Hisense Electric LCDF0105 LED LCD TV User Manual TempConfidential W9HLCDF0105 2

Download:
Mirror Download [FCC.gov]
Document ID	3291138
Application ID	yN0sVBlaNnx3yGmm3+DpPg==
Document Description	TempConfidential_W9HLCDF0105_User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	240.18kB (3002297 bits)
Date Submitted	2017-02-22 00:00:00
Date Available	2017-08-22 00:00:00
Creation Date	2017-02-07 08:55:34
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-02-21 11:41:05
Document Title	TempConfidential_W9HLCDF0105_User Manual 2
Document Creator	Adobe InDesign CS6 (Macintosh)

Buttons on your TV remote
Power on / on
Inrrared tmnsrnitter
cnange rv input source
Entercnanneis I input numbers 7
7 QUICK access buttons tn
PicTURE/souND/ASPECTISLEEP
Dash button
Tum Closed Caphon Uri/0"
Seiect a digital subschannei
Live TV
Mute and restore sound
Voiume (up/down)
cnannei (up/down)
7 Dispiay tne Home screen
Tne button Inrttie Quick setup menu
Dspad (up/down/ieii/ngnt
navigation buttons)
Return to the previous place in the menu orapp
Aii Apps
Confirmation button
Media content cuntroi runctiun buttons
Quick access buttons to apps
12
Exit the appiicaiion
7 Specrai iunenon buttons
7 Set ine audio ianguagewTS)
, 7Apps uriunction key
CAUTION: The inciuded remote control wili vary depending on model, country and date of manulacture.
STEP 4. Begin using your remote
1. Slide the back cover to open the battery compartment ofthe remote
control
Gently push and slide Insert the batteries
Gently push and slide
2. Insert two AAA size batteries. Make sure to match the (+) and
(-) ends of the batteries With the (+) and (-) ends indicated in the
battery compartment
3. Replace the battery compartment cover.
Important Information about the remote and batteries
Discard batteries in a designated disposal area. Do not throw
them into a fire.
Remove old batteries immediately to prevent them from leaking
into the battery compartment.
If you do not intend to use the remote control tor a long time.
then remove the batteries.
Battery chemicals can cause a rash. It the batteries leak, clean
the battery compartment with a cloth. If chemicals touch your
skin then wash it immediately.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(Nicd, NiMH, etc.) batteries.
is
- Do not continue using the remote it it gets warm or hot.
Call our Support Center immediately on the support
website.
Remote Control Range Information
- The remote control can work at a distance of up to 26 leet In
lront of the TV set.
i It can work at a 30 degree horizontal or vertical angle.
Program Your Universal Cable or Satellite
Remote Control to Operate Your New Television
(only for USA)
If you would like to program yourother household remote
controls to your new television, please reler to the User Manual
supplied by your Cable or Satellite provider. It should include
instructions on how to program their remote to your television.
A list of codes for the most common Cable and Satellite
providers are listed below. Use the code that is associated With
your Cable or Satellite provider (if applicable).
DIRECTV.....0178,10178,10019,10748.11314,11660,11710,
11780, 12049, 10171. 11204, 11326, 11517,11564, 11641,
11963,12002,12183
Time Warner Cable ..... 386, 0178, 10178, 400, 450, 461, 456,
0748, 1463, 0463. 10463
Comcast ..... 0178,10178,10463,11463,1o748,1131411660, STEP 5_ Power on the TV
1o171,11204,11326,11517,11641,11780,11785,11892,11963,
12002 Plug the power cord into a wall outlet.
Cox Communications ..... 0178, 10178, 1326, 1463
Dish Network . .505, 527, 538, 720, 659
It the code associated with your Cable or Satellite provider is
not listed, does not work or you cannot locate the instructions to
program your remote, call your local Cable or Satellite provider's
customer service center.
If your Cable or Satellite provider does not have a code available, lwill;i:i{i:lji;ilili}i§i§i§i
1111111101111111111111811111
please contact us at one of the phone numbers on Page 2.
Using Your Cable Set-tap Box or Satellite Receiver
Remote as a ‘Universal’ Remote
It you prefer to use your Cable Set-top Box or Satellite Receiver
Remote as a ‘Universal Remote', then visit the Support page to view
a list of the codes.
Power Cord
Wall Outlet
14
Press the Power button @ on the remote to turn on the TV, A
splash screen that shows the logo appears. Next, the FirstaTime
Setup Menu begins by promptan you to choose your Language
Country, and Time Zone.
t5
STEP 6. Complete the first-time setup
menu
After the splash screen that shows the logo appears, begin the
firstatlme setup menu,
Screen
Language and
Location
End User License
Agreement
TV Usage
Network
Connection
Task
- Usan the D-pad arrows at your remote
chooseyour Language. Country and Time Zone.
- Choose Decline orAgreel then select Confirm
icon and press [OK]
- Select Home Mode (whlch appears by oerault),
- NOTE: ‘Store modE‘ should only be selected by
Retailers who plan to demonstrale the TV
- llyourTv does not automatlcally detect an
Ethernet connectron, then use a wireless network
Select your network trom lhe llst lhal orsolays,
input the password. Also you can add a hidden
network
Screen Task STEP 7. Begin to enjoy your TV
Select your primary Seiect how you receive yourTV channeis Your Smart W is easy ‘0 use and bragrwonhy,
input source Choose from one cl the loiiowing sources below
- HDMi
' QUT’CABLE Now that you’ve completed the firstrtime setup menu, the Home
: COMPONENT screen is your starting point for nawgating the TV, Gone are
- NONE the days where your TV oniy provides one way for you to be
TIP: If you use an antenna '0 receive Channels. entertained. This showpiece prowdes you the convenience
then you must Dumpiele the first-time Setup
menu in order to m” a channel scan. of watching a program on alive channel, accessing Video on
Demand to watch a movie and many other entertainment options.
Using your remote, press the Home button to begin enjoying your
TV,
Disclaimer: Subscriptions or other payments may he required to access content through some applications. Some or all of the included
or downloaded application sen/ices in this Hisense device may not function depending on the lnternet connection, local limitations of
included applications or other reasons outside of Hisense's control, HISENSE EXPRESSLY DlSCLAlMS RESPONSIBlL/TY FOR ANY
APPLICATION SERVICE FROM FUNCTIONING ATANY TIME, FOR CONTENT IN ANYAPPLICATION SERVICE, FOR DlSRUPTIONS
OF SERVICE, LOCAL OR REGIONAL LIMITATIONS, WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. By purchasing this device, you accept such
Disclaimer without any claim on Hisense at any time.
16
PRODUCT SPECIFICATIONS
Modal Name
Dimension Without Stand
(w x H x D)
55H9D Plus
55H9907
BSHBD Plus
65H9907
486x231x24inches
(1235 x 713x ac mm)
572><329x241nches
(1452 X 13:15 x 61mm)
Witn Sland 48.6 x 30 x 9 Inches 57.2 x 35 2 x 11 4 inches
(1235 x 763 x 229 mm) (1452 x 595 x 290 mm)
Weight WithouIStand 41.9 lbs (19 kg) 70.1 lbs (31 8 kg)
with Stand 43 2 lbs (19 5 kg) 714|bs(32 4 kg)
Active Screen Size (Diagonal) 54.6 inches 64.5 inches
Screen Resolution 3 840 X 2 ‘lSD 3 840 X 2 160
AudioPower 10W+10W 15W+15W
Power consumplion 175W 210W
Power Supply 120 v ~ 60 Hz 120 v ~ 60 Hz
Connectivity BullHn Wireless feature (2X2 dual band)
Key Apps Nemlx, Vudu, You'iube, Amazon lnslanl Video, Pandora and Opera App (Some apps only for USA)
Paris 4 Hum ports, 3 USB ports, 1 LAN ponfor Ethernet, 1 DlglialAudlo Oulput, 1 RF lnpui, 1 Earphone Audio Output,
1 RCA Composile Video lnpuI, 1 Iefi/rlghIAudlo InpuI for Composile, 1 RCA Component Video Input
Omar Vealures Smart TV, Dynamic Contrast Picture, VESA Slandard wall mount support, Web browser, Parenlal Control and Closed
Capllon, High Dynamic Range processing
Disclaimer: All products, product specifications, and data are subject to change without notice lo improve reliability, function, design or
otherwise.
17
QUICK PROBLEM-SOLVING TIPS
When you experience an issue with yourTV, turn it off and on again. iilhis does not resoive the probiem. then refer lo the tips below. If
the problem is still not resolved. then Contact us at one oiihe phone numbers on Page 2.
ISSUES
No sound or picture
I have conneoled an external
source to my Tv and I gel no
picture and/0r eound.
When l turn on my TV, there is a
delay tor a tew seconds oetore lhe
picture appears. ls his normal?
The picture is normal but there is
no sound
Sound but no picture or black and
while picture
The sound and/or piclure is
distorted or appeals wavy
The sound and picture is blurry or
cuts out
A horizontal or vertical stripe
appears on the picture and/orthe
picture is shaking
POSSIBLE SOLUTIONS
~ Check lrlhe power cord is plugged into a powered AC oullet
- Press the @ Power button on the remote control to activate the unit irom 'Siandby‘ mode
~ Check to see lithe LED light is on or not if lt ls, lhen the TV is recelVlng power
~ Check tor the correct output connection on the external source and lor the correct input connection on the TV.
~ Make sure you have made the correct selection lor the input mode lor the incoming signal.
- Ves. this is normal. The TV is initializing and searching tor prevrous setting Information.
- Check the voiurne sailings.
- Check it 'Mute' mode is set to On.
- lithe picture is biack and white. unplug the TV irom the AC outlet and replug it alter so seconds
- Check that the Color is set to so or higher.
- Try olllerent TV channels
- An electric appliance may be arlectlng the TV. Turn cit any appliances that are nearby and move it larther away
from the TV,
- insert the power piug oi the TV set into another power outlet.
. ll using an externai antenna. check the direction. position and conneclion orlhe antenna.
. Adyusl the direcilorl oi your anlenna or resel or fine tune the channel
. Check ii there is an appliance or electric tool nearby thal is causing lnlerference
la
The plastic cabinet makes a - The ‘Click' sound can Occur when the temperature 01 the television Changes. This Change Causes the television
”clicking" type 0' sound Cabinet to expand or contract, which makes the Sound. This is normal and the TV is OK.
- Confirm (har TV sun has power and is operational.
The remote control does network - Change the batteries in the remote control.
- Check if the batteries are correctly installed
Need more help?
Additional help is available online at support links on Page 2. You will find answers to frequently asked questions,
downloadable firmware and more.
19
Certification and Compliance
FCC Notice
This device has been tested and found to comply With the limits
for a Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
device generates. uses. and can radiate radio frequency energy
and, if not installed and used in accordance With the instructions.
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. lf this device does cause
harmful interference to radio or television reception, which can
be determined by turning the device off and on. the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- lncrease the separation between the device and receiver
- Connect the device into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modi cations
to this equipment. Such modifications could void the
user's authority to operate the equipment.
20
The WirFi Module complies With FCC radiation exposure limits
set forth for an uncontrolled enVironment. This deVice should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
Manuraetured under license from Dolby Laboratories Dolby. oeieyAudie arid
DOLBV the double-D symbol are trademarks of Dolby Laboratories
AUDlO
HEIITII
Trie terms HDMl and HDMl Hrgnoeinrtron Mulllrriedia lriterface,
and the HDMl Logo are trademarks or registered trademarks
oiHDMl Licenslrig LLC in tiie United States and other countries
d'bm'lllmlllllm a Manuiactured under license irom THAT Corporation
x I'V THAT Corporation, dbx-tv, Total Sonics. Total Surround
arid Total Volume are registered trademarks of THAT
Corporation Total Technology is a trademark of THAT Corporation,

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2017:02:07 08:55:34+08:00
Metadata Date                   : 2017:02:21 11:41:05+08:00
Modify Date                     : 2017:02:21 11:41:05+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:f466bcb8-ae45-47ac-b0d9-f4f896a051f3
Original Document ID            : xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A
Document ID                     : xmp.id:7F571C740720681183D1902291D67C59
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7E571C740720681183D1902291D67C59
Derived From Document ID        : xmp.did:7E571C740720681183D1902291D67C59
Derived From Original Document ID: xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2017:02:07 08:55:34+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Has XFA                         : No
Page Count                      : 9
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools