Hisense Electric LCDF0001 LCD TV. User Manual IES091015

Download:
Mirror Download [FCC.gov]
Document ID	1208451
Application ID	LLcghM1aPSCUbcwPbNajRg==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	334.62kB (4182751 bits)
Date Submitted	2009-12-03 00:00:00
Date Available	2009-12-04 00:00:00
Creation Date	2009-12-03 18:08:56
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2009-12-03 18:09:12
Document Title	IES091015 Ó¢·¨Î÷.cdr
Document Creator	CorelDRAW Version 9.397
Document Author:	΢ÈíÓû§

Setting Up
—
) Connect to other devices D
5. Connect to PC
- Connect the D- Sub cable to “VGA" on the rear of your set and the other end to the
Video Card of your computer.
- Connect the stereo audio cable to “PC AUDIO " on the rear of your set and the other
end to “Audio Out" of the sound card on your computer.
Note: For some sets "PC AUDIO" share with component.
(93 =qu=qcp=
/:
QM
t,
VGA AUDIO IN
Computer
6. Connect to headphone
- Connect the headphone jack of the TV set.
The volume of the headphone is automatically adjusted with the main volume of the
TV set.
C: M Headphone
14
Using the remote Control
—
) Installing batteries E1
Installing the remote control batteries
1. Open the battery cover on the back of the remote control.
2. Install two AAA StZe(‘|.5V) batteries. Match the “+" and “-" stgns on the batteries to
the signs on the battery compartment.
3. Close the battery cover.
Note:
1. Dispose of your batteries in a destgnated disposal area. Do not throw the batteries into fire.
2. Do not mix battery types or combine used batteries with new ones.
3. Remove depleted batteries tmmediately to prevent battery acid from leaking mto the battery compartment.
. If you do not intend to use the remote control for a long time. remove the batteries.
. The effective range of remote control is suggested betow.
Remote control range
1. The remote control distance: 8 meters(26.2 feet) in front of the TV set.
2. The remote control angte: taking the television mfrared Itght receiverwindow as an apex, 6 meters
(19.7 feet) away, its controtled angle (left to right) is within 30 degrees, while the vertical angle (up to
down)is within 30 degrees.
Remote control sensor
15
Using the Remote Control
—
) Learning about the remote control panel [I
Remote Control Panel Buttons instructions
(1) Power 0n/0ff.
(2) Power indicator.
(3) INPUT: Switch among TV. Video. S-Video. Component. HDMI and
VGA.
(4) 0-9 Numbers: For direct channel access.
(5) Last: Return to previous channel.
(6) — : Select digital channels.
(7) PICTURE: Picture Mode selecting.
(8) SOUND: Sound Mode selecting.
(9) DISPLAY: Display current status information.
(10) MUTE: Mute the sound.
(11)VOL/\ N: Volume increase/Volume decrease.
(12) CHA N: Next channel/Previous channel.
(13) MENU: Display the main menu/Back menu display.
(14) EXIT: On screen display (OSD) menu exit.
(15) ENTER: Enter or confirm the operation/return to the previous menu.
A/Vl Using the Channel Menu Cl
—1'_ 1 Press [MENU] button to display the main menu.
2 Press [A/V] button to select TV item.
3 Press [ b/OK] button to enter TV menu.
4 Press [AIV] button to select the option,
press [b/OK] button to enter or press [] button
to adjust the option.
5 Press the [Menu] button to close the menu.
‘ ‘ Tuner Mode Antenna
l '.' l Channel Scan b
Channel Skip P
MTS Stereo
Audio Language English
MFNU Bani.
You can adjust:
- Tuner Mode - Select the TV signal source. You can select Antenna or Cable.
- Channel Scan - Scans for channels that have signals and stores the channels information in memory.
- Channel Skip — Deletes a channel stored in memory. When you press CHI\ or CHV, your TV skips the
channel you deleted. You can still tune to the channel using the number buttons on the remote control.
- MTS - Selects the sound mode. You can select Mono, Stereo, or SAP(Second Audio Program)
- Audio Language - Selects the audio language for a program,
19
Changing the TV Settings
) Using the Video Menu D
__ Press [MENU] button to display the main menu.
Home ModE Press [A/V] button to select Video item.
Brrghtness 7 Press [ b/OK] button to enter Video menu.
Contrast 7 7" Press [A/V] button to select the option.
Saturation E1 . press [b/OK] button to enter or press [] button to
Shaw‘s“ ; adjust the option.
CNN-rameramre Standard Press the [Menu] button to close the menu.
Advanced Vldeo
1 Adjust
You can adjust:
- Picture Mode — Adjusts the Picture Mode. You can select Standard, Cinema, User or Vivid.
- Bnghtness - You can lncrease or decrease the brightness of the picture. Increaslng the brightness can
add more llght to dark areas of the picture, while decreasing the brightness can add more darkness to
light areas of the picture.
~ Contrast - You can increase or decrease the contrast of the picture. Increase the contrast to adjust the
white areas of the picture or decrease the contrast to adjust the black areas of the plcture.
~ Saturation - Adjusts the intensity of the colors.
- Sharpness - You can increase the sharpness level for clearer images or decrease the sharpness level
for smoother images.
- Colortemperature - Changes the color temperature. You can select the color temperature from three
options: Cool. Standard or Warm.
- Advanced Video - Accesses advanced vrdeo settings such as DNR, Adaptive Luma Control, Flesh
Tone and MFC.
__ QDNR: It can optimize the picture srgnal from trme and
space; reduce the outside noise interference and
DNR Low . . . .
return the pure |n|t|al s|gnal. It has four ratlngs: Low,
Adapllve Luma Control Off
Standard, Strong and Off.
Flesh Tone orr
MFG ’ OAdaptive Luma Control: According to the content of
picture, it can adjust brightness automatically.
<>Flesh Tone' When this feature is “on" state, the TV
could be the basls of lmage content. for color correction.
MENU BSK‘
To improve the perception of moving lmages. The weak setting is sultable for most programs
and is recommended for general viewrng. normal and strong settings can further enhance
motion, however on some cases can create a halo effect on edges of moving objects. You may
need to switch settings pending the contents your viewrng.
20
Changing the TV Settings
—
> Using the Audio Menu Cl
1 Press [MENU] button to display the main menu.
Balance Ewi. 2 Press [A/V] button to select Audio item.
Surround Sound on 3 Press [ DIOK] button to enter Audio menu.
Equalizer 4 Press [A/V] button to select the option.
SPDlF Type PCM press [b/OK] button to enter or press [] button to
Auto Volume Control Standard adjust the option.
5 Press the [Menu] button to close the menu.
mutt WENU Sam
The options are:
- Balance - Adjusts the volume of the left and right speakers.
' Surround Sound — Turns the surround sound effect on or off.
- Equalizer - Weaken or enlarge the sound of the main frequency points.
- SPDIF Type - Selects the SPDIF type. You can select PCM. Dolby Digital or Off.
- Auto Volume Control - Turns automatic volume control on or off. The option keeps the audio in a
preset range to eliminate large spikes in volume.
Note: Via SPDIF Type, you can choose the optical digital audio out type. If Audio Volume Control is On,
that means audio out control is activated.
21
Changing the TV Settings
> Using the Setup Menu El
‘Hi | _ Press [MENU] button to display the main menu.
OSD Language English Press [AIV] button to select Setup item.
Screen Mode Wide Press [ b/OK] button to enter Setup menu.
A DPMS On Press [A/V] button to select the option
‘ 1 5!“ sues" 0" press [b/OK] button to enter or press [] button to
T|me Setup . .
adjust the option.
Caption b
Reset Default > Press the [Menu] button to close the menu.
Select ENTER Enter EXlT Exit
- OSD Language - Use the right or left arrow button to choose the OSD Language among English, Spanish
and French.
- Screen Mode - Use the arrow button to choose the screen aspect ration from Wide, Normal, Zoom,
Cinema, Dot-to-Dot or Auto.
- DPMS - This is a good function for a computer monitor. When DPMS is on, the computer will control the
screen on or off. For example, if the computer is in sleep mode, the screen will be switched off. If the
computer is activated, the screen also is activated.
- Blue Screen: Turns on or off display of a blue screen as the image when there is no video signal.
- Time Setup - You can set up the exact time by yourself. You can also set up Sleeper Time and Auto
Sleep Time.
- Caption: There are three items in it - Analog Closed Caption, Digital Closed Caption and Digital Caption
Style.
Analog Closed Caption: 001, 002, CC3, CC4, TEXT1,TEXT2, TEXT3, TEXT4.
Digital Closed Caption: Service1, Service2, Service3, Service4, Service5, Services.
Digital Caption Style: There are two Caption Styles. One is the automatic function set as the
broadcaster, while the other is the custom style where you can adjust the font size, color, opacity,
background color etc., accordingly.
- Reset Default - Every TV has its original setting before leaving the factory. So this function helps you
restore these settings.
22
Changing the TV Settings
—
) Using the Parental Menu D
Press [MENU] button to display the main menu.
Press [A/V] button to select Parental item.
Change Password
Channel Bjnck Press [b/OK] button to enter Parental menu.
lnput Block Press [A/V] button to select the option,
Pmflfam Blink press [b/OK] button to enter or press [] button to
adjust the optlon.
Press the [Menu] button to close the menu.
I'lel“ rum
When you first use this functlon, the default password is [0000].
Once you mput this password. you can: Press A/V to hlghlight an option, then press 4/ b to adjust the
optlon. You can adjust:
- Change Password — The flrst time you use this function, use the default password. If you want to change
it, first enter the new password then enter the same password again.
- Channel Block - ThlS function will let you block any channel you want.
- Input Block - You can block the input source with this function. For example, if you want to block AV input,
just highlight [AV] and press [ENTER].The AV lnput will not be seen in the screen.
- Clean All - This functlon will let you clean all the channels stored on this TV.
Note: If you choose this functlon, all the programs you preset will be lost.
- Program Block-A. Rating Enable is on
B. U.S. TV Ratings: You can choose TV ratings according to the illustratlon on the screen.
C. The settings for U.S. Movie Ratings, Canada (English) Ratlngs and Canada (French)
Ratlngs follow Step B.
If you want to block the unrated program, please turn on thls function.
Following is the description of these ratings.
Violence
23
Changing the TV Settings
—
) Using the Parental Menu El
Defined as
General audience
Parental Guidance suggested
Parents strongly cautioned
No one 17 and under admitted
Adultaudience only
AboutCanada(French)
Rating Description
General
8+General; Not recommended for young children
Programming may not be suitable for children under
the age of 13
Programming ls not be suitable for children under
the age of 16
16 ans+
18 ans+ Programmlng restrlcted to adults
About Canada (English)
Description
Children eight years and older
General Programmlng, suitable for all audlences
Parents Guidance
Viewers 14 years and older
Adult programming
NOTE: As you block rating, all rating higher than the ones you select are blocked as well. For
example, if you choose to block the MPAA rating R, the higher ratings, NC—17 and X, are
automatlcally blocked too .
24
Appendix
) Trouble shoo
Before calling a service technician, please check the following table for a possible cause of the problem and some
solutions.
Customer important notice:
If the TV can not be operated, please unplug the power and restart .
Symptoms
Possible Solutions
TV will not turn on
Make sure the power cord iS plugged in, then press Power (Standby).
The remote control batteries may be dead. Replace the batteries.
Unplug the VGA wire and plug the power wire again.
No picture, no sound
Check |f you have set the timer off.
Check the antenna/cable connections.
Press [Display] to see if you have selected the right signal source.
No sound, picture OK
The sound may be muted. Press [VOL+ ] on the remote control.
The station may have broadcast difficulties. Try another channel.
Check the speakers cable connect|ons.
Poor sound, picture 0K
The station may have broadcast difficulties. Try another channel
Check the speakers cable connections.
Poor picture, sound OK
Checkthe antenna connections.
The station may have broadcast difficulties. Try another channel.
Adjust the p|cture from the menu.
Unable to select a certain
channel
The channel may be skipped. Choose this channel by directly selecting
the buttons from the remote control.
Poor colour or no colour
The station may have broadcast difficulties. Try another channel.
Adjust Saturation in the Video settings menu.
The remote control does
not operate
There may be an obstruction between the remote control and the
remote control sensor.
The batteries may be installed with a wrong polarity.
The remote control batteries may be dead. Replace the batteries.
Disorder display at power on
This may be caused because of a very short interval between POWER
OFF and ON.
Unplug the power and restart.
25
Appendix
) Spelelcatlo
Model
42LCSSSZ4OVB7 47L0555240VB7 55L0555240V69
Screen Dragonal Size
42 lnches 47 inches 55 lnches
Screen Resolutlon
1920x1080 Pixels
1920x1030 Plxels 1920x1030 Plxels
Power Consumptrpn
205W 250W 350W
Wall—mount screws pattern
M5X12mm (4 pcs)
M6X12mm (4 pcs) M8X|2mm (4 pcs)
Wall-mount ulmenslonNESA)
400mm X 200mm 400mm X 400mm 400mm X 400mm
Slze with base(inch)(L x wx H)
A0 2"X11 9"x27 2" 44.7"X13.3"X30" 52.7"X16.1"X35.1"
Wergnt with baseUbs)
48 5 lbs
59.5 lbs 99 lbs
Power Supply
AC BOHZ 120V
Television eyslem
Amerlcan TV standard NTSC / ATSC system
Audio multiplex
BTSC system
VHF 243 UHF: 14459 CATV 1425
Channel coverage
Dlgltal Terrestnal Broadcast (eves) 2—69
Dlgltal Cable(G4/256 QAM) 1~135
Sound Output Power (RMS)
10W+10W
Component (V/F’b/Pr) mode
480I160Hl, 4BOP/SDHZ. 720P160Hl, 1080I/60Hz
PC (VGA) mode
640XABOIEOHZ, BDOX500/60H1.1024X7GB/GDH1
4BOIIGOHZ, 4BDP/60Hz‘ 7ZDPIGOHZ, 1080I/60Hz, 1080PIGOHZ
HDMI made
640x48OIEOHZ. 800x500/60H2.1024006815on
Temperature 5'c~35‘c (41F-95F)
Environmental Condiilons
Humidr‘y : 20%-80%RH
Almosphen'c pressure: 86kPe-106kPe
Supplied accesscrles
Remote central, Batteries, User Manual. Quick start Guide,
Remote Central Guide. AC Cable, cniluren Sarely Guide, Warranty Card.
Registration Card
Note: Design and specifications are subject to change without notice.
CUSTOMER NOTICE: Use carefully when operating to prevent damage to the screen.
26

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2009:12:03 18:09:12+08:00
Create Date                     : 2009:12:03 18:08:56+08:00
Metadata Date                   : 2009:12:03 18:09:12+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Title                           : IES091015 Ó¢·¨Î÷.cdr
Creator                         : ΢ÈíÓû§
Document ID                     : uuid:140c2687-e9a3-4c63-95c3-979407dcbc34
Instance ID                     : uuid:ce86f889-092d-42b9-9e03-b5c07b97bf39
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Page Count                      : 14
Author                          : ΢ÈíÓû§

EXIF Metadata provided by EXIF.tools