable automatic IP addressing by DHCP.  Or, follow the steps listed to the follow to manually configure the network connection.
22Advanced FeaturesConnecting to a Wireless NetworkTo connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below. Hisense’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Hisense recommends using IEEE 802.11n router. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly. NOTESYou must use the Hisense’s built-in Wireless LAN Adapter to use a wireless network, the set doesn’t support external USB network adapter.To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure.If you apply a security system other than the systems listed below, it will not work with the TV.  If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-AES (WPS2 Mixed) for your Access Point (AP), Hisense TVs will not support a connection in compliance with new Wi-Fi certification specifications.If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.Connection Methods: You can setup the wireless network connection three ways.  -Scan  -Manual  -AutoWireless IP Sharer(Router)(with DHCP Server)LAN CableWireless LAN Adapterbuilt-in TV setThe LAN Port on the Wall
23Advanced FeaturesWireless SettingHow to set up1.Turn on your TV, operate according to the description in the Settings menu until the Network screen appears.2.On the Network screen, select Configuration and press [ENTER] button to enter the submenu.3.Set Internet Connection to On and Interface to Wireless.4.Select Wireless Setting and press [ENTER] button to enter it.You can select: Scan\Manual\Auto.5.If you select Scan, a screen will appear listing all of the ZLUHOHVVQHWZRUNVZLWKLQUDQJHRIWKH798VHWKH>Ÿź@keys to select the wireless network with your router SSID and press [ENTER] to confirm. Proceed to Step 7.6.If you select Manual, a screen will appear prompting you to enter the SSID of your wireless network. Press [ENTER] and an on-screen keyboard will pop up.  Enter the SSID and select OK. Press [ENTER] to confirm and a screen will appear prompting you select the security PRGHIRU\RXUZLUHOHVVQHWZRUN8VHWKH>Ÿź@NH\Vto select the proper security mode and press [ENTER] to confirm. If you selected None for the security mode, proceed to step 9.7.A screen will appear prompting you to enter the password for the selected security mode. Press [ENTER] and an on-screen keyboard will pop up. Enter the password and select OK. Press [ENTER] to confirm. Proceed to Step 9.8.If you select Auto, a screen will appear prompting you to select PIN (personal identification number) or PBCSettingsSetup wirelessconnection.Internet ConnectionInterfaceWireless SettingInformationIP SettingConnection Test OnWirelessEnter Select ExitOKSettingsInitiate networkconnectionLanguageMenu SettingsTime SetupCaptionNetworkDemo ModeVersion InfoReset DefaultEnglishEnter Select ExitOKDLNA SettingsComputer, TV and other digital devices can be connectedvia DLNA and they can share files with each other. Youcan use the TV set as a DLNA DMP (Digital Media Player)device to enjoy movies, pictures, music and other multimediamaterials in your computer through DLNA connection.DLNA Setting needs to be set on TV and computer Respectively.Network Setup:1.Turn on your TV, operate according to the description inthe Settings menu until the Network screen appears.2.On the Network screen, select Configuration and press[ENTER] button to enter the submenu.3.Set Internet Connection to On and Interface to Ethernet.4.Select IP Setting and press [ENTER] button to enter it.5.Set Address Type to Auto.6.Auto acquires and enters the necessary connectionvalues automatically.7.If the connection values are not automatically entered,please check your modem and router manuals for directions to enable automatic IP addressing by DHCP.Or, follow the steps below to manually configure thenetwork connection.SettingsAddress TypeIP AddressSubnet MaskDefault GatewayPrimary DNSSecondary DNSAuto176.       16.       0.       0255.    255.    255.    255172.    16.    0.    0172.    16.    2.    20.       0.       0.       0   Select Back(push button configuration) setup. Choose the methodsupported by your wireless access point.8a.If you choose PIN, an identification number will appear on the screen for you to enter into the access point. After HQWHULQJWKH3,1SUHVVWKH>Ź@NH\,IWKH3,1LVLQXVHby another device, select [REFRESH] to obtain a newPIN and enter it into the access point. After entering the3,1SUHVVWKH>Ź@NH\8b.If you choose PBC, a screen will appear prompting toSUHVV>Ź@NH\$IWHUSUHVVLQJWKH>Ź@NH\\RXKDYHWZRminutes to locate and press the Push Button on your access point to connect to the TV.9.Press the [MENU] key to return to the previous menu.10.Select Connection Test to check the Internet connectivity.
24Advanced FeaturesTo set up your TV’s network connection manually,follow these steps:1). Follow Steps 1 through 5 in the “How to set upautomatically” procedure.2). Set Address Type to Manual.8.Set Address Type to Manual, enter IP Setting. Thenpress [▲/▼] button to select IP Address and press [   button to move the cursor to the entry field. Then press0~9 buttons to enter the numbers.9. Press [MENU] button to exit IP Address and press [▲/▼]button to select the next options to enter the numbers.10. When done, press [MENU] to return to the previousmenu.11.Select Connection Test to check the Internet connectivity.Set DLNA to On:1.On the Network screen, select Applications and press [ENTER] button to enter the submenu.2. Press            button to set DLNA to On.SettingsSet DLNA on or oDLNANetixVUDUOn   Select BackMedia Share Settings in ComputerSettings to Share Files  llatsni yam uoy ,ANLD troppus ton seod retupmoc ruoy fIsoftware that supports DLNA such as TVersity or Windows Media Player. We recommend Windows Media Player as the installation and setup is easier.1.Start the Windows Media Player 11 or later version.2.Click “Library” and then “Add to Library...”.3.The “Add To Library” will pop up on the screen. Click “Add”.4.Select a folder and click OK button.5.Click “Close” to close the dialog.1.Click “Library” and move the cursor to select  “MediaSharing...”SettingsAddress TypeIP AddressSubnet MaskDefault GatewayPrimary DNSSecondary DNSManual0.       0.       0.       00.       0.       0.       00.       0.       0.       00.       0.       0.       00.       0.       0.       0   Select Back[press [[▲     /▲]                    [2.Press  ▲      /  ▲      ]
25Advanced FeaturesNetwork FunctionNOTICE FOR USEIf you use VUDU services, see the following note before using it.1. Use of Internet services requires a working broadband Internet connection (1 to 2 Mbps for SD video, 2.25 to 4.5 Mbps for HD video and 4.5 to 9 Mbps for HDX video).2. VUDU and other Internet-based services are not provided by Hisense, may change or be discontinued at any time and may be subject to restrictions imposed by your Internet service provider. The quality, functionality, or availability of such services may be affected by the capacity of your Internet connection. Use of VUDU video-on-demand and other Internet services may require the creation of a separate account through a computer with internet access.3. Certain VUDU services may not be available for this TV model.4. VUDU video-on-demand and other Internet services may require payment of one-time and/or recurring charges.5. You are solely responsible for any charges incurred as a result of using Internet-based content, including, without limitation, communications charges for the provision of Internet or network services and any charges incurred for third-party Internet content services, such as video on demand or subscription services. All third-party services are provided in accordance with whatever terms and conditions are established between such third-party providers and you.6. HISENSE MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE CONTENT, AVAILABILITY OR FUNCTIONALITY OF THE VUDU SERVICE OR OTHER INTERNET DELIVERED THIRD-PARTY SERVICES AND DOES NOT WARRANT THAT ANY OF THEM WILL BE UNINTERRUPTED, ERROR FREE OR SATISFACTORY. ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF ANY THIRD PARTY CONTENT OR SERVICE, IS EXPRESSLY EXCLUDED AND DISCLAIMED. UNDER NO CIRCUMSTANCES WILL HISENSE BE LIABLE IN CONTRACT, TORT OR UNDER ANY OTHER THEORY FOR ANY DAMAGES ARISING OUT OF OR IN CONNECTION WITH YOUR USE OF ANY CONTENT OR SERVICE PROVIDED BY ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.2. Click the box to select “Share my media” and click [OK].3. An equipment icon will appear on the white area if the DLNA Settings has been correctly set. Select the  appropriate icon and then click “Allow”.4. The TV now has access to the shared files on the computer.
26Advanced FeaturesOperational buttonsButtons DescriptionPress to launch VUDU Movies App directly.Opens the Hi-Smart Hub with links to variousInternet Services.Press to launch Netflix App directly.▲/▼/   / Selects the on-screen menu items.    ENTER Confirms selections.     EXIT Closes the menu.  RETURN Returns to the previous menu.Stops playback and displays the movie titlescreen.Pauses playback. Press the button to return toplayback.Displays the TrickPlay screen and fast forwardsplayback.Displays the TrickPlay screen and fast reversesplayback.Plays the next video. Plays the previous video. 1. Press the [Hi-Smart] button to display Hi-Smart Hub.2. Press [▲▲▲▲▲/▼/ / ]buttontoselecttheinterfaceyouwant to view and press [ENTER] to enter the followingdescription.No Interface description1Live TV2Information3Apps Market4My Applications5Quick Launcher BarEnter the Network Applications▲▲VUDU HD MoviesBrief introductionVUDU is an on-demand service that offers high-definitionmovies on Web.For enjoying more movies, please register and log in toyour account.Operation instructionsYou can access the VUDU HD Movies by the followingmethod:1. Press the [Hi-Smart] button to display network mainmenu.2. Press [▲/▼/ / ] button to select the VUDU HD Moviesicon and press [ENTER] to enter it (Refer to “Enter thenetwork application”), or press [VUDU] button to enterdirectly.3. Select the Sign Up Now icon on the VUDU HD Moviesinterface, and press [ENTER] to enter.TV Input Picture Video Music Network DLNA12345DDIISSPPLLAAYYEEXXIITTRREETTUURRNNGGUUIIDDEEMMEENNUUHHii--DDMMPPHii--SmmaarrttAASSPPEECCTTEENNTTEERRHii--Smmaarrtt
27Advanced Features4. Please read the content of the Disclaimer first. If agree,press [Green] button and then access the network mainmenu. If disagree, press [Red] button or [Yellow] buttonto cancel or exit Disclaimer menu, then network cannotbe used.5. Enter your email address to start your VUDU experience.  ( Refer to “How to Input the Email Address”  )6. Press                 button to move the cursor to select service items in the VUDU HD Movies home page, and press [ENTER] button to confirm.7. In the process of watching a movie, press [ENTER] button to display/exit the tool bar, press [   /   ] button to select the function icon, and press [ENTER] button to confirm. 8. Press [RETURN] button to return the upper menu, or press [EXIT] button to close the menu.Tool Bar1. Press [ENTER] button to enter and press [   /   ] button to select the chapter. 2. Stop playback.3. Fast backward. Press [ENTER] button to select the backward speed. You can press [ ] button to achieve the function.4. Play/Pause. You can press [ II] button to play/pause directly when there is no control bar on the screen.5. Fast forward. Press [ENTER] button to select the forward speed. You can press [ ] button to achieve the function.6. Progress bar. The progress bar when playing.How to Input the Email Address1. Press [ button to move the cursor to the address bar and press [ENTER] button to confirm.0:00:34                          0:02:32Chapters234512. Press [ENTER] button to display the keyboard.There are some shortcuts on the bottom of the keyboard so that you can input part of the address often used directly.Other keys are used as the keyboard of your computer. 3. Press [ button to move the cursor to the characters you want to select and then press [ENTER] button to confirm. If you want to delete one character, move the cursor to Back key   and press [ENTER] button to confirm.4. Move the cursor to Done key and press [ENTER] button to confirm if you have completed the address input. Then the new address will appear on the address bar.VUDU HD Movies home pageabcde fghi j k lmnopq r s t uvwxyz0123456789@.comSymbols Space ShiftEnter email addressBack DoneEnter email addressEnter email address to begin enjoying VUDU!NOTETV screen may be difference with picture.6Press  for helpTitle FunctionNew The latest moviesTop Picks Mostly picked up moviesTop Rentals Mostly rented moviesNew Trailers Latest trailersComing Soon The movies can be picked soonBrowse Browse all the movies in VUDUCollections Browse the classified moviesMy VUDU The movies user bought or rentedSearch Search movies in VUDU///]▲/▼//]▼▼▲▼▼▼▲▼▼▼▼▼▼▼▼[///]
28Advanced FeaturesVUDU HD Movies subpageTitle FunctionRent/Own To rent or buy current movieWatch Trailer To watch trailer of the current movie2 Minute PreviewTo preview current movie for 2 minutesAdd to Wishlist Add current movie to your wishlistRate/share To rate current movie or share it to your friends in Facebook or TwitterOverview The overview of current movieCast&Crew The cast and crew of current movies and find their related movies Reviews The reviews of current movieSimilar The similar types of moviesMore Info The detail information of current movieVUDU AppsBrief introductionThe applications platform for connected TVs.VUDU Apps provides customers with access to a wide range of Internet services and applications including streaming video, music on demand, photo browsing, social networking and more.VUDU Apps supports the development of responsive apps designed specifically for use on home HD televisions.VUDU Apps uses a unique, cloud-based architecture optimized for consumer electronics devices, including delivering the latest applications to consumers without the need for software downloads or frequent firmware updates.Operation instructionsYou can access the VUDU Apps by the following methods:1. Press the [Hi-Smart] button to display network main menu.2. Press [                   button to select the VUDU Apps icon and press [ENTER] to enter it.3. Press [                   button to select the widget you want to access, and press [ENTER] to enter it. 4. You can press [RETURN] to return the upper menu or press [EXIT] button to close the Widgets display.VUDU Apps home pageMY FAVORITESMOST POPULARNEWESTBROWSE BY GENRESHOW TICKERINFO&SETTINGSTitle FunctionMy favorites The user’s favorite applicationsMost popular The most popular applications Newest The newest applications in VUDUBrowse by genre Browse applications by genre Show Ticker Show the applications at the bottom of screen while watching TVInfo&settings VUDU Apps system informationNetflixBrief introductionInstantly watch thousands of TV episodes & movies streaming over the Internet from Netflix. Unlimited membership required.NOTESTV screen may be difference with picture.For more information on Netflix visit http://www.netflix.com/help or login to your Netflix account and click “Help” at the top of the page.Your broadband fluency and picture quality depend on the network speed and original bit rate.Illustrations are examples and may differ from the actual Netflix screens. The display and operations may change as a result of a software update. Use Netflix without configuring a proxy server. Part or all of Netflix may not be available when connecting to the Internet via a proxy server.          [▲/▲/▲/▲]                               ▲/▲/▲/▲]
29Advanced FeaturesOperation instructions1. Press the [Hi-Smart] button to display network mainmenu.2. Press [   button to select the Netflix icon andpress [ENTER] to enter it, or press [NETFLIX] button toenter Netflix website directly.3. Input Email and Password in following window to sign in. (Refer to “How to Input the Email Address”  )4. Press [ button to move the cursor to selectservice items in the Netflix home page, and [ENTER]button to confirm.5. In the process of watching a movie, press operationalbuttons to control the movie. 6. Press [RETURN] button to return the upper menu, orpress [EXIT] button to close the menu.Netflix Movies home pageTitle FunctionSuggestions foryouThe movies suggested for you byNetflixNew Arrivals The new arrivalsGenres Browse movies in different genresInstant Queue Your list of moviesSearch Search for available titlesOperaThe function of the buttons on the remotecontrolOperation instructionsHow to enter the Opera BrowserThe Network setup must be correct. Then you can usethe network.1. Press the [Hi-Smart] button to display network mainmenu.2. Press [                  button to select the opera icon andpress [ENTER] to enter it.3. Then the default interface will appears on the screen.There are some function icons on the bottom of thescreen:The function of the buttons on the screen:1. Back to main page.Move the cursor to the icon and press [ENTER] button toreturn to the default interface.2. Back to previous page.Move the cursor to the icon and press [ENTER] button toreturn to the previous viewed web page.3. Return a page.Move the cursor to the icon and press [ENTER] button togo forward to the previous viewed web pages.Buttons DescriptionPress these buttons to move the cursor on thescreen as the mouse of the computer.    MENU Press the button to display/cancel the keyboardon the screen.    ENTER Press the button to confirm the selection. Pressthe button twice to search the new website.213456 91078 Address bar▲/▲/▲/▲]▲/▲/▲/▲▲/▲/▲/▲]▲/▲/▲/▲]"?
30Advanced Features4. Refresh page.Move the cursor to the icon and press [ENTER] button to refresh the current page.5. Folder.Move the cursor to the icon and press [ENTER] button to enter the favorite folder.6. Add Folder.Move the cursor to the icon and press [ENTER] button to add the website to the favorite folder.7. Help.Move the cursor to the icon and press [ENTER] button for help.8. Address bar.Input the website you want to view.9. Sure to enter the Address of the pageMove the cursor to the icon and press [ENTER] button to search the website.10. Exit Opera.Move the cursor to the icon and press [ENTER] button to close the page.How to Input the New Address1. Press            button to move the cursor to the address bar and press [ENTER] button to confirm.2. Press [MENU] to display the keyboard.There are some shortcuts on the bottom of the  keyboard so that you can input part of the address often used directly.Other keys are used as the keyboard of your 3.    eht ot rosruc eht evom ot nottubsserPcharacters you want to select and then press [ENTER] button  to confirm. If you want to delete one character, move the cursor to Back key and press [ENTER] button to confirm. Or if you want to re-enter all the characters, move the cursor to Reset key and press [ENTER]button to confirm.4. Move the cursor to Enter key and press [ENTER] button to confirm if you have completed the address input.Then the new address will appear on the address bar.5. Move the cursor to the address bar and press [ENTER] button twice to enter the website.Or move the cursor to the   and press [ENTER] button to search.CN12wsxedcrfvtgbyhnujmik,ol.p;/[‘]EnterSpace\qazTabCaps LShifthttp:// www. .com .org .gov .net Reset3 4 5 6 7 8 9 0 - = BackǃNOTEThere is only recommend to open the English website. [▲▲▲/▼//]  [▲▲▲/▼//] How to Add a BookmarkIf you want to find the often viewed website from the favorite folder, you can follow the steps to add it to the folder.1. Input the address on the address bar and enter it.2. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRWKH andpress [ENTER] button to confirm. The menu will pop up on the screen.3. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRWKHLFRQmarked with dashed box on the right screen. Then press [ENTER] button to confirm to display all the folders.4. 3UHVV>Ÿź@EXWWRQWRVHOHFWWKHIROGHU\RXZDQWWRDGGthe bookmark to. And press [ENTER] button to confirm.5. Move the cursor to the Add button and then press [ENTER] button to confirm.If you do not want to add the book mark, move the cursor to the Cancel button and press [ENTER] button to confirm.How to Add a FolderYou can add a folder to the favorite as follows:1. Move the cursor to the   icon and press [ENTER] button to confirm. The menu will pop up on the screen.2. Move the cursor to Add a folder button and press [ENTER] button to confirm.A pop-up menu appears on the screen.3. Move the cursor to Name bar and press [ENTER] button to confirm. Follow the steps 2~4 in “How to Input the New Address” to input the name.4. Move the cursor to Add button and press [ENTER] button to confirm and the new folder has been added. Add a bookmarkAre you sure to add it?Name:URL:Folder:Add                CancelHISENSEHttp://www.hisense.com.au/Root folderAdd a bookmarkAre you sure to add it?Name:URL:Folder:HISENSEHttp://www.hisense.com.au/Root folderRoot folderOpera SoftwareGOGI SDKOpera technology
31Advanced FeaturesHow to Edit/Delete a Folder/Bookmark1. Move the cursor to the   icon and press [ENTER] button to confirm. The menu will pop up on the screen.2. Move the cursor to the folder /bookmark directly and there will be two icons on the right of it. Move the cursor to one of the icons and press [ENTER] button to display a pop-up menu.: Edit button.1).Move the cursor to the Name/URL bar and press [ENTER] button to confirm. Follow the steps 2~4 in “How to Input the New Address” to edit it.2).Move the cursor to Edit button , then press [ENTER] to confirm and the folder/bookmark will be saved.: Delete button.Move the cursor to the Delete button and press [ENTER] button to confirm. Then the folder/bookmark will be deleted from the favorite folder.Add a folder                          Close bookmark managerOpera SoftwareGOGI SDKOpera technologyHISENSE Name:Add                CancelAdd a bookmarkAre you sure to add it?Http://www.hisense.com.au/"Add a folder                          Close bookmark managerOpera SoftwareGOGI SDKOpera technologyHISENSEName: HISENSEEdit                 CancelEdit this bookmarkAre you sure to edit it?URL: http://www.hisense.com.au/help/warrantyHttp://www.hisense.com.au/"Add a folder                          Close bookmark managerOpera SoftwareGOGI SDKOpera technologyHISENSEName: HISENSEDelete            CancelDelete this bookmarkAre you sure to delete it?URL: http://www.hisense.com.au/help/warrantyHttp://www.hisense.com.au/"NOTEThere is only Name bar on the pop-up menu for folder. How to select the Website from the favorite folder1. Move the cursor to the   icon and press [ENTER] button to confirm. The menu will pop up on the screen.2. Move the cursor to the   icon before the folder name and press [ENTER] button to confirm. The websites in the folder will appear in the following lines.3. Move the cursor to the website you want to view and press [ENTER] button to confirm.If the website is in the root folder, you can select it  directly . And do not need operate as step 2.How to exit the managerAdd a folder                          Close bookmark managerOpera SoftwareGOGI SDKOpera technologyHISENSEHttp://www.hisense.com.au/"Move the cursor to the Close bookmark manager icon and press [ENTER] button to confirm.Brief introductionWatches the video via YouTube.Operation introduction1. Press the [Hi-Smart] button to display network main menu.2. 3UHVV>ŸźŻŹ@EXWWRQWRVHOHFWWKH<RX7XEHLFRQDQGpress [ENTER] to enter it. YouTube
32Operation introduction1.Press the [Hi-Smart] button to display network main menu.2.3UHVV>ŸźŻŹ@EXWWRQWRVHOHFWWKH2WKHU$SSVDQGpress [ENTER] to enter it.3.Follow the steps as following.My Apps:Display the applications of downloaded and installed on the local.1)3UHVV>ŻŹ@WRVHOHFWWKHWLWOHRI0\$SSVDQGSUHVV>źENTER] to enter it.2)3UHVV>ŸźŻŹ@WRVHOHFWWKHDSSOLFDWLRQV\RXZDQWWRenter and press [Enter] to confirm.3)Press [RETURN] to return to the title.New Arrival:1)3UHVV>ŻŹ@WRVHOHFWWKHWLWOHRI1HZ$UULYDODQGSUHVV>źENTER] to enter it.Other AppsTitleFunctionMy Apps. Your local applicationsNew ArrivalThe applications of the latest onlineMore Apps. Applications classification to downloadHotlistThe pop ranking applicationsManagementDelete the local applications SelfServiceView the service informationAdvanced Features2)3UHVV>ŸźŻŹ@WRVHOHFWWKHDSSOLFDWLRQV\RXZDQWWRinstall and press [ENTER] to confirm.3)Press [ENTER] to install the applications or press[RETURN] to return to the new arrival home page.If installed, the application will be shown in My Appsinterface.4)Press [RETURN] to return to the title.More Apps:Classify the applications by story, knowledge and funnygame.1)3UHVV>ŻŹ@WRVHOHFWWKHWLWOHRI0RUH$SSVDQGSUHVV>źENTER] to enter it.2)3UHVV>Ÿź@WRVHOHFW WKHFODVVLILFDWLRQDQGSUHVV[ENTER] to confirm.3)3UHVV>ŸźŻŹ@WRVHOHFWWKHDSSOLFDWLRQV\RXZDQWWRinstall and press [ENTER] to confirm.4)Press [ENTER] to install the applications or press [RETURN] to return to the More Apps home page.KNOWLEDGEFUNNY GAMEPage  1/2Navy Bat...    Tetris          Penalty        dress-up        DICE         GUESS NUNavy Bat...    Tetris          Penalty        dress-up        DICE         GUESS NUPenalty        dress-up        DICE         GUESS NU
33Advanced FeaturesIf installed, the applications will be shown in My Apps interface.Hotlist:1)3UHVV>ŻŹ@WRVHOHFWWKHWLWOHRI+RWOLVWDQGSUHVV>źENTER] to enter it.2)3UHVV>ŻŹ@WRSDJHXSGRZQDQGSUHVV>Ÿź@WRVHOHFWthe applications you want to install and press [ENTER] to confirm.3)Press [ENTER] to install the applications or press [RETURN] to return to the Hotlist homepage.If installed, the applications will be shown in My Apps interface.4)Press [RETURN] to return to the title.Management:1)3UHVV>ŻŹ@WRVHOHFWWKHWLWOHRI0DQDJHPHQWDQGSUHVV>ź(17(5@WRHQWHULW2)3UHVV>ŻŹ@WRSDJHXSGRZQDQGSUHVV>Ÿź@WRVHOHFWthe applications you want to delete.3)Press [ENTER] to display the menu.4)3UHVV>ŻŹ@WRVHOHFW<HV1RDQGSUHVV>(17(5@WRdelete.5)Press [RETURN] to return to the title.Are you sure?SelfService:3UHVV>ŻŹ@WRVHOHFW WKH WLWOHRI6HOI6HUYLFHDQGSUHVV[ENTER] to view the service information.VUDU customer care: To learn more about VUDU, visit the frequently Asked questions at www.vudu.com/support.1HWÀL[FXVWRPHUVHUYLFH:US: (866) 716-0414Canada: (866) 348-2353Other InformationOur Promise   Thanks for you and your family choose Hisense Smart TV, we will   continue to provide better and more services.Service Information   If your TV meet quality problem, please kindly let us know, we will   make every effort to serve you.Appstore Version   1.0.29.0Device ID   861003009000006000000150FE1FC402Penalty  1.0Hitv Issued In 2012-01-07 1Dress-up  1.0Hitv Issued In 2012-01-07 2DICE  1.0Hitv Issued In 2011-12-13                        3Guess nu  1.0Hitv Issued In 2012-01-12 4Penalty  1.0Hitv Issued In 2011-12-13                        5Page  1/2Dress-up  1.1Valid until:2099-12-31 Size:2.73MDICE  1.0Valid until:2099-12-31 Size:5.48MGuess nu  1.0Valid until:2099-12-31 Size:5.88MPenalty  1.0Valid until:2099-12-31 Size:1.66MPage  1/2
34Advanced Features1.Press[RED]button to switch to All or Video.2.Press [ŸŸ/Ÿ/Ÿ] to select the video you want to view.3.Press [ENTER] to play the video.4.Press [/RETURN] to exit the video and return to theprevious directory.5.Press [ENTER] button to display/exit the video controlbar.6.3UHVV>ŻŹ@EXWWRQWRVHOHFWWKHIXQFWLRQLFRQDQGWKHQpress [ENTER] to confirm.Tool bar 1.The progress bar when playing.2.3OD\3DXVH<RXFDQSUHVV>Ź,,@GLUHFWO\WRSOD\SDXVHwhen there is no control bar on the screen.3.Play the previous video. You can press [] directly to achieve the function when no control bar display on the screen.Please note that Hisense will not assume any responsibility for any lost data and cannot guarantee perfect compatibility with all mass storage devices. Be sure to insert the USB disk or mobile hard disk with standard USB2.0 port.Press [INPUT] button to display the INPUT menu, press  >Ÿź@EXWWRQWRKLJKOLJKWWKH+L'03VRXUFHWKHQSUHVV[ENTER] button to confirm. (If you want to exit Hi-DMP, you can press [INPUT] button to switch to other sources).Press [RED] button to switch the media typeILOWHU.Press [YELLOW/BLUE] to turn to the previous/next page.1.3UHVV>ŸźŻŹ@EXWWRQWRVHOHFWWKHIROGHUILOH\RXZDQWto open and then press [ENTER] to enter/play the folder/file.2.Press [RETURN] to return to the previous directory.Digital Media PlayHUEnjoy Video FilesNOTEYou can press [ASPECT] button to change the aspect ratio (Normal, Full Screen, Original Size) while playing the video.DMP           C:Informationm.mp3Select Enter Return Type Filter Page up/downReturn              F1               F2              F3P.jpg               m.mp3        v.dat            t.txtAllVideoMusicPictureBook4.Play the next video. You can press [] to achieve the function when no control bar display on the screen.5.Fast backward. Then press [ENTER] to select the backward speed. You can press [] to achieve thefunction.6.Fast forward. Then press [ENTER] to select the forwardspeed. You can press [] to achieve the function.7.Select time to play3UHVV>ŻŹ@WRVHOHFWWKHSRVLWLRQ\RXZDQWWRVHW3UHVV>a@WRVHWWKHWLPHDQGSUHVV>ŸźŻŹ@WRadjust it.3) Press [ENTER] to confirm and the video will to play at the time you have set.8.Play list3UHVV<HOORZ%OXHEXWWRQWRSDJHDQGSUHVV>Ÿź@WRselect the video.2) Press [ENTER] to confirm. And press [Exit] to exit the menu.9.Options3UHVV>Ÿź@WRVHOHFWWKHRSWLRQVLQWKHPHQX3UHVV>ŻŹ@WRVHOHFWWKHVHWWLQJV3) Press [ENTER] to confirm.10.Program infoAllows you to view the program information.11.Stop playbackOption SetRepeatPicture Mode                  Subtitle SelectionAUDIOOnceUserNOI/ISelect Enter ExitPlayable format listPlayable formatFiles FormatPhotoJPGMusicMp3VideoDivx 3.11/4.x/5.1/6.0, Windows-EDIAVideo v9, MPEG2123456789101100:00:36/00:20:01IIIḬ
351.Press[RED]button to switch to All or Music.2.3UHVV>Ÿ/Ÿ/Ÿ/Ÿ] to select the music you want to view.3.Press [ENTER] to play the music.4.$OOWKHVRQJVDUH OLVWHGRQWKHOHIW3UHVV>Ÿź@EXWWRQWRVHOHFWWKHVRQJDQGSUHVV>Ź@EXWWRQWRPDUNLW<RXFDQpress [YELLOW/BLUE] button to turn to the previous /next page.  Press [GREEN] button to select the Mode: Mark/All/Single.5. Press [RETURN] to exit the music playback interface.1.Press[RED] button to switch to All or Picture.2.3UHVV>Ÿ/Ÿ/Ÿ/Ÿ] to select the picture you want to view.Advanced FeaturesEnjoy Music FilesBrowse the PicturesCurrent Playing: a3.mp3a1.mp3m.mp3a2.mp3a3.mp301/01Mode: NoneStatus:  Play             Title: a1Artist:Album:Genre: OtherYear:Duration:00:04:13Next:00:00:24/00:04:13Mode Select ReturnMark Play/PausePage up/downDMP           C:\ musicInformationmusicSelect Enter Return Type Filter Page up/downReturn              F1               F2              F3a1.mp3        m.mp3        a2.mp3         a3.mp3 AllVideoMusicPictureBookDMP           C:\ PictureInformationPicturejpg257:383Select Enter Return Type Filter Page up/downReturn           1.jpg            2.jpg           3.jpgAllVideoMusicPictureBook3.Press [ENTER] to browse the picture.4.Press [/RETURN] to exit the picture and return to theprevious  directory.Tool bar When browsing the picturesPress [ENTER] button to display/exit the picture controlEDUDQGSUHVV>ŻŹ@EXWWRQWRVHOHFWWKHIXQFWLRQ LFRQand then press [ENTER] button to confirm.1.Browse the previous picture. You can press[ ] button directly to achieve the function when no control bar displays on the screen.2.Browse the next picture. You can press [ ] buttondirectly to achieve the function when no control bar displays on the screen.3.Allows the picture to rotate 90 degrees clockwise.4.Allows the picture to rotate 90 degrees anti-clockwise.5.Play/pause. You can press [ENTER] button directlywhen no control bar on the screen.6.6WRSEURZVLQJWKH SLFWXUH<RXFDQSUHVV>Ŷ@EXWWRQdirectly when no control bar on the screen.7.Zoom in the picture.8.Zoom out the picture.9.2SWLRQ6HW3UHVV>Ÿź@EXWWRQWRVHOHFWWKHRSWLRQVDQGSUHVV>ŻŹ@EXWWRQWRVHWWKHPSpeed - Allows you to browse the picture at differentspeed.Effect -  Allows you to set how the picture appears onthe screen.Background Music - Allows you to enjoy the music whenbrowsing the pictures if it is set On.10.Picture info. Allows you to view the picture information.Option SetSpeedEffectBackground MusicFastNoneOffEnterIII ̰2345678910
36Browse the Text FilesAdvanced Features1.Press [RED] button to switch to All or Book.2.3UHVV>ŸŸ/Ÿ/Ÿ] to select the text you want to view.3.Press [ENTER] button to confirm.4.Press [/RETURN] to exit the text and return to theprevious directory.Tool bar:KHQEURZVLQJWKHWH[W¿OHVWhen no tool bar appears on the screen, you can press >Ÿź@WRPRYHWKHWH[WOLQHVXSGRZQ3UHVV>(17(5@WRGLVSOD\H[LWWKHWRROEDU3UHVV>ŻŹ@to select the corresponding icons and then press [ENTER] to confirm.1.Stop/resume automatic page 2.View the previous page. 3.View the next page. 4.Stop browsing.5.Allows you to select page to view.3UHVV>a@EXWWRQVWRLQSXWWKHSDJHRUSUHVV>Ÿź@to adjust it.3UHVV>ŻŹ@ WR VHOHFW (QWHUDQGSUHVV>(17(5@WRconfirm.DMP           C:\TXTInformationTXTSelect Enter Return Type Filter Page up/downReturn             1.txt            2.txt             t.txtAllVideoMusicPictureBookGoto Page0000 Enter1.txt                                                                        1/16     Status:Play21345IḬII
37Other InformationTrouble ShootingWhen something appears wrong with your TV refer to below chart. If the proposed remedy’s do not work , then unplug the AC cord from wall, wait at least 60 seconds, plug AC back in and then turn on the TV. If the problem still cannot be solved, please contact the help line provided on the warranty card or a professional technician.SYMPTOMS POSSIBLE   SOLUTIONSNo sound or picture.Check if the power cord is plugged into AC outlet and if it has electricity.Check if you have pressed [POWER] button on the TV or [POWER] button on the remote control.Check to see if LED light is either red or blue. If illuminated, power to TV is OK.I have connected an external source to my TV and I get no picture and/or sound.Check for the correct output connection on the external source and for the correct input connection on the TV.Make sure you have made the correct selection for the input mode for the incoming signal.When I turn on my television, there is a few second delay before the picture appears. Is this normal?Yes, this is normal. That is the TV searching for previous setting information and initializing the TV.Picture is normal, but no sound. Check the volume settings.Check if Mute mode is set “on”.Sound but no picture or black and white picture.If black and white picture first unplug TV from AC outlet and re-plug after 60 seconds.Check Color Setting if picture is black and white.Sound and picture distorted or appear wavy.An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes away, move appliance farther away from TV.Insert the power plug of the TV set into another power outlet.Sound and picture is blurry or cuts out momentarily.If using an external antenna, check the direction, position and connection of the antenna.Adjust the direction of your antenna or reset or fine tune the channel.Horizontal/vertical stripe on picture or picture is shaking. Check if there is interfering source nearby, such as appliance or electric tool.The plastic cabinet makes a “clicking” type of sound.“Click” sound can be caused when the room temperature changes. This change causes the television cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.Black square appears in the center of my television screen?The Closed Caption function is set in the text mode. To remove it, access Closed Caption from the menu screen and change the Mode setting from text to either CC1 or off .On some channels getting another language or sometimes no sound at all.That would indicate that the MTS mode on your unit is set to “SAP” mode. We suggest setting the MTS mode to either “Stereo” or “Mono”. For further instruction, please see “MTS” in your user manual.SAP is Second Audio Program. It’s a second audio channel that is usually used for a second language or descriptive audio for the visually impaired.MTS stands for Multichannel Television Sound, a standard that allows the encoding of 3 channels of audio within a standard NTSC (analog) video signal to a television. A television that is able to receive MTS Stereo allows you to watch television with stereo sound.Not getting all of my cable channels on the television or I'm only getting 13 channels.Check the cable connection for an incoming signal. The best way to confirm signal is to use another TV and/or contact your cable company.[CHV / V] don't work when I set the Channel to Cable? They work with the Air setting?After switching to Cable, please auto program the channels. The TV will “remember” all the channels then the TV will allow you to surf the channels with [CHV / V] buttons.
38Other InformationSYMPTOMS POSSIBLE   SOLUTIONSRemote control does not work.Confirm that TV still has power and is operational.Change the batteries in the remote control.Check if the batteries are correctly installed.If using a universal remote, be sure to select the TV mode on the remote.If the remote still does not work:-remove and reinstall the batteries correctly to reset the remote or install new batteries.-press TV and then Power to turn on the TV. With a universal remote if you have reset or changed the batteries you will need to reprogram the remote for the other units.Network connection fail.Check network physical connection, make sure connection is correct.Enter “Menu”,”Settings”,”Network”,”Configuration” , make sure configuration is correct according to your network service provider.Enter “Menu”, “Settings”, “Network”, “Configuration”, “Connection Test” to make sure that network connection test is successful.Connect VUDU/Netflix fail.Check network connection is correct, both physically and configuration.Enter “Menu”, “Settings”, “Network”, “Configuration”, “Connection Test” to make sure that network connection test is successful.For VUDU: Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “VUDU”, “Deactivation” to reset VUDU account.For Netflix: Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “Netflix”, “Deactivation” to reset Netflix account.Log out VUDU/Netflix or change log in account.For VUDU:1. Press [EXIT] button on remote to exit VUDU. 2. Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “VUDU”, “Deactivation” to reset VUDU account.For Netflix:1. Press [EXIT] button on remote to exit VUDU. 2. Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “Netflix”, “Deactivation” to reset Netflix account.DLNA does not work.Check network connection is correct, both physically and configuration.Make sure DLNA server (PC or Mac) has shared media content and TV has permission to access shared media.Enter “Menu”, “Settings”, “Network”, “Applications”, turn on “DLNA”.Select Hi-DMP source to find shared contents. Select “Hi-DMP” source by using [INPUT] button on remote or press [Hi-Smart] button and then select “Multi-Media” Icon.How do I get the Hi-Smart Hub to work on my TV?You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps.Connect the TV to the Internet through your router by an ethernet cable or wireless connection. If the connection fails, check with your internet service provider or router manufacturer to determine if there is a firewall, content filter, or proxy settings that may block the TV from accessing the Internet.After connecting the TV to the Internet, press the [Hi-Smart] button on the remote to access the Hi-Smart Hub.Caution: Do not try to repair the TV yourself. Refer all servicing to qualified repair personnel.
39Other InformationGeneralNOTEFeatures, appearance and specifications are subject to change without notice.Model   Name 42K316DW 46K316DW 50K316DWDimensionWithout Stand (986×600×58 mm)38.8×23.6×2.3 in. 42×25.6×2.3 in.(1075×649.5×59.5 mm)45×27×2.2 in.(1150×688×56 mm)With Stand38.8×25.9×9.8 in.(986×657×250 mm)42×27.9×9.8 in.(1075×708×250 mm)45×29×11 in.(1150×745×285 mm)WeightWithout Stand 34 lbs. (15.5 kg) 45 lbs. (20.5 kg) 46.2 lbs. (21 kg)With Stand 39.7 lbs. (18 kg) 50.7 lbs. (23 kg) 53 lbs. (24 kg)LCD Panel Minimum size(diagonal) 42 inches 46 inches 50 inchesScreen resolution 1920 × 1080 1920 × 1080 1920 × 1080Audio power 8 W + 8 W 8 W + 8 W 10 W + 10WPower consumption Please refer to the rating label.Power supply AC 120 V ~ 60 HzReceivingsystemsAnalog NTSCDigital NTSC / ATSC / QAMEnvironmental conditionsTemperature: 41°F ~ 95°F (5°C~ 35°C)Humidity: 20%-80% RHAtmospheric pressure: 86 kPa - 106 kPaComponent Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 HzVGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)HDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768)The remote control requires: Number of Batteries: 2 Type: AAAYUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)

Navigation menu