Hisense Electric LCDF0043 Part15 Subpart B-LED LCD TV User Manual ES J135202

Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV ES J135202

W9HLCDF0043_User Manual 1-3

Download: Hisense Electric LCDF0043 Part15 Subpart B-LED LCD TV User Manual ES J135202
Mirror Download [FCC.gov]Hisense Electric LCDF0043 Part15 Subpart B-LED LCD TV User Manual ES J135202
Document ID2273618
Application IDYl6pFFNAZZDqov6vIAbigg==
Document DescriptionW9HLCDF0043_User Manual 1-3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize382.22kB (4777716 bits)
Date Submitted2014-05-21 00:00:00
Date Available2014-05-22 00:00:00
Creation Date2014-05-20 13:28:31
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2014-05-20 13:28:38
Document TitleES-J135202Ó¢ÎÄ
Document CreatorCorelDRAW Version 9.397
Document Author: X

Audio Language - Change the default value for audio
language. (Digital channels only)
TV Speaker - Selects where to play TV audio. You can
5mm, , select 0n (default setting) to play audio through TV
- ' speakers, or select Off to play audio through the speakers
' on an external audio system.
riia Crimp—ii 4
min
min Settings
Reset Audio Settings - Resets all Audio Settings to the
factory defaults.
You can adjust:
Sound Mode - Select the Sound Mode: Standard, Speech,
Custom or Music .
Balance -Adjust the volume of the left and right speakers.
Equalizer - Soften or enhance the sound at specific
frequency points
IE! Audio Equal r
.10 DB
1an: smonisr KHz tnKH:
Auto Volume Control , Automatically adjusts volume to a
consistent level; attenuates loud passages.
Advanced Audio - Access Advanced Audio settings such
as Digital Audio Output, MTS/SAP, Audio Language, TV
Speaker.
Digital Audio Output: Send digital audio to an external
audio system. You can select PCM. RAW or Off
0 PCM: PCM outputs two channel audio regardless of
the input format
I RAW: When the data stream carries Dolby signal,
digital SPDIF outputs Dolby data stream. When the
data stream carries no Dolby signal. it transports PCM
data stream.
MTSISAP: Select the default audio stream, you can
select Mono, Stereo or SAP (Second Audio Program).
I MONO: Select this option it there is noise or static on
weak stereo broadcasts.
o STEREO: Select this option for programs broadcast in
stereo
0 SAP: Depending on the particular program being
broadcast, you can listen to a foreign-language
translation.
Bast ures
Using the TV Menu
Using the Setup Menu
eilgtli
Audio Onii
You can adjust:
Tuner Mode - Select the TV signal source. You can select
Antenna or Cable.
Auto Channel Search - Scans for channels that have
signals and stores the channels information in memory.
Digital Channels: The smnned TV program in digital signals.
Analog Channels: The scanned TV program in analog
signals.
Channel Skip - You can cancel a channel stored in memory.
Er NOTE
When you press [CH VN] (or [CH +I-]) button. your TV
skips the channel you cancelled. You can still tune to the
channel using the number buttons on the remote control.
Favorite List - Display your Favorite List. You can add or
delete channels to create your favorite list.
3 NOTE
When you press [CH VN] (or [CH +I-]) button. your TV
skips the channel you cancelled. You can still tune to the
channel using the number buttons on the remote control
Signal Strength - This menu is used to check the signal
strength of your antenna system. Usually strengths of above
75% indicates an acceptable signal for your TV to display
correct image. Each channel may vary in signal (quality
strengths and its common for broadcast strengths to change
In your area. The signal strength of the channel on the
screen is displayed.
3 NOTE
lf lower than 75% we advise to have your antenna system
checked by qualified personnel
Audio Only - Listen to the program audio only. when you
turn off the picture on your TV. (May not be accessible,
depend on your TV series and size.)
3 NOTE
Audio Only works only when the input source is TV. and
your TV is receiving a broadcast signal.
To exit audio only mode. press any button. When you exit
audio only mode. the Audio Only option is automatically
reset to err.
lilaiiu sums
nm» 5..
Power LED
lrifu
You can adjust:
Menu Settings - You can set On-screen menu system.
Language: You can select the menu's language to
English.Espanol or Francais.
Timeout: Select the display time of the menu. 107207 __,
60 seconds.
Time Setup - Set the Country. Time Zone. Daylight Savings.
Date/Time. Sleep Timer.
Country: Select your local Country.
Time Zone: Select your local time zone.
Eastern. Central. Mountain. Pacific. Alaska or Hawaii (for
USA).
Eastern. Newfoundland. Atlantic. Pacific. Mountain or
Central (for Canada)
Pacific. Mountain or Central (for Mexico).
Daylight Savings: Set the Daylight Saving time for your
area.
Date/Time: Set the current year/month/day/time.
Sleep Timer: Select the amount of time before the TV to
turns off automatically.
Parental Controls - Prevent unauthorized users. such as
children. from watching unsuitable programs.
When you first use this function. the default password is
[0000]. Once you input this password. you can set options.
You can change password In the Lock submenu
Channel Block: Block selected Channels on the TV
Program Block: Block selected Programs on the TV.
” Rating Enable: Block or unblock TV ratings.
' US. TV Ratings: Restrict TV programs by USA
Ratings.
” U.S. Movie Ratings: Restrict movies by USA Ratings.
' Canadian English/French Ratings: Restrict movies
and TV programs by Canadian Ratings.
* Open V-C : Display an advanced V-Chip ratings
table for digital channels (USA only).
c Block Unrated: Block unrated TV programs
Basic Features
Input Block - Block selected Input source on the TV.
Button LookiOn/Otf) - Block or unblock use of the
remote control.
Change Password - If you want to change the default
password, first enter the new password then enter the
same password again.
Reset Parental Control - You can reset all locks to
factory mode.
Reset to Factory Default - Restores the TV configuration
to factory settings. You will need to complete the setup
for such things as Tuner/Channel settings, Network
connection, Date/Time and other user preferences.
Following is the description of these ratings.
U.S. Movie Ratings
General audience
Parental Guidance suggested
Pareltts strongly cautioned
Restricted
No one 17 and under admitted
Adult audience only
All children
Directed to older children
General audience
Parental Guidance suggested
Parents Strongly cautioned
Mature Audience only
All at the ratings below that rating set blocked
automatically
Suggestive dialogue
Strung language
Sexual situations
Violence
Fantasy Violence
Canadian English Ratings
Children
Children 8 years and older
General Programming, suitable for all audiences
Parents Guidance
Viewers 14 years and Older
Adult Programming
Canadian French Ratings
General
a+oeneral; th recommended for young
children
Programming may not be suitable for children
under the age of 1:
Programming is not be suitable for children
under the age of 16
Programming restricted to adults
As you block rating. all rating higher than the ones you
select are blocked as well. 59. if you choose to block
the MPAA rating R, the higher ratings, NC-17 and X,
are automatically blocked too.
Caption -Adjust Closed Captioning settings.
Caption Control: Select the Closed Caption mode: CC Ofl,
CC On or CC On When Mule by press the CCD button.
Analog Closed Caption: Select an Analog Caption setting:
a CC1~CC4z Closed captioning appears in a small banner
across the bottom of the screen. C01 is usually the
“printed" version oi the audio CCZ~CC4 display content
are provided by the broadcaster.
O Text1-Text4: Closed captioning that covers hall or all of
the screen. Text1~Text4 display content are provided by
the broadcaster.
Off: To tum off the Analog Caption.
Digital Closed Caption: Select a Digital Caption setting:
Service1~Servioe6 or Off.
Digital Caption Style: Customize the look of digital Closed
Captioning.
0 Caption Style: Set the look cl Digital cc. “As
Broadcaster“ uses broadcaster's style.
0 Font Size/StyleIColorIOPacity: Select the size/style/
color/opacity level of font
Bas res
r Background Color/Opacity: Select the color/opacity Using the Network Men u
level ofthe background.
F Window ColorlOpacity: Select the color of the Window.
CEC Function: Turn the HDMI-CEO function ON or OFF. c “Emu,"
Device Auto Power on: When HDMIVCEC is turned on, my: 5“”sz
Device Auto Power on turns off HDMI CEC devices when Appllratloni
you turn off your TV.
TV Auto Power On: When HDMl-CEC is turned on and
you turn on an HDMl CEC device, TVAuto Power On turns
on your TV automatically.
Audio Receiver: When HDMIVCEC is turned on and you You can adjust:
have connected an audio receiver to your TV. turning on
Audio Receiver leis you use your TV‘s remote control to
control the volume on the audio receiver.
Configuration - Select On or Off. When 0n mode is select-
ed, the followrng options are available.
Device Root Menu: You can open an HDMI-CEC
compatible device's root menu, then use your TV’s remote
control to control the device.
Device Discovery: You can display a list of HDMI-CEC
devices that are connected to your TV.
BNOTES
- HDMI cables must be used to connect HDMI CEC-
compatiple devices to your TV.
- The connected device‘s HDMI CEC feature must be
turned on
- if you connect an HDMl device that is not HDMI CECe
compatible, all the HDMIVCEC Control features do not
work.
- Depending on the connected HDMI device, the HDMI-
CEC Control feature may not work.
VGA (Only available in VGA mode.) - Access Computer
Settings such as H.Position, V.Position, Phase, Clock and
Auto Adjust.
H.Position: Move the image right or left.
V.Position: Move the image up or down
Internet Connection: Setting the Internet Connection.
Interface: You can set up your TV so that it can access
the Internet through your local area network (LAN) with a
Ethernet or Wireless connection.
Wireless Setting: You can set up your TVs Wireless
connection.
Information: Display network configuration information.
IF' Setting: Allows you to set IP address, subnet mask,
gateway, primary and secondary DNS.
Connection Test: Press the [ENTER] button to test
network status
Auto Upgrade - Update the software using the Internet
Configure your network. For detailed procedures on using
the Network Setup, refer to the “Connecting to the Internet
ora network" instructions. If you want the Network Update
to work automatically, please select Auto Updates (On).
If you want to do the Network Update manually, please
selectAuto Updates (Off).
If the Internet connection doesn‘t operate properly, check
the Network Configuration settings and try again if the
problem persists, use the USB method below to update.
Phase:AdJust the focus of stable images. Network Upgrade - Check the process and it Will prompt
Clock: Adjust the sample frequency. you 1° upgrade the software
Auto Adjust: Detects input signal clock, phase and ENOTES
p°5m°n and adjusts TV display accordingly. - Software Update can also be performed Via downloading
Demu Mode - Displays a banner at the top of the screen the latest software to a USB memory device (www
which describes the key features of the TV. hisenserusa corn or w hisensercanada corn)
Power Indicator - Select this feature to turn off or On the u Please be careful not to disconnect the power or remove
Power LED indicator on the front panel on YOWTV- the USB drive until updates are complete. The TV wrll
Version Info - View the software version information. be turned on automatically after completing the software
update. When software is updated, video and audio
Reset Settings - Restores the TV configuration to factory
settings you made wrll return to their default settings and
settings.
your personal settings Will be deleted. We advise you to
write down your settings so that you can easily reset them
after the update.
Applications - Network application
————
l 6
Bas
DLNA: Digital Media Player (HiMedia) feature of Digital
Living Network Alliance. Press the [] buttons to set
DLNA to On
Netflix: Deactivate Netflix and display the exclusive
Net'flix ESN.
VUDU: Deactivate VUDU. (If available.)
PANDORA: Deactivate Pandora. (If available.)
My Shared Devices: Allow or deny content sharing from
other devices on your network.
3 NOTES
- Software Update can also be performed via downloading
the latest software to a USB memory device.
- Please be careful not to disconnect the power or remove
the USB drive Until updates are complete The TV will
be turned on automatically after completing the software
update. When software is updated, video and audio
settings you made will return to their default settings and
your personal settings Will be deleted. We advise you
to write down your settings so that you can easily reset
them after the update
(:nnti’luration
Aim quradn
Fir
Connecting to a Wired Network
Network Setup (Auto)
Use the Automatic Network Setup to connect the TV to a
network that supports DHCP. To set up your TV's network
connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
3. On the Network screen, select Configuration and press
[ENTER] button to enter the submenu
Set Internet Connection to On and Interface to Ethernet.
Select IP Setting and press [ENTER] button to enter it.
Set Address Type to Auto.
Auto acquires and enters the necessary connection
values automatically.
8. If the connection values are not automatically entered,
please check your modem and router manuals for
directions to enable automatic IF| addressing by DHCP
or, follow the steps listed in the following section,
Network Setup (Manual), to manually configure the
network connection
NF’WP
res
Network Setup (Manual)
Use the Manual Network Setup when connecting yourTV to
a network that requires a Static IP address.
Getting the Network Connection Values
To get the network connection values on most windows
computers, follow these steps
1 Right click the Network icon in the bottom right of the
screen.
2 ln the pop-up menu that appears. click Status.
On the dialog that appears. click the Support tab.
4 On the Support tab, click the Details button. The network
connection values are displayed.
How to manually setup the network connection
To set up your TV's network connection manually, follow
these steps:
‘l Follow Steps 1 through 5 in the “How to set up
automatically" procedure.
2 SetAddress Type to Manual.
3 Press [A/V] button to select lPAddress and press [41>]
button to move the cursor to the entry field Then press
0~9 buttons to enter the numbers.
4 Press [MENU] button to exit IF‘Address and press [A/V]
button to select the next options to enter the numbers
5 When done. press [MENU] button to return to the
preVious menu.
6 Select Connection Test to check the internet connectivity.
Wireless Setting
How to set up
1 Turn on your TV, press Menu and select Settings Network.
2 On the Network screen. select Configuration and press
the [ENTER] button to enter the submenu.
3 Set Internet Connection to On and Interface to Wireless.
4 Select Wireless Setting and press the [ENTER] button
you can select: Scan / Manual/Auto.
5 lf you select Scan, a screen will appear listing all of the
Wireless networks Within range of the TV. Use the [A/V]
button to select the wireless network with your router SSlD
and press the [ENTER] to confirm. Proceed to Step 7.
6 if you select Manual, a screen Will appear prompting
you to enter the SSlD of your wireless network Press
[ENTER] and an onrscreen keyboard will pop up Enter
the SSlD and select 0K Press [ENTER] and a screen
Will appear prompting you select the security mode [or
your wireless network Use the [A/V] button to select
the proper security mode and press [ENTER] to confirm
lt you selected None for the security mode, proceed to
step 9
7 A screen Will appear prompting you to enter the password
for the selected security mode Press [ENTER] and an
on-screen keyboard Will pop up. Enter the password and
select 0K. Press [ENTER] to confirm. Proceed to Step 9.
on
l7
8. If you select Auto. a screen will appear prompting you
to select PIN (personal identification number) or F'BC
(push button configuration) setup. Choose the method
supponed by your wireless access point.
If you choose PIN. an identification number will
appear on the screen for you to enter into the access
point. After entering the PIN. press the [b] button. If
the PIN is in use by another device. select [REFRESH]
to obtain a new PIN and enter it into the access point.
After entering the PIN. press the [b] button.
If you choose PBC. a screen will appear prompting
to press [>1 button, After pressing the [>] button you
have two minutes to locate and press the Push Button
on your access point to connect to the TV.
9. Press the [MENU] button to return to the previous menu.
10. Select Connection Test to check the lntemet connectivity.
DLNA Setting
You can use DLNA Certified computers. TVs. and other
devices to play or transfer the videos. pictures. and music
stored on your phone . tablet or other devices connected to
your network. For more about DLNA (Digital Living Network
Alliance). visit www.dlna.org. Make sure your phone and TV
are both connected to the same Wi—Fi network.
I Set DLNAto On:
1. On the Network screen. select Applications and press
the [ENTER] button to enter the submenu.
2. Press the [] buttons to set DLNA to On.
Media Share Settings in Computer
If your computer does not support DLNA, you may install
software that suppons DLNA such as TVersity or Windows
Media Player (Version V11 or higher). We recommend
Windows Media Player as the installation and setup is
easier.
1. 0n the PC taskbar. click Start
2. Point to All Programs. and then click Windows Media
Player.
3. Click “Library" tab and then “Add to Library..." as shown in
the following screen shot.
4. In the Add To Library dialog box. click “Add" as shown in
the following screen shot.
Advanced Features
Addiatlmavy ' Setting to Share Files
smmmwmflmiammmmmmwmix
Maw-mm eu-w - u - w .. -
1. Click Library and move the cursor to select MedIa
s-iaaunmvmmm
__ Sharing..." as shown in the following screen shot.
ems-u i
0m.mmw,.m,mmm, 2. In the Media Sharing dialog box, select the Share my
media check box and click “OK".
Mull- Slim um
l Mom-am... i»-
nwwusic mm m
rwocwmxua SdlmwfismhthyDoa-IemWych Re row
,, H
5, mm,m,mmmmm
M mum
Wm
gm
lwhummmmw
nwmmmumim
3‘ After turnnig on media sharing, you need to select the
devices that should have access to your Player library, An
equipment icon will appear on the white area if the DLNA
Settings have been correctly set. Select a device and
5_ Select a folder and click “OK". then click “Allow" as shown in the lollowing screen shot
Malia 5mm
Add Folder
§ smmm,wmmmm
Select A fold”:
ID lily Bowman
9 My Computer
'9 in Network Places
4‘ Then the TV can access to the shared files in the
computer.
For information about how to customize what media you
share with the device, see "Change seitings for sharing
media" in Windows Media Player Help.
Mcdiailmimg
5, smnmvm,mmmwm
- A m
5mm
limwn-fiu
um
Adva res
Network Function l-Operational buttons
:' NOTICE
To access Internet streaming Video sewices. please note
the l‘ollow requirements.
. Use 01 Internet services requires a working broadband
Internet connection (I to 2 Mbps tor SD video. 2.25 to 4.5
Mbps for HD video and 4.5 to 9 Mbps for 1080p and 3D
video).
. Internet-based services are not provided by Hisense,
may change or be discontinued at any time and may be
subject to restrictions imposed by your Internet service
provider. The quality, functionality, or availability of such
services may be affected by the capacity of your Internet
connection. Use of video-on-demand and other Internet
services may require the creation of a separate account
through a computer with internet access.
. Certain services may not be available for this TV model.
. Video-on-demand and other Internet services may require
payment of one-time and/or recurring charges.
. You are solely responsible for any charges incurred as a
result of using Internetrbased content, including, without
limitation, communications charges for the provision at
Internet or network services and any charges incurred
for thirdrparty Internet content services, such as video on
demand or subscription services All thirdrpany serwces
are provided in accordance with whatever terms and
conditions are established between such thirdeparty
prcViders and you
.HISENSE MAKES NO REPRESENTATIONS OR
WARRANTIES ABOUT THE CONTENT. AVAILABILITY
OR FUNCTIONALITY OF THE VUDU SERVICE OR
A M UTE A
iv L HiMedia CH
v TV v
HiSmart Vvv ruiie
Exir
irruiii
NIIIIIII
Description
Press to launch VUDU Movies App directly.
(Not available in Canada.)
Open the HiSmart Hub wrth links to various
Internet Services
Open the digital multimedia player.
run 1th
Press to launch YouTube App directly
Open the menu.
OTHER iNTERNET DELIVERED THIRD-PARTY Em Ck’se‘he mam“
SERVICES AND DOES NOT WARRANT THAT ANY pm Rem,” to the prevmus menu
OF THEM WILL BE UNINTERRUPTED. ERROR FREE
OR SATISFACTORY. ANY IMPLIED WARRANTY, “7“,, NaVigate Up/Down/Left/Right or adyust
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FORA PARTICULAR PURPOSE OF ANY THIRD PARTY
CONTENT OR SERVICE, IS EXPRESSLY EXCLUDED
AND DISCLAIMED. UNDER NO CIRCUMSTANCES
WILL HISENSE BE LIABLE IN CONTRACT. TORT OR
UNDER ANY OTHER THEORY FOR ANY DAMAGES
ARISING OUT OF OR IN CONNECTION WITH YOUR
USE OF ANY CONTENT OR SERVICE PROVIDED
BY ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
OSD settings.
Confirm selections.
Press to launch NETFLIX App directly.
Display the TrickPIay screen and fast
reverses playback.
Display the TrickPIay screen and fast
lorwards playback.
Play the previous one.
Play the next one.
Pause playback. Press the button to return
to playback.
Stop playback and display the file title
screen.
vanc eatures
Using the Home Menu
i Press the [HiSmart] button to display Home menu.
2 Press [] button select the movie and press enter to
confirm.
Er NOTE
For U S. only.
Apps
:- Brief introduction
Apps contains all pre-loaded applications of the TV.
:- Operation introduction
Press the HIV/41>] button select the app and press
[ENTER] to confirm.
I? NOTE
in Canada and Mexico. VUDU Movies/ VUDU Apps!
Pandora may not all available
AccuWeather
:- Brief introduction
This application provides local and international weather
torecasts, world class weather radar plus up-to-date weather
reports and current conditions.
3' Operation instructions
’O‘OO‘O
1 Press the [] buttons to move the cursor to select
service items in AccuWealher screen and the [ENTER]
button to confirm.
2 To use other features, press the button shown in the help
bar
3 Press the [RETURN] button to return to the upper menu,
or the [EXIT] button to close the App.
YouTube
:- Brief introduction
The YouTube app allows you to watch original videos, music
videos, feature length movies. previews and trailers on your
TV screen Search or browse recommendations with the TV
remote
:- Operation instructions
c To activate your YouTube account for your TV:
Select "Sign in" and "Settings" from the toolbar on the
lefl side of the application. then go to www.youtube.com/
activate and enter the code you see on the TV screen.
While you enter the code the screen should remain
open. otherwise the code will no longer be valid. Once
completed your account will be activated and you Will be
signed in.
P To control YouTube from your tablet or smartphone:
Please first check it your mobile device supports YouTube
TV and use the same network connection. To pair your
device to the YouTube screen, you will be prompted
to go to www.youtube.com/pair on your mobile device.
The screen guide to "Pair with TV" will appear. Enter the
pairing code or enter the value of the scanned QR code
on the SmartTV. While you enter the code the screen
should remain open, otherWise the code will no longer
be valid. Select a name for your device then click “Add
TV". Once complete, the YouTube app Will show that your
mobile device has been paired. You can now select a
video to watch on YouTube TV using your mobile device
21
vanc \ eatures
VUDU Movies
:- Brief introduction
VUDU is an onrdemand service that offers highedehnition
movies via the web.
To enjoy movies, please register and log in to your account.
:- Operation instructions
To access Vudu HD Movies: Vou can access the VUDU HD
Movies by the following method
1. Press the [HiSmart] button to display home menu.
2. Press [41>] button to select the VUDU HD Movies icon
and press [ENTER] to enter it, or press [VUDU] button to
enterdirectly
3. Select the Sign Up Now icon on the VUDU HD Movies
interface, and press [ENTER] to enter.
4. Enter your email address to start your VUDU experience.
(Refer to “How to Input the EmailAddress" on page 23.")
5 Press [LIV/41>] button to move the cursor to select
service items in the VUDU HD Movies home page, and
press [ENTER] button to confirm.
6. While watching a movie. press [ENTER] button to display/
exit the tool bar. press [] button to select the function
icon, and press [ENTER] button to confirm.
7 Press [RETURN] button to return the upper menu, or
press [EXIT] button to close the menu
0 Tool Bar
iiiiiii
0 00606 0
0 Press [ENTER] button to enter and press [4W] button to
select the chapter
9 Stop playback.
0 Fast backward. Press [ENTER] to select the backward
speed. You can press [44] button to achieve the function.
OPIay/Pause You can press [VII] button to play/pause
directly when there is no control bar on the screen
9 Fast forward. Press [ENTER] button to select the (onward
speed. You can press [VV] button to achieve the function.
9 Progress bar. The progress bar when playing.
0 Press [ENTER] button to select the movies duality HDX, HD
or SD.
:- How to Input the Email Address
1. Press [A/V/4/D] button to move the cursor to the
address bar and press [ENTER] button to confirm.
2 Press [ENTER] button to display the keyboard.
There are some shortcuts on the bottom of the keyboard
so that you can input part of the address often used
directly.
Other keys are used as the keyboard of your computer.
Enter email address
Enter crriail address to begin cn‘oylng vuoui
Enter email address
3 Press [A/V/] button to move the cursor to the
characters you want to select and then press [ENTER]
button to confirm.
If you want to delete one character, move the cursor to
Back key< X and press [ENTER] button to confirm.
4 Move the cursor to Done key and press [ENTER] button
to Confirm ii you have completed the address input Then
the new address will appear on the address bar
VUDU Apps
:- Brief introduction
The applications platform for connected TVs
I VUDU Apps provides customers With access to a wide
range of lnternet services and applications including
streaming video, music on demand, photo browsing.
social networking and more.
I VUDU Apps supports the development of responsive
apps designed specifically for use on home HD
televisions.
I VUDU Apps uses a unique, cloudrbased architecture
optimized for consumer electronics devices, including
delivering the latest applications to consumers without
the need for software downloads or frequent firmware
updates.
:- Operation instructions
You can access the VUDU Apps by the followtng methods:
1 Press the [HiSmart] button to display home menu.
2 Press [] button to select the VUDU Apps icon and
press [ENTER] to enter it.
3 Press HIV/AN] button to select the Widget you want to
access. and press [ENTER] to enter it.
4 You can press [RETURN] to return the upper menu or
press [EXIT] button to close the Widgets display

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2014:05:20 13:28:38+08:00
Create Date                     : 2014:05:20 13:28:31+08:00
Metadata Date                   : 2014:05:20 13:28:38+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Title                           : ES-J135202Ó¢ÎÄ
Creator                         : X
Document ID                     : uuid:6ffcefa8-7be9-4a85-8162-62406f24a159
Instance ID                     : uuid:72868e64-3769-4e9c-b745-8a49b8040a63
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 10
Author                          : X
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W9HLCDF0043

Navigation menu