Hisense Electric LCDF0014 Part15 Subpart B-LCD Monitor User Manual

Hisense Electric Co., Ltd. Part15 Subpart B-LCD Monitor

W9HLCDF0014_User Manual

Español
MANUAL DEL USUARIO
Antes de utilizar el televisor, por favor lea este manual
detenidamente y consérvelo para futuras referencias.
50K610GW
55K610GW
ES-G124911
⠽᭭ো˖
ᴵᔶⷕᅮԡḚ[PP
50K610GW
55K610GW
ES-G124911
I
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
SURGXFWVHQFORVXUHWKDWPD\EHRIVXI¿FLHQWPDJQLWXGH
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
FCC Statement
NOTE:
This equipment has been tested and found to comply with
the limits for a class B digital Device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio Communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
FCC ID Number WiFi Module: WWMMN421V1
The WiFi Module complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This device
should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
WARNING
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to
this equipment. Such modifications could void the user's
authority.
Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other
countries. All other trademarks are property of their respective owners. 2011 Hisense USA, Corporation. All Rights Reserved.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
6SHFL¿FDWLRQVVXEMHFWWRFKDQJHZLWKRXWQRWLFH
7KLV79LQFRUSRUDWHV+LJK'H¿QLWLRQ0XOWLPHGLD,QWHUIDFH+'0,TM) technology.
+'0,WKH+'0,ORJRDQG+LJK'H¿QLWLRQ0XOWLPHGLD,QWHUIDFHDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI+'0,/LFHQVLQJ//&
Energy Star
Your Hisense TV is ENERGY
STAR ® qualified in the “Energy
Saving” mode. It meets strict energy
efficiency guidelines set by the U.S.
Environmental Protection Agency
and Department of Energy. ENERGY
STAR is a joint program of these
government agencies, designed to
promote energy efficient products and practices. Changes to
certain features, settings, and functionalities of this TV (i.e.
TV Guide, Picture, Sound) can increase or change the power
consumption. Depending upon such changed settings, the
power consumption may exceed the limits required for the
ENERGY STAR qualification in the “Energy Saving” mode.
NOTE
Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable.
II
III
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
15. Apparatus should not be exposed to dripping or
splashing, and objects filled with liquids, such as vases,
should not be placed on the apparatus.
16. An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching
such power lines or circuits, as contact with them might
be fatal.
17. Do not overload wall outlets and extension cords, as this
can result in a risk of fire or electric shock.
18. Do not push objects through any openings in this unit,
as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill
or spray any type of liquid into the unit.
19. If an outside antenna or cable system is connected to the
unit, be sure the antenna or cable system is grounded to
provide some protection against voltage surges and built-
up static charges, Section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with respect
to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
20. When replacement parts are required, be sure the service
technician uses replacement parts specified by the
manufacturer or those that have the same characteristics
as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
21. Upon completion of any service or repairs to this unit,
ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
22. When you connect the product to other equipment, turn
off the power and unplug all of the equipment from the
wall outlet. Failure to do so may cause an electric shock
and serious personal injury. Read the owner's manual of
the other equipment carefully and follow the instructions
when making any connections.
23. Sudden high volume sound may cause hearing or
speaker damage. When you use headphones, (if the unit
is equipped with a headphone jack) keep the volume at a
moderate level. If you use headphones continuously with
high volume sound, it may cause hearing damage.
CONDENSATION:
Moisture will form in the operating section of the unit if the
unit is brought from cool surroundings into a warm room or
if the temperature of the room rises suddenly. When this
happens, unit's performance will be impaired. To prevent
this, let the unit stand in its new surroundings for about an
hour before switching it on, or make sure that the room
temperature rises gradually.
Condensation may also form during the summer if the unit is
exposed to the breeze from an air conditioner. In such cases,
change the location of the unit.
IV
Important Safety Instructions
HOW TO HANDLE THE LCD PANEL:
Do not press hard or jolt the LCD panel. It may cause the
LCD panel glass to break and injury may occur.
If the LCD panel is broken, make absolutely sure that you
do not touch the liquid in the panel. This may cause skin
inflammation.
If the liquid gets in your mouth, immediately gargle and
consult with your doctor. Also, if the liquid gets in your eyes
or touches your skin, consult with your doctor after rinsing
for at least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel:
If a fixed (non-moving) pattern remains on the LCD Panel
for long periods of time, the image can become permanently
engrained in the LCD Panel and cause subtle but permanent
ghost images. This type of damage is NOT COVERED BY
YOUR WARRANTY. Never leave your LCD Panel on for long
periods of time while it is displaying the following formats or
images:
Fixed Images, such as stock tickers, video game patterns,
TV station logos, and websites.
Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a normal
(4:3) display (black bars at top and bottom of screen); or
viewing normal style (4:3) media on a widescreen (16:9)
display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction
but technical limitation. Therefore we disclaim any
responsibility for these symptoms.
LCD Panels are manufactured using an extremely high
level of precision technology, however sometimes parts
of the screen may be missing picture elements or have
luminous spots.
This is not a sign of a malfunction.
Do not install the LCD Panel near electronic equipment that
produces electromagnetic waves. Some equipment placed
too near this unit may cause interference.
Effect on infrared devices - There may be interference
while using infrared devices such as infrared cordless
headphones.
Declaration of Conformity
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and (2)
This device must accept any interference received, including
interference that may cause undesired operation.
Your TV also contains material that can be recycled and
reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at
www.eia.org to find a recycler in your area.
TO USE AC POWER
1. The power cord is attached to the TV at the factory.
2. Connect the AC cord into an AC outlet.
End of life directives
Power source
WARNING
Do not connect this unit to the power using any device
other than the supplied AC cord. This could cause fire,
electrical shock, or damage.
Do not use with a voltage other than the power voltage
specified. This could cause fire, electrical shock, or
damage.
CAUTION
When this unit is not used for a long time, (e.g., away on
a trip) in the interest of safety, be sure to unplug it from
the AC outlet.
Do not plug/unplug the AC cord when your hands are
wet. This may cause electrical shock.
The LCD panel contains almost 3 million thin film transistors,
which provide exceptionally sharp video quality. Occasionally,
a few non-active pixels may appear on the screen as a
fixed black (in the case of a dead pixel), blue, green, or red
point. These non-active pixels do not adversely affect the
performance of your TV, and are not considered defects.
Non-active pixels
1
Contents
Getting Started
Accessories List...............................................................................................3
Installing the Stand..........................................................................................3
Installing a Wall-Mount Bracket .......................................................................4
When Installing the TV Against a Wall or Enclosed Area ................................5
Viewing the Control Panel ............................................................................... 6
Viewing the Remote Control............................................................................ 7
Installing Batteries in the Remote Control ....................................................... 8
Making Connections........................................................................................9
Basic Features
Turning the TV on or off..................................................................................13
Turning the TV On for the First Time ..............................................................13
Selecting the Input Source .............................................................................13
Changing Channels / Volume.........................................................................14
Shortcuts Instructions.....................................................................................14
To Use the Menu ............................................................................................15
Using the Picture Menu ..................................................................................15
Using the Audio Menu ....................................................................................15
Using the Screen Menu..................................................................................16
Using the Channels Menu .............................................................................. 16
Using the Settings Menu ................................................................................17
Using the Lock Menu......................................................................................18
2
Contents
Illustrations are for your reference only!
Advanced Features
Network Connection .......................................................................................20
DLNA Settings ................................................................................................23
Media Share Settings in Computer.................................................................24
Network Function............................................................................................25
Enter the Network Applications.......................................................................26
VUDU HD Movies........................................................................................... 26
VUDU Apps ....................................................................................................28
Netflix..............................................................................................................28
YouTube .........................................................................................................29
Pandora..........................................................................................................29
Picasa.............................................................................................................29
AccuWeather ..................................................................................................30
Vimeo .............................................................................................................30
Network Apps Service Information .................................................................30
Digital Media Player........................................................................................31
Enjoy Video Files............................................................................................31
Enjoy Music Files............................................................................................32
Browse the Picture .........................................................................................32
Browse the Text Files .....................................................................................33
Digital Media Receiver................................................................................33
Other Information
Trouble Shooting ............................................................................................ 34
General...........................................................................................................36
3
Getting Started
Accessories List
Installing the Stand
USER MANUAL Quick Setup Guide
User Manual Quick Setup Guide Warranty Card Remote Control Battery × 2 Spacer×4
NOTES
1. The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or
sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure
on the front of the TV at any time because the screen could crack.
2. For tabletop use, the TV must be attached to the provided stand as shown on this page.
3. To Wall-Mount, brackets (not provided) must be attached to the TV as shown on next page.
Follow the illustrations below to complete the installation steps:
1. Secure the stand column to the base plate with the 4 screws (M4×12mm for 50" and M5×12mm for 55") provided. See
Figure 1.
2. Secure the stand cover to the stand column vertically with the 2 screws (M4×12mm for 50" and M5×12mm for 55") provided.
See Figure 2.
3. Secure the stand cover to the stand column horizontally with the 2 screws (ST4×14mm) provided. See Figure 3.
WARNING
Be sure to disconnect the AC power cord before installing a stand or Wall-Mount brackets.
CAUTION
Use a covered table or bench to lay the TV on and handle the TV carefully to prevent damage to the TV screen or cabinet
during assembly.
231
4 screws
(M4×12mm for 50" and
M5×12mm for 55")
screws
(M4×12mm for 50" and M5×12mm for 55")
Screw
(ST4×14mm)
for 50K610GW(50") (M4×12mm)×6 (ST4×14mm)×2 (M5×12mm)×4 (M6×45mm)×4
for 55K610GW(55") (M5×12mm)×10 (ST4×14mm)×2 (M6×45mm)×4
Warranty Card
Screws:
4
Getting Started
Installing a Wall-Mount Bracket
4. Carefully place your TV on a soft, cushioned, surface to
prevent damage to the screen.
Secure the stand to the TV with the 4 screws (M5×12mm)
provided. See Figure 4.
4
Screw (M5×12mm)
If you want to attach the TV to a Wall-Mount bracket (not provided), you should first remove the stand if it is pre-attached (see
Step 1).
1. Make sure the TV is laid face-down on a clean, safe,
and cushioned space, remove the original screws in the
bracket holes on the TV back over.
3. Follow instructions provided with the Wall-Mount bracket.
If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect
assembly.
The selected screws are 9.5 ~ 11.5 mm in length when measured from the attaching surface of the TV's rear cover. The
diameter and length of the screws differ depending on the Wall-Mount Bracket model.
2. Place the provided spacers in the corresponding bracket
holes. Attach purchased bracket (1.5~2.5 mm thickness)
on the TV with 4 screws provided. Follow instructions
provided with the wall bracket.
1
WARNING
Use only the 4 screws (M6 x 45mm) provided with the TV to prevent internal damage to the TV set or cause it to fall.
Wall-Mount Bracket
9.5 ~ 11.5 mm
Screw
Spacerthe TV's rear cover
Wall-Mount hole pattern VESA (mm) 400 × 400
Wall-Mount screw size (mm) M6
Screw
(M6x45mm)
2
Spacer × 4
Bracket
(1.5~2.5mm)
5
Getting Started
When Installing the TV Against a Wall or Enclosed Area
Install with stand
Never install the TV set as follows:
Install on the wall
Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the
TV at temperatures below Inadequate air 41°F (5°C).
Leave at least this much
space around the set.
Leave at least this much
space around the set.
4 inches
(10cm)
4 inches
(10cm) 4 inches
(10cm)
4 inches
(10cm)
4 inches
(10cm)
23»8 inches
(6cm)
12 inches
(30cm) 12 inches
(30cm)
Wall Wall
Air circulation is blocked.
Inadequate air circulation can lead to overheating of the TV and
PD\FDXVHGDPDJHWR\RXU79RUFDXVHD¿UH
6
Getting Started
Viewing the Control Panel
Remote sensor Power indicator
Item Description
Power indicator Light up when the power is on.
Remote sensor Receives remote signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
MENU Display an on-screen menu to setup your TV’s features.
INPUT Select among the different input signal sources.
VOL + / VOL - Adjust the volume.
&+ȁ&+9 Select the channel.
Power button
Turn on the TV or put the TV in standby mode.
Caution: The TV continues to receive power even in standby mode.
Unplug the power cord to disconnect power.
NOTES
FOR ILLUSTRATION ONLY.
Powering up or down the TV requires several seconds of processing time. Do not rapidly turn the TV on/off as
abnormal operation may occur.
MENU
INPUT
VOL +
VOL -
&+ȁ
CH V
7
EN-33922A
Viewing the Remote Control
Getting Started
NOTES
FOR ILLUSTRATION ONLY.
[RED/GREEN/YELLOW/BLUE] buttons are used for Electronic Program Guide (EPG).
After pressing the [GUIDE] button when viewing digital channels, the same color buttons will appear with explanations in the
on-screen display (OSD). Follow the steps shown in the OSD.
Power on/off
Decrease volume
Media content control function buttons
Return to the previous menu
Enter the VUDU HD Movie
/DXQFK1HWÀL[$SS
Increase volume
Adjust Closed Caption (CCD) mode
Audio select button
MENU button
Dash button
Select a digital sub-channel
Ÿ
Ÿ
/
Ÿ
/
Ÿ
Navigate Up / Down / Left / Right
or adjust OSD settings
Set the sleep timer
Select picture mode
Select sound mode Display the information banner
&RQ¿UPVHOHFWLRQV
MUTE button
ASPECT button
Close the menu
Next channel
Display the favorite channel list
Go to the previous channel
Enter TV source
Previous channel
Hi-DMP (digital multimedia player) button
Open the Hi-Smart Hub
Select input source
Remote sensor
Open the DTV program guide
(if available)
Select Component / VGA / HDMI source
Special function buttons
Direct channel selection
8
Installing Batteries in the Remote Control
Getting Started
1. Press the release button on the back of the remote control to remove the battery compartment cover.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in
the battery compartment.
3. Replace the battery compartment cover.
NOTES
1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire.
2. Do not mix battery types or combine used batteries with new ones.
3. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
4. If you do not intend to use the remote control for a long time, remove the batteries.
5. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.
6. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your
skin, wash immediately.
7. Do not mix old and new batteries.
8. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television!
If you would like to program your other household remote controls to your new Hisense television, please consult the User’s
Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’ User’s Manuals should include instructions
on how to program their remote to your television.
Below is a list of Hisense codes for the most common Cable and Satellite providers. Use the Hisense code that is associated
with your Cable or Satellite provider(if applicable).
DIRECTV................................................... 0178 or 10019
Time Warner Cable........................................386 or 0178
Comcast ....................................................0178 or 10178
Cox Communications ............................................... 0178
Dish Network ...................................................627 or 505
AT&T U-verse ........................................................... 1346
If the Hisense code associated with your Cable or Satellite provider is not listed above, if the code above does not work, or if
you cannot locate the instructions for programming your household remote to your television, call your local Cable or Satellite
provider’s customer service center.
If your Cable or Satellite provider does not have an Hisense code available, please visit http://www.hisense-usa.com for
additional codes.
Change the batteries
1Remove the battery compartment cover 2Insert the batteries
9
Making Connections
Getting Started
NOTE
Some external devices impossible insert to this set for individual difference. Please replace with
appropriate external signal cable or increase the adapter to match with the port in such case.
Power input
USB2
DC5V 0.5A(MAX)
USB1
LAN
VGA
PC
PC/DVI
AUDIO IN
HDMI4 HDMI3(ARC)
HDMI2 HDMI1 DIGITAL
AUDIO OUT
ANT/CABLE
IN
/AUDIO
OUT
Y PBPRVIDEO
AV IN
COMP
L R
LAN USB USB VGA HDMI HDMIPC/DVI
AUDIO IN
AV
HEADPHONE
/AUDIO OUT
ANT/CABLE
COMPONENT
HDMI
HDMI
DIGITAL
AUDIO OUT
Item Description
ANT/CABLE Connect an antenna or cable TV to this jack.
HDMI
HDMI (High-Definition Multimedia Interface)provides an uncompressed,
all digital audio/video interface between this TV and any HDMI-device,
such as a set-top box, Blu-ray disc player, or A/V receiver.
COMPONENT Connect to a DVD player, Digital Set-Top-Box, or other A/V devices with
component (YPBPR) video and audio output jacks.
VIDEO/AUDIO(L,R) Connect to the composite video and audio (L/R) output jacks on external
video devices.
VGA
PC/DVI AUDIO IN Connect to a PC or other devices with a VGA interface.
/AUDIO OUT Connect headphone or analog sound system using RCA Y-cable
(1/8”-stereo mini to L/R phono-not provided).
DIGITAL AUDIO OUT Connect an optical cable from an external digital audio system.
USB Port for Digital Media Player.
LAN Connect an ethernet cable to access a network or the Internet.
10
Getting Started
NOTES
Check the jacks for position and type before making any connections. Loose connections can result in image or color
problems. Make sure that all connections are tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to the user’s manual of your A/V device for compatibility
and connections procedure.
Always unplug the power cord when connecting external equipment.
Connecting an antenna, cable or cable/satellite box
Connecting an A/V Device with Composite Cable
or ANT OUT
Cable
VHF/UHF Antenna
EXTERNAL DEVICESTV JACK
1. Turn off the TV before connecting the antenna.
2. Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna, cable or cable/satellite box. If you are
using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your
TV. Likewise, if you are using several antennas, you may need a combiner (not provided).
3. Connect the other end of the cable to the ANT/CABLE IN jack on the side of your TV.
1. Use the audio and video cables to connect the external A/V device’s composite video/audio jacks to the TV’s jacks. (Video =
yellow, Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
Equipment with A/V jacks
DVD Player/Recorder
Video
Camera
EXTERNAL DEVICES
Set-top box
Satellite Receiver
Satellite
antenna
cable
VCR
A/V OUT
Video
L
R
White(L)
White(L)
Yellow(Video)
Yellow(Video)
Red(R)
Red(R)
TV JACK
VIDEO
AV IN
L R
ANT/CABLE
IN
11
Getting Started
Connecting an A/V Device with Component (YPBPR) Cable
1. Use a component cable to connect the external A/V device’s component output jacks to the TV’s YPBPR jacks. Use an audio
cable to connect the external A/V device’s component audio jacks to the TV’s AUDIO (L/R) jacks.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
Y PBPR
COMP
L R
Equipment with A/V jacks
DVD Player/Recorder
Video
Camera
EXTERNAL DEVICES
Set-top box
Satellite Receiver
Satellite
antenna
cable
VCR
White(L)
White(L)
Red(R)
Red(R)
TV JACK
Component
R
L
PR
PB
Y
PR/CR
PR
PB/CB
PB
YY
Connecting an A/V Device with HDMI Cable
Support digital connections between HDMI - enabled AV devices such as PVR, DVD, Blu-Ray, AV receiver and digital
devices.
Some devices such as PVR or DVD player require HDMI signal to be set to output in the device's settings.
Please consult your device user manual for instructions.
1. Use an HDMI cable to connect the A/V device’s HDMI output jack to the TV’s HDMI jack.
2. Plug the connected devices into the mains socket before switching on the TV .
3. Select the corresponding source from the TV.
HDMI
HDMI
TV JACK
EXTERNAL DEVICES
DVD
Set-top Box
NOTE
The HDMI connector provides both video and audio signals, it’s not necessary to connect an audio cable.
Connecting a headphone
Headphones or an analog sound bar can be connected to
the /AUDIO OUT jack on your set. (While the headphone
is connected, the sound from the built-in speakers will be
disabled.)
EXTERNAL DEVICESTV JACK
/AUDIO
OUT
12
Getting Started
Connecting a PC with VGA Cable
1. Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio
output jack to TV’s PC/DVI AUDIO IN jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
NOTES
Primarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the manufacturer of the
PC Video/Graphic's card for further support. Perfect compatibility is not guaranteed.
The VGA cable will not supplied with the product.
We strongly recommend to use VGA cable with 2 ferrite cores as shown in the figure.
EXTERNAL DEVICES
Computer
TV JACK
VGA
PC
PC/DVI
AUDIO IN
Connecting an ethernet cable to access a network or the Internet
Connect an ethernet cable to access a network or the Internet. TV also features wireless connectivity. For more information,
see “Network Connection”.
Connecting an Audio Receiver with Audio cable
1. Use an audio Optical to connect the A/V device digital audio in jack to the TV's DIGITAL AUDIO OUT(Optical) jack. Or use an
RCA Y-cable (1/8”-stereo mini to L/R phono - not provided) to connect analog sound system to the TV’s /AUDIO OUT jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
NOTES
When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV
and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
When the receiver (home theater) is set to on, you can hear sound output from the TV’s digital audio out jack. When the TV
is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is connected to the
TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the
digital audio out jack from your DVD/Blu-ray player/cable box/STB satellite receiver directly to an amplifier or home theater.
TV JACKS
EXTERNAL DEVICES
Powerless
Bass Speaker
Speaker
$XGLR$PSOL¿HU
DIGITAL
AUDIO OUT
AUDIO OUT
White(L)
Red(R)
Audio Cable
(not included)
Audio Cable
(not included)
13
Basic Features
1. Make sure that you have:
Installed the remote control batteries.
Connected an antenna or cable.
Connected the power cord.
Matched the remote control with TV.
2. Press [POWER ] button to turn on your TV. The Setup
Wizard menu displays.
3. Press [Ÿ
Ÿ
] to select your menu language: English,
Spanish or French, press [ENTER] button to confirm.
4. Press [Ÿ
Ÿ
] to select your Picture Mode: Home Mode or
Retail Mode, press [ENTER] button to confirm.
If you select Retail Mode, a message appears “Please
reconfirm Retail Mode” Select “Yes” to continue, or select
“No” to change your selection.
IMPORTANT: At first, you have to match the remote
control with TV.
To turn your TV on or off (standby mode):
1. Plug the power cord into an AC power outlet.
2. Press [POWER] button, your TV turns on.
3. Press [POWER] button again to turn off your TV. When
you turn off your TV, it goes into standby mode.
The Setup Wizard menu appears the first time you turn
on the TV. It will assist you to specify the menu language,
Picture Mode, Tuner Mode and Channel Installation.
IMPORTANT: Make sure that the antenna or cable is
connected and a wired or wireless Internet connection is
available.
Turning the TV On for the First Time
Turning the TV on or off
If you selected Retail Mode, Energy Saving is not
realized.
5. Press [Ÿ
Ÿ
] to select your Tuner Mode: Antenna or
Cable, press [ENTER] button to confirm.
6. Press [Ÿ
Ÿ
] to set the Channel Installation: Search or
Skip Search, press [ENTER] button to confirm.
If you select “Search”, your TV automatically starts
Channel Installation available in your viewing area.
If you select “Skip Search”, your TV does not scan for
channels.
Depending on the reception condition, it may take up to
25 minutes or more to complete memorizing channels.
Please allow the process to complete without interruption.
WARNING
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the power
cord.
NOTE
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.
EXIT
Choose your menu Language
English
Español
Français
Select Next Exit
EXIT
Please connect cable or antenna
Preparing Channel List Status:Searching...
ATV Channels added: 0
DTV Channels added: 0
Exit
8%
The first time you turn on your TV, you
must select the TV signal source. Your
TV stores this information, so you do not
need to change the TV signal source
unless it changes. For example, you
change from an outside antenna to cable
TV.
To select the video input source:
1. Turn on your TV, then press [INPUT]
button on the remote or on the TV. The
Input Source menu opens.
2. Press [Ÿ
Ÿ
] button to highlight the
input source, then press [ENTER]
button.
Selecting the Input Source
Back Select Next Exit
EXIT
Choose your Picture Mode
Home mode
Retail mode
Home mode default settings are recommended for in-home use.
ENERGY STAR® qualified.
Retail mode is intended for in-store display and resets video
settings at Power On.
INPUT
TV
AV
Component
VGA
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Hi-DMP
EXIT
Select
Enter
Exit
ENTER
14
Basic Features
Aspect - Select the screen aspect ratio from Normal, Wide,
Zoom,Cinema, Auto and 1:1 Pixel Map..
Normal: The original 4:3 aspect
ratio (1.33:1 signal) is preserved,
so black bars are added to the left
and right of the image. Standard TV
broadcasts are displayed with a 4:3
aspect ratio.
Wide: When watching a standard
broadcast or full-frame movie in
this mode, the display image is
stretched proportionately to fill the
TV screen. When watching a 16:9
widescreen program or movie, the
display image fills the TV screen.
Zoom: Stretch the 4:3 aspect ratio
image vertically and horizontally to
fill the screen at 1:1.78 aspect ratio.
Cinema: Stretch the 4:3 aspect ratio
image vertically and horizontally to
fill the screen at 1:2.35 aspect ratio.
1:1 Pixel Map: Displays the native
signal format pixel-by-pixel without
any video processing or scaling. In
this mode, 1920 x 1080 resolution
sources fill the screen while all
other resolutions are centered and
surrounded by black bars.
Auto: Detects the incoming signal format and
automatically selects the proper aspect ratio.
Shortcuts Instructions
DISPLAY - Display the information banner. The information
including channel number, channel name, current system
time, tuner mode, audio stream, video format, audio
language, closed caption mode, parental locks rated,
program details, etc.
GUIDE - Open the DTV program guide. The program guide
information is provided by the broadcasting company.
FAV - Display your Favorite List. You can add or delete
channels to create your favorite list.
Cursor up/down: Press [Ÿ
Ÿ
] button to select the
option.
Add/Erase: Press [YELLOW] button to add or delete the
channel from Favorite List.
Page up/down: Press [RED/GREEN] button to page up
or down.
VUDU - VUDUTM is an on-demand, pay-per-view, service
that offers high-definition movies via the Web. You can
access the VUDU service by pressing this button.
Hi-Smart - Press to open the Hi-Smart Hub. The Hi-Smart
Hub provides convenient access to internet audio and video
Services in addition to social networking and media sharing
Services.
NETFLIX - Press to open the Netflix interface. Netflix is an
online DVD and Blu-ray Disc rental service, offering instant
access to movies and TV shows to Netflix members. Netflix
unlimited membership required (subscription not included).
1. Press the [CH
V
/V] (or [CH +/-]) on the TV/remote control
to change the channel.
2. Press the [VOL
V
/V] (or [VOL +/-]) on the TV/remote
control to adjust the volume.
3. Press the numeric buttons on the remote control to
display the corresponding channels.
Changing Channels / Volume
NOTE
Changing the channels can also be achieved by directly
entering the channel number using the numeric keys on
the remote control. If you are entering a two or three digit
channel number, the time between key presses should be
less than 3 seconds.
15
Basic Features
To Use the Menu
1Press the [MENU] button to open the main menu.
23UHVV>Ÿ
Ÿ
] to select a menu option, then press
[
Ÿ
/ENTER] to enter the menu.
3In each menu, you can:
3UHVV>Ÿ
Ÿ
] to select an item,
Press [
Ÿ
/
Ÿ
] to adjust the value, or
Press [
Ÿ
/ENTER] to enter the submenu,
Press [RETURN] to exit the submenu.
4Press [EXIT] button to exit the menu.
NOTE
FOR ILLUSTRATION ONLY.
Using the Picture Menu
You can adjust:
Picture Mode - Adjust the Picture Mode. You can select
Standard, Theater, Energy Saving, Game, Custom or Vivid.
Brightness - Increase or decrease the brightness of the
picture. Increasing the brightness can add more light to dark
areas of the picture, while decreasing the brightness can
add more darkness to light areas of the picture.
Contrast - Increase or decrease the contrast of the picture.
Increase the contrast to adjust the white areas of the picture
or decrease the contrast to adjust the black areas of the
picture.
Color - Adjust the level of color in the picture.
Tint - Adjust flesh tones so they appear natural.
Sharpness - You can increase the sharpness level for
clearer images or decrease the sharpness level for smoother
images.
Advanced Video - Access advanced video settings such as
Color Temperature, 120HZ Smooth Effect, Noise Reduction,
Dynamic Backlight (DCR), Adaptive Contrast and Overscan.
Color Temperature: Change the color temperature. You
can select a preset color temperature: Cool, Standard
and Warm.
120HZ Smooth Effect: Inserts frames to reduce judder
in fast action scenes. You can select On or Off.
Noise Reduction: Optimize the picture quality by filtering
signal interference. You can select Off, Low, Medium or
High.
Dynamic Backlight (DCR): Enhances the contrast ratio
between light and dark areas of the picture. You can
select Off, Low or High.
Adaptive Contrast: Automatically adjusts the contrast
level of the selected input source.
Overscan: Adjust the picture’s reproduction rate. You can
select On or Off.
Enter Select Exit
Picture
Adjust image to suit
personal preferences.
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
50
50
50
0
10
StandardStandard
Using the Audio Menu
You can adjust:
Sound Mode - Select the Sound Mode: Standard, Speech,
Custom or Music.
Balance - Adjust the volume of the left and right speakers.
Equalizer - Soften or enhance the sound at specific
frequency points.
Audio
Select Back
Standard
Off
On
PCM
Off
0
Select a Sound mode
to achieve ideal sound.
Sound Mode
Balance
Equalizer
Sound Surround
Speaker
Digital Audio Output
Auto Volume Control
Picture
Select Back
Automatically adjust
picture detail and
brightness.
Color Temperature
120Hz Smooth Effect
Noise Reduction
Dynamic Backlight (DCR)
Adaptive Contrast
Overscan
Cool
On
Medium
Off
Off
On
16
Basic Features
Sound Surround - Simulates surround sound and enhances
bass response.
Digital Audio Output - Send digital audio to an external
audio system. You can select PCM, RAW or Off.
PCM: PCM outputs two channel audio regardless of the
input format.
RAW: Passes through (output = input) the incoming audio
signal without decoding. E.g. incoming Dolby Digital, DTS
or PCM data stream is simply output as it is without any
processing.
Auto Volume Control - Automatically adjusts volume to a
consistent level; attenuates loud passages.
Audio
Adjust Select Back
10DB
0DB
-10DB
0
120Hz
0
500Hz
0
1.5KHz
0
5KHz
0
10KHz
Using the Screen Menu
You can adjust:
H.Position - Move the image right or left.
V.Position - Move the image up or down.
Phase - Adjust the focus of stable images.
Clock - Adjust the sample frequency.
Auto Adjust - Detects input signal clock, phase and position
and adjusts TV display accordingly.
NOTE
Only available in VGA mode.
Using the Channels Menu
You can adjust:
Tuner Mode - Select TV source: Antenna or Cable.
Auto Channels Search - Scans for channels that have
signals and stores the channel information in the channel
list.
Channel Skip - You can cancel a channel stored in the
channel list.
Favorite List - Add or delete channels to create a favorite
list. You can press [FAV] button to display your Favorite List.
MTS - Select the default audio stream: Mono, Stereo or
SAP.
Audio Language - Select the audio language: English,
Español or Français.
Channels
Select Back
Select tuner connect
mode.
Tuner Mode
Auto Channel Search
Channel Skip
Favorite List
MTS
Audio Language
Antenna
Stereo
English
Back
Auto Scan
Status: Scanning... Antenna
Analog Channels: 0
Digital Channels: 0
8%
NOTE
When you press [CH
V
/ V] button, your TV skips
the channel you cancelled. You can still tune to the
channel using the number buttons on the remote
control.
NOTE
Only available in TV mode.
Screen
Enter Select Back
39
30
23
127 Image positioning
and PC settings.
H.Position
V.Position
Phase
Clock
Auto Adjust
17
Basic Features
Power On Timer: When “On”, you can set the time
when the TV turns on automatically.
Timer: Set the desired time for the TV to turn on
automatically.
Power Off Timer: When “On”, you can set the time
when the TV turns off automatically.
Timer: Set the desired time for the TV to turn off
automatically.
Sleep Timer: Specify the amount of time before your TV
automatically turns off: Off -10-...-120 minutes.
Caption - Adjust Closed Captioning settings.
Caption Control: Select the Closed Caption mode: CC
Off, CC On or CC On When Mute.
Analog Closed Caption: Select an Analog Caption setting:
CC1~CC4: Closed captioning appears in a small
banner across the bottom of the screen. CC1 is usually
the “printed” version of the audio. CC2~CC4 display
content are provided by the broadcaster.
TEXT1~TEXT4: Closed captioning that covers half
or all of the screen. Text1~Text4 display content are
provided by the broadcaster.
Off: To turn off the Analog Caption.
Digital Closed Caption: Select a Digital Caption setting:
Service1~Service6 or Off.
Digital Caption Style: Customize the look of digital
Closed Captioning.
Caption Style: Set the look of Digital CC. “As
Broadcaster” uses broadcaster’s style.
Font Size/Style/Color/Opacity: Select the size/style/
color/opacity level of font.
Background Color/Opacity: Select the color/opacity
level of the background.
Window Color: Select the color of the window.
HDMI CEC - HDMI CEC lets you control HDMI CEC -
compatible devices connected to the HDMI jacks on your TV
using the remote control that came with your TV.
Settings
Select Back
Set the look of digital CC.
Automatic uses
broadcaster's style.
Caption Style
Font Size
Font Style
Font Color
Font Opacity
Background Color
Background Opacity
Window Color
Custom
Large
Style 1
White
Solid
Black
Solid
Black
Using the Settings Menu
You can adjust:
Language - You can select the menu’s language to English,
Español or Français.
Menu Settings - You can set On-screen menu system.
Timeout: Select the display time of the menu: from 10
seconds to 60 seconds.
Demo Mode: You can turn the Demo Mode On or Off.
Time Setup - Set the time zone, daylight savings, time and
sleep timer.
Time Zone: Select your local time zone: Eastern Time,
Indiana, Central Time, Mountain Time, Arizona, Pacific
Time, Alaska or Hawaii.
Daylight Saving: Set the Daylight Saving time for your
area.
Time: You can set time manually or select automatic if
the TV is connected to an antenna or cable source.
Auto Synchronization: Select “On” for automatic
date and time setting using information from broadcast
stations in your area.
Date/Time: Set the current year/month/day/time.
Settings
Select Back
Adjust OSD language.
Language
Menu Settings
Time Setup
Caption
HDMI CEC
Network
Power LED
Reset Default
English
On
Settings
Select Back
Obtain date and time
from broadcaster.
Auto Synchronization
Date
Time
Power On Timer
Timer
Power Off Time
Timer
On
2012/01/01
01:01 PM
Off
12:00 AM
Off
12:00 AM
18
Basic Features
Using the Lock Menu
When you first use this function, the default password is
[0000]. Once you input this password, you can set options.
You can adjust:
Channel Block - Block selected Channels on the TV.
Program Block - Block selected Programs on the TV.
Rating Enable: Block or unblock TV ratings.
U.S. TV Ratings: Restrict TV programs by USA Ratings.
U.S. Movie Ratings: Restrict movie by USA Ratings.
Canadian English/French Ratings: Restrict movie and
TV programs by Canadian Ratings.
Open V-Chip: Display an advanced V-Chip ratings table
for digital channels (USA only).
Block Unrated: Block unrated TV programs.
Input Block - Block selected Input source on the TV.
Change Password - If you want to change the default
password, first enter the new password then enter the same
password again.
Clean All - You can reset all locks to factory mode.
NOTES
HDMI cables must be used to connect HDMI CEC -
compatible devices to your TV.
The connected device’s HDMI CEC feature must be
turned on.
If you connect an HDMI device that is not HDMI CEC -
compatible, all the HDMI CEC Control features will not work.
Depending on the connected HDMI device, the HDMI
CEC Control feature may not work.
Playback Device 2: You can manually set your playback
device in Standby or Power On mode.
Setup: To configure the HDMI CEC function.
CEC Function: Enable HDMI CEC by selecting On.
Auto Turn Off: When HDMI CEC is enabled, this
function turns off HDMI CEC devices when you turn off
your TV.
TV Auto On: When HDMI CEC is enabled and you
turn on an HDMI CEC device, this function turns on
your TV automatically.
Device Discovery: Displays a list of HDMI CEC
devices that are connected to your TV.
Network - You can setup the network configuration in this
menu. For more information, see “Network Connection” and
“Network Setup”.
Version Info: Display the software version information.
You may need to reference this information when
contacting Customer Care or upgrading the firmware
online.
Power LED - Select this feature to turn Off or On the Power
LED indicator on the front panel on your TV.
Reset Default - Restores the TV configuration to factory
settings. You will need to complete the setup for such things
as Tuner/Channel settings, Network connection, Date/Time
and other user preferences.
Lock
Enter Select Back
Prevent access to TV
services.
Channel Block
Program Block
Input Block
Change Password
Clean All
19
Basic Features
Following is the description of these ratings.
U.S. Movie Ratings
Rating Defined as
G General audience
PG Parental Guidance suggested
PG-13 Parents strongly cautioned
R Restricted
NC-17 No one 17 and under admitted
X Adult audience only
U.S. TV Ratings
Age Defined as
TV-Y All children
TV-Y7 Directed to older children
TV-G General audience
TV-PG Parental Guidance suggested
TV-14 Parents Strongly cautioned
TV-MA Mature Audience only
Contents Defined as
AAll of the ratings below that rating set blocked
automatically
D Suggestive dialogue
L Strong language
S Sexual situations
V Violence
FV Fantasy Violence
Canadian English Ratings
Rating Description
C Children
C8+ Children 8 years and older
G General Programming, suitable for all audiences
PG Parents Guidance
14+ Viewers 14 years and older
18+ Adult Programming
Canadian French Ratings
Rating Description
G General
8 ans+ 8+General; Not recommended for young
children
13 ans+ Programming may not be suitable for children
under the age of 13
16 ans+ Programming is not be suitable for children
under the age of 16
18 ans+ Programming restricted to adults
20
Advanced Features
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) with a Ethernet or wireless
connection.
You can attach your TV to your LAN by one of the three following ways:
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5
LAN cable. See the diagram below.
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is connected
to an external modem. Use LAN cable for the connection. See the diagram below.
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port
on the back of your TV directly to a network wall outlet with a Cat 5 cable. See the diagram below. Note that the wall outlet
is attached to a modem or router elsewhere in your house.
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol
(DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so
you don’t have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet
mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get
the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
The Modem Port on the Wall
Modem Cable LAN Cable
LAN Port on TV
External Modem
(ADSL / VDSL / Cable TV)
LAN
The Modem Port on the Wall
Modem Cable LAN Cable LAN Cable
LAN Port on TV
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
The LAN Port on the Wall LAN Port on TV
LAN Cable
LAN
NOTE
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support
DHCP also let you use Static IP addresses.
Connecting to a Wired Network
21
Advanced Features
Use the Automatic Network Setup while your connecting the
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
3. On the Network screen, select Configuration and press
[ENTER] button to enter the submenu.
4. Set Internet Connection to On and Interface to Ethernet.
5. Select IP Setting and press [ENTER] button to enter it.
6. Set Address Type to Auto.
7. Auto acquires and enters the necessary connection
values automatically.
8. If the connection values are not automatically entered,
please check your modem and router manuals for
directions to enable automatic IP addressing by DHCP.
Or, follow the steps listed to the follow to manually
configure the network connection.
Use the Automatic Network Setup when connecting your TV
to a network that requires a Static IP address.
Getting the Network Connection Values
To get the network connection values on most windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The network
connection values are displayed.
How to set up manually
To set up your TV’s network connection manually, follow
these steps:
1. Follow Steps 1 through 5 in the “How to set up
automatically” procedure.
2. Set Address Type to Manual.
3. 3UHVV>Ÿź@EXWWRQWRVHOHFW,3$GGUHVVDQGSUHVV>ŻŹ@
button to move the cursor to the entry field. Then press
0~9 buttons to enter the numbers.
4. 3UHVV>0(18@EXWWRQWRH[LW,3$GGUHVVDQGSUHVV>Ÿź@
button to select the next options to enter the numbers.
5 When done, press [MENU] button to return to the
previous menu.
6. Select Connection Test to check the internet connectivity.
Settings
Select connection type
Internet Connection
Interface
Wireless Setting
Information
IP Setting
Connection Test
On
Ethernet
Select Back
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto
176. 16. 0. 0
255. 255. 255. 255
172. 16. 0. 0
172. 16. 2. 2
0. 0. 0. 0
Select Back
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Manual
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Select Back
Network Setup (Auto) Network Setup (Manual)
Settings
Initiate network
connection
Language
Menu Settings
Time Setup
Caption
HDMI CEC
Network
Power LED
Reset Default
English
On
Enter Select Back
22
Advanced Features
To connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below.
Hisense’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Hisense recommends using
IEEE 802.11n router. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly.
NOTES
You must use the Hisense’s built-in Wireless LAN Adapter to use a wireless network, the set doesn’t support external USB
network adapter.
To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your
TV can use a DHCP or static IP address to connect to the wireless network.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is
currently being used by another device nearby, this will result in interference and communication failure.
If you apply a security system other than the systems listed below, it will not work with the TV.
If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2 Mixed) for your Access Point (AP), Hisense TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or
PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
Connection Methods: You can setup the wireless network connection three ways.
-Scan
-Manual
-Auto
Connecting to a Wireless Network
Wireless IP Sharer(Router)
(with DHCP Server)
LAN Cable
Wireless LAN Adapter
built-in TV set
The LAN Port on
the Wall
23
Advanced Features
How to set up
1. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
2. On the Network screen, select Configuration and press
[ENTER] button to enter the submenu.
3. Set Internet Connection to On and Interface to Wireless.
4. Select Wireless Setting and press [ENTER] button to
enter it.
You can select: Scan / Manual / Auto.
5. If you select Scan, a screen will appear listing all of the
ZLUHOHVVQHWZRUNVZLWKLQUDQJHRIWKH798VHWKH>Ÿź@
button to select the wireless network with your router
SSID and press [ENTER] to confirm. Proceed to Step 7.
6. If you select Manual, a screen will appear prompting you
to enter the SSID of your wireless network. Press [ENTER]
and an on-screen keyboard will pop up. Enter the SSID
and select OK. Press [ENTER] to confirm and a screen
will appear prompting you select the security mode for
\RXUZLUHOHVVQHWZRUN8VHWKH>Ÿź@EXWWRQWRVHOHFWWKH
proper security mode and press [ENTER] to confirm. If you
selected None for the security mode, proceed to step 9.
7. A screen will appear prompting you to enter the password
for the selected security mode. Press [ENTER] and an
on-screen keyboard will pop up. Enter the password and
select OK. Press [ENTER] to confirm. Proceed to Step 9.
8. If you select Auto, a screen will appear prompting you
to select PIN (personal identification number) or PBC
(push button configuration) setup. Choose the method
supported by your wireless access point.
Settings
Setup wireless
connection.
Internet Connection
Interface
Wireless Setting
Information
IP Setting
Connection Test
On
Wireless
Enter Select Exit
DLNA Settings
Computer, TV and other digital devices can be connected
via DLNA and they can share files with each other. You
can use the TV set as a DLNA DMP (Digital Media Player)
device to enjoy movies, pictures, music and other multimedia
materials in your computer through DLNA connection.
DLNA Setting needs to be set on TV and computer
Respectively.
1. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
2. On the Network screen, select Configuration and press
[ENTER] button to enter the submenu.
3. Set Internet Connection to On and Interface to Ethernet.
4. Select IP Setting and press [ENTER] button to enter it.
5. Set Address Type to Auto.
6. Auto acquires and enters the necessary connection
values automatically.
7. If the connection values are not automatically entered,
please check your modem and router manuals for
directions to enable automatic IP addressing by DHCP.
Or, follow the steps below to manually configure the
network connection.
If you choose PIN, an identification number will appear
on the screen for you to enter into the access point.
$IWHUHQWHULQJWKH3,1 SUHVVWKH>Ź@EXWWRQ,IWKH
PIN is in use by another device, select [REFRESH] to
obtain a new PIN and enter it into the access point.
$IWHUHQWHULQJWKH3,1SUHVVWKH>Ź@EXWWRQ
If you choose PBC, a screen will appear prompting
WRSUHVV>Ź@EXWWRQ$IWHUSUHVVLQJWKH>Ź@EXWWRQ\RX
have two minutes to locate and press the Push Button
on your access point to connect to the TV.
9. Press the [MENU] button to return to the previous menu.
10.
Select Connection Test to check the Internet connectivity.
Wireless Setting
Network Setup
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto
176. 16. 0. 0
255. 255. 255. 255
172. 16. 0. 0
172. 16. 2. 2
0. 0. 0. 0
Select Back
Settings
Initiate network
connection
Language
Menu Settings
Time Setup
Caption
HDMI CEC
Network
Power LED
Reset Default
English
On
Enter Select Back
24
Advanced Features
To set up your TV’s network connection manually,
follow these steps:
gFollow Steps 1 through 5 in the “How to set up
automatically” procedure.
gSet Address Type to Manual.
8. Set Address Type to Manual, enter IP Setting. Then
SUHVV>Ÿź@EXWWRQWRVHOHFW,3$GGUHVVDQGSUHVV>ŻŹ@
button to move the cursor to the entry field. Then press
0~9 buttons to enter the numbers.
9. 3UHVV>0(18@EXWWRQWRH[LW,3$GGUHVVDQGSUHVV>Ÿź@
button to select the next options to enter the numbers.
10.
When done, press [MENU] to return to the previous
menu.
11.
Select Connection Test to check the Internet connectivity.
1. On the Network screen, select Applications and press
[ENTER] button to enter the submenu.
2. 3UHVV>ŻŹ@EXWWRQWRVHW'/1$WR2Q
Set DLNA to On
Media Share Settings in Computer
If your computer does not support DLNA, you may install
software that supports DLNA such as TVersity or Windows
Media Player. We recommend Windows Media Player as the
installation and setup is easier.
1. Start the Windows Media Player(V11 or higher).
2. Click “Library” and then “Add to Library...”.
3. The “Add To Library” will pop up on the screen. Click
“Add”.
4. Select a folder and click “OK”.
5. Click “Close” to close the dialog.
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Manual
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Select Back
Settings
Set DLNA on or off
DLNA
Netflix
VUDU
PANDORA
On
Select Back
25
Advanced Features
1. Click “Library” and move the cursor to select “Media
Sharing...”
2. Click the box to select “Share my media” and click “OK”.
3. An equipment icon will appear on the white area if
the DLNA Settings has been correctly set. Select the
appropriate icon and then click “Allow”.
4. The TV now has access to the shared files on the
computer.
Network Function
If you use VUDU services, see the following note before
using it.
1. Use of Internet services requires a working broadband
Internet connection (1 to 2 Mbps for SD video, 2.25 to 4.5
Mbps for HD video and 4.5 to 9 Mbps for HDX video).
2. VUDU and other Internet-based services are not provided
by Hisense, may change or be discontinued at any
time and may be subject to restrictions imposed by
your Internet service provider. The quality, functionality,
or availability of such services may be affected by the
capacity of your Internet connection. Use of VUDU video-
on-demand and other Internet services may require the
creation of a separate account through a computer with
internet access.
3. Certain VUDU services may not be available for this TV
model.
4. VUDU video-on-demand and other Internet services may
require payment of one-time and/or recurring charges.
5. You are solely responsible for any charges incurred as a
result of using Internet-based content, including, without
limitation, communications charges for the provision of
Internet or network services and any charges incurred
for third-party Internet content services, such as video on
demand or subscription services. All third-party services
are provided in accordance with whatever terms and
conditions are established between such third-party
providers and you.
6. HISENSE MAKES NO REPRESENTATIONS OR
WARRANTIES ABOUT THE CONTENT, AVAILABILITY
OR FUNCTIONALITY OF THE VUDU SERVICE OR
OTHER INTERNET DELIVERED THIRD-PARTY
SERVICES AND DOES NOT WARRANT THAT ANY
OF THEM WILL BE UNINTERRUPTED, ERROR FREE
OR SATISFACTORY. ANY IMPLIED WARRANTY,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OF ANY THIRD PARTY
CONTENT OR SERVICE, IS EXPRESSLY EXCLUDED
AND DISCLAIMED. UNDER NO CIRCUMSTANCES
WILL HISENSE BE LIABLE IN CONTRACT, TORT OR
UNDER ANY OTHER THEORY FOR ANY DAMAGES
ARISING OUT OF OR IN CONNECTION WITH YOUR
USE OF ANY CONTENT OR SERVICE PROVIDED
BY ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
NOTICE FOR USE
Settings to Share Files
26
Advanced Features
1. Press the [Hi-Smart] button to display network services.
2. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKH$SS\RXZDQW WRYLHZ
and press [ENTER] to launch it.
Enter the Network Applications
Operational buttons
Button Description
Press to launch VUDU Movies App directly.
Open the Hi-Smart Hub with links to various
Internet Services.
Open the digital multimedia player.
Open the menu.
Close the menu.
Return to the previous menu.
ŸźŻŹ Navigate Up / Down / Left / Right or adjust
OSD settings.
Confirm selections.
Press to launch NETFLIX App directly.
Display the TrickPlay screen and fast
reverses playback.
Display the TrickPlay screen and fast
forwards playback.
Play the previous one.
Play the next one.
Pause playback. Press the button to return
to playback.
Stop playback and display the file title
screen.
VUDU HD Movies
VUDU is an on-demand service that offers high-definition
movies on Web.
For enjoying more movies, please register and log in to your
account.
You can access the VUDU HD Movies by the following
method:
1. Press the [Hi-Smart] button to display network hub.
2. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKH98'8+'0RYLHVLFRQ
and press [ENTER] to enter it, or press [VUDU] button to
enter directly.
3. Select the Sign Up Now icon on the VUDU HD Movies
interface, and press [ENTER] to enter.
4. Please read the content of the Disclaimer first. If agree,
press [GREEN] button and then access the network
main menu. If disagree, press [RED] button or [YELLOW]
button to cancel or exit Disclaimer menu, then network
cannot be used.
5. Enter your email address to start your VUDU experience.
(Refer to “How to Input the Email Address” on page 27.”)
Brief introduction
Operation instructions
Disclaimer
All content and services accessible
through this device belong to Hisense Electric
&R/WGLQFOXGLQJLWVDDI¿OLDWHV+LVHQVHRU
"we"or "us") or third parties and are protected
by copyright, patent, trademark and/or other
intellectual property laws. Such content and
services are provided solely for your personal
non-commercial use. You may not use any
content or services in a manner that has not
been authorized by the content owner or
service provider. Without limiting the
Agree Cancel
Page Up/Down Exit
27
Advanced Features
How to Input the Email Address
VUDU HD Movies home page
6. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRVHOHFW
service items in the VUDU HD Movies home page, and
press [ENTER] button to confirm.
7. In the process of watching a movie, press [ENTER] button
WRGLVSOD\H[LWWKHWRRO EDUSUHVV>ŻŹ@EXWWRQWRVHOHFW
the function icon, and press [ENTER] button to confirm.
8. Press [RETURN] button to return the upper menu, or
press [EXIT] button to close the menu.
Tool Bar
13UHVV>(17(5@EXWWRQWRHQWHUDQGSUHVV>ŻŹ@EXWWRQWR
select the chapter.
2Stop playback.
3Fast backward. Press [ENTER] to select the backward
speed. You can press [ ] button to achieve the function.
43OD\3DXVH<RXFDQSUHVV>Ź,,@EXWWRQWRSOD\SDXVH
directly when there is no control bar on the screen.
5Fast forward. Press [ENTER] button to select the forward
speed. You can press [ ] button to achieve the function.
6Progress bar. The progress bar when playing.
0:00:34 0:02:32
Chapters
1 2 3 4 5 6
1. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRWKH
address bar and press [ENTER] button to confirm.
2. Press [ENTER] button to display the keyboard.
There are some shortcuts on the bottom of the keyboard
so that you can input part of the address often used
directly.
Other keys are used as the keyboard of your computer.
3. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRWKH
characters you want to select and then press [ENTER]
button to confirm.
If you want to delete one character, move the cursor to
Back key and press [ENTER] button to confirm.
4. Move the cursor to Done key and press [ENTER] button
to confirm if you have completed the address input. Then
the new address will appear on the address bar.
abcde f gh i j k lm
nopq r s t uvwxyz
0123456789@.com
Symbols Space Shift
Enter email address
Back Done
Enter email address
Enter email address to begin enjoying VUDU!
Press for help
Title Function
New The latest movies
Top Picks Mostly picked up movies
Top Rentals Mostly rented movies
New Trailers Latest trailers
Coming Soon The movies can be picked soon
Browse Browse all the movies in VUDU
Collections Browse the classified movies
My VUDU The movies user bought or rented
Search Search movies in VUDU
VUDU HD Movies subpage
Title Function
Rent/Own To rent or buy current movie
Watch Trailer To watch trailer of the current movie
2 Minute Preview To preview current movie for 2 minutes
Add to Wishlist Add current movie to your Wishlist
Rate/share To rate current movie or share it to your
friends in Facebook or Twitter
Overview The overview of current movie
Cast & Crew The cast and crew of current movies and
find their related movies
Reviews The reviews of current movie
Similar The similar types of movies
More Info The detail information of current movie
28
Brief introduction
Advanced Features
VUDU Apps
The applications platform for connected TVs.
VUDU Apps provides customers with access to a wide
range of Internet services and applications including
streaming video, music on demand, photo browsing,
social networking and more.
VUDU Apps supports the development of responsive
apps designed specifically for use on home HD
televisions.
VUDU Apps uses a unique, cloud-based architecture
optimized for consumer electronics devices, including
delivering the latest applications to consumers without
the need for software downloads or frequent firmware
updates.
You can access the VUDU Apps by the following methods:
1. Press the [Hi-Smart] button to display network hub.
2. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKH98'8$SSVLFRQDQG
press [ENTER] to enter it.
3. 3UHVV>ŻŹŸź@EXWWRQWRVHOHFWWKHZLGJHW\RXZDQWWR
access, and press [ENTER] to enter it.
4. You can press [RETURN] to return the upper menu or
press [EXIT] button to close the Widgets display.
MY FAVORITES
MOST POPULAR
NEWEST
BROWSE BY GENRE
SHOW TICKER
INFO&SETTINGS
Netflix
1HWÀL[XQOLPLWHGPHPEHUVKLSUHTXLUHG
Instantly watch thousands of TV episodes & movies
streaming over the Internet from Netflix. Unlimited
membership required.
NOTES
TV screen may be difference with picture.
For more information on Netflix visit http://www.netflix.
com/help or login to your Netflix account and click “Help”
at the top of the page.
Your broadband fluency and picture quality depend on
the network speed and original bit rate.
Illustrations are examples and may differ from the actual
Netflix screens. The display and operations may change
as a result of a software update. Use Netflix without
configuring a proxy server. Part or all of Netflix may not
be available when connecting to the Internet via a proxy
server.
Title Function
My favorites The user’s favorite applications
Most popular The most popular applications
Newest The newest applications in VUDU
Browse by genre Browse applications by genre
Show Ticker Show the applications at the bottom of
screen while watching TV
Info & settings VUDU Apps system information
Operation instructions
VUDU Apps home page
Brief introduction
1. Press the [Hi-Smart] button to display network hub.
2. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKH1HWIOL[LFRQDQGSUHVV
[ENTER] to enter it, or press [NETFLIX] button to enter
Netflix website directly.
3. Input Email and Password in following window to sign in.
(Refer to “How to Input the Email Address” on page 27)
4. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRVHOHFW
service items in the Netflix home page, and [ENTER]
button to confirm.
5. In the process of watching a movie, press operational
buttons to control the movie.
6. Press [RETURN] button to return the upper menu, or
press [EXIT] button to close the menu.
Operation instructions
29
Advanced Features
1HWÀL[0RYLHVKRPHSDJH
Title Function
Suggestions for you The movies suggested for you by Netflix
New Arrivals The new arrivals
Genres Browse movies in different genres
Instant Queue Your list of movies
Search Search for available titles
With YouTube you can watch original videos, music videos,
feature length movies, shorts, and trailers on your TV
screen. Search or browse the recommendations with the TV
remote control.
1. Press the [Hi-Smart] button to display network hub.
2. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKH<RX7XEHLFRQDQGSUHVV
[ENTER] to enter it.
3. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRVHOHFW
service items in the YouTube home page, and [ENTER]
button to confirm.
4. Press [RETURN] button to return the upper menu, or
press [EXIT] button to close the menu.
YouTube
Brief introduction
Operation introduction
Pandora is a personalized radio service that streams music
on your TV. Just start with the name of one of your favorite
artists, songs, comedians, or composers and Pandora will
create a custom station that plays similar tracks. Pandora
features hundreds of music and comedy genre stations.
Create up to 100 stations so you can easily switch between
favorites.
For enjoying more movies, please register and log in to your
account.
1. Press the [Hi-Smart] button to display network hub.
2. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKH3DQGRUDLFRQDQGSUHVV
[ENTER] to enter it.
3. Input Email and Password in following window to sign in.
(Refer to “How to Input the Email Address” on page 27)
4. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRVHOHFW
service items in the Pandora home page, and [ENTER]
button to confirm.
5. Press [RETURN] button to return the upper menu, or
press [EXIT] button to close the menu.
With Picasa App you can explore featured photos in Google
Picasa Web Album, also you can search your favorite photos
in Google Picasa Web Album. If you have already had a
Google Picasa account, you can enjoy your private photos
stored in Google Picasa Web Album.
1. Press the [Hi-Smart] button to display network hub.
2. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKH3LFDVDLFRQDQGSUHVV
[ENTER] to enter it.
3. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRVHOHFW
service items in Picasa screen and [ENTER] button to
confirm.
Pandora
Picasa
Brief introduction
Brief introduction
Operation introduction
Operation introduction
30
Advanced Features
With AccuWeather App you can instantly get the latest
weather information of the city you added.
Vimeo App provides plenty of HD video. All these video
are mainly divided into two parts: Featured Video and
Categories Video which includes Activism &Non Profits,
Animation &Motion Graphics, Art, Comedy, Education &DIY,
Everyday Life, Experimental, Films, HD, Music, Products
&Equipment, Science &Tech, Sports and so on.
When you sign in this App , you can bookmark you favorite
movie and watch the movie last watched.
1. You can choose the movie you like to watch in Featured
and Categories in home page.
2. If you want to sign in vimeo , please choose Setting.
3. After signing in vimeo, you can save your favorite video
to My Stuff or Watch Later.
4. Choose Search to search the name of movie or music
you love.
5To use other features, press the button showed in the
help bar.
6Press [RETURN] button to return to the upper menu, or
[EXIT] button to close the App.
AccuWeather
Vimeo
Brief introduction
Brief introduction
Operation introduction
4. To use other features, press the button showed in the
help bar.
5. Press [RETURN] button to return to the upper menu, or
[EXIT] button to close the App.
VUDU customer care: To learn more about VUDU, visit
the frequently Asked questions at www.vudu.com/support.
1HWÀL[FXVWRPHUVHUYLFH:
US: (866) 716-0414
Canada: (866) 348-2353
Network Apps Service Information
1. Press the [Hi-Smart] button to display network hub.
2. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKH$FFX:HDWKHULFRQDQG
press [ENTER] to enter it.
3. 3UHVV>ŸźŻŹ@EXWWRQWRPRYHWKHFXUVRUWRVHOHFW
service items in AccuWeather screen and [ENTER] button
to confirm.
4. To use other features, press the button showed in the
help bar.
5. Press [RETURN] button to return to the upper menu, or
[EXIT] button to close the App.
Operation introduction
31
Tool bar
1The progress bar when playing.
23OD\3DXVH<RXFDQSUHVV>Ź,,@GLUHFWO\WRSOD\SDXVH
when there is no control bar on the screen.
3Play the previous video. You can press [ ] directly to
achieve the function when no control bar display on the
screen.
4Play the next video. You can press [ ] to achieve the
function when no control bar display on the screen.
5Fast backward. Then press [ENTER] to select the
backward speed. You can press [ ] to achieve the
function.
6Fast forward. Then press [ENTER] to select the forward
speed. You can press [ ] to achieve the function.
7Select time to play
g3UHVV>ŻŹ@WRVHOHFWWKHSRVLWLRQ\RXZDQWWRVHW
g3UHVV>a@WRVHW WKHWLPHDQGSUHVV>ŸźŻŹ@WR
adjust it.
gPress [ENTER] to confirm and the video will to play at the
time you have set.
8Play list
g3UHVV<HOORZ%OXHEXWWRQWRSDJHDQGSUHVV>Ÿź@WR
select the video.
gPress [ENTER] to confirm. And press [Exit] to exit the
menu.
9Options
g3UHVV>Ÿź@WRVHOHFWWKHRSWLRQVLQWKHPHQX
g3UHVV>ŻŹ@WRVHOHFWWKHVHWWLQJV
gPress [ENTER] to confirm.
10
Program info
Allows you to view the program information.
11
Stop playback
Advanced Features
1. Press [RED] button to switch to All or Video.
2. Press [Ÿ
Ÿ
/
Ÿ
/
Ÿ
] to select the video you want to view.
3. Press [ENTER] to play the video.
4. Press [ /RETURN] to exit the video and return to the
previous directory.
5. Press [ENTER] button to display/exit the video control
bar.
6. 3UHVV>ŻŹ@EXWWRQWRVHOHFWWKHIXQFWLRQLFRQDQGWKHQ
press [ENTER] to confirm.
Please note that Hisense will not assume any responsibility
for any lost data and cannot guarantee perfect compatibility
with all mass storage devices. Be sure to insert the USB
disk or mobile hard disk with standard USB2.0 port.
Press [INPUT] button to display the INPUT menu, press
>Ÿź@EXWWRQWRKLJKOLJKWWKH+L'03VRXUFHWKHQSUHVV
[ENTER] button to confirm. (If you want to exit Hi-DMP,
you can press [INPUT] button to switch to other sources).
Press [RED] button to switch the media type.
Press [YELLOW/BLUE] to turn to the previous/next page.
1. 3UHVV>ŸźŻŹ@EXWWRQWRVHOHFWWKHIROGHUILOH\RXZDQW
to open and then press [ENTER] to enter/play the folder/
file.
2. Press [RETURN] to return to the previous directory.
Digital Media Player
Enjoy Video Files
NOTE
You can press [ASPECT] button to change the aspect
ratio (Normal, Full Screen, Original Size) while playing
the video.
00:00:36/00:20:01
I
II
I
̰
1
2 3 4 5 6 7 8 9
10 11
Playable format list
Files Format Playable format
Photo JPG
Music MP3
Video MPEG1(.dat), MPEG2(.mpg/.ts), XVID(.avi),
H.264(.mov/.ts/.mkv)
DMP C:
Information
m.mp3
Select Enter Return Media Type Page up/down
Return F1 F2 F3
P.jpg m.mp3 v.dat t.txt
All
Video
Music
Picture
Book
Option Set
Repeat
Subtitle Selection
AUDIO
Once
NO
I/I
Select Enter Exit
32
3. Press [ENTER] to browse the picture.
4. Press [ /RETURN] to exit the picture and return to the
previous directory.
Tool bar
When browsing the pictures
Press [ENTER] button to display/exit the picture control bar,
DQGSUHVV>ŻŹ@EXWWRQWRVHOHFWWKHIXQFWLRQLFRQDQGWKHQ
press [ENTER] button to confirm.
1Browse the previous picture. You can press[ ] button
directly to achieve the function when no control bar
displays on the screen.
2Browse the next picture. You can press [ ] button
directly to achieve the function when no control bar
displays on the screen.
3Allows the picture to rotate 90 degrees clockwise.
4Allows the picture to rotate 90 degrees anti-clockwise.
5Play/pause. You can press [ENTER] button directly when
no control bar on the screen.
66WRSEURZVLQJWKHSLFWXUH<RXFDQSUHVV>Ŷ@EXWWRQ
directly when no control bar on the screen.
7Zoom in the picture.
8Zoom out the picture.
92SWLRQ6HW3UHVV>Ÿź@EXWWRQWRVHOHFWWKHRSWLRQVDQG
SUHVV>ŻŹ@EXWWRQWRVHWWKHP
gSpeed: Allows you to browse the picture at different
speed.
gEffect: Allows you to set how the picture appears on the
screen.
gBackground Music: Allows you to enjoy the music when
browsing the pictures if it is set On.
10
Picture info. Allows you to view the picture information.
Option Set
Speed
Effect
Background Music
Fast
None
Off
Enter
Advanced Features
1. Press [RED] button to switch to All or Music.
2. 3UHVV>Ÿ/
Ÿ
/
Ÿ
/
Ÿ
] to select the music you want to enjoy.
3. Press [ENTER] to play the music.
4. $OOWKHPXVLFLV OLVWHGRQWKHOHIW3UHVV>Ÿź@EXWWRQWR
VHOHFWWKHPXVLFDQGSUHVV>Ź@EXWWRQWRPDUNLW<RXFDQ
press [YELLOW/BLUE] button to turn to the previous /
next page. Press [GREEN] button to select the Mode:
Mark / All / Single.
5. Press [RETURN] to exit the music playback interface.
1. Press [RED] button to switch to All or Picture.
2. 3UHVV>Ÿ/
Ÿ
/
Ÿ
/
Ÿ
] to select the picture you want to view.
Enjoy Music Files
Browse the Pictures
Current Playing: a3.mp3
a1.mp3
m.mp3
a2.mp3
a3.mp3
01/01
Mode: None
Status: Play
Title: a1
Artist:
Album:
Genre: Other
Year:
Duration:00:04:13
Next:
00:00:24/00:04:13
Mode Select Return
Mark Play/PausePage up/down
III ̰
1 2 3 4 5 6 7 8 9
10
DMP C:\ music
Information
music
Select Enter Return Media Type Page up/down
Return F1 F2 F3
a1.mp3 m.mp3 a2.mp3 a3.mp3
All
Video
Music
Picture
Book
DMP C:\ Picture
Information
Picture
jpg
257:383
Select Enter Return Media Type Page up/down
Return 1.jpg 2.jpg 3.jpg
All
Video
Music
Picture
Book
33
Advanced Features
Browse the Text Files
1. Press [RED] button to switch to All or Book.
2. 3UHVV>Ÿ
Ÿ
/
Ÿ
/
Ÿ
] to select the text you want to view.
3. Press [ENTER] button to confirm.
4. Press [ /RETURN] to exit the text and return to the
previous directory.
Tool bar
:KHQEURZVLQJWKHWH[W¿OHV
When no tool bar appears on the screen, you can press
>Ÿź@WRPRYHWKHWH[WOLQHVXSGRZQ
3UHVV>(17(5@WRGLVSOD\H[LW WKHWRROEDU3UHVV>ŻŹ@WR
select the corresponding icons and then press [ENTER] to
confirm.
1Stop/resume automatic page
2View the previous page.
3View the next page.
4Stop browsing.
5Allows you to select page to view.
g3UHVV>a@EXWWRQVWR LQSXWWKHSDJHRUSUHVV>Ÿź@WR
adjust it.
g3UHVV>ŻŹ@WRVHOHFW (QWHUDQGSUHVV>(17(5@WR
confirm.
DMP C:\TXT
Information
TXT
Select Enter Return Media Type Page up/down
Return 1.txt 2.txt t.txt
All
Video
Music
Picture
Book
Goto Page
0000 Enter
1.txt 1/16 Status:Play
I
I
̰
II
1 2 3 4 5
With the Digital Media Receiver you do not have to crowd
around a small tablet PC or smartphone screen to share
video, music or pictures with friends and family. Simply
browse, discover and beam media files stored on your
Android or iOS device to your TV using the Twonky Beam
application.
1. TV side:
Confirm the TV is connected to a local area network. (See
pages 20~23)
Set DLNA to On. (See page 24)
2. Device Setup:
Download the Twonky Beam application using the link
found on the Hisense website at www.hisense-usa.com.
Confirm the device is connected to the same local area
network as the TV.
Launch the Twonky Beam application, select the video,
music or picture you want the share and beam it to the
TV.
You can control the playback using the TV remote or from
the device application.
Digital Media Receiver
Brief introduction
Operation introduction
34
Other Information
Trouble Shooting
When something appears wrong with your TV refer to below chart. If the proposed remedy’s do not work , then unplug
the AC cord from wall, wait at least 60 seconds, plug AC back in and then turn on the TV. If the problem still cannot be
solved, please contact the help line provided on the warranty card or a professional technician.
SYMPTOMS POSSIBLE SOLUTIONS
No sound or picture.
Check if the power cord is plugged into AC outlet and if it has electricity.
Check if you have pressed [POWER] button on the TV or [POWER] button on the remote
control.
Check to see if LED light is either red or blue. If illuminated, power to TV is OK.
I have connected an external source
to my TV and I get no picture and/or
sound.
Check for the correct output connection on the external source and for the correct input
connection on the TV.
Make sure you have made the correct selection for the input mode for the incoming signal.
When I turn on my television, there
is a few second delay before the
picture appears. Is this normal?
Yes, this is normal. That is the TV searching for previous setting information and initializing the
TV.
Picture is normal, but no sound. Check the volume settings.
Check if Mute mode is set “on”.
Sound but no picture or black and
white picture.
If black and white picture first unplug TV from AC outlet and re-plug after 60 seconds.
Check Color Setting if picture is black and white.
Sound and picture distorted or
appear wavy.
An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes
away, move appliance farther away from TV.
Insert the power plug of the TV set into another power outlet.
Sound and picture is blurry or cuts
out momentarily.
If using an external antenna, check the direction, position and connection of the antenna.
Adjust the direction of your antenna or reset or fine tune the channel.
Horizontal/vertical stripe on picture
or picture is shaking. Check if there is interfering source nearby, such as appliance or electric tool.
The plastic cabinet makes a “clicking”
type of sound.
“Click” sound can be caused when the room temperature changes. This change causes the
television cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.
Black square appears in the center
of my television screen?
The Closed Caption function is set in the text mode. To remove it, access Closed Caption from
the menu screen and change the Mode setting from text to either CC1 or off .
On some channels getting another
language or sometimes no sound at
all.
That would indicate that the MTS mode on your unit is set to “SAP” mode. We suggest setting
the MTS mode to either “Stereo” or “Mono”. For further instruction, please see “MTS” in your user
manual.
SAP is Second Audio Program. It’s a second audio channel that is usually used for a second
language or descriptive audio for the visually impaired.
MTS stands for Multichannel Television Sound, a standard that allows the encoding of 3
channels of audio within a standard NTSC (analog) video signal to a television. A television that
is able to receive MTS Stereo allows you to watch television with stereo sound.
Not getting all of my cable channels
on the television or I'm only getting
13 channels.
Check the cable connection for an incoming signal. The best way to confirm signal is to use another
TV and/or contact your cable company.
[CH
V
/ V] don't work when I set the
Channel to Cable? They work with
the Air setting?
After switching to Cable, please auto program the channels. The TV will “remember” all the
channels then the TV will allow you to surf the channels with [CH
V
/ V] buttons.
35
Other Information
SYMPTOMS POSSIBLE SOLUTIONS
Remote control does not work.
Confirm that TV still has power and is operational.
Change the batteries in the remote control.
Check if the batteries are correctly installed.
Confirm the remote control is matched with the TV (see “Match the Remote Control with TV”).
If using a universal remote, be sure to select the TV mode on the remote.
If the remote still does not work:
-remove and reinstall the batteries correctly to reset the remote or install new batteries.
-press TV and then Power to turn on the TV. With a universal remote if you have reset or
changed the batteries you will need to reprogram the remote for the other units.
MATCH: Turn on your TV using the Tap Pad located on the TV (see “Viewing the Control Panel).
Aim your remote control within 6 inches of the lower left corner of your TV. Press the [-] and [LAST]
buttons on the remote control simultaneously for at least 3 seconds. The LED at the top of your
remote will light for one second and blink slowly three times to indicated the remote has paired
with the TV.
Network connection fail.
Check network physical connection, make sure connection is correct.
Enter “Menu”,”Settings”,”Network”,”Configuration” , make sure configuration is correct according
to your network service provider.
Enter “Menu”, “Settings”, “Network”, “Configuration”, “Connection Test” to make sure that
network connection test is successful.
Connect VUDU/Netflix fail.
Check network connection is correct, both physically and configuration.
Enter “Menu”, “Settings”, “Network”, “Configuration”, “Connection Test” to make sure that
network connection test is successful.
For VUDU: Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “VUDU”,
“Deactivation” to reset VUDU account.
For Netflix: Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “Netflix”,
“Deactivation” to reset Netflix account.
Log out VUDU/Netflix or change log
in account.
For VUDU:
1. Press [EXIT] button on remote to exit VUDU.
2. Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “VUDU”, “Deactivation”
to reset VUDU account.
For Netflix:
1. Press [EXIT] button on remote to exit VUDU.
2. Enter “Menu”, “Settings”, “Network”, “Configuration”, “Applications”, “Netflix”, “Deactivation”
to reset Netflix account.
DLNA does not work.
Check network connection is correct, both physically and configuration.
Make sure DLNA server (PC or Mac) has shared media content and TV has permission to
access shared media.
Enter “Menu”, “Settings”, “Network”, “Applications”, turn on “DLNA”.
Select Hi-DMP source to find shared contents. Select “Hi-DMP” source by using [INPUT] button
on remote or press [Hi-Smart] button and then select “Multi-Media” Icon.
How do I get the Hi-Smart Hub to
work on my TV?
You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps.
Connect the TV to the Internet through your router by an ethernet cable or wireless connection.
If the connection fails, check with your internet service provider or router manufacturer to
determine if there is a firewall, content filter, or proxy settings that may block the TV from
accessing the Internet.
After connecting the TV to the Internet, press the [Hi-Smart] button on the remote to access the
Hi-Smart Hub.
Caution: Do not try to repair the TV yourself. Refer all servicing to qualified repair personnel.
36
General
NOTE
Features, appearance and specifications are subject to change without notice.
Other Information
Model Name 50K610GW 55K610GW
Dimension
Without Stand
Width: 44.3 inches (1126 mm)
Height: 26.0 inches (661 mm)
Depth: 2.4 inches (59.8 mm)
Width: 49.1 inches (1248 mm)
Height: 29.3 inches (743 mm)
Depth: 2.3 inches (59 mm)
With Stand
Width: 44.3 inches (1126 mm)
Height: 28.5 inches (724.5 mm)
Depth: 11.2 inches (285 mm)
Width: 49.1 inches (1248 mm)
Height: 31.6 inches (803 mm)
Depth: 13.0 inches (330 mm)
Weight
Without Stand 39.7 lbs (18 kg) 49.8 lbs (22.6 kg)
With Stand 46.3 lbs (21 kg) 58.6 lbs (26.6 kg)
LCD Panel Minimum size
(diagonal) 49.6 inches 54.6 inches
Screen resolution 1920 × 1080
Audio power 10W + 10 W
Power consumption Please refer to the rating label.
Power supply 120 V ~ 60 Hz
Receiving
systems
Analog NTSC
Digital ATSC / QAM
Environmental conditions
Temperature: 41°F ~ 95°F (5°C ~ 35°C)
Humidity: 20% ~ 80% RH
Atmospheric pressure: 86 kPa ~ 106 kPa
Component Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 Hz
VGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)
HDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)
The remote control requires:
1XPEHURI%DWWHULHV
7\SH$$$
9ROWDJH9FF

Navigation menu