Hisense Electric LCDE0009 LCD Monitor User Manual
Hisense Electric Co., Ltd. LCD Monitor
Contents
- 1. User manual part 1
- 2. User manual part 2
- 3. User manual part 3
User manual part 1
LOZSLLF’SE [0119ng Luoa'esn-asuasgu@a:)!/uas LUOD'BSn—BSUBSN'MMM 'segoueJe;eJ 52mm; med mamasuoo ‘|enu2u1 else swewepguelep ee| ‘JOS!I\S|91 |a Jezmm 9p se1uv OlHVflSfl 'IEICI 'lVflNVW HOZMQVj El:l|'| SI NOILVAONNI aozxzva asuang Hisense F42K20E INNOVATION Is LIFE F46K20E USER MANUAL Before using the TV, please read this manual thoroughly and retain it for future reference. www.hisense—usa.com service@hisense-usa.com English ES»J115201 CAUTION RISK OF ELECTRIC SHOCK DONOTOPEN CAUTIONITO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL FCC Statement The lightning flash with arrowhead symbol, Within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance, Energy Star NOTE: This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 cf the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance With the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ” Reorient or relocate the receiving antenna. ” Increase the separation between the equipment and the receiver. ‘ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected * Consult the dealer or an experienced radio/TV technician for help. 6 WARNING The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority, This TV incorporates High-Definition Multimedia interface (HDMI‘M) technology HDMi, the HDMi logo and HIthDelIHItIOH Multimedia interface are trademarks Your Hisense TV is ENERGY STAR ® qualified in the “Home" mode. It meets strict energy efficiency guidelines set by the US. Environmental Protection Agency and Department of Energy, ENERGY STAR is a joint program of these government agencies, designed ENERGY R to promote energy efficient products and practices Changes to certain features, settings, and functionalities of this TV (i e TV Guide, Picture, Sound) can increase or change the power consumption. Depending upon such changed settings, the power consumption may exceed the limits required for the ENERGY STAR qualification in the “Home" made i? NOTE Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable HEII'I'II~ or registered trademarks of HDMi Licensing LLC Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other countries. All othertradernarks are property of their respective owners 2011 H Manufactured under license from Dolby Laboratories Dolby and the doublerD ' Specifications subiecl to change Without notice 0‘ MP isense USA, Corporation All Rights Reserved. symbol are trademarks of Dolby Laboratories, CHILD SAFETY lt Makes A Ditt erence l—low nd Where ou Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE - The home theater entertainment expeiience is a grow rig trend and larger that panel displays are popular purchases l owever, Iioi panel displays are not always supported on the proper stands or ris’alled occoiding to the rriariulac'urer’s reconmendations . lla' panel displays that are inappropriately situated on dresse's, bookcases, shelves, desks, speakers, chests or cats may tall over and cause iniury THIS MANUFACTURER CARES! - The censu'ne' electrorics industry is committed to making home entertainment enioyable and so:e TUNE INTO SAFETY - One size does NOT lit all lollow ’he manulacturer’s recommenaations tor the sole installation and use ol your llat panel display ' Caretully read and understand all enclosed instruct ons tor proper use at this product - Don’t allow children to climb on or play with furniture and televis'ort sets 0 Don't place Hat panel displays on turniture that can easily be usea as steps, such as a chest at drawers 0 Remember that ch ldren can become exCited while watching a plOg'O't’t, CSpCClQlly on a ”larger than lite” tlat panel display Care should be taken to place or ltlS'Oll tne display where l' cannot be pushed, pulled over, or knocked down - Care should De ’aken to route all cards and cables connected to the int panel display so not tney cannot be pulled or grabbed by curious ch ldren WALL MOUNTING: IF YOU DECIDE T0 WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS: - Use a mount that has been recomnended by the display manulacturer ano/ar listed by an independent laborate'y (such as UL, CSA, Ell) ' Follow all instructions supplied by the display and wall mourt manutac'urers, - ll you have any doubts about your ability to solely install your tlot panel display, contact your retailer about professional ll‘SlOllGllOn mmcimmmnwm - Make sure tnot tne wall where you are mounting tne display is appiopiiote www.(E.org/suIety Some wall mounts are not designed to be mounted to walls with steel studs or old Cinder block construction lt you are unsure, contact a p'otessional installer ‘ A triini'riurri at two people aie requi'ed tor lFSlOllGllOn tlat panel displays can be heavy II NP’QF‘P’NT‘ Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water Clean only with dry cloth. Do not block any ventilation openings. Install in accordance With the manufacturers instructions. Do not install near any heat sources such as radiators. heat registers, stoves. or other apparatus (including amplifiers) that produce heat. . Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades With one wider than the other. A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet to Protect the power cord from being walked on or pinched 11 12. Use only with cart, stand, tripod, 13. particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, S3125A use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any Way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus. the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped 15. Apparatus should not be exposed to dripping or 16 17 18. splashing, and objects filled With liquids, such as vases, should not be placed on the apparatus An outside antenna System should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal. Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock. Do not push obiects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit. 19. lf an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built- up static charges. Section 810 of the National Electrical Code, ANSl/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the leadrin wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE or ANYENNA GROUNDlNG As an we NATlONAL ELECTRlCAL cooE ANTENNA [HEAD iN WlRE ANTENNA DlSEHARGE UNlT (NEG sem ioN siozoi GROUNDlNG coNoucroRs lNEC SECTlON 31%le FlFCTRlc sFchF EuulVMENT . NEC NATIONAL GROUND CLAMPS ' a, VowER SERVlcE GROUNDlNG ELECTR‘CAL CODE ELEchooE sverM 5239M iNE: ART 250 PAW Hi 20. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire. electric shock or other hazards. 21 Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22. When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury Read the owner's manual of the other equipment carefully and follow the instructions when making any connections 23. Sudden high volume sound may cause hearing or speaker damage When you use headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high volume sound, it may cause hearing damage. CDNDENSATION: Moisture Will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens. unit's performance Will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit. Ill HOW TO HANDLE THE LCD PANEL: r Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur ” if the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation If the liquid gets in your mouth. immediately gargle and consult with your doctor. Also. if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water. Possible Adverse Effects on LCD Panel: if a fixed (nonrmoving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the followmg formats or images: ” Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites. ’ Special Formats that do not use the entire screen For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen). The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsib ty for these symptoms. C LCD Panels are manufactured using an extremely high level of precision technology. however sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a sign ofa malfunction. ' Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference. " Effect on infrared devices , There may be interference while using infrared devices such as infrared cordless headphones Declaration of Conformity This device complies with part 15 of the FCC Rules Operation is subject to the followmg two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IV End of life directives Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic industries Alliance at www eia.org to find a recycler in your area. Non-active pixels The LCD panel contains almost 3 million thin film transistors. which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed black (in the case of a dead pixel), blue, green, or red point These nonractive pixels do not adversely affect the performance of your TV, and are riot considered defects Power source TO USEAC POWER 1. The power cord is attached to the TV at the factory. 2. Connect the AC cord into an AC outlet. 0 WARNING Do not connect this unit to the power using any device other than the supplied AC cord. This could cause fire. electrical shock, or damage Do not use with a voltage other than the power voltage specified This could cause fire, electrical shock, or damage 0) CAUTION When this unit is not used for a long time. (e.g.. away on a trip) in the interest of safely. be sure to unplug it from the AC outlet. Do not plug/unplug the AC cord when your hands are wet. This may cause electrical shock. Accessories List.... Installing the Stand .. Installing a Wall-mount Bracket ........................................ When Installing the TV Against a Wall or Enclosed Area . Viewing the Control Panel ................................................ Viewing the Remote Control .................. Installing Batteries in the Remote Control Making Connections ........................................................................................ 8 Turning your TV on or off... Selecting the Input Source Changing Channels / Volume Shortcuts Instructions ............ Turning your TV for the First Time To Use the Menu .. Using the TV Menu.. Using the Video Menu Using the Audio Menu Using the Setup Menu.... Using the Parental Menu Trouble Shooting ............................................................................................ 18 General ........................................................................................................... 20 ..3 ..4 Gett'ng Started Accessories List um MANUAL ED ?????? °? ???? “until Installing the Stand 1. The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack. 2. For tabletop use, the TV must be attached to the provided stand as shown on this page. Be sure to disconnect the AC power cord before installing a stand or wall-mount brackets. Use a covered table or bench to lay the TV on and handle the TV carefully to prevent damage to the TV screen or cabinet during assembly. Follow the illustrations below to complete the installation steps: 0 Insert the stand column into the base plate, aligning the ridge on 0 Secure the stand column to the stand cover vertically with the the column with the groove in the base plate. two ScrewsA(M4x12). 0 Making sure the FRONT oi stand oolurnn match the FRONT of 0 Secure the stand coiumn to the stand cover horizontally with the base plate, two Screws B (ST4X14). 0 Secure the stand column to the base plate with the four Screws A(M4x12).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2012:01:13 16:04:27+08:00 Modify Date : 2012:01:13 16:04:27+08:00 Metadata Date : 2012:01:13 16:04:16+08:00 Creator Tool : PScript5.dll Version 5.2 Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 7034 bytes, use -b option to extract), (Binary data 6602 bytes, use -b option to extract) Document ID : uuid:63111F30BD3DE1118EA3D30E581E0D8C Instance ID : uuid:5e745ee0-6523-4eda-985a-d7bfdcef69be Derived From Instance ID : uuid:05d23648-97ad-4254-9b9e-97127878f93d Derived From Document ID : xmp.did:AC5F7462BD3CE111B156E7539F635E54 Derived From Rendition Class : proof:pdf Doc Change Count : 14823 Format : application/postscript Title : .. -User Manual.pdf Creator : alan Page Count : 8 Author : alanEXIF Metadata provided by EXIF.tools