Hisense Electric LCDF0116 LED LCD TV User Manual TempConfidential W9HLCDF0116 3 2

Download:
Mirror Download [FCC.gov]
Document ID	3334643
Application ID	oQLxCsOrWAMmS232yQ/ByQ==
Document Description	TempConfidential_W9HLCDF0116_User Manual 3-2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	221.99kB (2774856 bits)
Date Submitted	2017-03-27 00:00:00
Date Available	2017-09-25 00:00:00
Creation Date	2017-03-27 10:34:52
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-03-27 10:35:03
Document Title	TempConfidential_W9HLCDF0116_User Manual 3-2
Document Creator	Adobe InDesign CS6 (Macintosh)

Buttons on your TV remote
Enter Channels l lnpul numbers
Tum Clused Capllon Onlol‘l
Live TV
The bunch iorkhe Gulck setup menu
D-pad (uplduwn/lemngnt
nawganon buttons)
Return to me prevluus place In tne menu orapp
Medla cemem oanlml luncnan hununs
Qulck access butmns Io apps
Infrared transmlller
Power on I off
cnange TV input source
7 Quick access humans to
PICTURE/SOUNDIASPECTISLEEP
Dash button
Select a dlgltal sub-channel
Mute and restore saund
Volume (up/down)
cnannel (up/down)
7 Dlsplaylhe Home screen
All Apps
Confirmatmn butlurl
Exll tne appllcanan
ispeclal lunctlon buflons
Set the audlu language(MTS)
7 Apps ar tuncnan key
CAUTION: The lncluded remote control WIll vary dependlng on model, country and date of manulaclure.
12
STEP 4. Begin using your remote
1. Slide the back cover to open the battery compartment ofthe remote
control
Gently push and slide Insert the batteries
Gently push and slide
2. Insert two AAA size batteries. Make sure to match the (+) and
(-) ends of the batteries With the (+) and (-) ends indicated in the
battery compartment
3. Replace the battery compartment cover.
Important Information about the remote and batteries
Discard batteries in a designated disposal area. Do not throw
them into a fire.
Remove old batteries immediately to prevent them from leaking
into the battery compartment.
If you do not intend to use the remote control tor a long time.
then remove the batteries.
Battery chemicals can cause a rash. It the batteries leak, clean
the battery compartment with a cloth. If chemicals touch your
skin then wash it immediately.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(Nicd, NiMH, etc.) batteries.
is
- Do not continue using the remote if it gets warm or hot.
Call our Support Center immediately on the support
website.
Remote Control Range Information
I The remote control can work at a distance of up to 26 leet In
front ol the TV set
I It can work at a 30 degree horizontal or vertical angle.
Program Your Universal Cable or Satellite
Remote Control to Operate Your New Television
(only for USA)
If you would like to program your other household remote
controls to your new television.please refer to the User Manual
supplied by your Cable or Satellite provider. It should include
instructions on how to program their remote to your television.
Alist of codes lor the most common Cable and Satellite
providers are listed below. Use the code that is associated With
your Cable or Satellite provider (if applicable).
DIRECTV ..... 0178.10178.10019.10748.11314.11660.11710.
11780.12049.10171.11204.11326.11517.11554.11641.
11953.12002.12183
Time Warner Cable ..... 385. 0178. 10178. 400. 450. 461. 456.
0748. 1453. 0463. 10453
Comcast ..... 0178,10178,10463,11463,10748,11314,11660,
10171,11204,11326,11517,11641,11780,11785,11892,11963,
12002
Cox Communications ..... 0178, 10178, 1326, 1463
Dish Network . .505, 527, 538, 720, 659
lithe code associated with your Cable or Satellite provider is
not listed, does not work or you cannot locate the instructions to
program your remote, call your local Cable or Satellite provider's
customer service center.
If your Cable or Satellite provider does not have a code available,
please contact us at one of the phone numbers on Page 2.
Using Your Cable Set-tap Box or Satellite Receiver
Remote as a ‘Universal’ Remote
It you prefer to use your Cable Set-top Box or Satellite Receiver
Remote as a ‘Universal Remote', then visit the Support page to View
a list of the codes.
14
STEP 5. Power on the TV
Plug the power cord into a power outlet.
‘ g N
1};
F' c d "'5‘ um
5312;" m Q PUWer cm W
Wall Outlet 55" Wall Outlet
Press the Power button @ on the remote to turn on the TV, A STEP 6_ Comp|ete the fir5t_fime setup menu
splash screen that shows the logo appears. Next, the FirsteTime
Setup Menu begins by prompting you to choose your Language, After the splash screen that shows the logo appears, begin the
Country, and Time Zone. firstetime setup menu.
Screen Task
Language and - Using the Depad arrows or your remote. choose
Location your Language, Country and Time Zone.
End ”59' License - Choose Decline orAgree. then select Confirm
Agreement icon and press [UK]
TV Usage - Select Home Made (whlch appears by default)
- Note: ‘Slare mode‘ should only be selected by
Retailers who plan to demonstrate the TV,
Network - If your TV does not automatically detect an
Connection Ethernet connection, then use a Wireless network
Select your network lrom the list that displays
input the password. Also you can add a hidden
network
t5
Screen Task STEP 7. Begin to enjoy your TV
Select your primary Select how you receive yourTV channels. your Smar‘ TV is easy to use and bragwonhy,
input source ggolxise from one of the foHDWlng sources below
‘ ANT/CABLE Now that you've completed the lirst-lirne setup menu, the Home
:Ié‘éMPONENT screen is your starting point for navigating the TV, Gone are
‘ NONE the days where your TV only provides one way for you to be
TIP! " YO“ “59 an antenna ‘0 WWW Chamelsr entertained. This showpiece provides you the convenience
then you must complete the firstrtime setup
menu In order to N" a channel scan. oi watching a program on alive channel, accessing Video on
Demand to watch a movie and many other entertainment options.
Using your remote. press the Home button to begin enjoying your
TV
Disclaimer: Subscriptions or other payments may be required to access content through some applications. Some or all of the includ-
ed or downloaded application services in this Sharp, Aquos or Quattron device may not luncticn depending on the Internet connection,
local limitations oi included applications or other reasons outside of the Licensor's or Manulacturers control. ALL LICENSORS AND THE
MANUFACTURER EXPRESSLY DISCLAIM RESPONSIBILITY FOR ANYAPPLICATION SERVICE FROM FUNCTIONING ATANY
TIME, FOR CONTENT IN ANYAPPLICATION SERVICE, FOR DISRUF’TIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS,
WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FORA
PARTICULAR PURPOSE. By purchasing this device, you accept such Disclaimer without any claim on any Licensor and/or the Manu-
facturer at any time and in any territory.
is
PRODUCT SPECIFICATIONS
Model Name Model LC-50P8000Ui Model LC-55P8000UI Model LC-GSPBUDDUI
Model LC-SDNSODZU Model LC-55N8002U Model LC-GSNSUOZU
Dimension Without Stand 44 x 25.8 x 3.2 lncnes 48 5 x 251 X 3 3 inches 57 2 x 33 x 3 3 lnches
(WXHXD) (111ax655x82mm) (1233x715x33mm) (1452xa37xa5mm)
With Sland 44 X 27 3 fl 9 8 lrlches 48 5 X 29.9 it 9.8 Inches 57.2 it 34 4 X 12.2 Inches
(1118x594x249 mm) (1233X7GDX249 mm) (1452x875’f310 mm)
Weight Without stand 31.5 lbs (14.3 kg) 35 8 lbs (16.7 kg) 55.1 lbs (25 kg)
Witn Stand 32.2 lbs (14.6 kg) 37 5 lbs 117 0 kg) 55 3 lbs (25 3 kg)
Active Screen Size (Diagonal) 49.5 inches 54 6 lnches 64.5 inches
Screen Resolution 3840 x 2160
AudiuPuwer 10W+10W 10W+1OW 15W+15W
Power Consumpllon 145W 170W 230W
Power Supply 120 v - 60 Hz
Connectivity Bulll-in ereless feature (2x2 dual band)
KeyApps Netfllx. Vudu. YcuTube, Amazon Instant Vldeo, Pandora and Opera App (Some apps only for USA)
Ports 4 HDMl pol-rs. 3 USB pans. LAN ponlor Ethernet. 1 DlgltalAudia Output. 1 RF Input. 1 EarphoneAudlo Output. 1 RCA
Composite Video Input . 1 lefl/rlgntAudio lnputior Composlte. 1 RCA Component Vldeo Input
OtnerVeatures Smart TV, AduoDrmrnlng. Dynamlo contrast Ploture. VESA standard wall mount support. Web browser. Parental Control
and Closed Capllon, Hign oynamlc Range processing
Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or
otherwise.
17
QUICK PROBLEM-SOLVING TIPS
When you experience an issue with yourTV, turn it off and on again. iilhis does not resoive the probiem. then refer lo the tips below. If
the problem is still not resolved. then Contact us at one oiihe phone numbers on Page 2.
ISSUES
No sound or picture
I have conneoled an external
source to my Tv and I gel no
picture and/0r eound.
When l turn on my TV, there is a
delay tor a tew seconds oetore lhe
picture appears. ls his normal?
The picture is normal but there is
no sound
Sound but no picture or black and
while picture
The sound and/or piclure is
distorted or appeals wavy
The sound and picture is blurry or
cuts out
A horizontal or vertical stripe
appears on the picture and/orthe
picture is shaking
POSSIBLE SOLUTIONS
~ Check lrlhe power cord is plugged into a powered AC oullet
- Press the @ Power button on the remote control to activate the unit irom 'Siandby‘ mode
~ Check to see lithe LED light is on or not if lt ls, lhen the TV is recelVlng power
~ Check tor the correct output connection on the external source and lor the correct input connection on the TV.
~ Make sure you have made the correct selection lor the input mode lor the incoming signal.
- Ves. this is normal. The TV is initializing and searching tor prevrous setting Information.
- Check the voiurne sailings.
- Check it 'Mute' mode is set to On.
- lithe picture is biack and white. unplug the TV irom the AC outlet and replug it alter so seconds
- Check that the Color is set to so or higher.
- Try olllerent TV channels
- An electric appliance may be arlectlng the TV. Turn cit any appliances that are nearby and move it larther away
from the TV,
- insert the power piug oi the TV set into another power outlet.
. ll using an externai antenna. check the direction. position and conneclion orlhe antenna.
. Adyusl the direcilorl oi your anlenna or resel or fine tune the channel
. Check ii there is an appliance or electric tool nearby thal is causing lnlerference
la
The plastic cabinet makes a - The ‘click' sound can occurwhen the temperature ot the televlslon changes. Thls change causes the television
'clicking" type ct sound cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.
- Confirm that TV stlll has power and is operational.
The remote control does not work - Change the batteries m the remote control.
- Check it the batterles are correctly installed
Need more help?
Additional help is available online at support links on Page
2. You will find answers to frequently asked questions,
downloadable firmware and more.
t9
certification and com pliance set forth for an uncontrolled envlronment. Thls devlce should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
FCC Notice
Manufactured under llcense from Dolby Laboratorles Dolby. Dolby Audlo. and
This device has been tested and found to comply Wlth the limlts 90an the doublerD symbol are trademarks or Dolby Laboratories.
for a Class B digltal device pursuant to Part 15 of the FCC Rules. ‘UD‘O
These llmlts are designed to provide reasonable protection The terms HDMl and HDMl nghrDefinItIon Multlrnedla lnlerface.
agalnst harmful lnterference in a residential installatlon. Thls Hnml and ”‘5 HDM‘ “3° are trademarks ””eg‘sw'e" trademarks
, ofHDMl Llcerlslrlg LLC ll't the Urrlted States and otherwuntrles
devlce generates. uses. and can radlate radio frequency energy
and, if not installed and used in accordance Wlth the instructions.
may cause harmful interference to radio communlcations.
m Manufactured under license from THAT Corporation
THAT Corporatlon, dbx-tv, Total Sonlcs. Total Surround
However, there ls no guarantee that lnterference will not occur in and Total Volume are registered trademarks of THAT
a particular installatlon. If thls devlce does cause harmful inter— Corporatlon Total Technology is a trademark ofTHAT Corporation
ference to radio or televislon reception. whlch can be determlned
by turnan the device off and on, the user is encouraged to try to
correct the interference by one or more of the foIIoWlng measures: .“
- Reorlent or relocate the recelving antenna "
- lncrease the separation between the devlce and receiver _
- Connect the devlce lnto an outlet on a circult dlfferent from that
to whlch the recelver is connected.
- Consult the dealer or an experienced radlo/TV technlcian for
help.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the
user’s authority to operate the equipment.
The Wl-Fi Module complies with FCC radiatlon exposure Ilmits
©2017. All rights reserved. SHARP and the SHARP logo are reglstered
trademarks of SHARP. Other brand and product names are registered
trademarks of their respective owners.
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2017:03:27 10:35:03+08:00
Create Date                     : 2017:03:27 10:34:52+08:00
Metadata Date                   : 2017:03:27 10:35:03+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:9761912a-62b8-438f-bbf7-20c468f7e0be
Instance ID                     : uuid:08fe5521-4eb5-4778-a4d2-331d33b3f440
Producer                        : Adobe PDF Library 10.0.1
Has XFA                         : No
Page Count                      : 9
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools