Hisense Electric LCDF0067 Part15 Subpart B-LED LCD TV User Manual W9HLCDF0067 3

Download:
Mirror Download [FCC.gov]
Document ID	2911233
Application ID	7Jn88bys3X/hk3y/e3zcRg==
Document Description	W9HLCDF0067_User Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	274.63kB (3432850 bits)
Date Submitted	2016-02-25 00:00:00
Date Available	2016-02-26 00:00:00
Creation Date	2016-01-11 17:11:32
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2016-01-11 17:11:39
Document Title	W9HLCDF0067_User Manual 3
Document Creator	Adobe InDesign CS6 (Macintosh)

ES-G154912-1
Models LC-43N7000U
LC-50N7000U
LC-55N7000U
LC-60N7000U
4K Smart TV
Quick Start Guide
Help SHARP improve the environment by reducing paper waste.
For detailed instructions and feature descriptions, access the full User Manual online.
Š 2015, 2016 Hisense Company Ltd. All Rights Reserved.
All material in this Quick Start Guide is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US and
International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any
manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd., is a violation of Hisense Company Ltd.
rights under the aforementioned laws.
No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or
otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd.
Requests for permission to store, reproduce, transmit or distribute materials may be made in writing to the following address:
USA:
Hisense USA Corporation
PO Box 3289
Suwanee, GA 30024
CANADA: Hisense Canada Co., Ltd,
405 Britannia Rd E., Suite 11
Mississauga, Ontario,L4Z 3E6
MEXICO: Hisense Mexico S de RL de CV
Boulevard Miguel de Cervantes Saavedra No. 301, Torre Norte, Piso 2,
Colonia AmpliaciĂłn Granada, C.P. 11520, en MĂŠxico Distrito Federal.
“Sharp™”, “Aquos™”, “Quattron™” and any and all other Sharp product names, logo’s, slogans or marks are registered trademarks
owned exclusively by Sharp Corporation.
"Hisense™", and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks and intellectual property
rights of Hisense Company Ltd. and its subsidiaries.
This product is sold to you under one or more license agreements between Sharp Corporation and Hisense International (Hong Kong)
America Investment Co. Ltd. All other trademarks are the property of their respective holders.
4K Smart TV: An unforgettable entertainment experience
Smart LED TV with Popular Features
Multiple Connection Methods
• Ultra-fast access to launch Netflix®
• Built-in wireless connection
• Numerous built-in social media, gaming and movie apps
• 3 USB Connectors (2 USB 2.0 Connectors and 1 USB 3.0
Connector)
• Thousands of movie titles and streaming content to view
• 4K Media Player and Receiver
• 4 HDMI Connectors (2 HDMI 1.4 Connectors and 2 HDMI 2.0
Connectors)
• App Store and Web Browser
• 1 LAN (Ethernet) port
• Many other cool features
High-Quality Picture and Sound
Easy Setup Menu and Simple Design
• Vibrant contrast and brightness to display images
accurately
• Short and easy-to-follow first-time setup menu
• dbx-tv® Award-winning sound
• 4K technology that supports 4K online streaming, 4K USB
content, HDMI 2.0 devices and much more to maximize
your entertainment experience
• AquoMotion TM
• Descriptive features to help make your selections
• With a simple user interface (UI) design to navigate
Register Your TV!
Congratulations on the purchase of your new SHARP 4K Smart TV! This Quick Start Guide will walk you through a few
easy steps to set up your TV. For detailed instructions, access the User Manual on the support pages listed below.
Because we value your business, we want to keep you in the know of 'all things SHARP'. Using your mobile phone, scan the Registration
page QR code to register your TV. Depending on the make and model of your phone, you may need to download a QR code scanning
app.
Country
U.S.A
CANADA
MEXICO
Customer Care Center
• Phone: 1-888-935-8880
• Hours of Operation:
Monday - Friday: 9 AM to 9 PM EST
Saturday - Sunday: 9 AM to 6 PM EST
• Service Email: support@sharptvusa.com
SHARP Support Page
http:// www.sharptvusa.com
/support
• Phone: 1-855-271-6271
• Hours of Operation:
Monday - Friday: 8 AM to 8 PM EST
• Service Email: Canadasupport@sharp-canada.ca
• Phone: 01-800-999-7277
• Hours of Operation: Monday-Friday 09:00-18:00
• Service Email: servicio@SHARPTV.com.mx
http://www.sharp-canada.
ca/support/
http://www.SHARPTV.com.
mx/support/
REGISTER YOUR TV
www.sharptvusa.com/
support/productreg.asp
No need to register
http://www.SHARPTV.
com.mx/support/product
Reg.asp
Disclaimer: This Quick Start Guide is intended as a general guideline to help you set up your SHARP TV. Images
throughout this document are for illustrative purposes only and may differ from the actual product.
PACKAGED CONTENTS
Your package in which you purchased your new TV contains the following items:
● TV
● Quick Start Guide (this document)
● 2 base stands
● 2 column bases（43"）
● 8 screws (M4×8)(43")
● 4 screws (M4×10)(50"/55")
● 4 screws (M4×12)(60")
● Remote Control
● 1 set of AAA batteries
● Power Cord
● Important Safety Information and Warranty Card
IMPORTANT:
To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box.
¡ Please check foam for accessories before discarding.
¡ Veuillez vÊrifier la mousse pour qu'il n'y ait pas d'accessoires avant de la jeter.
¡ Antes de desechar la espuma, asegúrese de retirar todos los accesorios.
Required tools and devices
●
●
●
●
Wireless router (not included) for Internet connectivity
Phillips screwdriver (not included) to secure the TV stand
HDMI and other types of cables (not included) to connect external devices to the TV
Wall mount bracket (not included) if you prefer to mount the TV to the wall
BUTTONS AND PORTS ON THE TV
Back View of the TV (43"/50"/55")
0.5A(MAX)
0.5A(MAX) DC 5V
DC 5V
SERVICE
USB 2
USB 1
ANT/CABLE
TV Side View
HDMI 4(4K@60Hz)
AV IN
VIDEO
PB
PR
COMPONENT IN
1A(MAX)
DIGITAL
AUDIO OUT
DC 5V
HDMI 3(4K@60Hz)
LAN
USB 3
TV Bottom View
HDMI 2(4K@30Hz) HDMI 1(4K@30Hz)
AUDIO
OUT
MHL
(DC
5V
900mA)
ARC
OK
SERVICE
TV Side View
0.5A(MAX)
DC 5V
0.5A(MAX)
AUDIO OUT
COMPONENT IN
PB
LAN
AV IN
PR
VIDEO
MHL(DC 5V 900mA)
ARC
1A(MAX)
DC 5V
USB 2
AUDIO
OUT
USB 3
DC 5V
TV Bottom View
DIGITAL
USB 1(3.0) HDMI 4(4K@60Hz)
HDMI 3(4K@60Hz) HDMI 2(4K@30Hz)
HDMI 1(4K@30Hz)
ANT/CABLE
Back View of the TV (60")
STEP 1. Attach the TV Stand or Wall Mount Bracket
Attach the TV Stand
Follow the illustrations and instructions below to complete the installation steps:
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the TV or scratches to the screen.
2. Use the 2 screws to attach the BASE to the SUPPORT POST that will form the STAND.(43")
3. Align the STAND with the holes on the bottom of the TV and secure it with the 2 screws.
43"：
43"/50"/55"/60"：
M4×8(43")
M4×10(50"/55")
M4×12(60")
SUPPORT POST
Base
0h
STAND
Attach the Wall Mount Bracket (not included)
• To prevent internal damage to the TV and ensure it is
mounted securely, be sure to use fixing screws (not
provided) that are 9.5 - 11.5 mm in length when measured
from the attaching surface of the mounting hook.
Before you begin the third-party manufacturer instructions, be
sure to do the following things:
1.Place the TV face down on a clean, safe and cushioned surface.
2.Remove the TV stand if you already attached it.
3.Place the spacers (not included) in the corresponding bracket
holes.
9.5 - 11.5 mm
Screw
Spacer
Rear cover of the TV
Screw
(not provided)
Wall mount bracket
Wall mount hole pattern
VESA (mm)
200 × 200(43"/50"/55")
400 × 400(60")
Wall mount screw size (mm)
M6
Follow instructions provided with the Wall mount bracket.
● To complete the installation, please contact the wall-mount
manufacturer or the retailer from which you purchased the TV.
● The selected screws are 9.5 - 11.5 mm in length when
measured from the attaching surface of the rear cover. The
diameter and length of the screws differ depending on the
Wallmount bracket model.
Spacer
(not provided)
NOTE: The diameter and length of the screws differ
depending on the wall mount bracket model.
Bracket
(not provided)
CAUTION:
• When you attach the mount, be sure to use the spacers
(provided by the third-party manufacturer) between the TV
and the bracket.
STEP 2. Connect devices to your TV
Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect
the quality of the picture image and color.
TV label
Port
Cable
External Equipment
Brief Description
VHF/UHF Antenna
ANT/CABLE
Connect an outdoor VHF/UHF antenna.
ANT OUT
Antenna
This 4K TV has two different software versions
of HDMI ports to connect HDMI-enabled
devices. The two high-powered HDMI version
2.0(HDMI 3, HDMI 4) inputs enable you to
connect 4K Ultra-HD external devices that
require more bandwidth to transmit to the TV
screen. For example, if you have an X-box or
Blu-ray player that supports the 2.0 standard.
The two HDMI version 1.4 inputs are great for
any of your external devices that support a
HDMI
VCR
PB
COMPONENT IN
PR
AV IN
VIDEO
DVD Player/Recorder
Green
Blue
Video
Camera
Set-top Box
Red
Satellite
antenna
cable
Connect a component video cable and left-right
audio cables from an external AV device.
Satellite Receiver
White
Red
Connect a composite video cable and left-right
audio cables from an external AV device.
Yellow
White
TV label
AV IN
Port
Cable
External Equipment
Brief Description
Red
Connect an optical cable from an external
digital audio system.
DIGITAL AUDIO OUT
Speaker
Connect headphones to hear audio from the
TV.
AUDIO OUT
White
Connect an audio adapter (not provided) from
an external analog audio system.
Red
Speaker
Connect a USB 3.0 device to transfer photos,
music and movies to your TV at a rate that's 10
times faster than the USB 2.0 port
NOTE: You can still plug a USB 2.0 device into
a USB 3.0 port; however, the rate of speed will
not be as fast. USB 3.0 devices are also backwards compatible with USB 2.0 ports.
USB
LAN
SERVICE
LAN
Connect an Ethernet cable to access a network
or the Internet. The TV also has a wireless
connectivity feature.
This port is not available for you to connect an external device. It can only be used by our factory for testing
purposes.
STEP 3. Establish a network connection
1.Press the
button on the remote control and then press > to enter the Settings menu.
2.Select Network → Network Configuration.
TV JACK
LAN
IP Sharer (Router)
External Modem
(with DHCP server)
(ADSL / VDSL / Cable TV)
LAN Cable
LAN Cable
Modem Cable
Establish a wired network connection
Automatically obtain an IP address
1.Select Ethernet. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default option of IP Setting Mode is DHCP.
2.If the connection fails then "Disconnected" will display for the Ethernet status. Retry or select Manual to input the information again.
Manually enter the IP address
1.Select Manual.
2.Enter the IP Address, Subnet Mask, Default Gateway, Preferred DNS and Alternative DNS in the menu. Next, select Connect.
10
Establish a wireless network connection
Wireless router with DHCP
Wireless LAN Adapter
built-in TV set
LAN Cable
The TV can directly receive network signals via wireless router
1.Select Wireless. The list of networks will be displayed in Available Networks automatically.
2.Select a wireless network from the list, input password and select Connect.
3.If the network connection does not appear in the list, select
to refresh the list or select + to manually enter SSID and Security mode
selection, select Add.
Close the network connection
Select Off. The network connection will close.
11
Buttons on your TV remote
Infrared transmitter
Power on / off
INPUT
Change TV input source
Enter Channels / input numbers
Turn Closed Caption On/Off
Dash button
Select a digital sub-channel
Special function buttons
CC
All Apps
The 'Gear' button for the Quick setup menu
D-pad (up/down/left/right
navigation buttons)
Return to the previous place in the menu or app
Volume (up/down)
Confirmation button
OK
BACK
EXIT
VOL
CH
Exit the application
Display the Home screen
Live TV
Channel (up/down)
Mute and restore sound
Media content control function buttons
Adjust Sleep timer setting
SLEEP
APP
APP
APP
APP
12
Quick access buttons to apps
STEP 4. Begin using your remote
• Do not continue using the remote if it gets warm or hot.
Call our Support Center immediately on the SHARP
support website.
1. Slide the back cover to open the battery compartment of the remote
control
Remote Control Range Information
Gently push and slide
Insert the batteries
● The remote control can work at a distance of up to 26 feet in
front of the TV set.
● It can work at a 30 degree horizontal or vertical angle.
Gently push and slide
2. Insert two AAA size batteries. Make sure to match the (+) and (-)
ends of the batteries with the (+) and ( - ) ends indicated in the
battery compartment.
3. Replace the battery compartment cover.
Program Your Universal Cable or Satellite
Remote Control to Operate Your New SHARP
Television (only for USA)
If you would like to program your other household remote
Important Information about the remote and batteries: controls to your new SHARP television,please refer to the User
• Discard batteries in a designated disposal area. Do not throw
them into a fire.
• Remove old batteries immediately to prevent them from leaking
into the battery compartment.
• If you do not intend to use the remote control for a long time,
then remove the batteries.
• Battery chemicals can cause a rash. If the batteries leak, clean
the battery compartment with a cloth. If chemicals touch your
skin then wash it immediately.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(NiCd, NiMH, etc.) batteries.
13
Manual supplied by your Cable or Satellite provider. It should
include instructions on how to program their remote to your
television.
A list of SHARP codes for the most common Cable and Satellite
providers are listed below. Use the SHARP code that is
associated with your Cable or Satellite provider (if applicable).
DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710,
11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641,
11963, 12002, 12183
Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456,
0748, 1463, 0463, 10463
Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660,
STEP 5. Power on the TV
10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963,
12002
Plug the power cord into a wall outlet.
Cox Communications......0178, 10178, 1326, 1463
Dish Network......505, 627, 538, 720, 659
If the SHARP code associated with your Cable or Satellite provider
is not listed, does not work or you cannot locate the instructions to
program your remote, call your local Cable or Satellite provider's
customer service center.
If your Cable or Satellite provider does not have a SHARP code
available, please contact us at one of the phone numbers on Page 2.
Using Your Cable Set-top Box or Satellite Receiver
Remote as a ‘Universal’ Remote
If you prefer to use your Cable Set-top Box or Satellite Receiver
Remote as a ‘Universal Remote’, then visit the Support page to view
a list of the codes.
14
Power Cord
Wall Outlet
STEP 6. Complete the first-time setup menu
Press the Power button
on the remote to turn on the TV. A
splash screen that shows the SHARP logo appears. Next, the
First-Time Setup Menu begins by prompting you to choose your
Language, Country, and Time Zone.
After the splash screen that shows the SHARP logo appears, begin
the first-time setup menu.
LANGUAGE AND LOCATION
Language
English
Language
Country
Terms
United States
Mode
Time Zone
Network
Select
Input
Done
Screen
Task
LANGUAGE
AND
LOCATION
• Using the D-pad arrows of your remote, choose
your Language, Country and Time Zone. Next,
navigate to the Forward arrow and press OK.
TERMS OF
SERVICE
• Press OK to select Accept all. When you’re done
navigate to the Forward arrow and press OK.
TV USAGE
MODE
• Select Home (which appears by default).
Next,navigate to the Forward arrow and press OK.
• Note: ‘Store mode’ should only be selected by
Retailers who plan to demonstrate the TV.
NETWORK
• If your TV does not automatically detect an Ethernet
CONNECTION connection, then select WiFi. When you’re done,
select your network from the list that displays and
move to the next screen.
15
Screen
Task
LIVE TV
INPUT
SOURCE
Select how you receive your TV channels. Choose
from one of the following sources below and then move
to the next screen.
• TV
• AV
• COMPONENT
• HDMI
TIP: You only need to scan for channels if your TV is
connected to an Antenna.
STEP 7. Begin to enjoy your TV
Your Smart TV is easy to use and brag-worthy!
Now that you’ve completed the first-time setup menu, the Home
screen is your starting point for navigating the TV. Gone are
the days where your TV only provides one way for you to be
entertained. This showpiece provides you the convenience
of watching a program on a live channel, accessing Video on
Demand to watch a movie and many other entertainment options.
CONGRATULATIONS! Your TV is now ready to use.
Press the OK confirmation button on your remote if you are fine
with the selections that appear on the screen. Otherwise, navigate
to the back arrow on the screen to change your selection.
Using your remote, press the Home button to begin enjoying your
TV.
Disclaimer: Subscriptions or other payments may be required to access content through some applications. Some or all of the included
or downloaded application services in this Sharp, Aquos or Quattron device may not function depending on the Internet connection,
local limitations of included applications or other reasons outside of the Licensor's or Manufacturers control. ALL LICENSORS AND THE
MANUFACTURER EXPRESSLY DISCLAIM RESPONSIBILITY FOR ANY APPLICATION SERVICE FROM FUNCTIONING AT ANY
TIME, FOR CONTENT IN ANY APPLICATION SERVICE, FOR DISRUPTIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS,
WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. By purchasing this device, you accept such Disclaimer without any claim on any Licensor and/or the
Manufacturer at any time and in any territory.
16
PRODUCT SPECIFICATIONS
Disclaimer: All product, product specifications, and data are subject to change without notice to improve reliability, function, design or
otherwise.
Model Name
Dimension
(W × H × D)
Weight
LC-43N7000U
LC-50N7000U
LC-55N7000U
LC-60N7000U
Without Stand
37.9 × 22.6 × 2.4 inches
(963 × 573 × 60 mm)
44.4 × 25.7 × 2.5 inches
(1127 × 654 × 63 mm)
49 × 28.3 × 2.5 inches
(1244 × 720 × 64 mm)
53.1 × 30.7 × 2.5 inches
(1349 × 779 × 64 mm)
With Stand
37.9 × 23.9 × 7.2 inches
(963 × 607 × 183 mm)
44.4 × 27.8 × 9.2 inches
(1127 × 706 × 234 mm)
49 × 30.4 × 9.2 inches
(1244 × 773 × 234 mm)
53.1 × 32.8 × 9.9 inches
(1349 × 832 × 252 mm)
Without Stand
27.3 lbs (12 kg)
37.7 (17.1 kg)
47 lbs (21.3 kg)
51.4 lbs (23.3 kg)
With Stand
28.2 lbs (13 kg)
38.6 (17.5 kg)
47.8 lbs (21.7 kg)
52.5 lbs (23.8 kg)
49.5 inches
54.6 inches
59.5 inches
Active Screen Size (Diagonal) 42.5 inches
Screen Resolution
3840 × 2160
Audio Power
7W+7W
10 W + 10 W
10 W + 10 W
10 W + 10 W
Power consumption
120W
150W
175W
180W
Power Supply
120 V ~ 60 Hz
Performance and Compliance
HDMI, VESA, Dolby Digital Plus, FCC, dbx-tvÂŽ Total Technology
Certifications
Picture Quality
HDR Processing, AquoMotion (only 50"/55"/60") and Revelation Upscaler
Audio technologies
Supports dolby digital and dbx-tvÂŽ
Connectivity
Built-in Wireless feature (2x2 dual band)
Key Apps
Netflix, Vudu, YouTube, Amazon Instant Video, Pandora and Opera App (Some apps only for USA)
Ports
4 HDMI ports, 3 USB ports, LAN port for Ethernet, 1 Digital Audio Output, 1 RF Input, 1 Earphone Audio Output, 1 RCA
Composite Video Input , 1 left/right Audio Input for Composite, 1 RCA Component Video Input
Other features
Smart TV, Dynamic contrast Picture, VESA standard wall mount support, Web browser, Parental Control and Closed
Caption
17
QUICK PROBLEM-SOLVING TIPS
When you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. If
the problem is still not resolved, then contact us at one of the phone numbers on Page 2.
ISSUES
POSSIBLE SOLUTIONS
• Check if the power cord is plugged into a powered AC outlet.
No sound or picture
Power button on the remote control to activate the unit from 'Standby' mode.
• Press the
• Check to see if the LED light is on or not. If it is, then the TV is receiving power.
I have connected an external
source to my TV and I get no
picture and/or sound.
• Check for the correct output connection on the external source and for the correct input connection on the TV.
• Make sure you have made the correct selection for the input mode for the incoming signal.
When I turn on my TV, there is a
delay for a few seconds before the
picture appears. Is this normal?
• Yes, this is normal. The TV is initializing and searching for previous setting information.
The picture is normal but there is
no sound
• Check the volume settings.
• Check if 'Mute' mode is set to On.
Sound but no picture or black and
white picture
• If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds.
• Check that the Color is set to 50 or higher.
• Try different TV channels.
The sound and/or picture is
distorted or appears wavy
• An electric appliance may be affecting the TV. Turn off any appliances that are nearby and move it farther away
from the TV.
• Insert the power plug of the TV set into another power outlet.
The sound and picture is blurry or
cuts out
• If using an external antenna, check the direction, position and connection of the antenna.
• Adjust the direction of your antenna or reset or fine tune the channel.
A horizontal or vertical stripe
appears on the picture and/or the
picture is shaking
• Check if there is an appliance or electric tool nearby that is causing interference.
18
The plastic cabinet makes a
"clicking" type of sound
• The 'click' sound can occur when the temperature of the television changes. This change causes the television
cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.
The remote control does not work
• Confirm that TV still has power and is operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.
Need more help?
Additional help is available online at support links on Page 2. You will find answers to frequently asked questions,
downloadable firmware and more.
19
Certification and Compliance
The Wi-Fi Module complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This device should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
FCC Notice
This device has been tested and found to comply with the limits
for a Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can
be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the device and receiver.
● Connect the device into an outlet on a circuit different from that
to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for
help.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the
user’s authority to operate the equipment.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing LLC in the United States and other countries.
This TV includes dbx-tv Technology. dbx-tv is a trademark
or registered trademark of THAT Corporation.
Š2015. All rights reserved. SHARP and the SHARP logo are registered
trademarks of SHARP. Other brand and product names are registered
trademarks of their respective owners.
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2016:01:11 17:11:32+08:00
Metadata Date                   : 2016:01:11 17:11:39+08:00
Modify Date                     : 2016:01:11 17:11:39+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:35c78f39-8076-c64f-b2a3-9891952c71ba
Original Document ID            : xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A
Document ID                     : xmp.id:FFA240A545206811822A80937AEF3BC1
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:FEA240A545206811822A80937AEF3BC1
Derived From Document ID        : xmp.did:6828B2BC352068118083CCDE40C37E08
Derived From Original Document ID: xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2016:01:11 17:11:32+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 23
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools