| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2206250 |
| Application ID | FxH2kswpzCyjc8yUSiu4dw== |
| Document Description | W9HLCDF0031_User Manual 1(P1-10) |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 363.83kB (4547872 bits) |
| Date Submitted | 2014-03-04 00:00:00 |
| Date Available | 2014-03-10 00:00:00 |
| Creation Date | 2014-02-21 11:37:34 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2014-02-21 11:37:54 |
| Document Title | ES-J135202Ó¢ÎÄ |
| Document Creator | CorelDRAW Version 9.397 |
| Document Author: | X |
CHILD SAFETY:
It Makes A Ditterence How and Where
You Use Your Flat Panel Display
Congratulations on your purChase! As you enioy your new product, please
keep these safety tips in mind:
THE ISSUE
' 'he home theater entertainment experience is a growtng trend and larger
flat panel displays are popular purchases However, flat panel displays
are not always supported on the proper stands or installed according to the
manu‘ac‘urer's recommendatons
0 Flat panel aisploys that are inaopropriatcly situatoa an arcsscrs, bookcases,
sholvcs, dcsks, speakers, chests or carts may loll over and cause iniury
THIS MANUFACTURER CARES!
- 'tne consumer electronics industry is COrr‘rn tted ‘0 making home enter‘air‘rner‘t
enioyable and sate
TUNE INTO SAFETY
I One size does NOT t'tall Follow the manulac'urer's recommendat'ons
tor the sale installation ano use at your tlat panel d’solay
' Caretully read and understand all enclosed instructions tor oroper use of
tnis product
' Don't allow chiloren to clirvb on or play With furniture and televis on sets
' Don't place flat panel displays on turniture that can easily be useo as steps,
such as a chest at drawers
' Rememoer that children can become excited while watching a program,
especially on a "larger tnan lite" tla‘ parel display, Care should be taken to
place or install the display where it cannot be pushed, pulled over,
or knocked down
I Care skould be taken to route all cords and cables connected to the tlat
panel display so that they cannot oe pulled or grabbed by curious children,
WALL MOUNTING: IF YOU DECIDE T0 WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:
- Use a rnount‘lnat nas been iecomtnenaed by the display rnanulactu'er
and/or listed Dy an independent laboratory (such as JL, CSA, Erii
- ’oiiow all instructions supplied by the display and wall mount rnanulacturers
- it you have any doubts abou‘ your abit‘ity to safety install your flat panel
disptay, Contact your retailer abou' prolessionol installation CEA
' Make su'e that the wall where you are mounting the display is appropriate c.t.iumnmnmnaiauui'
Some wall mounts are not designed to De mounted to walls with steel WWW.cE.0Tg/5UTer
studs or old cinder block construc‘ion, ll you are unsure, contac‘ a
protessional installer,
I A rvin mum of wo people are required tor installation Hat panel d solays
can be heavy
Important structions
NF’SnPSQNr‘
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTIONITO REDUCETHE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE COVER (OR
BACK) N0 USER-SERVICEAELE PARTS
iNSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
Read these Instructions.
Keep these Instructions.
Heed all warnings.
Follow all Instructions.
Do not use this apparatus near water.
Clean only WIth dry cloth.
Do not block any ventilation openings. Install in accordance
With the manufacturer's instructions.
. Do not install near any heat sources such as radiators.
heat registers. stoves. or other apparatus (Including
amplifiers) that produce heat.
. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades WIth
one Wider than the other A grounding type plug has two
blades and a third grounding prong. The Wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet. consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs. convenience receptacles. and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only WIth cart. stand. tripod.
bracket. or table specified by the
manufacturer. or sold WIth the
apparatus. When a cart is used.
use caution when moving the cart/ ‘
apparatus combination to avoid Injury 5312“
from tip-over
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way. such as power-supply cord or plug
Is damaged. liquid has been spilled or objects have fallen
Into the apparatus. the apparatus has been exposed to
rain or moisture. does not operate normally. or has been
dropped.
15. Apparatus should not be exposed to dripping or
splashing. and objects filled with liquids. such as vases.
should not be placed on the apparatus.
16.
17.
18
19.
20
21
The lightning flash WIth arrowhead symbol. withIn an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product‘s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits. or where It can fall Into such power lines
or circuits. When installing an outside antenna system.
extreme care should be taken to keep from touching
such power lines or circuits. as contact with them might
be fatal.
Do not overload wall outlets and extension cords. as this
can result In a risk of fire or electric shock.
Do not push objects through any openings In this unit.
as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill
EXAMFLE OFANTENNAGRUUNDINGAS FER THE
NAnoNAi Ei FCTRICAI CODF
GROUND
CLAMP
LECTRIC sEnVIcE
EQUIPMENT 7.. ‘ fl
ANTENNA
LEAD IN WIRE
ANTFNNA
DISCHARGE UNIT
[NEG sEonoN siozoi
GROUNDING coNDucroRs
INEc SEcnoN emit)
VAGROUND CLAMPS
NECVNAT‘ONAL << iPDwERSERVICEGRDUNDING
ELECTR‘CAL CODE ELECTRODE sverM
52”“ (NEcAnI 25a. PART HI
or spray any type of liquid Into the unit.
lfan outside antenna or cable system Is connected to the
unit. be sure the antenna or cable system is grounded to
provide some protection against voltage surges and IJUIIIE
up static charges. Section 810 of the National Electrical
Code. ANSI/NFPA 70. provides Information With respect
to proper grounding ofthe mast and supporting structure.
grounding of the lead-In wire to an antenna discharge
unit. SIZe oi grounding conductors. location oi antenna
discharge unit. connection to grounding electrodes. and
requirements for the grounding electrode.
When repiacement parts are required. be sure the service
technician uses replacement parts specified by the
manufacturer or those that have the same characteristics
as the original part Unauthorized substitutions may result
in fire. electric shock or other hazards.
Upon completion of any service or repairs to this unit.
ask the service technician to perform safety checks to
determine that the unit is In proper operating condition.
Important struct ons
22. When you connect the product to other equipment, turn
off the power and unplug all of the equipment from the
wall outlet. Failure to do so may cause an electric shock
and serious personal injury Read the owner's manual of
the other equipment carefully and follow the instructions
when making any connections
Sudden high volume sound may cause hearing or
speaker damage When you use headphones. (if the unit
is equipped with a headphone jack) keep the volume at a
moderate level. If you use headphones continuously With
high volume sound, it may cause hearing damage.
CONDENSATION:
Moisture will form in the operating section of the unit if the
unit is brought from cool surroundings into a warm room or
if the temperature of the room rises suddenly. When this
happens. unit's performance will be impaired. To prevent
this, let the unit stand in its new surroundings for about an
hour before switching it on, or make sure that the room
temperature rises gradually
23.
Condensation may also form during the summer if the unit is
exposed lo the breeze from an air conditioner. ln such cases.
change the location of the unit
HOW TO HANDLE THE LCD PANEL:
' Do not press hard or jolt the LCD panel. It may cause the
LCD panel glass to break and injury may occur.
' If the LCD panel is broken, make absolutely sure that you
do not touch the liquid in the panel. This may cause skin
inflammation.
lf the liquid gets in your mouth, immediately gargle and
consult with your doctor. Also, if the liquid gets in your eyes
or touches your skin, consult with your doctor after rinsing
for at least 15 Minutes or longer in clean water.
Possible Adverse Effects on LCD Panel:
If a fixed (non-moving) pattern remains on the LCD Panel
for long periods of time, the image can become permanently
engrained in the LCD Panel and cause subtle but permanent
ghost images This type of damage is NOT COVERED BY
YOUR WARRANTY. Never leave your LCD Panel on for long
periods of time while it is displaying the following formats or
images:
" Fixed lmages, such as stock tickers, video game patterns,
TV station logos, and websites.
" Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a normal
(4 3) display (black bars at top and bottom of screen); or
viewmg normal style (4:3) media on a widescreen (16:9)
display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction
but technical limitation. Therefore we disclaim any
responsibility for these symptoms.
‘ LCD Panels are manufactured using an extremely high
level of precision technology, however sometimes parts
of the screen may be missing picture elements or have
luminous spots.
This is not a sign ofa malfunction.
‘ Do not install the LCD Panel near electronic equipment that
produces electromagnetic waves Some equipment placed
too near this unil may cause interference.
‘ Effect on infrared devices - There may be interference
while using infrared devices such as infrared cordless
headphones.
Declaration of Conformity
This device complies With part 15 of the FCC Rules
Operation is subject to the followmg two conditions:
(1) This device may not cause harmful interference and (2)
This device must accept any interference received. including
interference that may cause undesired operation.
End of life directives
Your TV also contains material that can be recycled and
reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at http://
www.eia.org. the Electronic Products Recycling Association
at http://www.eprassociation.ca (for Canada) in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors,
which provide exceptionally sharp Video duality OccaSionally.
a few nonractive pixels may appear on the screen as a
fixed black (in the case of a dead pixel). blue, green, or red
point These nonractive pixels do not adversely affect the
performance of yourTV, and are not considered defects.
Power source
TO USEAC POWER
1. The power cord is attached to the TV at the factory.
2 Connect the AC cord into an AC outlet
(D WARNING
Do not connect this unit to the power using any device
other than the supplied AC cord. This could cause fire,
electrical shock, or damage
Do not use with a voltage other than the power voltage
specified. This could cause fire. electrical shock. or
damage
(D CAUTION
When this unit is not used for a long time, (e g , away on
a trip) in the interest of safety, be sure to unplug it from
the AC outlet
Do not plug/unplug the AC cord when your hands are
wet. This may cause electrical shock
Notices de portantes
MISE EN GARDE
RISQUE DE CHOC LECTRIQUE
NE PAS OUVRIR
ATTENTION: AFIN DE REDuiRE LE RlSOUE DE cHoc
ELEcTRiQuE, NE PAS ENLEVER LE COUVERCLE iou
LE cos) CETAPPARElL NE cONTiENTAucuNE
PlECE REPARAELE PAR L‘UTlLlSATEUR FAlRE APPEL
A UN TECHNlClEN QuALiEiE
. Lisez les instructions
. Conservez les instructions.
. Respectez tous les avertissements.
. Suivez loules les directives.
.N‘utilisez pas cet appareil pres de l‘eau.
. Ne le nettoyez qu'avec un linge sec
. Ne bloquez pas les évents Eflectuez l’installation
conformément aux directives du fabricant
. Ne l'inslallez pas pres d’une source de chaleur comme un
radiaieur, un registre, une cuisiniere ou autre (y compris
un amplificateur) produisant de la cnaleur.
. N‘enlevez pas le dispositif de se'curite de la fiche pclarisee
ou avec misc 5: la terre. Une fiche polarise’e ccmporte
deux lamelles dcnt une est plus large que l'autre. Une
fiche avec mise 3: la terre Comporle deux lamelles et une
broche de terre La lamelle large et la broche de terre sont
fourriies pour votre sécuri Si Ia fiche ne conVient pas a
la prise de courant. consuliez un électricien etfaites
remplacer la prise de courant.
0. Placez le cordon d'alimentaticn de iacon a ce qu'il ne soil
pas ecrase ou pince surtout au niveau de la fiche, des
prises et au point de sortie de l'appareil
1. N‘utilisez que des peripheriques/ accessoires specifies
par le fabricanl
2. Ne l'utilisez qu’avec un chariol.
un trepied. un support ou one
table spe’cil’iée par le fabricani
ou vendue avec l'appareil. Si
vous utilisez un chariot, soyez
prudent quand vous le deplacez
aiin d‘éviter que l'ensemble
chariot/te'léviseur culbute.
3 Débranchez l'appareil Iors d'un orage élecirique cu s'il
n’est pas utilise' pendant une période prolongée.
4. Ccnfiez le semice a une personne qualifiee Un service
esl requis si l'appareil est endommagé d'une facon
quelconque (cordon d'alimentation ou fiche
endommage’e, liquide renversé ou objet échappé dans
l'appareil, appareil expose a la pluie cu a l'humidite,
mauvais fcrictionnemerit DU appareil échappé)
5. L'appareil ne devrait pas etre expose aux e'claboussures.
Ne placezjamais d'ohjets remplis de liquide (comme un
vase) sur l’appareil
6. Une antenne exterieure ne devrait pas étre située a
proximite' des lignes naute tension, d'un éclairage
$3125A
17.
1E.
19.
20.
21.
L‘eclair avec symbole de flecne dans un triangle
equilateral avise l'utilisateur de la presence d'une
tension dangereuse non isolee dans le ooiier du produit
et qui peut etre d'intensite suffisante pour presenter un
risque de choc electrique.
Le point d'exclamation dans un triangle equilateral
avise l'utilisateur de la presence de directives
d‘utilisation et d'entretien (service) importantes dans la
documentation qui accompagne I'appareii
electrique ou d'autres circuits électriques, rii I'a 0U elle
pourrail s’e’craser centre des lignes Du circuits
électriques. Lors de l'installation d‘une antenne
extérieure, il laul prendre les mesures nécessaires pour
éviter de toucher les lignes ou circuits electriques car un
tel contact pourrait étre mortel.
Ne surcnargez pas les prises murales ni les rallonges car
cela présente un risque d‘incendie ou de choc electrique
N'insérez aucun objet dans les ouvertures de l’appareil
car vous pourriez toucher uri point de tension
dangereuse ou couri-circuiter une pi‘ece résultant en un
incendie cu un cncc electrique. Ne renversez nine
pulve'risez aucun liouide dans l'appareil.
EwaLE us MlSE A LA was mum: SELON LE
coDE NAYiDNAL as L‘ELEDYRlClYE
rFlL D‘ANTENNE
comm: as MlSE
A LA rEran
uNlYE in: am me:
o News
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
XMP Toolkit : 3.1-701
Modify Date : 2014:02:21 11:37:54+08:00
Create Date : 2014:02:21 11:37:34+08:00
Metadata Date : 2014:02:21 11:37:54+08:00
Creator Tool : CorelDRAW Version 9.397
Format : application/pdf
Title : ES-J135202Ó¢ÎÄ
Creator : X
Document ID : uuid:7d373c89-f467-4ad6-9215-607140ecf88c
Instance ID : uuid:e12a2fc0-8bb6-4ecd-bd34-a10a5d448cbe
Producer : Acrobat Distiller 9.0.0 (Windows)
Page Count : 10
Author : X
EXIF Metadata provided by EXIF.tools