Hisense Electric LCDF0107 Part15 Subpart B-LED LCD TV User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3289803
Application ID	G+SOuhiFDhjweG/r8J8qaA==
Document Description	TempConfidential_W9HLCDF0107_User Manual2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.55kB (969437 bits)
Date Submitted	2017-02-21 00:00:00
Date Available	2017-08-24 00:00:00
Creation Date	2017-02-21 09:28:32
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2017-02-21 09:28:32
Document Title	untitled

NOTE
For usage in Mexico , operation of this equipment is
subject to the following two conditions : 1 ) it is posible
that this device doesn’t cause any detrimental interference
and 2 ) this device must take any kind of interference ,
including that which may cause its malfunctioning.
ES-G164776
English
Copyright Statement
Š 2017 Hisense Company Ltd. All Rights Reserved.
All material in this User Manua is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US,
CANADA, MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission
of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of
Hisense Company Ltd. is a violation of Hisense Company Ltd. rights under the aforementioned laws.
No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner,
electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of
Hisense Company Ltd.
Requests for permission to store, reproduce, transmit or distribute materials may be made to one of the following
addresses:
USA:
Hisense USA Corporation
PO Box 3289
Suwanee, GA 30024
CANADA: Hisense Canada Co., Ltd,
2283 Argentia Road, Unit 16
Mississauga, ON, Canada, L5N 5Z2
MEXICO: Hisense Mexico S de RL de CV
Boulevard Miguel de Cervantes Saavedra No. 301, Torre Norte, Piso 2,
Colonia AmpliaciĂłn Granada, C.P. 11520, en MĂŠxico Distrito Federal.
Hisense, and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks of Hisense
Company Ltd. and its subsidiaries. All other trademarks are the property of their respective holders.
Disclaimer Page
**Notwithstanding anything to the contrary, including in any or all descriptions, representations, statements or other
communications related to this Hisense device (hereinafter “Device”) made in any form whatsoever and at any time, some
or all of the pre-installed, or subsequently installed Application Services may not be available or capable of functioning
as intended by the provider of the Application Services in any or all usage areas for reasons outside of Hisense’s control,
including but not limited to, Internet access, local service limitations, etc. Any purchase or use of the Device, including
any Application Services, is purely at the user’s risk. Application Services are provided on an as-available basis without
warranties of any kind, either expressed or implied, that the Application Service will be uninterrupted or error-free,
including but not limited to vagaries of weather, disruption of Service, acts of God, warranties of title, local or regional
limitations, no infringement, NOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. No advice or information given by Hisense, providers, affiliates, or contractors or their respective employees
shall create such a warranty. Hisense specifically disclaims responsibility for any or all Application Services from
functioning at any time, and by purchasing the Device, you accept such disclaimer without any claim on Hisense. You are
solely responsible for providing an active and working connection to the Internet, along with any and all hardware and/or
software necessary to use the Hisense Device as intended.
Table of Contents
Connecting Devices to your TV ..............................................................................3
Connecting an antenna, cable set-top box or satellite receiver ........................................... 3
Connecting an AV device with a composite video cable ...................................................... 3
Connecting an AV device with a component video cable .................................................... 4
Connecting an AV device with an HDMI cable..................................................................... 4
Connecting headphones...................................................................................................... 5
Connecting speakers (or other audio receivers) ................................................................. 5
Connecting a digital sound bar to use ARC (Audio Return Channel) .................................. 6
Connecting Your TV to a Wired or Wireless Network .............................................7
Connecting to a Wireless network ....................................................................................... 7
Connecting to a Wired (Ethernet) network........................................................................... 7
Using Your TV Remote Control .................................................................................9
Completing the First-Time Setup Menu..................................................................11
Basic and Advanced TV Settings ...........................................................................13
Accessing the Quick Setup Menu...................................................................................... 13
Picture Menu...................................................................................................................... 13
Sound Menu ...................................................................................................................... 14
Channel Menu ................................................................................................................... 14
Network Menu ................................................................................................................... 14
System Menu..................................................................................................................... 15
About TV Menu ................................................................................................................. 16
Parental Controls .....................................................................................................17
Table of Contents
Getting familiar with the Home screen ...................................................................19
Live TV .....................................................................................................................20
Viewing channel information .............................................................................................. 20
Viewing a channel list ........................................................................................................ 20
Creating a 'Favorites' list .................................................................................................. 20
Viewing your ‘Favorites’ list ............................................................................................... 20
Apps...........................................................................................................................21
Apps .................................................................................................................................. 21
Customizing the name of your TV ..................................................................................... 22
Media .........................................................................................................................22
Panels that appear on the Media screen ........................................................................... 22
File formats that are supported.......................................................................................... 22
Viewing video..................................................................................................................... 22
Browsing content ............................................................................................................... 22
Viewing Pictures as a slideshow........................................................................................ 23
Mirroring content from your device to the TV ......................................................23
Software updates for your TV ................................................................................24
Quick Problem-Solving Tips....................................................................................25
Connecting Devices to your TV
Connecting Devices to your TV
You have several options for connecting your TV to different devices. The method in which you connect will be based upon the type
of cables you have and the available outputs on your device.
Connecting an antenna, cable set-top box or satellite receiver
To connect an antenna,cable set-top box or satellite receiver:
1.
2.
3.
Connect one end of a coaxial cable (not included) to the [RF OUT] jack on the antenna, cable or satellite box. If you are using an
antenna with twin-lead cable, you may need a 300-75 Ohm adapter (not provided) to connect it to the back of your TV. Likewise,
if you are using several antennas, you may need a combiner (not provided).
Connect the other end of the cable to the [ANT/CABLE] jack on the side of TV.
Using your remote, press the [INPUT] button and select TV as the input source.
(not included)
TV JACK
EXTERNAL DEVICE
Cable Set top box
ANT/CABLE
or
ANT OUT
RF Out
Figure 1. Antenna, cable set-top box or satellite receiver to the TV
Connecting an AV device with a composite video cable (yellow/red/white)
To connect an AV device with a composite video cable (not provided):
1. Use the audio and video cables to connect the composite video/audio jacks (of the external AV device) to the [AV IN] jacks
of the TV. (Video = yellow, Audio Left = white, and Audio Right = red).
2. Plug the connected devices into the AV connectors on the TV before switching it on.
3. Using your remote, press the [INPUT] button and select AV as the input source.
EXTERNAL DEVICES
TV JACK
VCR
Red(R)
White(L)
Red(R)
DVD Player/Recorder
(not included)
White(L)
Video
Camera
VIDEO
AV IN
Audio Cable
Yellow or Green(Video)
Yellow(Video)
(not included)
AV OUT
Figure 2. AV device with a composite video cable
Set-top box
Video
Satellite Receiver
Satellite
antenna
cable
Connecting Devices to your TV
Connecting an AV device with a component video cable (red/blue/green)
To connect an AV device with a component cable (which is red/blue/green):
1.
2.
3.
Use a component video cable (not provided) to connect the component output jacks of the external device to the YPBPR jacks
for the TV. Use an audio cable to connect the component audio jacks of the external device to the TV AUDIO (L/R) jacks.
Plug the connected devices into the YPBPR and L/R ports on the TV before switching it on.
Using your remote, press the [INPUT] button and select COMPONENT as the input source.
EXTERNAL DEVICES
TV JACK
PR
Red(R)
White(L)
Audio Cable
(not included)
VCR
White(L)
DVD Player/Recorder
Red(PR/CR)
Blue(PB/CB)
Green(Y)
PB
COMPONENT IN
Red(R)
Red(PR/CR)
Component Cable
PR
Blue(PB/CB)
(not included)
PB
Green(Y)
Video
Camera
Set-top box
Satellite
antenna
cable
Component
Satellite Receiver
Figure 3. AV device with a component video cable
NOTE
One AV device can be connected to the TV using a component video or composite video cable.
Connecting an AV device with an HDMI cable
This type of connection supports digital connections between HDMI-enabled AV devices such as a Personal Video Recorder (PVR),
DVD, Blu-Ray, AV receiver and digital devices. In addition, some devices (such as a PVR or DVD player) require an HDMI signal to
be set to Output in the settings of the device.
Please refer to the User Manual that came with your device for step-by-step instructions.
To connect an AV device with an HDMI cable:
1.
2.
3.
Use an HDMI cable to connect the [HDMI] output port of the AV device to the [HDMI] jack of the TV.
Plug the connected devices into the power socket.
Using your remote, press the [INPUT] button and select the corresponding HDMI input.
EXTERNAL DEVICES
HDMI Cable
HDMI
HDMI
TV JACK
DVD
Set-top Box
Figure 4. AV device with an HDMI cable
NOTES
‡ Because the HDMI connector provides video and audio signals, it is not necessary to connect an audio cable.
‡ The HDMI cable will not supplied with the product.
‡ We strongly recommend to use HDMI Cable with 2 cores as shown in the figure.
Connecting Devices to your TV
Connecting headphones
You can connect headphones to the [AUDIO OUT] port on your TV. While the headphone is connected, the sound from the built-in
speakers will be disabled.
TV JACK
EXTERNAL DEVICES
AUDIO OUT
Audio Cable
(not included)
Figure 5. Headphones to the TV
Connecting speakers (or other audio receivers)
To connect speakers (or other audio receivers) with an audio cable:
1.
2.
Use an audio cable (not provided) to connect the [DIGITAL AUDIO IN] jack of the audio receiver device to the [DIGITAL AUDIO
OUT] jack of the TV. Another option is to use an RCA Y-cable (1/8”-stereo mini to L/R phono) to connect an analog sound
system to the [AUDIO OUT] jack of the TV.
Plug the connected devices into the main power socket before switching on the TV.
TV JACKS
DIGITAL
AUDIO OUT
EXTERNAL DEVICES
Audio Cable
(not included)
Digital Sound Bar
AUDIO OUT
Red(R)
Audio Cable
(not included)
White(L)
$XGLR$PSOLÂżHU
Powerless
Bass Speaker
Speaker
Figure 6. Audio receiver with audio cable
NOTE
If you prefer to use Audio Return Channel, then follow the steps on the next page under 'Connecting a digital sound bar to
use Audio Return Channel'.
NOTES
‡
‡
‡
When a digital audio system is connected to the [DIGITAL AUDIO OUT] jack, decrease the TV and system volume.
5.1 CH (channel) audio is available when the TV is connected to an external device that supports a 5.1 channel surround sound
You can receive 5.1 channel audio in one of two ways. The first way is to connect the [DIGITAL AUDIO OUT] jack from the
device to the Amplifier. The second way is to connect the [DIGITAL AUDIO OUT] jack on the back of the TV to the [Optical]
port on the Amplifier. After you’ve completed one of the two methods then be sure to go into the Advanced Audio Settings of the
TV and select RAW to receive the 5.1 channel audio. You will need to also go into the sound or audio settings of your device to
ensure it is set to 5.1 Channel output. It may read ‘Bitstream’, ‘RAW’ or ‘Digital’.
Connecting Devices to your TV
Connecting a digital sound bar to use ARC (Audio Return Channel)
If you'd like to use the Audio Return Channel (ARC) feature to have sound sent from the TV back down an HDMI cable to a digital
soundbar, then you will need to connect the cable to the [HDMI (ARC)] port. By using this feature, you will also be able to control the
soundbar with your TV remote instead of having to use multiple remotes for each device.
NOTE
Only digital sound bars that require a wired connection are compatible with the H6 Series Smart TV.
To connect a digital sound bar with an HDMI cable:
1. Connect the cable that’s attached to the soundbar to the HDMI (ARC) port on the TV.
2. Turn on the soundbar by pressing the Power button.
3. Press the [Quick Setup menu] button on your remote and go to System > CEC Function
4. Turn on the CEC Control setting.
5. Select Sound > Advance Audio Settings > TV Speaker & ARC and select ARC First.
6. If the device has an ‘Input Selector’ feature then make sure to change it to ‘TV’.
EXTERNAL DEVICES
HDMI
TV JACK
HDMI Cable
(not included)
Digital Sound Bar
Figure 7. Digital Sound Bar to the HDMI (ARC) port
Connecting your TV to a Wired or Wireless Network
Connecting Your TV to a Wired or Wireless Network
You have the option to connect your TV to a wireless or wired network to access the Internet.
Connecting to a Wireless Network
The LAN Port on the Wall
Wireless Router
Wireless Adapter
built-in the TV set
(not included)
LAN Cable
Figure 8. Connect the TV to a wireless network
Our built-in wireless LAN adapter supports the IEEE 802.11 b/g/n communication protocols and we recommend that
you use an IEEE 802.11n router. When you play a video over an IEEEE 802.11 b/g connection, the video may not play
smoothly.
‡
‡
‡
‡
‡
‡
NOTES
You must use the Hisense built-in Wireless LAN Adapter to use a wireless network because the set does not
support an external USB network adapter.
To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
Dynamic Host Configuration Protocol (DHCP), your TV can use a DHCP or static IP address to connect to the
wireless network.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP
sharer is currently being used by another device nearby, this will result in interference and communication failure.
If you apply a security system other than the systems listed below, it will not work with the TV.
If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP
or TKIP-AES (WPS2 Mixed) for your Access Point (AP), then the Hisense TV will not support a connection in
compliance with these Wi-Fi certification specifications.
If your access point (AP) supports Wi-Fi Protected Setup (WPS), you can connect to the network via Push Button
Configuration (PBC) or PIN (Personal Identification Number). WPS will automatically configure the SSID
and WPA key in either mode.
Connecting to a Wired (Ethernet) Network
You can attach your TV to your LAN in one of the three following ways:
Option 1.
‡
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5
LAN cable. See Figure 15.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
LAN Port on TV
LAN
Modem Cable
Ethernet Cable
Figure 9. Connect a LAN port on the TV to an external modem
Connecting your TV to a Wired or Wireless Network
Option 2
‡
You can attach your TV to your LAN by connecting the [LAN] port on the back of your TV to an IP Sharer which is connected to
an external modem. Use an Ethernet cable for the connection. See figure 16.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN Port on TV
LAN
Modem Cable
Ethernet Cable
Ethernet Cable
Figure 10. Connect a LAN port on the TV to an IP sharer
Option 3
‡
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the [LAN] port on
the back of your TV directly to a network wall outlet with an Ethernet cable. See the diagram below.
The LAN Port on the Wall
LAN Port on TV
LAN
Ethernet Cable
Figure 11. Connect a LAN port on the TV to a network wall outlet
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol
(DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so
you don’t have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet
mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get
the IP address, subnet mask, gateway and DNS values, contact your Internet Service Provider (ISP).
NOTE
You can use ADSL modems that support DHCP if your network requires a static IP address. ADSL modems that support DHCP
also let you use static IP addresses.
Using Your TV Remote Control
Buttons on your TV remote
Infrared transmitter
3RZHURQRႇ
INPUT
Change TV input source
Enter Channels / input numbers
7XUQ&ORVHG&DSWLRQ2Q2ႇ
Dash button
Select a digital sub-channel
CC
Special function buttons
Live TV
The button for the Quick setup menu
TV
&RQÂżUPEXWWRQ
OK
D-pad (up/down/left/right
navigation buttons)
Return to the previous place
in the menu or app
BACK
EXIT
Display the Home screen
Exit the application
Mute and restore sound
Volume (up / down)
VOL
CH
Channel (up / down)
MTS
Set the audio language(MTS)
Media content control function buttons
NRT
Choose to leave the Video description
IHDWXUH2QRU2ႇ
Quick access buttons to apps
Using Your TV Remote Control
Begin using your remote
1. Slide the back cover to open the battery compartment of the remote control.
Gently push and slide
Insert the batteries
Gently push and slide
2. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and ( - ) ends indicated in the
battery compartment.
3. Replace the battery compartment cover.
Important Information about the remote and batteries:
‡
‡
‡
‡
'LVFDUGEDWWHULHVLQDGHVLJQDWHGGLVSRVDODUHD'RQRWWKURZWKHPLQWRDILUH
5HPRYHROGEDWWHULHVLPPHGLDWHO\WRSUHYHQWWKHPIURPOHDNLQJLQWRWKHEDWWHU\FRPSDUWPHQW
,I\RXGRQRWLQWHQGWRXVHWKHUHPRWHFRQWUROIRUDORQJWLPHUHPRYHWKHEDWWHULHV
%DWWHU\FKHPLFDOVFDQFDXVHDUDVK,IWKHEDWWHULHVOHDNFOHDQWKHEDWWHU\FRPSDUWPHQWZLWKDFORWK,IFKHPLFDOVWRXFK
your skin then wash it immediately.
‡ 'RQRWPL[ROGDQGQHZEDWWHULHV
‡ 'RQRWPL[DONDOLQHVWDQGDUG FDUERQ]LQF RUUHFKDUJHDEOH 1L&G1L0+HWF EDWWHULHV
‡ 'RQRWFRQWLQXHXVLQJWKHUHPRWHLILWJHWVZDUPRUKRW
Call our Support Center immediately on the Hisense support website.
Remote Control Range Information
The remote control can work at a distance of up to 26 feet in front of the TV set.
It can work at a 30 degree horizontal or vertical angle.
Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television
(only for USA)
If you would like to program your other household remote controls to your new Hisense television,please refer to the User's Manual
supplied by your Cable or Satellite provider. The Cable or Satellite providers' User's Manuals should include instructions on how to
program their remote to your television.
A list of Hisense codes for the most common Cable and Satellite providers are listed below. Use the Hisense code that is associated
with your Cable or Satellite provider (if applicable).
DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963,
12002, 12183
Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463
Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963,
12002
Cox Communications......0178, 10178, 1326, 1463
Dish Network......505, 627, 538, 720, 659
If the Hisense code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions
to program your remote, call your local Cable or Satellite provider’s customer service center.
If your Cable or Satellite provider does not have a Hisense code available, please contact us.
Using Your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal’ Remote
If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, then visit the Support page to view
a list of the codes.
10
Completing the First-Time Setup Menu
Now that you have attached the TV stand and connected your external devices, it's time to complete the first-time setup menu.
Completing the First-Time Setup Menu
Press the [Power] button on the remote to turn on the TV.
A splash screen that shows the Hisense logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your
Language, Country, and Time Zone.
Screen
Language and Location
Task
LANGUAGE AND LOCATION
Language
Country
English
Language
Time Zone
United States
Terms
Mode
Network
Eastern
Input
1.
Using the D-pad arrows of your remote, choose your
Language, Country and Time Zone.
2.
Next, navigate to the Forward arrow and press OK.
TIP: The edge of the drop-down boxes and the back and forward
arrows change to blue when you select them.
Done
Terms of Service
TERMS OF SERVICE
1.
Press [OK] on your remote to select Accept all.
2.
When you’re done, then navigate to the Forward arrow and
press [OK].
Accept all
The EULA and Terms must be accepted in
order to continue.
Accept EULA
Accept Terms of Serv...
Language
Terms
Mode
Network
Input
Done
TV Usage Mode
TV USAGE MODE
Select Home (which appears by default) and then navigate to the
Forward arrow to press [OK].
NOTE: ‘Store mode’ should only be selected by Retailers who
plan to demonstrate the TV.
TV Mode
Home
Home Mode
In Home Mode, your TV will automatically adjust the
brightness of your screen based on the ambient light in
the room. This mode uses less energy.
Language
Terms
Mode
Network
Input
Done
Disclaimer: Images throughout this document are for illustrative purposes only and may differ from the actual product.
11
Completing the First-Time Setup Menu
First-time Setup Menu (continued)
Screen
Network Connection
Task
If your TV does not automatically detect an Ethernet
connection, then select WiFi. When you’re done, select
your network from the list that displays and move to the
next screen.
NETWORK CONNECTION
Ethernet
WiFi
Connecting Ethernet
Configure
Language
Terms
Mode
Network
Input
Done
Remote Button Setup
Live
TV
Select how you receive your TV channels. Choose from
one of the following sources below and then move to the
next screen.
‡79
‡$9
‡&20321(17
‡+'0,
REMOTE BUTTON SETUP
TV
AV
HDMI1
Language
COMPONENT
HDMI2
Terms
Mode
NOTE: If you use an antenna to receive channels,
WKHQ\RXPXVWFRPSOHWHWKHÂżUVWWLPHVHWXSPHQXLQ
order to run a channel scan.
HDMI3
Network
Input
Done
Congratulations! Your TV is now ready to use.
Press [OK] on your remote if you are fine with the selections that appear on the screen. Otherwise, navigate
to the back arrow on the screen to change your selection.
CONGRATULATIONS !
Your TV is now ready to use
TV Selections
English
United States Eastern
Home Mode Ethernet
OK
Language
Terms
Mode
Network
Input
Done
12
TV
Basic and Advanced TV Settings
Your Hisense TV comes with many TV setting features to allow you to customize the picture based on your viewing preference and
environment.
Accessing the Quick Setup Menu
You can press the [Quick Setup menu] button [
] and press the right arrow on the D-pad to view the full menu settings.
The Settings menu consists of the following settings:
‡ Picture
‡ Sound
‡ Channel
‡ Network
‡ System
‡ About TV
Picture Menu
Picture Mode: If you’d like to configure the settings for your picture, then there are
six types of picture modes available: Vivid, Standard, Theater, Energy Saving,
Game and Sport.
Once you choose the mode, you can adjust the picture based on the following
settings:
Settings
Picture Mode
Picture
Standard
Sound
50
Channel
50
Network
50
Brightness: Adjust the Brightness level to generate lighter or darker images.
System
Contrast: Adjust the Contrast level to increase or decrease how bright images
appear.
About TV
Brightness
Contrast
Color
Aspect Ratio
Auto
Backlight
Advanced Picture Settings
Restore Default Picture Settings
Color: Adjust the color intensity of the picture for a more vibrant image.
Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You
can choose from the following settings: Auto, Direct, 1:1 PIXEL MAP, Panoramic, Cinema, Wide, Zoom or Normal.
Backlight: This TV has a Dynamic Backlight Control setting that you can turn ‘On’ and set to high or low. The Backlight setting
enables you to adjust how bright you want images to appear. In addition, an Eco Sensor setting is available that will enable the TV
to automatically adjust the picture settings according to the amount of ambient light in your room. The Minimum Backlight setting
enables you to adjust how low you want the backlight to be when you view content in a dark or well-lit room. This is a moneysaving feature because it reduces power consumption.
Advanced Picture Settings: Adjust advanced picture settings based on your viewing preference.
‡ Display: Adjust advanced picture settings in the component source.
‡ Overscan: Change the video size settings to slightly crop the edges of the displayed image.
‡ Tint: Adjust the colors from a green to magenta tint to view the natural skin tones of people on the screen.
‡ Sharpness: Adjust how sharp or soft edges of images appear.
‡ Noise Reduction: Improve how clear the picture appears by reducing noise.
‡ Film Mode: Improve how clear the picture appears by reducing noise1.
‡ Adaptive Contrast: Automatically darken dark areas and lighten light areas of images to see more details.
‡ Color Temperature: Select a preset color temperature.
‡ White Balance: Adjust the intensity of red, green and blue lights to view the true colors of all images in the picture.
‡ Color Tuner: Adjust the Hue, Saturation and Brightness of color settings.
Restore Default Picture Settings: Restore all the picture settings in the current picture mode to the factory default values.
13
Basic and Advanced TV Settings
Sound Menu
Sound Mode: Select a preset sound mode to suit the type of content you are
listening to: Standard, Theater, Music, Speech and Late Night.
Set the sound effects to suit your preference:
Settings
Sound Mode
Picture
Standard
Audio Enhancements
Sound
Configure your audio settings for your sound preferences. Once you choose the
mode, you can adjust the audio based on the following settings:
Audio Enhancements: dbx-tv’s Total Technology™ delivers the best possible
audio experience from your TV.
Advanced Audio Settings
Channel
Restore Default Audio Settings
Network
System
About TV
‡
Total Sonics: Optimizes overall sound quality by increasing bass,
making dialog clear and natural, and widening the sound field.
‡
Total Surround: Provides surround sound experience with psychoacoustic processing to place sounds beside, behind, and above the viewer. For best results use with Total Sonics.
‡
Total Volume: Maintains consistent loudness levels from wide dynamic range programs, too-loud commercials, and
channel or input changes.
Advanced Audio Settings: Tune the audio settings and quality of the TV.
‡ (TXDOL]HU Boost the volume at different frequencies.
‡ Lip Sync: Synchronize the displayed image with the audio output.
‡ Balance: Adjust the left and right speaker strength to optimize audio for a specific location.
‡ Digital Audio Out: Select the digital audio output format that best suits the audio device type. For example, choose RAW (which
is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set up. Choose PCM if you have an
amplifier that does not support Dolby Digital technology.
‡ Digital Audio Delay: Adjust the digital audio output delay time to sync sound from an external speaker with the images on the
TV.
‡ TV Speaker & ARC: Select the TV speaker or an external speaker for sound output.
‡ Audio Out: Change the way audio is sent through the type of device that’s connected to your TV Audio Out port.
Restore Default Audio Settings: Restore all of the audio settings in current audio mode to the factory default values.
Channel Menu
Tuner Mode: Select Tuner Mode if you receive TV channels over the air (antenna)
or through a cable set top box. The input will be used during a channel scan.
Auto Channel Scan: Automatically scan for channels to view programming from
your TV source.
Settings
Tuner Mode
Picture
Sound
Antenna
Auto Channel Scan
Channel Skip
Channel
Favorites List
Channel Skip: Skip a channel that your TV picked up during a previous channel
scan search.
Network
Favorites List: Quickly access your most-watched channels by creating a Favorites
list.
About TV
System
Network Menu
Network Configuration: Set up the network to gain full access of Smart TV
features.
When the Connection Type is Ethernet, means you choose a wired network
connection to access the Internet.
Settings
Picture
Network Information
Sound
Disconnected
Channel
On
‡ Ethernet: Display the network connection status.
Network
‡ IP Setting Mode: Configure the IP setting for your network connection.
System
When the Connection Type is Wireless, means you choose a wireless network
connection to access the Internet.
1HWZRUN&RQÂżJXUDWLRQ
About TV
Anyview Stream
TV Name
Smart TV
Wake on Wireless Network
2ႇ
Wake on LAN
2ႇ
‡ Advanced Settings: Configure the advanced wireless network settings for the
TV.
‡ Available Networks: Select an available network to connect. And you can also add wireless network or refresh wireless
network.
When the Connection Type is Off, means you turn off the Internet connection.
14
Basic and Advanced TV Settings
Network Information: View information about your network connection.
Anyview Stream: Share video, music or other content from another device on to your TV screen.
TV Name: Choose a name for your TV. The name will be shown to devices that are available for sharing data.
Wake on Wireless Network: Using a wireless connection, turn on your TV with a screencast feature inside an app.
Wake on LAN: Using an Ethernet connection, turn on your TV with a screencast feature inside an app.
System Menu
Location: Choose the location from where you will watch your TV.
Settings
Location
Time: Set the current time based on your location.
Picture
‡ Time Zone: Select your time zone.
Sound
‡ Time Format: Set the time to display in a 12 or 24-hour format.
Channel
Parental Controls
Network
Application Settings
System
Accessibility
About TV
Closed Caption
USA
Time
‡ Daylight Savings: Select whether to apply Daylight Savings Time to the TV.
‡ Date/Time: Set the Date and Time.
‡ Power On Timer: Enable the Power On Timer to Off, Once or Daily.
Language
CEC Function
Advanced Settings
‡ Power Off Timer: Enable the Sleep Timer to Off, Once or Daily.
‡ Sleep Timer: Set the sleep timer to automatically turn the TV Off within a
specified time: Off, 10 Minutes, 20 Minutes, 30 Minutes, 40 Minutes, 50 Minutes,
60 Minutes, 90 Minutes and 120 Minutes.
Language: Adjust the default language settings for the TV.
Parental Controls: Turn On Parental Controls to block children from being able to view certain programs. The default password is
0000.
‡ Locks: Enable or disables all locks. All selected locks can be turned off for parental viewing and easily turned on again.
‡ Block Time: Block certain channels and programs during certain periods of time.
‡ Channel Block: Block programs by channels when you turn On the Parental Controls feature.
‡ Program Block: Block certain programs when your turn On the Parental Controls feature.
‡Input Block : Block content from devices that are connected to certain TV ports.
‡App Block :
‡ Change PIN: Change your PIN that you use to access Parental Controls. If you want to change your parental control password,
first enter the new password then enter the same password again.
NOTE
If you forget your password, call the Hisense Consumer Electronics Care Center.
‡ Restore Parental Control Defaults: Restore Parental Control back to the factory default setting.
Application Settings: Set settings for apps on your TV.
‡ Netflix : Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed for you service.
‡ ESN : Display the Netflix Electronic Serial Number.
‡ VUDU : Remove this TV from your VUDU account. Please contact VUDU if you want to stop being billed for you service.
Accessibility:
‡ Menu Audio : Choose to leave the Audio Menu Prompts On or Off.
‡ Video Description: Choose to leave the video description feature On or Off.
‡ High Contrast Menu : Choose to leave the high contrast menu On or Off.
‡ Menu Audio Settings: Adjust settings for the Menu Audio function.
Closed Caption: Adjust Closed Captioning settings.
‡ Caption Control: Select an Caption Control setting from CC On, CC Off, CC On When Mute.
‡ Analog Caption: Select an Analog Caption setting from Off, CC1-CC4, Text 1-TEXT4.
CC1-CC4: Closed captioning appears in a small banner across the bottom of the screen. CC1 is usually the “printed” version of
the audio. CC2-CC4 display content are provided by the broadcaster.
Text1-Text4: Closed captioning that covers half or all of the screen. Text1-Text4 display content are provided by the broadcaster.
15
Basic and Advanced TV Settings
Off: To turn off the Analog Caption.
‡ Digital Caption: Select a Digital Caption setting: Off,CS1-CS6.
‡ Digital CC Settings: There are two Caption Styles. One is the Automatic function set as the broadcaster, while the other is the
Custom style where you can adjust the font Size, Font, Text Color, Text Opacity, Background Color etc.
CEC Function: Configure how to control CEC-enabled devices with your TV remote.
‡ CEC Control: Allow HDMI devices to control each other.
‡ Device Auto Power Off: Automatically turn off HDMI CEC devices when the TV is turned off .
‡ TV Auto Power On: Allow the TV to turn On with CEC-enabled devices.
‡ Device Connect: Allow CEC-enabled devices to communicate with each other when connected through an HDMI cable.
‡ CEC Device Lists: View a list of all CEC-enabled devices.
NOTES
‡ HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
‡ The HDMI CEC feature of the connected device must be turned on.
‡ If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features do not work.
‡ Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.
Advanced Settings: Access the Advanced Settings menu.
‡ Menu Timeout : Set the amount of time that you’d like for the menu to display: 5s, 10s , 20s , 30s , 60s or Off.
‡ Use Mode: Set the TV to use in Home or Store Mode (Some models have a Store Mode with 4K Video).
‡ Input Labels: Edit the input labels.
‡ Default LiveTV Source: Select the default input selected by the remote control Live TV button.
‡ 6HWXS:L]DUG Use the Setup Wizard for instructions to help you set up your TV.
‡ Power Indicator: Set the Power Indicator light to stay On or Off when watching TV.
About TV Menu
System Information: View system information.
Settings
Hisense Legal Disclaimer: Read the Hisense Legal Disclaimer.
Picture
Check Firmware Upgrade: Check to ensure that your TV has received the latest
firmware.
Sound
Signal Diagnosis: Check availability of some functions.
Network
System Information
Hisense Legal Disclaimer
Check Firmware Upgrade
Channel
Signal Diagnosis
Restore To Factory Default
Restore To Factory Default: Restore your TV back to the factory default.
16
System
About TV
Parental Controls
Parental Controls
The Parental Controls setting allows you to block content that is not appropriate for children to watch. You can do this by creating a
4-digit password. The factory-default password is 0000.
Turning Parental Controls 'On'
To access Parental Controls:
1.
2.
3.
4.
Press the [Quick Setup Menu] button on your remote.
Press the right arrow button to display the full menu settings.
Select System > Parental Controls.
Press [OK] on your remote, an Enter PIN window displays. Using the numerical keypad on your remote, enter the factory-default
password 0000 and press [OK].
Go to Locks.
Press the [OK] button to turn the locks On.
5.
6.
You will see the other Parental Control settings change from a greyed out state and become highlighted. When this occurs, begin
adding other settings to the Block Time, Channel Block, Program Block, Input Block, Change PIN or Restore Parental Control
Defaults features.
Block Time: Choose a time of day that you’d like to start blocking certain programs.
Channel Block: Block programs by channels when you turn on the Parental Controls feature.
Program Block: Block certain programs when you turn on the Parental Control feature.
Input Block: Block content from devices that are connected to certain TV ports.
App Block:
Change PIN: Change your PIN that you use to access Parental Controls.
NOTE
If you forget your password, call the Hisense Consumer Electronics Care Center.
Restore Parental Control Defaults: Restore Parental Controls back to the factory setting.
Description of U.S. TV Ratings
Content
Defined as
All
Suggestive dialog
Course or crude language
Sexual situations
Violence
FV
Fantasy Violence
Description of Age-based Ratings
Age
Defined as
TV-Y
All children
TV-Y7
Directed to older children
TV-G
General audience
TV-PG
Parental Guidance Suggested
TV-14
Parents strongly cautioned
TV-MA
Mature Audiences Only
17
Parental Controls
U.S. Movie Ratings
Rating
Defined as
General audience
PG
Parental Guidance suggested
PG-13
Parents strongly cautioned
Restricted
NC-17
No one 17 and under permitted
A rating that has now been superseded by NC-17
Canadian English Ratings
Rating
Defined as
Children
C8+
Children 8 years and older
General programming that is suitable for all audiences
PG
Parental Guidance
14+
Viewers 14 years and older
18+
Adult Programming
Canadian French Ratings
Rating
Defined as
General (appropriate for all ages and must contain little to no violence or sexual content)
8+
General but inadvisable for young children (could contain scenes disturbing to children under eight).
Recommended for viewing with parent.
13+
Programming is appropriate for children 13 and older and may contain moderate violence, language and some sexual
situations
16+
Recommended for children 16 and older and may contain strong violence, language and sexual content
18+
Programming intended for viewers that are 18 and older. Programming may contain extreme violence and graphic
sexual content/pornography.
NOTE
All ratings that are higher than those you select are also blocked. For example, if you choose to block the PG-13 rating, then the
higher ratings (R and NC-17) are automatically blocked too.
18
Getting familiar with the Home screen
Getting familiar with the Home screen
The simple design of the Home screen menu makes it easy to navigate. It accesses Apps, Media or Inputs.
To access the Home screen, press the [
] button on your remote control and use the arrows buttons to make your selection.
NOTE
The menus are only for reference, may vary slightly from the actual screen.
Figure 12. Home screen
Indicators and Icons on the top of the Home screen
You can always view the current time in the top right corner of the Home screen.
If your TV is connected to the Internet through a wireless connection or an Ethernet cable, then an icon will
display in the top right corner of the screen. This location makes it very convenient for you to determine if you
still have Internet connectivity as you use the TV.
In addition, if you have connected a device (such as a thumb drive) to a USB port and your TV recognizes it,
then a device icon will also display in the same area.
The Apps appear on the Home screen
Each time you access the Home screen, the Apps will display on the screen. You can quickly enter these
applications what you want.
The navigation bar appear on the Home screen
Press the [ / ] buttons to select icons of the navigation bar, you can enter to Apps, Media and Input.
19
Live TV
LiveTV
To view broadcast programs, select the Live TV icon on the screen or press the [Live TV] button on your remote.
Viewing Channel information
As you use the [Channel] button on your remote to scroll through channels, an information banner appears on the top of the screen.
5-2
Antenna
10:00 PM
│ 1/1 unknown 5.1CH │ 4:3 │ 480i │ CC
1:00 AM
AT05-2
AT05 480i
12:09 AM Thu. 30 Jun.
1:00 AM - 4:00 AM AT05 480i
10
Figure 13. Information banner
The information banner displays the following information:
1. Channel number
2. Lock status
3. Input
4. Start/Stop time progress bar of the current program
5. Show identification
6. Channel name
7. Current date and time
8. Prompt
9. Beginning and end time of the next program
10. Program name
If you are watching a particular channel, you can also press the up arrow on the [D-pad] of your remote to view channel information.
Viewing a channel list
After you have done an automatic channel scan (if you're using an Antenna) or are receiving your channels through a cable provider,
you can view your list of channels by pressing [OK] on your remote.
You will see the channel list display on the right side of the screen.
Creating a 'Favorites' list
To quickly access your most-watched channels, you can create a 'Favorites' list.
To create your 'Favorites' list:
1.
Press the [Quick Setup Menu] button on your remote.
2.
Press the right arrow button to display the Settings Menu.
3.
Select Channel > Favorites List
4.
Using the up/down arrows on the D-pad of your remote, select a channel and press [OK].
A heart-shaped indicator will appear beside the channel as confirmation that it has been successfully added.
Viewing your 'Favorites' list
To view channels that you've added to your Favorites list simply press [OK] on your remote to call out the Channel list.
The channel list appears on the right side of the screen and heart-shaped icons are shown next to the channels that make up your
Favorites list.
20
Apps
Apps
Apps
Numerous factory-installed apps are available for you to choose from for your entertainment preferences.
Opera TV Store
Opera TV Store contains cloud-based apps optimized for your TV. The apps range from Video, Music, Social Networking, Games
and News Information.
To begin using Opera TV Store, you simply need to accept the End-User License Agreement and then select the app that you want
to use.
TV Browser
The TV Browser allows you to surf the Internet on your TV and provides quick access to the Google™ search engine.
To view a website or search using the TV Browser:
3.
Using the Navigation buttons on your remote, navigate to TV Browser icon.
Press [OK] on your remote.
The browser window displays.
Using the navigation buttons on your remote, navigate up to the URL bar to place your cursor there.
4.
Press [OK] on your remote to bring up the on-screen keyboard.
5.
Type the website address or search term on the text field.
6.
Press the [Blue] special function button towards the top of the remote (under the number pad).
1.
2.
The website address or search term you’ve typed populates in the URL bar window.
7.
Select the forward arrow (to the right of the URL bar) and press [OK] on your remote to load the page or start the search.
Installing an App
Even though your TV has numerous factory-installed apps, there may be others that you’d like to download.
To install an app:
1.
From the Home screen, select the Apps.
2.
Navigate to Opera TV Store.
3.
Navigate to the Search tab at the top of the screen.
4.
Begin typing the name of the app. As you begin typing the first two to three letters the Opera Store suggests words to quicken
your search time.
5.
Use the navigation buttons of your remote to select the app.
A page displays that shows a written description of the app.
6.
Click on Open or Add to Favorites.
Removing an App
You can only delete apps that you’ve downloaded to the TV. Factory-installed apps can not be deleted.
To delete an app:
1.
From the Apps screen, use the directional arrows on the navigation buttons of your remote to select the app that you want to
remove.
2.
Press the [Red] on your remote control.
A dialog message displays that asks if you’re sure you want to remove the app.
3.
Press [OK] on your remote.
A confirmation message displays and the icon is removed from the Apps list.
NOTE If an app is deleted,the information related to that app is also removed.
21
Media
Moving App Icons around
Select the app you want to move, then press the [Green] on your remote control and press [ /
/ < / >] to change order.
NOTE
Apps may be updated without prior notice, please take the actual as standard.
Some applications may not be available, depending on your TV series and the area you are.
&XVWRPL]LQJWKHQDPHRI\RXU79
If you have several TV’s in your home then you may want to customize the name of your TV. By giving your TV a name, it will make
it easier for you to identify it when connecting devices to the TV to stream or mirror content.
To customize the name of your TV:
1.
2.
] button on your remote to open the Quick Setup menu.
Press the [
Go to Full menu settings > Network >TV Name.
3.
Select User Input and press [OK] to bring up the keyboard and begin typing the name.
4.
When you are finished, power off the TV and power it back on for the change to take effect.
Media
Media is a central location for you to upload and view or listen to different types of content (for example, your photos, music and
movies) through the following methods:
‡
‡
A USB thumb drive or hard drive
Your mobile phone, tablet or other personal device: You can stream movies, pictures and photos that are stored on your
personal device and play or view the content on your TV.
When you connect your thumb drive or other personal device to the TV, the TV automatically detects it and displays a device icon in
the top right corner of the screen.
Panels that appear on the Media screen
The Media screen displays three panels: Picture, Video, Music.
File formats that may be supported
NOTE: Due to differences in programming tools and other factors, some of the file formats that are listed may or may not be
supported.
Medium
File Format
Video
.avi (MPEG2, Divx), .mkv(Divx), .mpeg(MPEG2), .wmv(Divx, XviD)
Picture
.jpg
Music
.avi(mp3, WMA, ac3), .mp3
Viewing Video
While viewing videos you will see a number of icons appear at the bottom of the screen. You can use the [D-pad] button of your
remote to select these icons that will control the video.
Browsing Content
To browse through content based on the type that you wish to access:
1. Navigate to the appropriate menu tab on the left side of the screen and select Music, Video or Picture. The library of items
displays on the right side of the screen.
2. Navigate to the right side of the screen and click on the name of the folder that contains your content.
3. Make your selection to play or view the content.
If you want to close out of the Media center, then press the [EXIT] button on your remote.
22
Mirroring content from your device to the TV
Viewing Pictures as a Slideshow
To view pictures in a slideshow:
1.
2.
Navigate to the Pictures tab.
Click on Start the Slideshow.
The slideshow of your pictures begins to play. To stop the slideshow, press the [OK] button on your remote and press it again to
restart it.
Using Anyview Cast to mirror content from your device to the TV
screen
The Hisense Anyview Cast is an app that enables you to share (or cast) a video, audio or image from your Android-based device to
the TV.
From your tablet or phone
To mirror content from your tablet to the TV:
1.
From the TV Settings, go to Network > Anyview Stream and turn it on.
2.
Press the [INPUT] button on your remote and select the Anyview Cast app.
3.
Turn on the wireless display function on your Android-based device.
NOTE
Some Android-based devices may not support casting.
4.
Find your TV in the list of devices that displays and select it.
5.
Wait for the ‘Creating Connection’ progress bar to complete on the TV screen and the video or image will display in a moment.
23
Software updates for your TV
Software updates for your TV
The software (also referred to as firmware) is part of what powers your TV. Hisense will provide software updates to continuously
enhance your TV and correct any issues that may impact your user experience; therefore, we recommend that you keep your TV
connected to the Internet to automatically receive updates when they are available.
You can choose to receive updates automatically or check for software updates and install them manually.
Checking for updates automatically
In order for your TV to receive software notification updates automatically, it must be turned 'On' and connected to the Internet. The
Auto Firmware Upgrade setting (which enables your TV to receive the updates automatically) is turned to 'On' by factory default. If
you turn the Auto Firmware Upgrade setting 'Off', it will disable this functionality of your TV.
NOTE
While your TV is on and checking for updates, the program that you are watching will not be interrupted.
Disabling the Auto Firmware Upgrade feature
If you do not want your TV to automatically check for updates and to receive notifications when they are available, then:
1.
Using your remote, press the [Quick Setup Menu] button, and press the right arrow button to display the Settings Menu.
2.
Go to About TV > Auto Firmware Upgrade and turn the feature 'Off'
By doing this, you will have to manually check to see if you have the latest software update.
Checking for the latest firmware
To manually check for the latest firmware:
1.
Using your remote, press the [Quick Setup Menu] button, and press the right arrow button to display the Settings Menu.
2.
Go to About TV> System Information.
Manually installing software updates
If you have not kept your TV connected to the Internet or you turned the Auto Firmware Upgrade feature 'Off' then you'll need to
manually install the software.
If the Check Firmware Upgrade screen shows that an updated package is available, then:
1.
From the Check Firmware submenu, select Download upgrade pack.
2.
Follow the rest of the steps that display
24
Quick Problem-Solving Tips
When you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below.
If the problem is still not resolved, then contact us.
ISSUES
POSSIBLE SOLUTIONS
There is no sound or picture from
the TV
‡&KHFNWRVHHLIWKHSRZHUFRUGLVSOXJJHGLQWRDSRZHURXWOHW
‡3UHVVWKH Power button on the remote control to activate the unit from 'Standby' mode.
‡&KHFNWRVHHLIWKH/('OLJKWLVRQRUQRW,ILWLVWKHQWKH79LVUHFHLYLQJSRZHU
I have connected an external
source to my TV and do not see a
picture and/or hear any sound
‡&KHFNIRUWKHFRUUHFWRXWSXWFRQQHFWLRQRQWKHH[WHUQDOVRXUFHDQGIRUWKHFRUUHFWLQSXWFRQQHFWLRQRQWKH
TV.
‡0DNHVXUH\RXKDYHPDGHWKHFRUUHFWVHOHFWLRQIRUWKHLQSXWPRGHIRUWKHLQFRPLQJVLJQDO
When I turn on my TV, there is a
delay for a few seconds before the
picture appears. Is this normal?
‡
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2017:02:21 09:28:32+08:00
Modify Date                     : 2017:02:21 09:28:32+08:00
Metadata Date                   : 2017:02:21 09:28:29+08:00
Document ID                     : uuid:6F74E70CD5F7E6118E03D3B144736774
Instance ID                     : uuid:0b0db642-227b-4d29-ad40-b1460bf2e01d
Derived From Instance ID        : uuid:6add32f9-7a35-d54e-90a1-d4e3f90fd0a3
Derived From Document ID        : xmp.id:FC32A64E0A206811822AE1027397EFBD
Derived From Rendition Class    : proof:pdf
Format                          : application/postscript
Title                           : untitled
Page Count                      : 29

EXIF Metadata provided by EXIF.tools