Hisense Electric LCDF0041 Part15 Subpart B-LED LCD TV User Manual ES J135202
Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV ES J135202
Contents
W9HLCDF0041_User Manual 1(P9-16)
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2244069 |
| Application ID | eP5pYpekt5NCaUdsSisk7w== |
| Document Description | W9HLCDF0041_User Manual 1(P9-16) |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 267.21kB (3340105 bits) |
| Date Submitted | 2014-04-17 00:00:00 |
| Date Available | 2014-04-20 00:00:00 |
| Creation Date | 2014-04-14 16:17:54 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2014-04-14 16:18:07 |
| Document Title | ES-J135202Ó¢ÎÄ |
| Document Creator | CorelDRAW Version 9.397 |
| Document Author: | X |
VUDU Apps . Netflix ........... Opera Apps.. Viewster ....... Vimeo ............................................................................................................. 24 Facebook.. Browser Pandora Twitter... Picasa ............................................................................................................. 26 Digital Media Receiver (HiBeam). Digital Media Player (HiMedia) ..... Browse Pictures ..... Enjoy Video Files... Enjoy Music Files ............................................................................................ 29 Troubleshooting .............................................................................................. 30 Getting started Installing Batteries in the Remote Control :- Change the batteries 1. Press the release button on the back of the remote control to remove the battery compartment cover. 2. Insert twoAAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and (- ) ends indicated in the battery compartment. 3. Replace the battery compartment cover, 0 Remove the battery compartment cover 0 Insert the batteries \ ”k— Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire. Remove depleted batteries immediately to prevent leakage into the battery compartment. If you do not intend to use the remote control for a long time. remove the batteries. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. 5"???)9 Battery chemicals can cause a rash. lfthe batteries leak. clean the battery compartment with a cloth. If chemicals touch your skin. wash immediately. 6. Do not mix old and new batteries, 7. Do not mix alkaline. standard (carbon-zinc) or rechargeable (ni-cad. ni-mh. etc.) batteries. Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television! If you would like to program your other household remote controls to your new Hisense television, please consult the User's Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers' User’s Manuals should include instructions on how to program their remote to your television. Below is a list of Hisense codes for the most common Cable and Satellite providers. Use the Hisense code that is associated with your Cable or Satellite provider(if applicable). DIRECTV. .0178 or10019 Time Warner Cable .. 386 or 0178 Comcast.. .0175 or1017B Cox Communications 0178 Dish Network ..... ...,627 or 505 AT&T U-verse 1346 If the Hisense code associated with your Cable or Satellite provider is not listed above, if the code above does not work, or if you cannot locate the instructions for programming your household remote to your television, call your local Cable or Satellite provider's customer service center. If your Cable or Satellite provider does not have an Hisense code available, please visit http://www.hisense-usa.com or httgz// www.hisense—canada.com/ (for canada) for additional codes. :- The effective range of remote control 1. The remote control distance: up to 26 feet in lront of the TV set. 2. The remote control angle: +/— 30-degrees (horizontal and vertical). Gett n9 Started Making connections ~ Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. - Not all AN devices have the ability to connect to a TV, please refer to the user manual of your A/V device for compatibility and connections procedure. ~ Always unplug the power oord when connecting external equipment. :- Connecting an antenna, cable or cable/satellite box 1. Turn off the TV before connecting the antenna. 2. Connect one end oi a coaxial cable (not included) to the RF OUTjack on the antenna, cable or cable/satellite box. If you are using an antenna with twin»|ead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your TV. Likewise, it you are using several antennas, you may need a combiner (not provided). 3. Connect the other end 01 the cable to the ANT/CABLE jack on the side of your TV. TV JACK EXTERNAL DEVICES at. Miami :- Connecting an AIV Device with Composite Cable 1. Use the audio and video cables to connect the external AN device’s composite video/audio jacks to the TVs jacks. (Video = yellow, Audio Left = white, and Audio Right = red) Connect the yellow video plug to the Green V—inputjack on the T\L 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source lrom the TV. EXTERNAL DEVICES WhitelL) Av Cable WhltelL) (not Included) Velluwt‘fideo) Yellowwldeo) Getting Sta ted :- Connecting an AIV Device with Component (YPBPR) Cable 1. Use a component cable to connect the external AN device’s component output jacks to the TV's VPBPR jacks. Use an audio cable to connect the external AN device’s component audio jacks to the TV's AUDIO (L/R) jacks. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source trom the TV. EXTERNAL DEVICES TV JACK fl §©§ Audlo Cable (not inctuded) Component Cable (not included) Comwnent/ :- Connecting an AIV Device with HDMI Cable 0 Support digital connections between HDMI - enabled AN devices such as PVR, DVD, BIu-ray, AV receiver and digital devices. 0 Some devices such as F'VR or DVD player require HDMI signal to be set to output in the device's settings 0 Please consult your device user manual for instructions. 1. Use an HDMI cable to connect the A/V device's HDMI outputjack to the TV's HDMI jack. 2. Plug the connected devices into the mains socket before switching on the TV . 3. Select the corresponding source trom the TV. EXTERNAL DEVICES TV JACK 5 HDMI Cable 3 I (not included) '1 we“ Equipment with HDMI jacks The HDMI connector provides both video and audio signals, it’s not necessary to connect the audio cable. :- Connecting a headphone TV JACK EXTERNAL DEVICES Headphones can be connected to the AUDIO OUT/0 output on your set. (While the headphone is connected, the sound mm from the built»in speakers is disabled.) WHO Gett n9 Sta ed :- Connecting a PC with VGA Cable 1. Use a VGA cable to connect the PC's VGA output jack to the TV's VGAjack. Use an audio cable to connect the PC's audio outputjack to TV's PC/DVI AUDIO IN jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source lrom the TV. TV JACK EXTERNAL DEVICES Audio Cable tnot Included! VGA Cable Him includedl - Primarily this unit is intended for use as an LCD TV. If you want to use it as a monitor. please contact the manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility is not guaranteed. - The VGA cable is not supplied with the product. I We strongly recommend the use at a VGA cable with two ferrite cores to reduce interterence. (as shown in the illustration). :- Connecting an Audio Receiver with Audio cable 1. Use an audio Optical cable to connect the AN device’s digital audio in jack to the TV's DIGITAL AUDIO OUT jack. Or use an RCA Y—cable (1/8"-stereo mini to LIR phono - not provided) to connect analog sound system to the TVs AUDIO OUT/O jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source trom the TV. TV JACKS EXTERNAL DEVICES DIGWAL more our Audio cable a .—. (not lncluded) mm MR HM! I AudioCabIe m u m (notlncluded) WhiIeL - When a digital audio system is connected to the DIGITAL AUDIO OUT jack, decrease the volume 0' both the TV and the system. - 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 51 CH. - When the receiver (home theater) is set to on, you can hear sound output from the TVs digital audio out jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack trom your DVD/BIu-ray player/cable box/8TB satellite receiver directly to an amplifier or home theater. Gett ng Started Network Connection You can set up your TV so that it can access the Internet through your local area network (LAN) with a Ethernet or wireless connection. :- Connecting to a Wired Network You can attach your TV to your LAN by one of the three following ways: I You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 LAN cable. See the diagram below. The Modern Port on the Wall LAN Port on TV External Modern (ADSL / VDSL / Cable TV) Modem Cable 0 You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is connected to an external modem. Use LAN cable for the connection, See the diagram below, The Modern Port on the Wall External Modem IP Sharer (Router) LAN Port on TV (ADSL / VDSL / Cable TV) (with DHCP sewer) Modern Cable LAN Cable 0 Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet with a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. The LAN Port on the Wall LAN Port on TV LAN Cable If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don't have to enter them manually. Most home networks are Dynamic Networks Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV's Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway. and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer. you can also get these values through your computer. You can use ADSL modems that support DHCP it your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses. Gett ng Started :- Connecting to a Wireless Network To connect your TV to your network wirelessly, you need a wireless router or modern. See the illustration below. KKK lWireless IP Sharer(Router) The LAN Port on (With DHCP Sewer) the Wall >33 Wireless LAN Adapter built-in TV set LAN Cable Hisense’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Hisense recommends using IEEE 802.11n router. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly. . You must use the Hisense's built-in Wireless LAN Adapter to use a wireless network. the set doesn't support external USB network adapter. - To use a wireless network, your TV must be connected to a wireless IP sharer. lfthe wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. . Select a channel for the wireless IP sharer thal is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. - If you apply a security system other than the systems listed below, it will not work with the TV. - If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-AES (WPSZ Mixed) for yourAccess Point (AP), this player will not suppon a connection in compliance with new Wi-Fi certification specifications. - If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. - Connection Methods: You can setup the wireless network connection three ways. -Scan -Manual -Auto _—‘- Turning your TV on or off To turn your TV on or off (standby mode). 1. Plug the power cord into an AC power outlet. 2. Press [POWER] button. YourTV turns on. 3. Press [POWER] button again to turn off your TV. When you turn oft your TV, it goes into standby mode. (D WARNING When your TV is in standby mode, it is still receiving power To completely disconnect power, unplug the power cord. l? NOTE if your TV does not receive an input signal tor several minutes. it automatically goes into standby mode. Turning the TV On for the First Time The Setup Wizard menu appears the first time you turn on the TV. It will assist you to specify the menu language, country setting, Use Mode. Network Setting and Channel Installation IMPORTANT: Make sure that the antenna or cable is connected and a wired or wireless Internet connection is available. 1. Make sure that you have: installed the remote control batteries. Connected the power cord Connected to an antenna or cable TV signal 3 NOTE The customer Will be prompted to connect a Network cable in the Select Network wizard screen. 2. Connect your TV's power cord to a power outlet, then press power. The Initial Setup screen opens. 3 Please press [ENTER] to start the wizard, then press [A/V] button to select your language' English, Spanish or French, select [Next] to confirm and move to the Welcome screen. Next Country Setting Language setting l:l Espaiioi o riaiitais o The Welcome screen displays the available input devices and interfaces. 4 Select the country where you Will operate the TV. 2.Country slttlllfi Nut uni. lam Slttlrlfl Country setting M lca Privious 5 Select the local time zone according to your region. a rim. mi. lattmg Next Un ma. Time Zone setting Pacific Time Mountain Time Central Time Eastern Time Hawaii u Daylight Saving n Previous Daylight Saving: Set the Daylight Saving time for your area. 6 Select Use Mode Setting: Home Mode or Retail Mode. Home Mode is the recommended setting which oflers full functionality ofthe television um um Next Nclwork Setting ENERGY STARE qualified: Only applies for some models. It you select Retail Mode, a message appears “Are you sure to change to retail mode?" Select “OK" to continue, or select “Cancel" to change your selection. Home Mode is the recommended setting which offers full functionality or the television It you selected Retail Mode, Energy Savings are not realized.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2014:04:14 16:18:07+08:00 Create Date : 2014:04:14 16:17:54+08:00 Metadata Date : 2014:04:14 16:18:07+08:00 Creator Tool : CorelDRAW Version 9.397 Format : application/pdf Title : ES-J135202Ó¢ÎÄ Creator : X Document ID : uuid:673a631d-2d95-4863-a1a2-067ccde8fbf8 Instance ID : uuid:596ae902-9c61-4514-894e-f78d5438a0a0 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 8 Author : XEXIF Metadata provided by EXIF.tools