Hisense Electric LCDF0029 Part15 Subpart B-LED LCD TV User Manual ES G133747
Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV ES G133747
Contents
W9HLCDF0029_ User Manual 1(P21-28)
Basic tures Using the Audio Menu - STEREO: Select this option (or programs broadcast in — 51mm U SAP: Depending on the particular program being broadcast. you can listen to a ioreign-language translation Equalizer ~ simwo r Audio Language - Change the default value for audio ““5 5‘7”“ . > language. (Digital channels only) TV Speaker - Selects where to play TV audio. You can select On (delault setting) to play audio through TV speakers. or select Off to play audio through the speakers on an external audio system. Reset Audio Settings - Resets all Audio Settings to the Sound Mode - Select the Sound Mode: Standard. Speech. factory defaults. Custom or Music. You can adjust: Balance - Adlust the volume oi the left and right speakers. Equalizer - Soften or enhance the sound at speCific frequency points. m Au Equalizer l) n n n ‘1) (A) Q rtDDE «2M saw: 1 5m mu mm Subwoofer , Turn subwoofer lnternal Subwoofer or Off.(May not be accessible, depend on your TV series and size.) Bass Boost - Adlusts the eflect of bass It will not be available when Subwoofer is Off. (May not be accessible. depend on yourTV series and size.) Auto Volume Control , Automatically adyusts volume to a consistent level. attenuates loud passages. Advanced Audio - Access Advanced Audio settings such as Digital Audio Output. MTS/SAP. Audio Language. TV Speaker. Digital Audio Output: Send digital audio to an external audio system. You can select PCM. RAW or Off. I PCM: PCM outputs two channel audio regardless of the input Vormat. . RAW: When the data stream carries Dolby signal. digital SPDlF outputs Dolby data stream. When the data stream carries no Dolby signal. it transports PCM data stream. MTSISAP: Select the default audio stream. you can select Mono. Stereo or SAP (Second Audio Program). I MONO: Select this option if there is noise or static on weak stereo broadcasts. Bas Using the TV Menu re 5 Using the Setup Menu Tun Mada Antenna Au! l'il'icl Scorch nnel Ship rmriie Liu Signal Strength Audio Only You can adjust: Tuner Mode - Select the TV signal source. You can select Antenna or Cable. Auto Channel Search - Scans for channels that have signals and stores the channels information in memory. Digital channels: The scanned TV program in digital signals Analog Channels: The scanned TV program in analog signals Channel Skip -You can cancel a channel stored in memory. 3 NOTE When you press [CH VN] (or [CH +l—]) button, your TV skips the channel you cancelled. You can still tune to the channel using the number buttons on the remote control. Favorite List - Display your Favorite List You can add or delete channels to create your favorite list B NOTE When you press [CH VN] (or [CH +l—]) button, your TV skips the channel you cancelled. You can still tune to the channel using the number buttons on the remote control. Signal Strength - This menu is used to check the signal strength of your antenna system. Usually strengths of above 75% indicates an acceptable signal for your TV to display correct image. Each channel may vary in signal / quality strengths and its common for broadcast strengths to change in your area. The signal strength of the channel on the screen is displayed. 3 NOTE If lower than 75% we advise to have your antenna system checked by qualified personnel. Audio Only , Listen to the program audio only, when you turn off the picture on your TV. (May not be accessible, depend on ycurTV series and size.) B NOTE Audio Only works only when the input source is TV. and yourTV is receiving a broadcast signal. To exit audio only mode. press any button. When you exit audio only mode, the Audio Only option is automatically reset to Off Menu Settings nu: .iup Parental Emit Caption You can adjust: Menu Settings -You can set Onrscreen menu system. Language: You can select the menu’s language to EnglishEspaFiol or Francais. Timeout: Select the display time of the menu' 107207 , 60 seconds Time Setup - Set the Country. Time Zone. Daylight Savings. Date/Time, Sleep Timer. Country: Select your local Country Time Zone: Select your local time zone: Eastern, Indiana, Central, Mountain, Arizona, Pacific, Alaska or Hawaii. Daylight Savings: Set the Daylight Saving time for your area. DateITime: Set the current year/month/day/time. Sleep Timer: Select the amount of time before the TV to turns off automatically. Parental Controls - Prevent unauthorized users, such as children, from watching unsuitable programs. When you first use this function. the default password is [0000] Once you input this password, you can set options. You can change password in the Lock submenu. Channel Block: Block selected Channels on the TV. Program Block: Block selected Programs on the TV Rating Enable: Block or unblock TV ratings. U.S. TV Ratings: Restrict TV programs by USA Ratings. U.S. Movie Ratings: Restrict movies by USA Ratings. Canadian English/French Ratings: Restrict movies and TV programs by Canadian Ratings. Open V-Chip: Display an advanced VrChip ratings table for digital channels (USA only). Block Unrated: Block unrated TV programs. Input Block - Block selected Input source on the TV Button Launch/O") - Block or unblock use of the remote control. sic Features Change Password - If you want to change the default password, first enter the new password then enter the same password again. Reset Parental Control - You can reset all locks to factory mode. Reset to Factory Default - Restores the TV configuration to factory settings. You will need to complete the setup for such things as Tuner/Channel settings, Network connection, Date/Time and other user preferences. Following is the description of these ratings. U.S. Movie Ratings General audience Parental Guidance suggested Parents strongly cautioned Restricted No one 17 and under admitted Adult audience only us. TV Ratings All children Direded to older children General audience Parental Guidance suggested Parents Strongty mutioned Mature Audience only All of the ratings below that rating set blocked automatically Suggestive dialogue Strong language Sexual situations Violence Fantasy Violence Canadian English Ratings Children Children 8 years and older General Programming. suitable for all audiences Parents Guidance Vlewets 14 years and older Adult Programming Canadian French Ratings General a+eeneral; Not recommended ior young children Programming may not be suitable ior children under the age or 13 Programming is not be suitable ror ciiiidnm under the age at 15 Programming restricted to adults As you block rating, all rating higher than the ones you select are blocked as well. E.g. it you choose to block the MPAA rating R, the higher ratings, NC-17 and X, are automatically blocked too. Caption -Adjust Closed Captioning settings. Caption Control: Select the Closed Caption mode: CC Off, CC On or CC On When Mute by press the CC button. Analog Closed Caption: Select an Analog Caption setting: CC1~CCd: Closed captioning appears in a small banner across the bottom of the screen. C01 is usually the “printed" version of the audio. CC2-CC4 display content are provided by the broadcaster. Text1~Text4: Closed captioning that covers half or all of the screen. Tsxt1~Text4 display content are provided by the broadcaster. Off: To turn off the Analog Caption. Digital Closed Caption: Select a Digital Caption setting: Service1~Service6 or Off. Digital Caption Style: Customize the look oi digital Closed Captioning. Caption Style: Set the look of Digital CC. “As Broadcaster" uses broadcaster's style. Font Size/StyleIColorIOpacity: Select the size/style/ color/opacity level of font. Background Color/Opacity: Select the color/opacity level of the background. Window Color/Opacity: Select the color of the window. Bas CEC Function -Turn the HDMI-CEO function ON or OFF. Device Auto Power Off: When HDMirCEC is turned on. Device Auto Power Off turns off HDMl CEC devices when you turn off your TV TV Auto Power On: When HDMI-CEC is turned on and you turn on an HDMI CEC device, TVAuto Power On turns on your TV automatically Audio Receiver: When HDMI-CEO is turned on and you have connected an audio receiver to your TV, turning on Audio Receiver lets you use your TV's remote control to control the volume on the audio receiver Device Root Menu: You can open an HDMI-CEC compatible device's root menu, then use your TV's remote control to control the device. Device Discovery: You can display a list of HDMI-CEO devices that are connected to your TV. l? NOTES HDMI cables must be used to connect HDMl CEC- compatible devices to your TV. The connected device's HDMI CEC feature must be tumed on. If you connect an HDMI deVice that is not HDMI CECV compatible, all the HDMIVCEC Control features do not work Depending on the connected HDMI device. the HDMl- CEC Control feature may not work. VGA (Only available in VGA mode.) - Access Computer Settings such as H.Position. V.P05ition. Phase, Clock and Auto Adjust. H.Position: Move the image right or left. V.Posit n: Move the image up or down Phase: Adjust the focus of stable images. Clock: Adjust the sample frequency Auto Adjust: Detects input signal clock, phase and position and adjusts TV display accordingly. Demo Mode - Displays a banner at the top of the screen which describes the key features of the TV. Power LED - Select this feature to turn off or On the Power LED indicator on the front panel on your TV. Version Info - View the software version information. Reset Settings - Restores the TV configuration to factory settings re 5 Using the Network Menu onnrgui :n Au.upi Lie riiiiiwai. Duran: Appilcatluris You can adjust: Configuration - Select On or Off. When On mode is select- ed, the followmg options are available. Internet Connection: Setting the Internet Connection. Interface: You can set up your TV so that it can access the Internet through your local area network (LAN) with a Ethernet or wireless connection. Wireless Setting: You can set up your TVs Wireless connection. Information: Display network configuration information IP Setting: Allows you to set lP address, subnet mask, gateway. primary and secondary DNS. Connection Test: Press the [ENTER] button to test network status Auto Upgrade - Update the software using the Internet. Configure your network. For detailed procedures on using the Network Setup, refer to the “Connecting to the internet or a network" instructions. if you want the Network Update to work automatically, please select Auto Updates (On). If you want to do the Network Update manually, please select Auto Updates (Off) If the internet connection doesn't operate properly. check the Network Configuration settings and try again If the problem persists. use the USB method below to update. Firmware Upgrade - Check the process and it Will prompt you to upgrade the software. 3 NOTES o Software Update can also be performed via downloading the latest software to a USB memory device (www. hisense-usa.com or http //www.hisense-canada com/). n Please be careful not to disconnect the power or remove the USB drive until updates are complete. The TV will be turned on automatically after completing the software update. When software is updated, video and audio settings you made will return to their default settings and your personal settings Will be deleted. We advise you to write down your settings so that you can easily reset them after the update. Applications - Network application. l6 Bas DLNA: Digital Media Player (HiMedia) feature of Digital Living Network Alliance. Press the [4W] buttons to set DLNA to On. Netflix: Deactivate Nettlix and display the excluswe Netflix ESN VUDU: Deactivate VUDU (If available.) PANDORA: Deactivate Pandora. (If available.) My Shared Devices: Allow or deny content sharing from other devices on your network. B NOTES - Software Update can also be performed via downloading the latest software to a USB memory deVice. - Please be careful not to disconnect the power or remove the USB drive until updates are complete. The TV Will be turned on automatically after completing the software update. When software is updated, Video and audio settings you made will return to their default settings and your personal settings will be deleted. We advise you to write down your settings so that you can easily reset them after the update. r intimation Mil: Upgrade upgrade rim Connecting to a Wired Network Network Setup (Auto) Use the Automatic Network Setup to connect the TV to a network that supports DHCP. To set up your TV's network connection automatically. follow these steps: How to set up automatically 1. Connect your TV to your LAN as described in the previous section. 2. Turn on your TV. operate according to the description in the Settings menu until the Network screen appears. 3. On the Network screen. select Configuration and press [ENTER] button to enter the submenu Set Internet Connection to On and Interface to Ethernet. Select IF| Setting and press [ENTER] button to enter it. Set Address Type to Auto. Auto acquires and enters the necessary connection values automatically. 8. If the connection values are not automatically entered. please check your modem and router manuals for directions to enable automatic IP addressing by DHCP. Or. follow the steps listed in the folloWing section. Network Setup (Manual). to manually configure the network connection. NP’U‘P res Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the network connection values on most windows computers. follow these steps. 1. Right click the Network icon in the bottom right of the screen. 2. In the popup menu that appears. click Status. On the dialog that appears. click the Support tab. 4. On the Support tab. click the Details button. The network connection values are displayed. How to manually setup the network connection To set up your TV’s network connection manually. follow these steps: 1. Follow Steps 1 through 5 in the “How to set up automatically" procedure. 2. Set Address Type to Manual. 3. Press [A/V] button to select IPAddress and press [] button to move the cursor to the entry field. Then press 0~9 buttons to enter the numbers. 4. Press [MENU] button to exit IP Address and press [A/V] button to select the next options to enter the numbers 5 When done. press [MENU] button to return to the prevrous menu. 6 Select Connection Test to check the internet connectiVity Wireless Setting How to set up 1. Turn on yourTV. press Menu and select Settings Network. 2. On the Network screen. select Configuration and press the [ENTER] button to enter the submenu. 3. Set Internet Connection to On and Interface to Wireless. 4. Select Wireless Setting and press the [ENTER] button you can select: Scan I Manual [Auto. 5. If you select Scan. a screen will appear listing all of the wireless networks Within range of the TV. Use the [A/V] button to select the wireless network with your router SSID and press the [ENTER] to confirm. Proceed to Step 7. 6. If you select Manual. a screen will appear prompting you to enter the SSID of your wireless network. Press [ENTER] and an on-screen keyboard will pop up. Enter the SSID and select OK Press [ENTER] and a screen will appear prompting you select the security mode for your wireless network. Use the [A/V] button to select the proper security mode and press [ENTER] to confirm. If you selected None for the security mode. proceed to step 9. 7. A screen will appear prompting you to enter the password for the selected security mode. Press [ENTER] and an on-screen keyboard Will pop up. Enter the password and select OK. Press [ENTER] to confirm. Proceed to Step 9. 9’ l7 Advance\ atures 8. If you select Auto. a screen will appear prompting you to select PIN (personal identification number) or PBC (push button configuration) setup. Choose the method supported by your wireless access point. If you choose PIN. an identification number will appear on the screen for you to enter into the access point. After entering the PIN. press the [b] button. If the PIN is in use by another device. select [REFRESH] to obtain a new PIN and enter it into the access point. After entering the PIN. press the [b] button. If you choose PEG. 3 screen Will appear prompting to press [>1 button After pressing the [>1 button you have two minutes to locate and press the Push Button on your access point to connect to the TV. 9. Press the [MENU] button to return to the previous menu. 10 Select Connection Test to check the Internet connectivity. DLNA Setting You can use DLNA Certified computers. TVs. and other devices to play or transfer the videos. pictures. and music stored on your phone . tablet or other devices connected to your network. For more about DLNA (Digital Living Network Alliance). visit www.d|na org. Make sure your phone and TV are both connected to the same Wi-Fi network. I Set DLNA to On: 1. On the Network screen. select Applications and press the [ENTER] button to enter the submenu. 2 Press the [] buttons to set DLNAto On Media Share Settings in Computer if your computer does not support DLNA. you may install software that supports DLNA such as TVersity or Windows Media Player (Version V11 or higher). We recommend Windows Media Player as the installation and setup is easier 1. On the PC taskbar. click Start. 2. Point to All Programs. and then click Windows Media Player. 3 Click “Library" tab and then ”Add to Library. as shown in the following screen shot 4. In the Add To Library dialog box. click "Add" as shown in the following screen shot 5. Select a folder and click “OK". Add To i imiy Slbdtdd-vaww-Imnmlundalin new wanna-w“ mwumtnmbam sum the lolden In new @Mmiufliifit OMyioim-umawmmimmm Maia-4 rm. two a WLMUSIE M-Iu-N mu c mot-menu msmmsmmwmumnMme-s norm M Hmw 'Whmvwdlimhw skalinxm-hlhm Dwmmm-uuliuximl Audoliu inc VMIIM 5w (( Aim-«ed went [cm Setting to Share Files Add Folder 1. Click “Library" and move the cursor to select “Media Select . (old-r: Sharing..." as shown in the following screen shot. 2. In the Media Sharing dialog box, select the Share my a Deskt up A media check box and click “0K". to U My nan-mu w '3 My Conpilhr m ‘3 mm“: Menu‘hormk 3. After turnnig on media sharing, you need to select the devices that should have access to your Player library. An equipment icon will appear on the white area if the DLNA Settings have been correctly set. Select a device and then click “Allow" as shown in the following screen shot, um, Slur m: 4. Then the TV can access to the shared files in the computer. For information about how to customize what media you share with the device. see "Change settings for sharing media" in Windows Media Player Help. i9 Advanced Features Network Function :- NOTICE To access Internet streaming video services, please note the follow requirements. 1. Use of Internet services requires a working broadband Internet connection (1 to 2 Mbps for SD video. 2.25 to 4.5 Mbps for HD video and 4.5 to 9 Mbps for 1030p and 3D video). 2, |nternet»based services are not provided by Hisense, may change or be discontinued at any time and may be subject to restrictions imposed by your Internet service provider. The quality, functionality, or availability of such services may be affected by the capacity at your Internet connection. Use of video-on-demand and other Internet services may require the creation of a separate account through a computer with internet access. 3. Certain services may not be available tor this TV model. 4. Video-on-demand and other Internet services may require payment of onetime and/or recurring charges. 5. Vou are solely responsible for any charges incurred as a result of using Internet-based content. including. without limitation. communications charges for the provision of Internet or network services and any charges incurred for third-party Inlemet content services. such as video on demand or subscription services. All third-party services are provided in accordance with whatever terms and conditions are established between such third-party providers and you. 6. HISENSE MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE CONTENT, AVAILABILITY OR FUNCTIONALITY OF THE VUDU SERVICE OR OTHER INTERNET DELIVERED THIRD-PARTY SERVICES AND DOES NOT WARRANT THAT ANY OF THEM WILL BE UNINTERRUPTED, ERROR FREE OR SATISFACTORY. ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FORA PARTICULAR PURPOSE OF ANY THIRD PARTY CONTENT OR SERVICE, IS EXPRESSLY EXCLUDED AND DISCLAIMED. UNDER NO CIRCUMSTANCES WILL HISENSE BE LIABLE IN CONTRACT, TORT OR UNDER ANY OTHER THEORY FOR ANY DAMAGES ARISING OUT OF OR IN CONNECTION WITH YOUR USE OF ANY CONTENT OR SERVICE PROVIDED BY ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 20 :- Operational buttons mi“ oi Eu 4 Film? y rm mm Description Display the inforrnalion banner. Open the HiSmart Hub with links to various lntemet Services. Open the digital multimedia player. Press to launch YouTube App directly. Open the menu. Close the menu. Return to the previous menu. Navigate Up / Down / Lett / Right or adjust OSD settings. [mm Confirm selections. mm Press to launch NETFLIX App directly. Display the TrickPlay screen and fast reverses playback. Display the TrickPlay screen and fast forwards playback. Play the previous one. Play the next one. Pause playback. Press the button to return to playback. Stop playback and display the file title screen.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2013:09:29 18:01:27+08:00 Create Date : 2013:09:29 18:01:17+08:00 Metadata Date : 2013:09:29 18:01:27+08:00 Creator Tool : CorelDRAW Version 9.397 Format : application/pdf Title : ES-G133747Ó¢ÎÄ Creator : ΢ÈíÓû§ Document ID : uuid:a73566ef-e51a-4364-8a0d-1d9b376ac303 Instance ID : uuid:c63f6090-ad2b-4da5-b70a-cb95f6cb65f1 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 8 Author : ΢ÈíÓû§EXIF Metadata provided by EXIF.tools